path: root/lib/chibios-contrib/ext/mcux-sdk/devices/LPC810/LPC810.h

/*
** ###################################################################
**     Processor:           LPC810M021FN8
**     Compilers:           GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**                          Keil ARM C/C++ Compiler
**                          MCUXpresso Compiler
**
**     Reference manual:    LPC81x User manual Rev.1.6  2 April 2014
**     Version:             rev. 1.2, 2017-06-08
**     Build:               b200513
**
**     Abstract:
**         CMSIS Peripheral Access Layer for LPC810
**
**     Copyright 1997-2016 Freescale Semiconductor, Inc.
**     Copyright 2016-2020 NXP
**     All rights reserved.
**
**     SPDX-License-Identifier: BSD-3-Clause
**
**     http:                 www.nxp.com
**     mail:                 [email protected]
**
**     Revisions:
**     - rev. 1.0 (2016-08-12)
**         Initial version.
**     - rev. 1.1 (2016-11-25)
**         Update CANFD and Classic CAN register.
**         Add MAC TIMERSTAMP registers.
**     - rev. 1.2 (2017-06-08)
**         Remove RTC_CTRL_RTC_OSC_BYPASS.
**         SYSCON_ARMTRCLKDIV rename to SYSCON_ARMTRACECLKDIV.
**         Remove RESET and HALT from SYSCON_AHBCLKDIV.
**
** ###################################################################
*/

/*!
 * @file LPC810.h
 * @version 1.2
 * @date 2017-06-08
 * @brief CMSIS Peripheral Access Layer for LPC810
 *
 * CMSIS Peripheral Access Layer for LPC810
 */

#ifndef _LPC810_H_
#define _LPC810_H_                               /**< Symbol preventing repeated inclusion */

/** Memory map major version (memory maps with equal major version number are
 * compatible) */
#define MCU_MEM_MAP_VERSION 0x0100U
/** Memory map minor version */
#define MCU_MEM_MAP_VERSION_MINOR 0x0002U


/* ----------------------------------------------------------------------------
   -- Interrupt vector numbers
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup Interrupt_vector_numbers Interrupt vector numbers
 * @{
 */

/** Interrupt Number Definitions */
#define NUMBER_OF_INT_VECTORS 48                 /**< Number of interrupts in the Vector table */

typedef enum IRQn {
  /* Auxiliary constants */
  NotAvail_IRQn                = -128,             /**< Not available device specific interrupt */

  /* Core interrupts */
  NonMaskableInt_IRQn          = -14,              /**< Non Maskable Interrupt */
  HardFault_IRQn               = -13,              /**< Cortex-M0 SV Hard Fault Interrupt */
  SVCall_IRQn                  = -5,               /**< Cortex-M0 SV Call Interrupt */
  PendSV_IRQn                  = -2,               /**< Cortex-M0 Pend SV Interrupt */
  SysTick_IRQn                 = -1,               /**< Cortex-M0 System Tick Interrupt */

  /* Device specific interrupts */
  SPI0_IRQn                    = 0,                /**< SPI0 interrupt */
  SPI1_IRQn                    = 1,                /**< SPI1 interrupt */
  Reserved18_IRQn              = 2,                /**< Reserved interrupt */
  USART0_IRQn                  = 3,                /**< USART0 interrupt */
  USART1_IRQn                  = 4,                /**< USART1 interrupt */
  USART2_IRQn                  = 5,                /**< USART2 interrupt */
  Reserved22_IRQn              = 6,                /**< Reserved interrupt */
  Reserved23_IRQn              = 7,                /**< Reserved interrupt */
  I2C0_IRQn                    = 8,                /**< I2C0 interrupt */
  SCT0_IRQn                    = 9,                /**< State configurable timer interrupt */
  MRT0_IRQn                    = 10,               /**< Multi-rate timer interrupt */
  CMP_IRQn                     = 11,               /**< Analog comparator interrupt or Capacitive Touch interrupt */
  WDT_IRQn                     = 12,               /**< Windowed watchdog timer interrupt */
  BOD_IRQn                     = 13,               /**< BOD interrupts */
  Reserved30_IRQn              = 14,               /**< Reserved interrupt */
  WKT_IRQn                     = 15,               /**< Self-wake-up timer interrupt */
  Reserved32_IRQn              = 16,               /**< Reserved interrupt */
  Reserved33_IRQn              = 17,               /**< Reserved interrupt */
  Reserved34_IRQn              = 18,               /**< Reserved interrupt */
  Reserved35_IRQn              = 19,               /**< Reserved interrupt */
  Reserved36_IRQn              = 20,               /**< Reserved interrupt */
  Reserved37_IRQn              = 21,               /**< Reserved interrupt */
  Reserved38_IRQn              = 22,               /**< Reserved interrupt */
  Reserved39_IRQn              = 23,               /**< Reserved interrupt */
  PIN_INT0_IRQn                = 24,               /**< Pin interrupt 0 or pattern match engine slice 0 interrupt */
  PIN_INT1_IRQn                = 25,               /**< Pin interrupt 1 or pattern match engine slice 1 interrupt */
  PIN_INT2_IRQn                = 26,               /**< Pin interrupt 2 or pattern match engine slice 2 interrupt */
  PIN_INT3_IRQn                = 27,               /**< Pin interrupt 3 or pattern match engine slice 3 interrupt */
  PIN_INT4_IRQn                = 28,               /**< Pin interrupt 4 or pattern match engine slice 4 interrupt */
  PIN_INT5_IRQn                = 29,               /**< Pin interrupt 5 or pattern match engine slice 5 interrupt */
  PIN_INT6_IRQn                = 30,               /**< Pin interrupt 6 or pattern match engine slice 6 interrupt */
  PIN_INT7_IRQn                = 31                /**< Pin interrupt 7 or pattern match engine slice 7 interrupt */
} IRQn_Type;

/*!
 * @}
 */ /* end of group Interrupt_vector_numbers */


/* ----------------------------------------------------------------------------
   -- Cortex M0 Core Configuration
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup Cortex_Core_Configuration Cortex M0 Core Configuration
 * @{
 */

#define __CM0PLUS_REV                  0x0000    /**< Core revision r0p0 */
#define __MPU_PRESENT                  0         /**< Defines if an MPU is present or not */
#define __VTOR_PRESENT                 1         /**< Defines if VTOR is present or not */
#define __NVIC_PRIO_BITS               2         /**< Number of priority bits implemented in the NVIC */
#define __Vendor_SysTickConfig         0         /**< Vendor specific implementation of SysTickConfig is defined */

#include "core_cm0plus.h"              /* Core Peripheral Access Layer */
#include "system_LPC810.h"             /* Device specific configuration file */

/*!
 * @}
 */ /* end of group Cortex_Core_Configuration */


/* ----------------------------------------------------------------------------
   -- Device Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup Peripheral_access_layer Device Peripheral Access Layer
 * @{
 */


/*
** Start of section using anonymous unions
*/

#if defined(__ARMCC_VERSION)
  #if (__ARMCC_VERSION >= 6010050)
    #pragma clang diagnostic push
  #else
    #pragma push
    #pragma anon_unions
  #endif
#elif defined(__GNUC__)
  /* anonymous unions are enabled by default */
#elif defined(__IAR_SYSTEMS_ICC__)
  #pragma language=extended
#else
  #error Not supported compiler type
#endif

/* ----------------------------------------------------------------------------
   -- ACOMP Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup ACOMP_Peripheral_Access_Layer ACOMP Peripheral Access Layer
 * @{
 */

/** ACOMP - Register Layout Typedef */
typedef struct {
  __IO uint32_t CTRL;                              /**< Comparator control register, offset: 0x0 */
  __IO uint32_t LAD;                               /**< Voltage ladder register, offset: 0x4 */
} ACOMP_Type;

/* ----------------------------------------------------------------------------
   -- ACOMP Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup ACOMP_Register_Masks ACOMP Register Masks
 * @{
 */

/*! @name CTRL - Comparator control register */
/*! @{ */
#define ACOMP_CTRL_EDGESEL_MASK                  (0x18U)
#define ACOMP_CTRL_EDGESEL_SHIFT                 (3U)
/*! EDGESEL - This field controls which edges on the comparator output set the COMPEDGE bit (bit 23 below):
 *  0b00..Falling edges
 *  0b01..Rising edges
 *  0b10..Both edges
 *  0b11..Both edges
 */
#define ACOMP_CTRL_EDGESEL(x)                    (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_EDGESEL_SHIFT)) & ACOMP_CTRL_EDGESEL_MASK)
#define ACOMP_CTRL_COMPSA_MASK                   (0x40U)
#define ACOMP_CTRL_COMPSA_SHIFT                  (6U)
/*! COMPSA - Comparator output control
 *  0b0..Comparator output is used directly.
 *  0b1..Comparator output is synchronized to the bus clock for output to other modules.
 */
#define ACOMP_CTRL_COMPSA(x)                     (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_COMPSA_SHIFT)) & ACOMP_CTRL_COMPSA_MASK)
#define ACOMP_CTRL_COMP_VP_SEL_MASK              (0x700U)
#define ACOMP_CTRL_COMP_VP_SEL_SHIFT             (8U)
/*! COMP_VP_SEL - Selects positive voltage input
 *  0b000..VOLTAGE_LADDER_OUTPUT
 *  0b001..ACMP_I1
 *  0b010..ACMP_I2
 *  0b011..ACMP_I3
 *  0b100..ACMP_I4
 *  0b101..ACMP_I5
 *  0b110..Band gap. Internal reference voltage.
 *  0b111..DAC0 output
 */
#define ACOMP_CTRL_COMP_VP_SEL(x)                (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_COMP_VP_SEL_SHIFT)) & ACOMP_CTRL_COMP_VP_SEL_MASK)
#define ACOMP_CTRL_COMP_VM_SEL_MASK              (0x3800U)
#define ACOMP_CTRL_COMP_VM_SEL_SHIFT             (11U)
/*! COMP_VM_SEL - Selects negative voltage input
 *  0b000..VOLTAGE_LADDER_OUTPUT
 *  0b001..ACMP_I1
 *  0b010..ACMP_I2
 *  0b011..ACMP_I3
 *  0b100..ACMP_I4
 *  0b101..ACMP_I5
 *  0b110..Band gap. Internal reference voltage.
 *  0b111..DAC0 output
 */
#define ACOMP_CTRL_COMP_VM_SEL(x)                (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_COMP_VM_SEL_SHIFT)) & ACOMP_CTRL_COMP_VM_SEL_MASK)
#define ACOMP_CTRL_EDGECLR_MASK                  (0x100000U)
#define ACOMP_CTRL_EDGECLR_SHIFT                 (20U)
/*! EDGECLR - Interrupt clear bit. To clear the COMPEDGE bit and thus negate the interrupt request,
 *    toggle the EDGECLR bit by first writing a 1 and then a 0.
 */
#define ACOMP_CTRL_EDGECLR(x)                    (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_EDGECLR_SHIFT)) & ACOMP_CTRL_EDGECLR_MASK)
#define ACOMP_CTRL_COMPSTAT_MASK                 (0x200000U)
#define ACOMP_CTRL_COMPSTAT_SHIFT                (21U)
/*! COMPSTAT - Comparator status. This bit reflects the state of the comparator output.
 */
#define ACOMP_CTRL_COMPSTAT(x)                   (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_COMPSTAT_SHIFT)) & ACOMP_CTRL_COMPSTAT_MASK)
#define ACOMP_CTRL_COMPEDGE_MASK                 (0x800000U)
#define ACOMP_CTRL_COMPEDGE_SHIFT                (23U)
/*! COMPEDGE - Comparator edge-detect status.
 */
#define ACOMP_CTRL_COMPEDGE(x)                   (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_COMPEDGE_SHIFT)) & ACOMP_CTRL_COMPEDGE_MASK)
#define ACOMP_CTRL_HYS_MASK                      (0x6000000U)
#define ACOMP_CTRL_HYS_SHIFT                     (25U)
/*! HYS - Controls the hysteresis of the comparator. When the comparator is outputting a certain
 *    state, this is the difference between the selected signals, in the opposite direction from the
 *    state being output, that will switch the output.
 *  0b00..None (the output will switch as the voltages cross)
 *  0b01..5 mv
 *  0b10..10 mv
 *  0b11..20 mv
 */
#define ACOMP_CTRL_HYS(x)                        (((uint32_t)(((uint32_t)(x)) << ACOMP_CTRL_HYS_SHIFT)) & ACOMP_CTRL_HYS_MASK)
/*! @} */

/*! @name LAD - Voltage ladder register */
/*! @{ */
#define ACOMP_LAD_LADEN_MASK                     (0x1U)
#define ACOMP_LAD_LADEN_SHIFT                    (0U)
/*! LADEN - Voltage ladder enable
 */
#define ACOMP_LAD_LADEN(x)                       (((uint32_t)(((uint32_t)(x)) << ACOMP_LAD_LADEN_SHIFT)) & ACOMP_LAD_LADEN_MASK)
#define ACOMP_LAD_LADSEL_MASK                    (0x3EU)
#define ACOMP_LAD_LADSEL_SHIFT                   (1U)
/*! LADSEL - Voltage ladder value. The reference voltage Vref depends on the LADREF bit below. 00000
 *    = VSS 00001 = 1 x Vref/31 00010 = 2 x Vref/31 ... 11111 = Vref
 */
#define ACOMP_LAD_LADSEL(x)                      (((uint32_t)(((uint32_t)(x)) << ACOMP_LAD_LADSEL_SHIFT)) & ACOMP_LAD_LADSEL_MASK)
#define ACOMP_LAD_LADREF_MASK                    (0x40U)
#define ACOMP_LAD_LADREF_SHIFT                   (6U)
/*! LADREF - Selects the reference voltage Vref for the voltage ladder.
 *  0b0..Supply pin VDD
 *  0b1..VDDCMP pin
 */
#define ACOMP_LAD_LADREF(x)                      (((uint32_t)(((uint32_t)(x)) << ACOMP_LAD_LADREF_SHIFT)) & ACOMP_LAD_LADREF_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group ACOMP_Register_Masks */


/* ACOMP - Peripheral instance base addresses */
/** Peripheral ACOMP base address */
#define ACOMP_BASE                               (0x40024000u)
/** Peripheral ACOMP base pointer */
#define ACOMP                                    ((ACOMP_Type *)ACOMP_BASE)
/** Array initializer of ACOMP peripheral base addresses */
#define ACOMP_BASE_ADDRS                         { ACOMP_BASE }
/** Array initializer of ACOMP peripheral base pointers */
#define ACOMP_BASE_PTRS                          { ACOMP }

/*!
 * @}
 */ /* end of group ACOMP_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- CRC Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup CRC_Peripheral_Access_Layer CRC Peripheral Access Layer
 * @{
 */

/** CRC - Register Layout Typedef */
typedef struct {
  __IO uint32_t MODE;                              /**< CRC mode register, offset: 0x0 */
  __IO uint32_t SEED;                              /**< CRC seed register, offset: 0x4 */
  union {                                          /* offset: 0x8 */
    __I  uint32_t SUM;                               /**< CRC checksum register, offset: 0x8 */
    __O  uint32_t WR_DATA;                           /**< CRC data register, offset: 0x8 */
  };
} CRC_Type;

/* ----------------------------------------------------------------------------
   -- CRC Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup CRC_Register_Masks CRC Register Masks
 * @{
 */

/*! @name MODE - CRC mode register */
/*! @{ */
#define CRC_MODE_CRC_POLY_MASK                   (0x3U)
#define CRC_MODE_CRC_POLY_SHIFT                  (0U)
/*! CRC_POLY - CRC polynomial: 1X = CRC-32 polynomial 01 = CRC-16 polynomial 00 = CRC-CCITT polynomial
 */
#define CRC_MODE_CRC_POLY(x)                     (((uint32_t)(((uint32_t)(x)) << CRC_MODE_CRC_POLY_SHIFT)) & CRC_MODE_CRC_POLY_MASK)
#define CRC_MODE_BIT_RVS_WR_MASK                 (0x4U)
#define CRC_MODE_BIT_RVS_WR_SHIFT                (2U)
/*! BIT_RVS_WR - Data bit order: 1 = Bit order reverse for CRC_WR_DATA (per byte) 0 = No bit order reverse for CRC_WR_DATA (per byte)
 */
#define CRC_MODE_BIT_RVS_WR(x)                   (((uint32_t)(((uint32_t)(x)) << CRC_MODE_BIT_RVS_WR_SHIFT)) & CRC_MODE_BIT_RVS_WR_MASK)
#define CRC_MODE_CMPL_WR_MASK                    (0x8U)
#define CRC_MODE_CMPL_WR_SHIFT                   (3U)
/*! CMPL_WR - Data complement: 1 = 1's complement for CRC_WR_DATA 0 = No 1's complement for CRC_WR_DATA
 */
#define CRC_MODE_CMPL_WR(x)                      (((uint32_t)(((uint32_t)(x)) << CRC_MODE_CMPL_WR_SHIFT)) & CRC_MODE_CMPL_WR_MASK)
#define CRC_MODE_BIT_RVS_SUM_MASK                (0x10U)
#define CRC_MODE_BIT_RVS_SUM_SHIFT               (4U)
/*! BIT_RVS_SUM - CRC sum bit order: 1 = Bit order reverse for CRC_SUM 0 = No bit order reverse for CRC_SUM
 */
#define CRC_MODE_BIT_RVS_SUM(x)                  (((uint32_t)(((uint32_t)(x)) << CRC_MODE_BIT_RVS_SUM_SHIFT)) & CRC_MODE_BIT_RVS_SUM_MASK)
#define CRC_MODE_CMPL_SUM_MASK                   (0x20U)
#define CRC_MODE_CMPL_SUM_SHIFT                  (5U)
/*! CMPL_SUM - CRC sum complement: 1 = 1's complement for CRC_SUM 0 = No 1's complement for CRC_SUM
 */
#define CRC_MODE_CMPL_SUM(x)                     (((uint32_t)(((uint32_t)(x)) << CRC_MODE_CMPL_SUM_SHIFT)) & CRC_MODE_CMPL_SUM_MASK)
/*! @} */

/*! @name SEED - CRC seed register */
/*! @{ */
#define CRC_SEED_CRC_SEED_MASK                   (0xFFFFFFFFU)
#define CRC_SEED_CRC_SEED_SHIFT                  (0U)
/*! CRC_SEED - A write access to this register will load CRC seed value to CRC_SUM register with
 *    selected bit order and 1's complement pre-processes. A write access to this register will
 *    overrule the CRC calculation in progresses.
 */
#define CRC_SEED_CRC_SEED(x)                     (((uint32_t)(((uint32_t)(x)) << CRC_SEED_CRC_SEED_SHIFT)) & CRC_SEED_CRC_SEED_MASK)
/*! @} */

/*! @name SUM - CRC checksum register */
/*! @{ */
#define CRC_SUM_CRC_SUM_MASK                     (0xFFFFFFFFU)
#define CRC_SUM_CRC_SUM_SHIFT                    (0U)
/*! CRC_SUM - The most recent CRC sum can be read through this register with selected bit order and 1's complement post-processes.
 */
#define CRC_SUM_CRC_SUM(x)                       (((uint32_t)(((uint32_t)(x)) << CRC_SUM_CRC_SUM_SHIFT)) & CRC_SUM_CRC_SUM_MASK)
/*! @} */

/*! @name WR_DATA - CRC data register */
/*! @{ */
#define CRC_WR_DATA_CRC_WR_DATA_MASK             (0xFFFFFFFFU)
#define CRC_WR_DATA_CRC_WR_DATA_SHIFT            (0U)
/*! CRC_WR_DATA - Data written to this register will be taken to perform CRC calculation with
 *    selected bit order and 1's complement pre-process. Any write size 8, 16 or 32-bit are allowed and
 *    accept back-to-back transactions.
 */
#define CRC_WR_DATA_CRC_WR_DATA(x)               (((uint32_t)(((uint32_t)(x)) << CRC_WR_DATA_CRC_WR_DATA_SHIFT)) & CRC_WR_DATA_CRC_WR_DATA_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group CRC_Register_Masks */


/* CRC - Peripheral instance base addresses */
/** Peripheral CRC base address */
#define CRC_BASE                                 (0x50000000u)
/** Peripheral CRC base pointer */
#define CRC                                      ((CRC_Type *)CRC_BASE)
/** Array initializer of CRC peripheral base addresses */
#define CRC_BASE_ADDRS                           { CRC_BASE }
/** Array initializer of CRC peripheral base pointers */
#define CRC_BASE_PTRS                            { CRC }

/*!
 * @}
 */ /* end of group CRC_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- FLASH_CTRL Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup FLASH_CTRL_Peripheral_Access_Layer FLASH_CTRL Peripheral Access Layer
 * @{
 */

/** FLASH_CTRL - Register Layout Typedef */
typedef struct {
       uint8_t RESERVED_0[16];
  __IO uint32_t FLASHCFG;                          /**< Flash configuration register, offset: 0x10 */
       uint8_t RESERVED_1[12];
  __IO uint32_t FMSSTART;                          /**< Flash signature start address register, offset: 0x20 */
  __IO uint32_t FMSSTOP;                           /**< Flash signaure stop address register, offset: 0x24 */
       uint8_t RESERVED_2[4];
  __I  uint32_t FMSW0;                             /**< Flash signature generation result register returns the flash signature produced by the embedded signature generator.., offset: 0x2C */
} FLASH_CTRL_Type;

/* ----------------------------------------------------------------------------
   -- FLASH_CTRL Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup FLASH_CTRL_Register_Masks FLASH_CTRL Register Masks
 * @{
 */

/*! @name FLASHCFG - Flash configuration register */
/*! @{ */
#define FLASH_CTRL_FLASHCFG_FLASHTIM_MASK        (0x3U)
#define FLASH_CTRL_FLASHCFG_FLASHTIM_SHIFT       (0U)
/*! FLASHTIM - Flash memory access time. FLASHTIM +1 is equal to the number of system clocks used for flash access.
 *  0b00..1 system clock flash access time.
 *  0b01..2 system clock flash access time.
 *  0b10..3 system clock flash access time.
 *  0b11..Reserved.
 */
#define FLASH_CTRL_FLASHCFG_FLASHTIM(x)          (((uint32_t)(((uint32_t)(x)) << FLASH_CTRL_FLASHCFG_FLASHTIM_SHIFT)) & FLASH_CTRL_FLASHCFG_FLASHTIM_MASK)
/*! @} */

/*! @name FMSSTART - Flash signature start address register */
/*! @{ */
#define FLASH_CTRL_FMSSTART_START_MASK           (0x1FFFFU)
#define FLASH_CTRL_FMSSTART_START_SHIFT          (0U)
/*! START - Signature generation start address (corresponds to AHB byte address bits[18:2]).
 */
#define FLASH_CTRL_FMSSTART_START(x)             (((uint32_t)(((uint32_t)(x)) << FLASH_CTRL_FMSSTART_START_SHIFT)) & FLASH_CTRL_FMSSTART_START_MASK)
/*! @} */

/*! @name FMSSTOP - Flash signaure stop address register */
/*! @{ */
#define FLASH_CTRL_FMSSTOP_STOPA_MASK            (0x1FFFFU)
#define FLASH_CTRL_FMSSTOP_STOPA_SHIFT           (0U)
/*! STOPA - Stop address for signature generation (the word specified by STOP is included in the
 *    address range). The address is in units of memory words, not bytes.
 */
#define FLASH_CTRL_FMSSTOP_STOPA(x)              (((uint32_t)(((uint32_t)(x)) << FLASH_CTRL_FMSSTOP_STOPA_SHIFT)) & FLASH_CTRL_FMSSTOP_STOPA_MASK)
#define FLASH_CTRL_FMSSTOP_STRTBIST_MASK         (0x80000000U)
#define FLASH_CTRL_FMSSTOP_STRTBIST_SHIFT        (31U)
/*! STRTBIST - When this bit is written to 1, signature generation starts. At the end of signature
 *    generation, this bit is automatically cleared.
 */
#define FLASH_CTRL_FMSSTOP_STRTBIST(x)           (((uint32_t)(((uint32_t)(x)) << FLASH_CTRL_FMSSTOP_STRTBIST_SHIFT)) & FLASH_CTRL_FMSSTOP_STRTBIST_MASK)
/*! @} */

/*! @name FMSW0 - Flash signature generation result register returns the flash signature produced by the embedded signature generator.. */
/*! @{ */
#define FLASH_CTRL_FMSW0_SIG_MASK                (0xFFFFFFFFU)
#define FLASH_CTRL_FMSW0_SIG_SHIFT               (0U)
/*! SIG - 32-bit signature.
 */
#define FLASH_CTRL_FMSW0_SIG(x)                  (((uint32_t)(((uint32_t)(x)) << FLASH_CTRL_FMSW0_SIG_SHIFT)) & FLASH_CTRL_FMSW0_SIG_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group FLASH_CTRL_Register_Masks */


/* FLASH_CTRL - Peripheral instance base addresses */
/** Peripheral FLASH_CTRL base address */
#define FLASH_CTRL_BASE                          (0x40040000u)
/** Peripheral FLASH_CTRL base pointer */
#define FLASH_CTRL                               ((FLASH_CTRL_Type *)FLASH_CTRL_BASE)
/** Array initializer of FLASH_CTRL peripheral base addresses */
#define FLASH_CTRL_BASE_ADDRS                    { FLASH_CTRL_BASE }
/** Array initializer of FLASH_CTRL peripheral base pointers */
#define FLASH_CTRL_BASE_PTRS                     { FLASH_CTRL }

/*!
 * @}
 */ /* end of group FLASH_CTRL_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- GPIO Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup GPIO_Peripheral_Access_Layer GPIO Peripheral Access Layer
 * @{
 */

/** GPIO - Register Layout Typedef */
typedef struct {
  __IO uint8_t B[1][18];                           /**< Byte pin registers for all port 0 and 1 GPIO pins, array offset: 0x0, array step: index*0x12, index2*0x1 */
       uint8_t RESERVED_0[4078];
  __IO uint32_t W[1][18];                          /**< Word pin registers for all port 0 and 1 GPIO pins, array offset: 0x1000, array step: index*0x48, index2*0x4 */
       uint8_t RESERVED_1[4024];
  __IO uint32_t DIR[1];                            /**< Direction registers, array offset: 0x2000, array step: 0x4 */
       uint8_t RESERVED_2[124];
  __IO uint32_t MASK[1];                           /**< Mask register, array offset: 0x2080, array step: 0x4 */
       uint8_t RESERVED_3[124];
  __IO uint32_t PIN[1];                            /**< Port pin register, array offset: 0x2100, array step: 0x4 */
       uint8_t RESERVED_4[124];
  __IO uint32_t MPIN[1];                           /**< Masked port register, array offset: 0x2180, array step: 0x4 */
       uint8_t RESERVED_5[124];
  __IO uint32_t SET[1];                            /**< Write: Set register for port Read: output bits for port, array offset: 0x2200, array step: 0x4 */
       uint8_t RESERVED_6[124];
  __O  uint32_t CLR[1];                            /**< Clear port, array offset: 0x2280, array step: 0x4 */
       uint8_t RESERVED_7[124];
  __O  uint32_t NOT[1];                            /**< Toggle port, array offset: 0x2300, array step: 0x4 */
} GPIO_Type;

/* ----------------------------------------------------------------------------
   -- GPIO Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup GPIO_Register_Masks GPIO Register Masks
 * @{
 */

/*! @name B - Byte pin registers for all port 0 and 1 GPIO pins */
/*! @{ */
#define GPIO_B_PBYTE_MASK                        (0x1U)
#define GPIO_B_PBYTE_SHIFT                       (0U)
/*! PBYTE - Read: state of the pin PIOm_n, regardless of direction, masking, or alternate function,
 *    except that pins configured as analog I/O always read as 0. One register for each port pin.
 *    Supported pins depends on the specific device and package. Write: loads the pin's output bit.
 *    One register for each port pin. Supported pins depends on the specific device and package.
 */
#define GPIO_B_PBYTE(x)                          (((uint8_t)(((uint8_t)(x)) << GPIO_B_PBYTE_SHIFT)) & GPIO_B_PBYTE_MASK)
/*! @} */

/* The count of GPIO_B */
#define GPIO_B_COUNT                             (1U)

/* The count of GPIO_B */
#define GPIO_B_COUNT2                            (18U)

/*! @name W - Word pin registers for all port 0 and 1 GPIO pins */
/*! @{ */
#define GPIO_W_PWORD_MASK                        (0xFFFFFFFFU)
#define GPIO_W_PWORD_SHIFT                       (0U)
/*! PWORD - Read 0: pin PIOm_n is LOW. Write 0: clear output bit. Read 0xFFFF FFFF: pin PIOm_n is
 *    HIGH. Write any value 0x0000 0001 to 0xFFFF FFFF: set output bit. Only 0 or 0xFFFF FFFF can be
 *    read. Writing any value other than 0 will set the output bit. One register for each port pin.
 *    Supported pins depends on the specific device and package.
 */
#define GPIO_W_PWORD(x)                          (((uint32_t)(((uint32_t)(x)) << GPIO_W_PWORD_SHIFT)) & GPIO_W_PWORD_MASK)
/*! @} */

/* The count of GPIO_W */
#define GPIO_W_COUNT                             (1U)

/* The count of GPIO_W */
#define GPIO_W_COUNT2                            (18U)

/*! @name DIR - Direction registers */
/*! @{ */
#define GPIO_DIR_DIRP_MASK                       (0x3FFFFU)
#define GPIO_DIR_DIRP_SHIFT                      (0U)
/*! DIRP - Selects pin direction for pin PIOm_n (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported
 *    pins depends on the specific device and package. 0 = input. 1 = output.
 */
#define GPIO_DIR_DIRP(x)                         (((uint32_t)(((uint32_t)(x)) << GPIO_DIR_DIRP_SHIFT)) & GPIO_DIR_DIRP_MASK)
/*! @} */

/* The count of GPIO_DIR */
#define GPIO_DIR_COUNT                           (1U)

/*! @name MASK - Mask register */
/*! @{ */
#define GPIO_MASK_MASKP_MASK                     (0x3FFFFU)
#define GPIO_MASK_MASKP_SHIFT                    (0U)
/*! MASKP - Controls which bits corresponding to PIOm_n are active in the MPORT register (bit 0 =
 *    PIOn_0, bit 1 = PIOn_1, etc.). Supported pins depends on the specific device and package. 0 =
 *    Read MPORT: pin state; write MPORT: load output bit. 1 = Read MPORT: 0; write MPORT: output bit
 *    not affected.
 */
#define GPIO_MASK_MASKP(x)                       (((uint32_t)(((uint32_t)(x)) << GPIO_MASK_MASKP_SHIFT)) & GPIO_MASK_MASKP_MASK)
/*! @} */

/* The count of GPIO_MASK */
#define GPIO_MASK_COUNT                          (1U)

/*! @name PIN - Port pin register */
/*! @{ */
#define GPIO_PIN_PORT_MASK                       (0x3FFFFU)
#define GPIO_PIN_PORT_SHIFT                      (0U)
/*! PORT - Reads pin states or loads output bits (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported
 *    pins depends on the specific device and package. 0 = Read: pin is low; write: clear output bit.
 *    1 = Read: pin is high; write: set output bit.
 */
#define GPIO_PIN_PORT(x)                         (((uint32_t)(((uint32_t)(x)) << GPIO_PIN_PORT_SHIFT)) & GPIO_PIN_PORT_MASK)
/*! @} */

/* The count of GPIO_PIN */
#define GPIO_PIN_COUNT                           (1U)

/*! @name MPIN - Masked port register */
/*! @{ */
#define GPIO_MPIN_MPORTP_MASK                    (0x3FFFFU)
#define GPIO_MPIN_MPORTP_SHIFT                   (0U)
/*! MPORTP - Masked port register (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported pins depends on
 *    the specific device and package. 0 = Read: pin is LOW and/or the corresponding bit in the MASK
 *    register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1
 *    = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit
 *    if the corresponding bit in the MASK register is 0.
 */
#define GPIO_MPIN_MPORTP(x)                      (((uint32_t)(((uint32_t)(x)) << GPIO_MPIN_MPORTP_SHIFT)) & GPIO_MPIN_MPORTP_MASK)
/*! @} */

/* The count of GPIO_MPIN */
#define GPIO_MPIN_COUNT                          (1U)

/*! @name SET - Write: Set register for port Read: output bits for port */
/*! @{ */
#define GPIO_SET_SETP_MASK                       (0x3FFFFU)
#define GPIO_SET_SETP_SHIFT                      (0U)
/*! SETP - Read or set output bits (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported pins depends on
 *    the specific device and package. 0 = Read: output bit: write: no operation. 1 = Read: output
 *    bit; write: set output bit.
 */
#define GPIO_SET_SETP(x)                         (((uint32_t)(((uint32_t)(x)) << GPIO_SET_SETP_SHIFT)) & GPIO_SET_SETP_MASK)
/*! @} */

/* The count of GPIO_SET */
#define GPIO_SET_COUNT                           (1U)

/*! @name CLR - Clear port */
/*! @{ */
#define GPIO_CLR_CLRP_MASK                       (0x3FFFFU)
#define GPIO_CLR_CLRP_SHIFT                      (0U)
/*! CLRP - Clear output bits (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported pins depends on the
 *    specific device and package. 0 = No operation. 1 = Clear output bit.
 */
#define GPIO_CLR_CLRP(x)                         (((uint32_t)(((uint32_t)(x)) << GPIO_CLR_CLRP_SHIFT)) & GPIO_CLR_CLRP_MASK)
/*! @} */

/* The count of GPIO_CLR */
#define GPIO_CLR_COUNT                           (1U)

/*! @name NOT - Toggle port */
/*! @{ */
#define GPIO_NOT_NOTP_MASK                       (0x3FFFFU)
#define GPIO_NOT_NOTP_SHIFT                      (0U)
/*! NOTP - Toggle output bits (bit 0 = PIOn_0, bit 1 = PIOn_1, etc.). Supported pins depends on the
 *    specific device and package. 0 = no operation. 1 = Toggle output bit.
 */
#define GPIO_NOT_NOTP(x)                         (((uint32_t)(((uint32_t)(x)) << GPIO_NOT_NOTP_SHIFT)) & GPIO_NOT_NOTP_MASK)
/*! @} */

/* The count of GPIO_NOT */
#define GPIO_NOT_COUNT                           (1U)


/*!
 * @}
 */ /* end of group GPIO_Register_Masks */


/* GPIO - Peripheral instance base addresses */
/** Peripheral GPIO base address */
#define GPIO_BASE                                (0xA0000000u)
/** Peripheral GPIO base pointer */
#define GPIO                                     ((GPIO_Type *)GPIO_BASE)
/** Array initializer of GPIO peripheral base addresses */
#define GPIO_BASE_ADDRS                          { GPIO_BASE }
/** Array initializer of GPIO peripheral base pointers */
#define GPIO_BASE_PTRS                           { GPIO }

/*!
 * @}
 */ /* end of group GPIO_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- I2C Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup I2C_Peripheral_Access_Layer I2C Peripheral Access Layer
 * @{
 */

