1 files changed, 111 insertions, 0 deletions

diff --git a/keyboards/barleycorn_smd/config.h b/keyboards/barleycorn_smd/config.h
new file mode 100644
index 000000000..2ac86bf8a
--- /dev/null
+++ b/keyboards/barleycorn_smd/config.h
@@ -0,0 +1,111 @@
+/*
+Copyright 2021 Matthew Dias
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x7033
+#define PRODUCT_ID      0x4749
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    P3D Store
+#define PRODUCT         Barleycorn SMD
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 18
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
+#define MATRIX_ROW_PINS { F5, F4, F1, F0, F6 }
+#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, D5, D5, D5, D5, D5, D5, D5, D5, D5, D5 }
+#define UNUSED_PINS
+#define PORT_EXPANDER_ADDRESS 0x20
+
+#define RGB_DI_PIN E6
+#define RGBLED_NUM 15
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5 }
+
+#define LED_CAPS_LOCK_PIN B2
+#define LED_NUM_LOCK_PIN B3
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define USB_MAX_POWER_CONSUMPTION 400
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION