initHEADmaster

196 files changed, 65622 insertions, 0 deletions

diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/Makefile b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/Makefile
new file mode 100644
index 000000000..3fc247bd4
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/Makefile
@@ -0,0 +1,206 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../../../ChibiOS
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(ALLCSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC = $(ALLCPPSRC)
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
+
+INCDIR = $(ALLINC) $(TESTINC) $(CHIBIOS_CONTRIB)/os/various/
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/rules.mk
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/chconf.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/chconf.h
new file mode 100644
index 000000000..c6e3413db
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/chconf.h
@@ -0,0 +1,757 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_1_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name OSLIB options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     TRUE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                TRUE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    TRUE
+#endif
+
+/**
+ * @brief   Objects Caches APIs.
+ * @details If enabled then the objects caches APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_CACHES)
+#define CH_CFG_USE_OBJ_CACHES               TRUE
+#endif
+
+/**
+ * @brief   Delegate threads APIs.
+ * @details If enabled then the delegate threads APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_DELEGATES)
+#define CH_CFG_USE_DELEGATES                TRUE
+#endif
+
+/**
+ * @brief   Jobs Queues APIs.
+ * @details If enabled then the jobs queues APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_JOBS)
+#define CH_CFG_USE_JOBS                     TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  TRUE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf.h
new file mode 100644
index 000000000..30b3e45ac
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf.h
@@ -0,0 +1,533 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_1_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         TRUE
+#endif
+
+/**
+ * @brief   Enables the EFlash subsystem.
+ */
+#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__)
+#define HAL_USE_EFL                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#include "halconf_community.h"
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf_community.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf_community.h
new file mode 100644
index 000000000..242bfc00f
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/halconf_community.h
@@ -0,0 +1,187 @@
+/*
+    ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
+
+/**
+ * @brief   Enables the community overlay.
+ */
+#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
+#define HAL_USE_COMMUNITY           TRUE
+#endif
+
+/**
+ * @brief   Enables the FSMC subsystem.
+ */
+#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
+#define HAL_USE_FSMC                FALSE
+#endif
+
+/**
+ * @brief   Enables the SDRAM subsystem.
+ */
+#if !defined(HAL_USE_SDRAM) || defined(__DOXYGEN__)
+#define HAL_USE_SDRAM               FALSE
+#endif
+
+/**
+ * @brief   Enables the SRAM subsystem.
+ */
+#if !defined(HAL_USE_SRAM) || defined(__DOXYGEN__)
+#define HAL_USE_SRAM                FALSE
+#endif
+
+/**
+ * @brief   Enables the NAND subsystem.
+ */
+#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
+#define HAL_USE_NAND                FALSE
+#endif
+
+/**
+ * @brief   Enables the 1-wire subsystem.
+ */
+#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
+#define HAL_USE_ONEWIRE             FALSE
+#endif
+
+/**
+ * @brief   Enables the EICU subsystem.
+ */
+#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
+#define HAL_USE_EICU                FALSE
+#endif
+
+/**
+ * @brief   Enables the CRC subsystem.
+ */
+#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
+#define HAL_USE_CRC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RNG subsystem.
+ */
+#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
+#define HAL_USE_RNG                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP                TRUE
+#endif
+
+/**
+ * @brief   Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD             FALSE
+#endif
+
+/*===========================================================================*/
+/* FSMCNAND driver related settings.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define NAND_USE_MUTUAL_EXCLUSION   TRUE
+#endif
+
+/*===========================================================================*/
+/* 1-wire driver related settings.                                           */
+/*===========================================================================*/
+/**
+ * @brief   Enables strong pull up feature.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_STRONG_PULLUP   FALSE
+
+/**
+ * @brief   Enables search ROM feature.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_SEARCH_ROM      TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD    FALSE
+#endif
+
+/**
+ * @brief   Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX     FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables 24xx series I2C eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief   Enables 25xx series SPI eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
+#endif /* HALCONF_COMMUNITY_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/main.c b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/main.c
new file mode 100644
index 000000000..52bf36cc9
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/main.c
@@ -0,0 +1,143 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#define DAC_BUFFER_SIZE 360
+
+/*
+ * DAC test buffer (sine wave).
+ */
+static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = {
+  2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437,
+  2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846,
+  2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221,
+  3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544,
+  3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801,
+  3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982,
+  3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078,
+  4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086,
+  4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004,
+  3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837,
+  3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591,
+  3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278,
+  3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912,
+  2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507,
+  2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082,
+  2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657,
+  1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248,
+  1215, 1182, 1150, 1118, 1086, 1055, 1024,  993,  963,  933,  903,  873,
+   844,  816,  787,  759,  732,  705,  678,  651,  626,  600,  575,  550,
+   526,  503,  479,  457,  434,  413,  391,  371,  350,  331,  312,  293,
+   275,  257,  240,  224,  208,  192,  177,  163,  150,  136,  124,  112,
+   101,   90,   80,   70,   61,   53,   45,   38,   32,   26,   20,   16,
+    12,    8,    5,    3,    2,    1,    0,    1,    2,    3,    5,    8,
+    12,   16,   20,   26,   32,   38,   45,   53,   61,   70,   80,   90,
+   101,  112,  124,  136,  150,  163,  177,  192,  208,  224,  240,  257,
+   275,  293,  312,  331,  350,  371,  391,  413,  434,  457,  479,  503,
+   526,  550,  575,  600,  626,  651,  678,  705,  732,  759,  787,  816,
+   844,  873,  903,  933,  963,  993, 1024, 1055, 1086, 1118, 1150, 1182,
+  1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587,
+  1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012
+};
+
+static const DACConfig dac1cfg1 = {
+  .init         = 2047U,
+  .datamode     = DAC_DHRM_12BIT_RIGHT,
+  .cr           = 0
+};
+
+static const DACConversionGroup dacgrpcfg1 = {
+  .num_channels = 1U,
+  .end_cb       = NULL,
+  .error_cb     = NULL,
+  .trigger      = DAC_TRG(0)
+};
+
+/*
+ * GPT6 configuration.
+ */
+static const GPTConfig gpt6cfg1 = {
+  .frequency    = 10000U,
+  .callback     = NULL,
+  .cr2          = TIM_CR2_MMS_1,    /* MMS = 010 = TRGO on Update Event.    */
+  .dier         = 0U
+};
+
+void comp2_cb(COMPDriver *comp) {
+
+  /* Check if output is high (rising) */
+  if (comp->reg->CSR & COMP_CSR_COMPxOUT) {
+
+    palToggleLine(LINE_LED_RED);
+  }
+
+}
+
+static const COMPConfig comp2_conf = {
+  COMP_OUTPUT_NORMAL,
+  COMP_IRQ_RISING,
+  comp2_cb,
+  STM32_COMP_InvertingInput_VREFINT
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  halInit();
+  chSysInit();
+
+  /*
+  * Set PA3 - PA4 to Analog (DAC1_CH1, COMP2_INP)
+  * You will have to connect these with a jumper wire
+  */
+  palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_ANALOG);
+  palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG);
+
+  /*
+   * Set PA2 to alternate 8 (COMP2_OUT)
+   * You can connect this to an oscilloscope along with PA4 to compare input/output.
+   */
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(8));
+
+  /*
+   * Start peripherals
+   */
+  dacStart(&DACD1, &dac1cfg1);
+  compStart(&COMPD2, &comp2_conf);
+  gptStart(&GPTD6, &gpt6cfg1);
+
+  /*
+   * Starting a continuous conversion.
+   */
+  dacStartConversion(&DACD1, &dacgrpcfg1, dac_buffer, DAC_BUFFER_SIZE);
+  gptStartContinuous(&GPTD6, 2U);
+
+  compEnable(&COMPD2);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+
+    chThdSleepMilliseconds(250);
+    palToggleLine(LINE_LED_GREEN);
+  }
+  return 0;
+}
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf.h
new file mode 100644
index 000000000..4383befac
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf.h
@@ -0,0 +1,216 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_IRQ_EXTI16_IRQ_PRIORITY       3
+#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 3)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM6_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#include "mcuconf_community.h"
+
+#endif /* MCUCONF_H */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf_community.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf_community.h
new file mode 100644
index 000000000..af7418613
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/COMP/mcuconf_community.h
@@ -0,0 +1,157 @@
+/*
+    ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * FSMC driver system settings.
