1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
|
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_gpio.h"
#include "fsl_clock.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "MIMXRT1064-EVK"
/* The UART to use for debug messages. */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART1
#define BOARD_DEBUG_UART_INSTANCE 1U
#define BOARD_DEBUG_UART_CLK_FREQ BOARD_DebugConsoleSrcFreq()
#define BOARD_UART_IRQ LPUART1_IRQn
#define BOARD_UART_IRQ_HANDLER LPUART1_IRQHandler
#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE (115200U)
#endif /* BOARD_DEBUG_UART_BAUDRATE */
/*! @brief The USER_LED used for board */
#define LOGIC_LED_ON (0U)
#define LOGIC_LED_OFF (1U)
#ifndef BOARD_USER_LED_GPIO
#define BOARD_USER_LED_GPIO GPIO1
#endif
#ifndef BOARD_USER_LED_GPIO_PIN
#define BOARD_USER_LED_GPIO_PIN (9U)
#endif
#define USER_LED_INIT(output) \
GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, output); \
BOARD_USER_LED_GPIO->GDIR |= (1U << BOARD_USER_LED_GPIO_PIN) /*!< Enable target USER_LED */
#define USER_LED_ON() \
GPIO_PortClear(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!< Turn off target USER_LED */
#define USER_LED_OFF() GPIO_PortSet(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!<Turn on target USER_LED*/
#define USER_LED_TOGGLE() \
GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, \
0x1 ^ GPIO_PinRead(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN)) /*!< Toggle target USER_LED */
/*! @brief Define the port interrupt number for the board switches */
#ifndef BOARD_USER_BUTTON_GPIO
#define BOARD_USER_BUTTON_GPIO GPIO5
#endif
#ifndef BOARD_USER_BUTTON_GPIO_PIN
#define BOARD_USER_BUTTON_GPIO_PIN (0U)
#endif
#define BOARD_USER_BUTTON_IRQ GPIO5_Combined_0_15_IRQn
#define BOARD_USER_BUTTON_IRQ_HANDLER GPIO5_Combined_0_15_IRQHandler
#define BOARD_USER_BUTTON_NAME "SW8"
/*! @brief The board flash size */
#define BOARD_FLASH_SIZE (0x400000U)
/*! @brief The ENET PHY address. */
#define BOARD_ENET0_PHY_ADDRESS (0x02U) /* Phy address of enet port 0. */
/* USB PHY condfiguration */
#define BOARD_USB_PHY_D_CAL (0x0CU)
#define BOARD_USB_PHY_TXCAL45DP (0x06U)
#define BOARD_USB_PHY_TXCAL45DM (0x06U)
#define BOARD_ARDUINO_INT_IRQ (GPIO1_INT3_IRQn)
#define BOARD_ARDUINO_I2C_IRQ (LPI2C1_IRQn)
#define BOARD_ARDUINO_I2C_INDEX (1)
/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITGT202SHIELD_PWRON_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITGT202SHIELD_PWRON_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITGT202SHIELD_PWRON_GPIO_PIN 3U /*!< PIO4 pin index: 3 */
#define BOARD_INITGT202SHIELD_PWRON_PIN_NAME GPIO1_3 /*!< Pin name */
#define BOARD_INITGT202SHIELD_PWRON_LABEL "PWRON" /*!< Label */
#define BOARD_INITGT202SHIELD_PWRON_NAME "PWRON" /*!< Identifier name */
#define BOARD_INITGT202SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
#define BOARD_INITGT202SHIELD_IRQ_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITGT202SHIELD_IRQ_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITGT202SHIELD_IRQ_GPIO_PIN 19U /*!< PIO1 pin index: 19 */
#define BOARD_INITGT202SHIELD_IRQ_PIN_NAME GPIO1_19 /*!< Pin name */
#define BOARD_INITGT202SHIELD_IRQ_LABEL "IRQ" /*!< Label */
#define BOARD_INITGT202SHIELD_IRQ_NAME "IRQ" /*!< Identifier name */
#define BOARD_INITGT202SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO_PIN 9U /*!< PIO4 pin index: 9 */