/** I2C - Register Layout Typedef */
typedef struct {
  __IO uint32_t CFG;                               /**< Configuration for shared functions., offset: 0x0 */
  __IO uint32_t STAT;                              /**< Status register for Master, Slave, and Monitor functions., offset: 0x4 */
  __IO uint32_t INTENSET;                          /**< Interrupt Enable Set and read register., offset: 0x8 */
  __O  uint32_t INTENCLR;                          /**< Interrupt Enable Clear register., offset: 0xC */
  __IO uint32_t TIMEOUT;                           /**< Time-out value register., offset: 0x10 */
  __IO uint32_t CLKDIV;                            /**< Clock pre-divider for the entire I2C interface. This determines what time increments are used for the MSTTIME register, and controls some timing of the Slave function., offset: 0x14 */
  __I  uint32_t INTSTAT;                           /**< Interrupt Status register for Master, Slave, and Monitor functions., offset: 0x18 */
       uint8_t RESERVED_0[4];
  __IO uint32_t MSTCTL;                            /**< Master control register., offset: 0x20 */
  __IO uint32_t MSTTIME;                           /**< Master timing configuration., offset: 0x24 */
  __IO uint32_t MSTDAT;                            /**< Combined Master receiver and transmitter data register., offset: 0x28 */
       uint8_t RESERVED_1[20];
  __IO uint32_t SLVCTL;                            /**< Slave control register., offset: 0x40 */
  __IO uint32_t SLVDAT;                            /**< Combined Slave receiver and transmitter data register., offset: 0x44 */
  __IO uint32_t SLVADR[4];                         /**< Slave address register., array offset: 0x48, array step: 0x4 */
  __IO uint32_t SLVQUAL0;                          /**< Slave Qualification for address 0., offset: 0x58 */
       uint8_t RESERVED_2[36];
  __I  uint32_t MONRXDAT;                          /**< Monitor receiver data register., offset: 0x80 */
} I2C_Type;

/* ----------------------------------------------------------------------------
   -- I2C Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup I2C_Register_Masks I2C Register Masks
 * @{
 */

/*! @name CFG - Configuration for shared functions. */
/*! @{ */
#define I2C_CFG_MSTEN_MASK                       (0x1U)
#define I2C_CFG_MSTEN_SHIFT                      (0U)
/*! MSTEN - Master Enable. When disabled, configurations settings for the Master function are not
 *    changed, but the Master function is internally reset.
 *  0b0..Disabled. The I2C Master function is disabled.
 *  0b1..Enabled. The I2C Master function is enabled.
 */
#define I2C_CFG_MSTEN(x)                         (((uint32_t)(((uint32_t)(x)) << I2C_CFG_MSTEN_SHIFT)) & I2C_CFG_MSTEN_MASK)
#define I2C_CFG_SLVEN_MASK                       (0x2U)
#define I2C_CFG_SLVEN_SHIFT                      (1U)
/*! SLVEN - Slave Enable. When disabled, configurations settings for the Slave function are not
 *    changed, but the Slave function is internally reset.
 *  0b0..Disabled. The I2C slave function is disabled.
 *  0b1..Enabled. The I2C slave function is enabled.
 */
#define I2C_CFG_SLVEN(x)                         (((uint32_t)(((uint32_t)(x)) << I2C_CFG_SLVEN_SHIFT)) & I2C_CFG_SLVEN_MASK)
#define I2C_CFG_MONEN_MASK                       (0x4U)
#define I2C_CFG_MONEN_SHIFT                      (2U)
/*! MONEN - Monitor Enable. When disabled, configurations settings for the Monitor function are not
 *    changed, but the Monitor function is internally reset.
 *  0b0..Disabled. The I2C Monitor function is disabled.
 *  0b1..Enabled. The I2C Monitor function is enabled.
 */
#define I2C_CFG_MONEN(x)                         (((uint32_t)(((uint32_t)(x)) << I2C_CFG_MONEN_SHIFT)) & I2C_CFG_MONEN_MASK)
#define I2C_CFG_TIMEOUTEN_MASK                   (0x8U)
#define I2C_CFG_TIMEOUTEN_SHIFT                  (3U)
/*! TIMEOUTEN - I2C bus Time-out Enable. When disabled, the time-out function is internally reset.
 *  0b0..Disabled. Time-out function is disabled.
 *  0b1..Enabled. Time-out function is enabled. Both types of time-out flags will be generated and will cause
 *       interrupts if they are enabled. Typically, only one time-out will be used in a system.
 */
#define I2C_CFG_TIMEOUTEN(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_CFG_TIMEOUTEN_SHIFT)) & I2C_CFG_TIMEOUTEN_MASK)
#define I2C_CFG_MONCLKSTR_MASK                   (0x10U)
#define I2C_CFG_MONCLKSTR_SHIFT                  (4U)
/*! MONCLKSTR - Monitor function Clock Stretching.
 *  0b0..Disabled. The Monitor function will not perform clock stretching. Software or DMA may not always be able
 *       to read data provided by the Monitor function before it is overwritten. This mode may be used when
 *       non-invasive monitoring is critical.
 *  0b1..Enabled. The Monitor function will perform clock stretching in order to ensure that software or DMA can
 *       read all incoming data supplied by the Monitor function.
 */
#define I2C_CFG_MONCLKSTR(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_CFG_MONCLKSTR_SHIFT)) & I2C_CFG_MONCLKSTR_MASK)
/*! @} */