+ */
+#define STM32_FSMC_USE_FSMC1                FALSE
+#define STM32_FSMC_FSMC1_IRQ_PRIORITY       10
+
+/*
+ * FSMC NAND driver system settings.
+ */
+#define STM32_NAND_USE_NAND1           FALSE
+#define STM32_NAND_USE_NAND2           FALSE
+#define STM32_NAND_USE_EXT_INT              FALSE
+#define STM32_NAND_DMA_STREAM               STM32_DMA_STREAM_ID(2, 7)
+#define STM32_NAND_DMA_PRIORITY             0
+#define STM32_NAND_DMA_ERROR_HOOK(nandp)    osalSysHalt("DMA failure")
+
+/*
+ * FSMC SRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SRAM                 FALSE
+#define STM32_SRAM_USE_FSMC_SRAM1           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM2           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM3           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM4           FALSE
+
+/*
+ * FSMC SDRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SDRAM                FALSE
+#define STM32_SDRAM_USE_FSMC_SDRAM1         FALSE
+#define STM32_SDRAM_USE_FSMC_SDRAM2         FALSE
+
+/*
+ * TIMCAP driver system settings.
+ */
+#define STM32_TIMCAP_USE_TIM1                  FALSE
+#define STM32_TIMCAP_USE_TIM2                  FALSE
+#define STM32_TIMCAP_USE_TIM3                  FALSE
+#define STM32_TIMCAP_USE_TIM4                  FALSE
+#define STM32_TIMCAP_USE_TIM5                  FALSE
+#define STM32_TIMCAP_USE_TIM8                  FALSE
+#define STM32_TIMCAP_USE_TIM9                  FALSE
+#define STM32_TIMCAP_TIM1_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM2_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM3_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM4_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM5_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM8_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM9_IRQ_PRIORITY         3
+
+/*
+ * COMP driver system settings.
+ */
+#define STM32_COMP_USE_COMP1                  FALSE
+#define STM32_COMP_USE_COMP2                  TRUE
+#define STM32_COMP_USE_COMP3                  FALSE
+#define STM32_COMP_USE_COMP4                  FALSE
+#define STM32_COMP_USE_COMP5                  FALSE
+#define STM32_COMP_USE_COMP6                  FALSE
+#define STM32_COMP_USE_COMP7                  FALSE
+
+#define STM32_COMP_USE_INTERRUPTS             TRUE
+#define STM32_COMP_1_2_3_IRQ_PRIORITY         5
+#define STM32_COMP_4_5_6_IRQ_PRIORITY         5
+#define STM32_COMP_7_IRQ_PRIORITY             5
+
+#if STM32_COMP_USE_INTERRUPTS
+#define STM32_DISABLE_EXTI21_22_29_HANDLER
+#define STM32_DISABLE_EXTI30_32_HANDLER
+#define STM32_DISABLE_EXTI33_HANDLER
+#endif
+
+/*
+ * USBH driver system settings.
+ */
+#define STM32_OTG_FS_CHANNELS_NUMBER          8
+#define STM32_OTG_HS_CHANNELS_NUMBER          12
+
+#define STM32_USBH_USE_OTG1                 1
+#define STM32_OTG_FS_RXFIFO_SIZE              1024
+#define STM32_OTG_FS_PTXFIFO_SIZE             128
+#define STM32_OTG_FS_NPTXFIFO_SIZE            128
+
+#define STM32_USBH_USE_OTG2                 0
+#define STM32_OTG_HS_RXFIFO_SIZE              2048
+#define STM32_OTG_HS_PTXFIFO_SIZE             1024
+#define STM32_OTG_HS_NPTXFIFO_SIZE            1024
+
+#define STM32_USBH_MIN_QSPACE               4
+#define STM32_USBH_CHANNELS_NP              4
+
+/*
+ * CRC driver system settings.
+ */
+#define STM32_CRC_USE_CRC1                  FALSE
+#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY     1
+#define STM32_CRC_CRC1_DMA_PRIORITY         2
+#define STM32_CRC_CRC1_DMA_STREAM           STM32_DMA1_STREAM2
+
+#define CRCSW_USE_CRC1                      FALSE
+#define CRCSW_CRC32_TABLE                   TRUE
+#define CRCSW_CRC16_TABLE                   TRUE
+#define CRCSW_PROGRAMMABLE                  TRUE
+
+/*
+ * EICU driver system settings.
+ */
+#define STM32_EICU_USE_TIM1                 FALSE
+#define STM32_EICU_USE_TIM2                 FALSE
+#define STM32_EICU_USE_TIM3                 FALSE
+#define STM32_EICU_USE_TIM4                 FALSE
+#define STM32_EICU_USE_TIM5                 FALSE
+#define STM32_EICU_USE_TIM8                 FALSE
+#define STM32_EICU_USE_TIM9                 FALSE
+#define STM32_EICU_USE_TIM10                FALSE
+#define STM32_EICU_USE_TIM11                FALSE
+#define STM32_EICU_USE_TIM12                FALSE
+#define STM32_EICU_USE_TIM13                FALSE
+#define STM32_EICU_USE_TIM14                FALSE
+#define STM32_EICU_TIM1_IRQ_PRIORITY        7
+#define STM32_EICU_TIM2_IRQ_PRIORITY        7
+#define STM32_EICU_TIM3_IRQ_PRIORITY        7
+#define STM32_EICU_TIM4_IRQ_PRIORITY        7
+#define STM32_EICU_TIM5_IRQ_PRIORITY        7
+#define STM32_EICU_TIM8_IRQ_PRIORITY        7
+#define STM32_EICU_TIM9_IRQ_PRIORITY        7
+#define STM32_EICU_TIM10_IRQ_PRIORITY       7
+#define STM32_EICU_TIM11_IRQ_PRIORITY       7
+#define STM32_EICU_TIM12_IRQ_PRIORITY       7
+#define STM32_EICU_TIM13_IRQ_PRIORITY       7
+#define STM32_EICU_TIM14_IRQ_PRIORITY       7
+
+/*
+ * QEI driver system settings.
+ */
+#define STM32_QEI_USE_TIM1                FALSE
+#define STM32_QEI_USE_TIM2                FALSE
+#define STM32_QEI_USE_TIM3                FALSE
+#define STM32_QEI_TIM1_IRQ_PRIORITY         3
+#define STM32_QEI_TIM2_IRQ_PRIORITY         3
+#define STM32_QEI_TIM3_IRQ_PRIORITY         3
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/Makefile b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/Makefile
new file mode 100644
index 000000000..e57194c76
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/Makefile
@@ -0,0 +1,212 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../../../ChibiOS
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
+include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+include $(CHIBIOS)/os/various/shell/shell.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(ALLCSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC = $(ALLCPPSRC)
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
+
+INCDIR = $(ALLINC) $(TESTINC) $(CHIBIOS_CONTRIB)/os/various/
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/rules.mk
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/chconf.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/chconf.h
new file mode 100644
index 000000000..9184ea8df
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/chconf.h
@@ -0,0 +1,757 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_1_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name OSLIB options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     TRUE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                TRUE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    TRUE
+#endif
+
+/**
+ * @brief   Objects Caches APIs.
+ * @details If enabled then the objects caches APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_CACHES)
+#define CH_CFG_USE_OBJ_CACHES               TRUE
+#endif
+
+/**
+ * @brief   Delegate threads APIs.
+ * @details If enabled then the delegate threads APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_DELEGATES)
+#define CH_CFG_USE_DELEGATES                TRUE
+#endif
+
+/**
+ * @brief   Jobs Queues APIs.
+ * @details If enabled then the jobs queues APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_JOBS)
+#define CH_CFG_USE_JOBS                     TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  TRUE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                TRUE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 TRUE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf.h
new file mode 100644
index 000000000..d7cc0b65e
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf.h
@@ -0,0 +1,533 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_1_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the EFlash subsystem.
+ */
+#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__)
+#define HAL_USE_EFL                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#include "halconf_community.h"
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf_community.h b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf_community.h
new file mode 100644
index 000000000..fe363263a
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/halconf_community.h
@@ -0,0 +1,187 @@
+/*
+    ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
+
+/**
+ * @brief   Enables the community overlay.
+ */
+#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
+#define HAL_USE_COMMUNITY           TRUE
+#endif
+
+/**
+ * @brief   Enables the FSMC subsystem.
+ */
+#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
+#define HAL_USE_FSMC                FALSE
+#endif
+
+/**
+ * @brief   Enables the SDRAM subsystem.
+ */
+#if !defined(HAL_USE_SDRAM) || defined(__DOXYGEN__)
+#define HAL_USE_SDRAM               FALSE
+#endif
+
+/**
+ * @brief   Enables the SRAM subsystem.
+ */
+#if !defined(HAL_USE_SRAM) || defined(__DOXYGEN__)
+#define HAL_USE_SRAM                FALSE
+#endif
+
+/**
+ * @brief   Enables the NAND subsystem.
+ */
+#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
+#define HAL_USE_NAND                FALSE
+#endif
+
+/**
+ * @brief   Enables the 1-wire subsystem.
+ */
+#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
+#define HAL_USE_ONEWIRE             FALSE
+#endif
+
+/**
+ * @brief   Enables the EICU subsystem.
+ */
+#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
+#define HAL_USE_EICU                FALSE
+#endif
+
+/**
+ * @brief   Enables the CRC subsystem.
+ */
+#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
+#define HAL_USE_CRC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RNG subsystem.
+ */
+#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
+#define HAL_USE_RNG                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP                FALSE
+#endif
+
+/**
+ * @brief   Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD             FALSE
+#endif
+
+/*===========================================================================*/
+/* FSMCNAND driver related settings.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define NAND_USE_MUTUAL_EXCLUSION   TRUE
+#endif
+
+/*===========================================================================*/
+/* 1-wire driver related settings.                                           */
+/*===========================================================================*/
+/**
+ * @brief   Enables strong pull up feature.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_STRONG_PULLUP   FALSE
+
+/**
+ * @brief   Enables search ROM feature.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_SEARCH_ROM      TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD    FALSE
+#endif
+
+/**
+ * @brief   Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX     FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables 24xx series I2C eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief   Enables 25xx series SPI eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
+#endif /* HALCONF_COMMUNITY_H */
+
+/** @} */
diff --git a/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/main.c b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/main.c
new file mode 100644
index 000000000..2b5aabf29
--- /dev/null
+++ b/lib/chibios-contrib/testhal/STM32/STM32F0xx/crc/main.c
@@ -0,0 +1,244 @@
+/*
+    ChibiOS - Copyright (C) 2015 Michael D. Spradling
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+
+/*
+ * Data used for CRC calculation.
+ */
+uint8_t data[] = {
+  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+  0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+  0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
+};
+
+uint32_t gCrc = 0;
+
+
+/*
+ * CRC Callback used with DMA testing
+ */
+void crc_callback(CRCDriver *crcp, uint32_t crc) {
+  (void)crcp;
+  gCrc = crc;
+}
+
+
+/*
+ * CRC32 configuration
+ */
+static const CRCConfig crc32_config = {
+  .poly_size         = 32,
+  .poly              = 0x04C11DB7,
+  .initial_val       = 0xFFFFFFFF,
+  .final_val         = 0xFFFFFFFF,
+  .reflect_data      = 1,
+  .reflect_remainder = 1
+};
+
+/*
+ * CRC16 configuration
+ */
+static const CRCConfig crc16_config = {
+  .poly_size         = 16,
+  .poly              = 0x8005,
+  .initial_val       = 0x0,
+  .final_val         = 0x0,
+  .reflect_data      = 1,
+  .reflect_remainder = 1
+};
+
+/*
+ * CRC OpenPGP 
+ */
