diff options
Diffstat (limited to 'lib/chibios/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h')
-rw-r--r-- | lib/chibios/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/lib/chibios/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h b/lib/chibios/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h new file mode 100644 index 000000000..29839c144 --- /dev/null +++ b/lib/chibios/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h | |||
@@ -0,0 +1,205 @@ | |||
1 | /* | ||
2 | ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | ||
3 | |||
4 | Licensed under the Apache License, Version 2.0 (the "License"); | ||
5 | you may not use this file except in compliance with the License. | ||
6 | You may obtain a copy of the License at | ||
7 | |||
8 | http://www.apache.org/licenses/LICENSE-2.0 | ||
9 | |||
10 | Unless required by applicable law or agreed to in writing, software | ||
11 | distributed under the License is distributed on an "AS IS" BASIS, | ||
12 | WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | ||
13 | See the License for the specific language governing permissions and | ||
14 | limitations under the License. | ||
15 | */ | ||
16 | |||
17 | #ifndef MCUCONF_H | ||
18 | #define MCUCONF_H | ||
19 | |||
20 | /* | ||
21 | * STM32F3xx drivers configuration. | ||
22 | * The following settings override the default settings present in | ||
23 | * the various device driver implementation headers. | ||
24 | * Note that the settings for each driver only have effect if the whole | ||
25 | * driver is enabled in halconf.h. | ||
26 | * | ||
27 | * IRQ priorities: | ||
28 | * 15...0 Lowest...Highest. | ||
29 | * | ||
30 | * DMA priorities: | ||
31 | * 0...3 Lowest...Highest. | ||
32 | */ | ||
33 | |||
34 | #define STM32F3xx_MCUCONF | ||
35 | |||
36 | /* | ||
37 | * HAL driver system settings. | ||
38 | */ | ||
39 | #define STM32_NO_INIT FALSE | ||
40 | #define STM32_PVD_ENABLE FALSE | ||
41 | #define STM32_PLS STM32_PLS_LEV0 | ||
42 | #define STM32_HSI_ENABLED TRUE | ||
43 | #define STM32_LSI_ENABLED TRUE | ||
44 | #define STM32_HSE_ENABLED FALSE | ||
45 | #define STM32_LSE_ENABLED FALSE | ||
46 | #define STM32_SW STM32_SW_PLL | ||
47 | #define STM32_PLLSRC STM32_PLLSRC_HSI | ||
48 | #define STM32_PREDIV_VALUE 1 | ||
49 | #define STM32_PLLMUL_VALUE 9 | ||
50 | #define STM32_HPRE STM32_HPRE_DIV1 | ||
51 | #define STM32_PPRE1 STM32_PPRE1_DIV2 | ||
52 | #define STM32_PPRE2 STM32_PPRE2_DIV2 | ||
53 | #define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | ||
54 | #define STM32_ADC12PRES STM32_ADC12PRES_DIV1 | ||
55 | #define STM32_USART1SW STM32_USART1SW_PCLK | ||
56 | #define STM32_USART2SW STM32_USART2SW_PCLK | ||
57 | #define STM32_USART3SW STM32_USART3SW_PCLK | ||
58 | #define STM32_I2C1SW STM32_I2C1SW_SYSCLK | ||
59 | #define STM32_TIM1SW STM32_TIM1SW_PCLK2 | ||
60 | #define STM32_RTCSEL STM32_RTCSEL_LSI | ||
61 | |||
62 | /* | ||
63 | * IRQ system settings. | ||
64 | */ | ||
65 | #define STM32_IRQ_EXTI0_PRIORITY 6 | ||
66 | #define STM32_IRQ_EXTI1_PRIORITY 6 | ||
67 | #define STM32_IRQ_EXTI2_PRIORITY 6 | ||
68 | #define STM32_IRQ_EXTI3_PRIORITY 6 | ||
69 | #define STM32_IRQ_EXTI4_PRIORITY 6 | ||
70 | #define STM32_IRQ_EXTI5_9_PRIORITY 6 | ||
71 | #define STM32_IRQ_EXTI10_15_PRIORITY 6 | ||
72 | #define STM32_IRQ_EXTI16_PRIORITY 6 | ||
73 | #define STM32_IRQ_EXTI17_PRIORITY 6 | ||
74 | #define STM32_IRQ_EXTI18_PRIORITY 6 | ||
75 | #define STM32_IRQ_EXTI19_PRIORITY 6 | ||
76 | #define STM32_IRQ_EXTI20_PRIORITY 6 | ||
77 | #define STM32_IRQ_EXTI21_22_29_PRIORITY 6 | ||
78 | #define STM32_IRQ_EXTI30_32_PRIORITY 6 | ||
79 | #define STM32_IRQ_EXTI33_PRIORITY 6 | ||
80 | |||
81 | /* | ||
82 | * ADC driver system settings. | ||
83 | */ | ||
84 | #define STM32_ADC_DUAL_MODE FALSE | ||
85 | #define STM32_ADC_COMPACT_SAMPLES FALSE | ||
86 | #define STM32_ADC_USE_ADC1 FALSE | ||
87 | #define STM32_ADC_USE_ADC2 FALSE | ||
88 | #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) | ||
89 | #define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | ||
90 | #define STM32_ADC_ADC1_DMA_PRIORITY 2 | ||
91 | #define STM32_ADC_ADC2_DMA_PRIORITY 2 | ||
92 | #define STM32_ADC_ADC12_IRQ_PRIORITY 5 | ||
93 | #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 | ||
94 | #define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 | ||
95 | #define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 | ||
96 | |||
97 | /* | ||
98 | * CAN driver system settings. | ||
99 | */ | ||
100 | #define STM32_CAN_USE_CAN1 FALSE | ||
101 | #define STM32_CAN_CAN1_IRQ_PRIORITY 11 | ||
102 | |||
103 | /* | ||
104 | * DAC driver system settings. | ||
105 | */ | ||
106 | #define STM32_DAC_DUAL_MODE FALSE | ||
107 | #define STM32_DAC_USE_DAC1_CH1 TRUE | ||
108 | #define STM32_DAC_USE_DAC1_CH2 TRUE | ||
109 | #define STM32_DAC_USE_DAC2_CH1 TRUE | ||
110 | #define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 | ||
111 | #define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 | ||
112 | #define STM32_DAC_DAC2_CH1_IRQ_PRIORITY 10 | ||
113 | #define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 | ||
114 | #define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 | ||
115 | #define STM32_DAC_DAC2_CH1_DMA_PRIORITY 2 | ||
116 | |||
117 | /* | ||
118 | * GPT driver system settings. | ||
119 | */ | ||
120 | #define STM32_GPT_USE_TIM1 FALSE | ||
121 | #define STM32_GPT_USE_TIM2 FALSE | ||
122 | #define STM32_GPT_USE_TIM3 FALSE | ||
123 | #define STM32_GPT_USE_TIM6 FALSE | ||
124 | #define STM32_GPT_USE_TIM7 FALSE | ||
125 | #define STM32_GPT_TIM1_IRQ_PRIORITY 7 | ||
126 | #define STM32_GPT_TIM2_IRQ_PRIORITY 7 | ||
127 | #define STM32_GPT_TIM3_IRQ_PRIORITY 7 | ||
128 | #define STM32_GPT_TIM6_IRQ_PRIORITY 7 | ||
129 | #define STM32_GPT_TIM7_IRQ_PRIORITY 7 | ||
130 | |||
131 | /* | ||
132 | * I2C driver system settings. | ||
133 | */ | ||
134 | #define STM32_I2C_USE_I2C1 FALSE | ||
135 | #define STM32_I2C_BUSY_TIMEOUT 50 | ||
136 | #define STM32_I2C_I2C1_IRQ_PRIORITY 10 | ||
137 | #define STM32_I2C_USE_DMA TRUE | ||
138 | #define STM32_I2C_I2C1_DMA_PRIORITY 1 | ||
139 | #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | ||
140 | |||
141 | /* | ||
142 | * ICU driver system settings. | ||
143 | */ | ||
144 | #define STM32_ICU_USE_TIM1 FALSE | ||
145 | #define STM32_ICU_USE_TIM2 FALSE | ||
146 | #define STM32_ICU_USE_TIM3 FALSE | ||
147 | #define STM32_ICU_TIM1_IRQ_PRIORITY 7 | ||
148 | #define STM32_ICU_TIM2_IRQ_PRIORITY 7 | ||
149 | #define STM32_ICU_TIM3_IRQ_PRIORITY 7 | ||
150 | |||
151 | /* | ||
152 | * PWM driver system settings. | ||
153 | */ | ||
154 | #define STM32_PWM_USE_ADVANCED FALSE | ||
155 | #define STM32_PWM_USE_TIM1 FALSE | ||
156 | #define STM32_PWM_USE_TIM2 FALSE | ||
157 | #define STM32_PWM_USE_TIM3 FALSE | ||
158 | #define STM32_PWM_TIM1_IRQ_PRIORITY 7 | ||
159 | #define STM32_PWM_TIM2_IRQ_PRIORITY 7 | ||
160 | #define STM32_PWM_TIM3_IRQ_PRIORITY 7 | ||
161 | |||
162 | /* | ||
163 | * SERIAL driver system settings. | ||
164 | */ | ||
165 | #define STM32_SERIAL_USE_USART1 FALSE | ||
166 | #define STM32_SERIAL_USE_USART2 TRUE | ||
167 | #define STM32_SERIAL_USE_USART3 FALSE | ||
168 | #define STM32_SERIAL_USART1_PRIORITY 12 | ||
169 | #define STM32_SERIAL_USART2_PRIORITY 12 | ||
170 | #define STM32_SERIAL_USART3_PRIORITY 12 | ||
171 | |||
172 | /* | ||
173 | * SPI driver system settings. | ||
174 | */ | ||
175 | #define STM32_SPI_USE_SPI1 FALSE | ||
176 | #define STM32_SPI_SPI1_DMA_PRIORITY 1 | ||
177 | #define STM32_SPI_SPI1_IRQ_PRIORITY 10 | ||
178 | #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | ||
179 | |||
180 | /* | ||
181 | * ST driver system settings. | ||
182 | */ | ||
183 | #define STM32_ST_IRQ_PRIORITY 8 | ||
184 | #define STM32_ST_USE_TIMER 2 | ||
185 | |||
186 | /* | ||
187 | * UART driver system settings. | ||
188 | */ | ||
189 | #define STM32_UART_USE_USART1 FALSE | ||
190 | #define STM32_UART_USE_USART2 FALSE | ||
191 | #define STM32_UART_USE_USART3 FALSE | ||
192 | #define STM32_UART_USART1_IRQ_PRIORITY 12 | ||
193 | #define STM32_UART_USART2_IRQ_PRIORITY 12 | ||
194 | #define STM32_UART_USART3_IRQ_PRIORITY 12 | ||
195 | #define STM32_UART_USART1_DMA_PRIORITY 0 | ||
196 | #define STM32_UART_USART2_DMA_PRIORITY 0 | ||
197 | #define STM32_UART_USART3_DMA_PRIORITY 0 | ||
198 | #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | ||
199 | |||
200 | /* | ||
201 | * WDG driver system settings. | ||
202 | */ | ||
203 | #define STM32_WDG_USE_IWDG FALSE | ||
204 | |||
205 | #endif /* MCUCONF_H */ | ||