#define BOARD_INITSILEX2401SHIELD_PWRON_PIN_NAME GPIO1_9 /*!< Pin name */
#define BOARD_INITSILEX2401SHIELD_PWRON_LABEL "PWRON" /*!< Label */
#define BOARD_INITSILEX2401SHIELD_PWRON_NAME "PWRON" /*!< Identifier name */
#define BOARD_INITSILEX2401SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITSILEX2401SHIELD_IRQ_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 11U /*!< PIO1 pin index: 11 */
#define BOARD_INITSILEX2401SHIELD_IRQ_PIN_NAME GPIO1_11 /*!< Pin name */
#define BOARD_INITSILEX2401SHIELD_IRQ_LABEL "IRQ" /*!< Label */
#define BOARD_INITSILEX2401SHIELD_IRQ_NAME "IRQ" /*!< Identifier name */
#define BOARD_INITSILEX2401SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
/* @Brief Board accelerator sensor configuration */
#define BOARD_ACCEL_I2C_BASEADDR LPI2C1
/* Select USB1 PLL (480 MHz) as LPI2C's clock source */
#define BOARD_ACCEL_I2C_CLOCK_SOURCE_SELECT (0U)
/* Clock divider for LPI2C clock source */
#define BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER (5U)
#define BOARD_ACCEL_I2C_CLOCK_FREQ (CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER + 1U))
#define BOARD_CODEC_I2C_BASEADDR LPI2C1
#define BOARD_CODEC_I2C_INSTANCE 1U
#define BOARD_CODEC_I2C_CLOCK_SOURCE_SELECT (0U)
#define BOARD_CODEC_I2C_CLOCK_SOURCE_DIVIDER (5U)
#define BOARD_CODEC_I2C_CLOCK_FREQ (10000000U)
/* @Brief Board CAMERA configuration */
#define BOARD_CAMERA_I2C_BASEADDR LPI2C1
#define BOARD_CAMERA_I2C_CLOCK_SOURCE_DIVIDER (5U)
#define BOARD_CAMERA_I2C_CLOCK_SOURCE_SELECT (0U) /* Select USB1 PLL (480 MHz) as LPI2C's clock source */
#define BOARD_CAMERA_I2C_CLOCK_FREQ \
(CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_CAMERA_I2C_CLOCK_SOURCE_DIVIDER + 1U))
#define BOARD_CAMERA_I2C_SCL_GPIO GPIO1
#define BOARD_CAMERA_I2C_SCL_PIN 16
#define BOARD_CAMERA_I2C_SDA_GPIO GPIO1
#define BOARD_CAMERA_I2C_SDA_PIN 17
#define BOARD_CAMERA_PWDN_GPIO GPIO1
#define BOARD_CAMERA_PWDN_PIN 4
/* @Brief Board Bluetooth HCI UART configuration */
#define BOARD_BT_UART_BASEADDR LPUART3
#define BOARD_BT_UART_CLK_FREQ BOARD_DebugConsoleSrcFreq()
#define BOARD_BT_UART_IRQ LPUART3_IRQn
#define BOARD_BT_UART_IRQ_HANDLER LPUART3_IRQHandler
/*! @brief board has sdcard */
#define BOARD_HAS_SDCARD (1U)
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*******************************************************************************
* API
******************************************************************************/
uint32_t BOARD_DebugConsoleSrcFreq(void);
void BOARD_InitDebugConsole(void);
void BOARD_ConfigMPU(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_LPI2C_Send(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize);
status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize);
status_t BOARD_LPI2C_SendSCCB(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize);
status_t BOARD_LPI2C_ReceiveSCCB(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Camera_I2C_Init(void);
status_t BOARD_Camera_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Camera_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
status_t BOARD_Camera_I2C_SendSCCB(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Camera_I2C_ReceiveSCCB(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */
void BOARD_SD_Pin_Config(uint32_t speed, uint32_t strength);
void BOARD_MMC_Pin_Config(uint32_t speed, uint32_t strength);
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* _BOARD_H_ */
|