+static const CRCConfig crc8_config = {
+  .poly_size         = 8,
+  .poly              = 0x07,
+  .initial_val       = 0x0,
+  .final_val         = 0x0,
+  .reflect_data      = 0,
+  .reflect_remainder = 0
+};
+
+
+#if CRC_USE_DMA == TRUE
+/*
+ * CRC32 configuration with DMA
+ */
+static const CRCConfig crc32_dma_config = {
+  .poly_size         = 32,
+  .poly              = 0x04C11DB7,
+  .initial_val       = 0xFFFFFFFF,
+  .final_val         = 0xFFFFFFFF,
+  .reflect_data      = 1,
+  .reflect_remainder = 1,
+  .end_cb = crc_callback
+};
+
+/*
+ * CRC16 configuration with DMA
+ */
+static const CRCConfig crc16_dma_config = {
+  .poly_size         = 16,
+  .poly              = 0x8005,
+  .initial_val       = 0x0,
+  .final_val         = 0x0,
+  .reflect_data      = 1,
+  .reflect_remainder = 1,
+  .end_cb = crc_callback
+};
+#endif
+
+
+static void testCrc(const CRCConfig *config, uint32_t result) {
+  uint32_t crc;
+
+  crcAcquireUnit(&CRCD1);             /* Acquire ownership of the bus.    */
+  crcStart(&CRCD1, config);           /* Activate CRC driver              */
+  crcReset(&CRCD1);
+  crc = crcCalc(&CRCD1, sizeof(data), &data);
+  osalDbgAssert(crc == result, "CRC does not match expected result");
+  crcStop(&CRCD1);                    /* Deactive CRC driver);            */
+  crcReleaseUnit(&CRCD1);             /* Acquire ownership of the bus.    */
+}
+
+
+#if CRC_USE_DMA
+static void testCrcDma(const CRCConfig *config, uint32_t result) {
+  gCrc = 0;
+
+  crcAcquireUnit(&CRCD1);             /* Acquire ownership of the bus.    */
+  crcStart(&CRCD1, config);           /* Activate CRC driver              */
+  crcReset(&CRCD1);
+  crcStartCalc(&CRCD1, sizeof(data), &data);
+  while (gCrc == 0);                  /* Wait for callback to verify      */
+  crcStop(&CRCD1);                    /* Deactive CRC driver);            */
+  crcReleaseUnit(&CRCD1);             /* Acquire ownership of the bus.    */
+
+  osalDbgAssert(gCrc == result, "CRC does not match expected result");
+}
+#endif
+
+/*
+ * CRC thread
+ */
+static THD_WORKING_AREA(crc_thread_1_wa, 256);
+static THD_FUNCTION(crc_thread_1, p) {
+  (void)p;
+  chRegSetThreadName("CRC thread 1");
+  while (true) {
+
+/* Test ST hardware CRC */
+/* if CRC_USE_DMA == TRUE these sync function internally use DMA and put the
+ * calling thread to sleep */
+#if STM32_CRC_USE_CRC1 == TRUE
+    /* CRC32 Calculation */
+    testCrc(&crc32_config, 0x91267e8a);
+    /* CRC16 Calculation */
+    testCrc(&crc16_config, 0xc36a);
+    /* CRC8 Calculation */
+    testCrc(&crc8_config, 0x06);
+
+/* Test ST CRC with DMA */
+#if CRC_USE_DMA == TRUE
+    /* CRC32 Calculation */
+    testCrcDma(&crc32_dma_config, 0x91267e8a);
+    /* CRC16 Calculation */
+    testCrcDma(&crc16_dma_config, 0xc36a);
+#endif
+
+#endif /* STM32_CRC_USE_CRC1 */
+
+
+/* Test software CRC */
+#if CRCSW_USE_CRC1 == TRUE
+/* Test CRCSW with compute CRC */
+#if CRCSW_PROGRAMMABLE == TRUE
+    /* CRC32 Calculation */
+    testCrc(&crc32_config, 0x91267e8a);
+    /* CRC16 Calculation */
+    testCrc(&crc16_config, 0xc36a);
+    testCrc(&crc8_config, 0x06);
+#endif
+/* Test CRCSW with table lookups.  */
+#if CRCSW_CRC32_TABLE == TRUE
+    /* CRC32 Calculation with table lookup */
+    testCrc(CRCSW_CRC32_TABLE_CONFIG, 0x91267e8a);
+#endif
+#if CRCSW_CRC16_TABLE == TRUE
+    /* CRC16 Calculation with table lookup */
+    testCrc(CRCSW_CRC16_TABLE_CONFIG, 0xc36a);
+#endif
+
+#endif /* CRCSW_USE_CRC1 */
+  }
+}
+
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED_RED);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOC, GPIOC_LED_RED);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Starting the CRC thread
+   */
+  chThdCreateStatic(crc_thread_1_wa, sizeof(crc_thread_1_wa),
+                    NORMALPRIO + 1, crc_thread_1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing.