4 files changed, 25 insertions, 25 deletions

diff --git a/docs/dev/README.md b/docs/dev/README.md
index ba24524f2..8d7e18010 100644
--- a/docs/dev/README.md
+++ b/docs/dev/README.md
@@ -80,7 +80,7 @@ In general, I use one of the following workflows for fixing bugs and
 implementing features.
 
 If the problem concerns only internal parts of rust-analyzer (ie, I don't need
-to touch `ra_lsp_server` crate or typescript code), there is a unit-test for it.
+to touch `rust-analyzer` crate or typescript code), there is a unit-test for it.
 So, I use **Rust Analyzer: Run** action in VS Code to run this single test, and
 then just do printf-driven development/debugging. As a sanity check after I'm
 done, I use `cargo xtask install --server` and **Reload Window** action in VS
@@ -88,17 +88,17 @@ Code to sanity check that the thing works as I expect.
 
 If the problem concerns only the VS Code extension, I use **Run Extension**
 launch configuration from `launch.json`. Notably, this uses the usual
-`ra_lsp_server` binary from `PATH`. For this it is important to have the following
+`rust-analyzer` binary from `PATH`. For this it is important to have the following
 in `setting.json` file:
 ```json
 {
-    "rust-analyzer.raLspServerPath": "ra_lsp_server"
+    "rust-analyzer.serverPath": "rust-analyzer"
 }
 ```
 After I am done with the fix, I use `cargo
 xtask install --client-code` to try the new extension for real.
 
-If I need to fix something in the `ra_lsp_server` crate, I feel sad because it's
+If I need to fix something in the `rust-analyzer` crate, I feel sad because it's
 on the boundary between the two processes, and working there is slow. I usually
 just `cargo xtask install --server` and poke changes from my live environment.
 Note that this uses `--release`, which is usually faster overall, because
@@ -113,7 +113,7 @@ communication, and `print!` would break it.
 If I need to fix something simultaneously in the server and in the client, I
 feel even more sad. I don't have a specific workflow for this case.
 
-Additionally, I use `cargo run --release -p ra_lsp_server -- analysis-stats
+Additionally, I use `cargo run --release -p rust-analyzer -- analysis-stats
 path/to/some/rust/crate` to run a batch analysis. This is primarily useful for
 performance optimizations, or for bug minimization.
 
@@ -148,7 +148,7 @@ There's also two VS Code commands which might be of interest:
 * `Rust Analyzer: Status` shows some memory-usage statistics. To take full
   advantage of it, you need to compile rust-analyzer with jemalloc support:
   ```
-  $ cargo install --path crates/ra_lsp_server --force --features jemalloc
+  $ cargo install --path crates/rust-analyzer --force --features jemalloc
   ```
 
   There's an alias for this: `cargo xtask install --server --jemalloc`.
@@ -170,12 +170,12 @@ In particular, I have `export RA_PROFILE='*>10'` in my shell profile.
 To measure time for from-scratch analysis, use something like this:
 
 ```
-$ cargo run --release -p ra_lsp_server -- analysis-stats ../chalk/
+$ cargo run --release -p rust-analyzer -- analysis-stats ../chalk/
 ```
 
 For measuring time of incremental analysis, use either of these:
 
 ```
-$ cargo run --release -p ra_lsp_server -- analysis-bench ../chalk/ --highlight ../chalk/chalk-engine/src/logic.rs
-$ cargo run --release -p ra_lsp_server -- analysis-bench ../chalk/ --complete ../chalk/chalk-engine/src/logic.rs:94:0
+$ cargo run --release -p rust-analyzer -- analysis-bench ../chalk/ --highlight ../chalk/chalk-engine/src/logic.rs
+$ cargo run --release -p rust-analyzer -- analysis-bench ../chalk/ --complete ../chalk/chalk-engine/src/logic.rs:94:0
 ```
diff --git a/docs/dev/architecture.md b/docs/dev/architecture.md
index 41c3909f7..0343b6c81 100644
--- a/docs/dev/architecture.md
+++ b/docs/dev/architecture.md
@@ -134,7 +134,7 @@ APIs in this crate are IDE centric: they take text offsets as input and produce
 offsets and strings as output. This works on top of rich code model powered by
 `hir`.
 
-### `crates/ra_lsp_server`
+### `crates/rust-analyzer`
 
 An LSP implementation which wraps `ra_ide` into a language server protocol.
 
@@ -153,7 +153,7 @@ Rust Analyzer has three interesting [systems
 boundaries](https://www.tedinski.com/2018/04/10/making-tests-a-positive-influence-on-design.html)
 to concentrate tests on.
 
-The outermost boundary is the `ra_lsp_server` crate, which defines an LSP
+The outermost boundary is the `rust-analyzer` crate, which defines an LSP
 interface in terms of stdio. We do integration testing of this component, by
 feeding it with a stream of LSP requests and checking responses. These tests are
 known as "heavy", because they interact with Cargo and read real files from
@@ -162,7 +162,7 @@ in a statically typed language, it's hard to make an error in the protocol
 itself if messages are themselves typed.
 
 The middle, and most important, boundary is `ra_ide`. Unlike
-`ra_lsp_server`, which exposes API, `ide` uses Rust API and is intended to
+`rust-analyzer`, which exposes API, `ide` uses Rust API and is intended to
 use by various tools. Typical test creates an `AnalysisHost`, calls some
 `Analysis` functions and compares the results against expectation.
 
diff --git a/docs/dev/debugging.md b/docs/dev/debugging.md
index e6b082156..bece6a572 100644
--- a/docs/dev/debugging.md
+++ b/docs/dev/debugging.md
@@ -22,8 +22,8 @@ where **only** the `rust-analyzer` extension being debugged is enabled.
 
 ## Debug TypeScript VSCode extension
 
-- `Run Extension` - runs the extension with the globally installed `ra_lsp_server` binary.
-- `Run Extension (Dev Server)` - runs extension with the locally built LSP server (`target/debug/ra_lsp_server`).
+- `Run Extension` - runs the extension with the globally installed `rust-analyzer` binary.
+- `Run Extension (Dev Server)` - runs extension with the locally built LSP server (`target/debug/rust-analyzer`).
 
 TypeScript debugging is configured to watch your source edits and recompile.
 To apply changes to an already running debug process press <kbd>Ctrl+Shift+P</kbd> and run the following command in your `[Extension Development Host]`
@@ -47,13 +47,13 @@ To apply changes to an already running debug process press <kbd>Ctrl+Shift+P</kb
     debug = 2
   ```
 
-- Select `Run Extension (Dev Server)` to run your locally built `target/debug/ra_lsp_server`.
+- Select `Run Extension (Dev Server)` to run your locally built `target/debug/rust-analyzer`.
 
 - In the original VSCode window once again select the `Attach To Server` debug configuration.
 
-- A list of running processes should appear. Select the `ra_lsp_server` from this repo.
+- A list of running processes should appear. Select the `rust-analyzer` from this repo.
 
-- Navigate to `crates/ra_lsp_server/src/main_loop.rs` and add a breakpoint to the `on_task` function.
+- Navigate to `crates/rust-analyzer/src/main_loop.rs` and add a breakpoint to the `on_task` function.
 
 - Go back to the `[Extension Development Host]` instance and hover over a Rust variable and your breakpoint should hit.
 
@@ -64,15 +64,15 @@ To apply changes to an already running debug process press <kbd>Ctrl+Shift+P</kb
 
 ## Troubleshooting
 
-### Can't find the `ra_lsp_server` process
+### Can't find the `rust-analyzer` process
 
 It could be a case of just jumping the gun.
 
-The `ra_lsp_server` is only started once the `onLanguage:rust` activation.
+The `rust-analyzer` is only started once the `onLanguage:rust` activation.
 
 Make sure you open a rust file in the `[Extension Development Host]` and try again.
 
-### Can't connect to `ra_lsp_server`
+### Can't connect to `rust-analyzer`
 
 Make sure you have run `echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope`.
 
diff --git a/docs/user/readme.adoc b/docs/user/readme.adoc
index 8f741aaa9..74fda0abe 100644
--- a/docs/user/readme.adoc
+++ b/docs/user/readme.adoc
@@ -64,14 +64,14 @@ To make VS Code use the freshly build server, add this to the settings:
 
 [source,json]
 ----
-{ "rust-analyzer.raLspServerPath": "ra_lsp_server" }
+{ "rust-analyzer.serverPath": "rust-analyzer" }
 ----
 
 Note that installing via `xtask install` does not work for VS Code Remote, instead you'll need to install the `.vsix` manually.
 
 === Language Server Binary
 
-Other editors generally require `ra_lsp_server` binary to be in `$PATH`.
+Other editors generally require `rust-analyzer` binary to be in `$PATH`.
 You can download pre-build binary from
 https://github.com/rust-analyzer/rust-analyzer/releases[releases]
 page, or you can install it from source using the following command:
@@ -102,7 +102,7 @@ The are several LSP client implementations for vim:
 2. Run `:CocInstall coc-rust-analyzer` to install
    https://github.com/fannheyward/coc-rust-analyzer[coc-rust-analyzer],
    this extension implements _most_ of the features supported in the VSCode extension:
-   * same configurations as VSCode extension, `rust-analyzer.raLspServerPath`, `rust-analyzer.enableCargoWatchOnStartup` etc.
+   * same configurations as VSCode extension, `rust-analyzer.serverPath`, `rust-analyzer.enableCargoWatchOnStartup` etc.
    * same commands too, `rust-analyzer.analyzerStatus`, `rust-analyzer.startCargoWatch` etc.
    * highlighting and inlay_hints are not implemented yet
 
@@ -117,7 +117,7 @@ The are several LSP client implementations for vim:
 [source,vim]
 ----
 let g:LanguageClient_serverCommands = {
-\ 'rust': ['ra_lsp_server'],
+\ 'rust': ['rust-analyzer'],
 \ }
 ----
 
@@ -142,7 +142,7 @@ Installation:
 [source,json]
 ----
 "rust-analyzer": {
-    "command": ["ra_lsp_server"],
+    "command": ["rust-analyzer"],
     "languageId": "rust",
     "scopes": ["source.rust"],
     "syntaxes": [