/*! @name STAT - Status register for Master, Slave, and Monitor functions. */
/*! @{ */
#define I2C_STAT_MSTPENDING_MASK                 (0x1U)
#define I2C_STAT_MSTPENDING_SHIFT                (0U)
/*! MSTPENDING - Master Pending. Indicates that the Master is waiting to continue communication on
 *    the I2C-bus (pending) or is idle. When the master is pending, the MSTSTATE bits indicate what
 *    type of software service if any the master expects. This flag will cause an interrupt when set
 *    if, enabled via the INTENSET register. The MSTPENDING flag is not set when the DMA is handling
 *    an event (if the MSTDMA bit in the MSTCTL register is set). If the master is in the idle
 *    state, and no communication is needed, mask this interrupt.
 *  0b0..In progress. Communication is in progress and the Master function is busy and cannot currently accept a command.
 *  0b1..Pending. The Master function needs software service or is in the idle state. If the master is not in the
 *       idle state, it is waiting to receive or transmit data or the NACK bit.
 */
#define I2C_STAT_MSTPENDING(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MSTPENDING_SHIFT)) & I2C_STAT_MSTPENDING_MASK)
#define I2C_STAT_MSTSTATE_MASK                   (0xEU)
#define I2C_STAT_MSTSTATE_SHIFT                  (1U)
/*! MSTSTATE - Master State code. The master state code reflects the master state when the
 *    MSTPENDING bit is set, that is the master is pending or in the idle state. Each value of this field
 *    indicates a specific required service for the Master function. All other values are reserved. See
 *    Table 400 for details of state values and appropriate responses.
 *  0b000..Idle. The Master function is available to be used for a new transaction.
 *  0b001..Receive ready. Received data available (Master Receiver mode). Address plus Read was previously sent and Acknowledged by slave.
 *  0b010..Transmit ready. Data can be transmitted (Master Transmitter mode). Address plus Write was previously sent and Acknowledged by slave.
 *  0b011..NACK Address. Slave NACKed address.
 *  0b100..NACK Data. Slave NACKed transmitted data.
 */
#define I2C_STAT_MSTSTATE(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MSTSTATE_SHIFT)) & I2C_STAT_MSTSTATE_MASK)
#define I2C_STAT_MSTARBLOSS_MASK                 (0x10U)
#define I2C_STAT_MSTARBLOSS_SHIFT                (4U)
/*! MSTARBLOSS - Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to
 *    this bit. It is also cleared automatically a 1 is written to MSTCONTINUE.
 *  0b0..No Arbitration Loss has occurred.
 *  0b1..Arbitration loss. The Master function has experienced an Arbitration Loss. At this point, the Master
 *       function has already stopped driving the bus and gone to an idle state. Software can respond by doing nothing,
 *       or by sending a Start in order to attempt to gain control of the bus when it next becomes idle.
 */
#define I2C_STAT_MSTARBLOSS(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MSTARBLOSS_SHIFT)) & I2C_STAT_MSTARBLOSS_MASK)
#define I2C_STAT_MSTSTSTPERR_MASK                (0x40U)
#define I2C_STAT_MSTSTSTPERR_SHIFT               (6U)
/*! MSTSTSTPERR - Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to
 *    this bit. It is also cleared automatically a 1 is written to MSTCONTINUE.
 *  0b0..No Start/Stop Error has occurred.
 *  0b1..The Master function has experienced a Start/Stop Error. A Start or Stop was detected at a time when it is
 *       not allowed by the I2C specification. The Master interface has stopped driving the bus and gone to an
 *       idle state, no action is required. A request for a Start could be made, or software could attempt to insure
 *       that the bus has not stalled.
 */
#define I2C_STAT_MSTSTSTPERR(x)                  (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MSTSTSTPERR_SHIFT)) & I2C_STAT_MSTSTSTPERR_MASK)
#define I2C_STAT_SLVPENDING_MASK                 (0x100U)
#define I2C_STAT_SLVPENDING_SHIFT                (8U)
/*! SLVPENDING - Slave Pending. Indicates that the Slave function is waiting to continue
 *    communication on the I2C-bus and needs software service. This flag will cause an interrupt when set if
 *    enabled via INTENSET. The SLVPENDING flag is not set when the DMA is handling an event (if the
 *    SLVDMA bit in the SLVCTL register is set). The SLVPENDING flag is read-only and is
 *    automatically cleared when a 1 is written to the SLVCONTINUE bit in the SLVCTL register. The point in time
 *    when SlvPending is set depends on whether the I2C interface is in HSCAPABLE mode. See Section
 *    25.7.2.2.2. When the I2C interface is configured to be HSCAPABLE, HS master codes are
 *    detected automatically. Due to the requirements of the HS I2C specification, slave addresses must
 *    also be detected automatically, since the address must be acknowledged before the clock can be
 *    stretched.
 *  0b0..In progress. The Slave function does not currently need service.
 *  0b1..Pending. The Slave function needs service. Information on what is needed can be found in the adjacent SLVSTATE field.
 */
#define I2C_STAT_SLVPENDING(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVPENDING_SHIFT)) & I2C_STAT_SLVPENDING_MASK)
#define I2C_STAT_SLVSTATE_MASK                   (0x600U)
#define I2C_STAT_SLVSTATE_SHIFT                  (9U)
/*! SLVSTATE - Slave State code. Each value of this field indicates a specific required service for
 *    the Slave function. All other values are reserved. See Table 401 for state values and actions.
 *    note that the occurrence of some states and how they are handled are affected by DMA mode and
 *    Automatic Operation modes.
 *  0b00..Slave address. Address plus R/W received. At least one of the four slave addresses has been matched by hardware.
 *  0b01..Slave receive. Received data is available (Slave Receiver mode).
 *  0b10..Slave transmit. Data can be transmitted (Slave Transmitter mode).
 */
#define I2C_STAT_SLVSTATE(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVSTATE_SHIFT)) & I2C_STAT_SLVSTATE_MASK)
#define I2C_STAT_SLVNOTSTR_MASK                  (0x800U)
#define I2C_STAT_SLVNOTSTR_SHIFT                 (11U)
/*! SLVNOTSTR - Slave Not Stretching. Indicates when the slave function is stretching the I2C clock.
 *    This is needed in order to gracefully invoke Deep Sleep or Power-down modes during slave
 *    operation. This read-only flag reflects the slave function status in real time.
 *  0b0..Stretching. The slave function is currently stretching the I2C bus clock. Deep-Sleep or Power-down mode cannot be entered at this time.
 *  0b1..Not stretching. The slave function is not currently stretching the I 2C bus clock. Deep-sleep or
 *       Power-down mode could be entered at this time.
 */
#define I2C_STAT_SLVNOTSTR(x)                    (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVNOTSTR_SHIFT)) & I2C_STAT_SLVNOTSTR_MASK)
#define I2C_STAT_SLVIDX_MASK                     (0x3000U)
#define I2C_STAT_SLVIDX_SHIFT                    (12U)
/*! SLVIDX - Slave address match Index. This field is valid when the I2C slave function has been
 *    selected by receiving an address that matches one of the slave addresses defined by any enabled
 *    slave address registers, and provides an identification of the address that was matched. It is
 *    possible that more than one address could be matched, but only one match can be reported here.
 *  0b00..Address 0. Slave address 0 was matched.
 *  0b01..Address 1. Slave address 1 was matched.
 *  0b10..Address 2. Slave address 2 was matched.
 *  0b11..Address 3. Slave address 3 was matched.
 */
#define I2C_STAT_SLVIDX(x)                       (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVIDX_SHIFT)) & I2C_STAT_SLVIDX_MASK)
#define I2C_STAT_SLVSEL_MASK                     (0x4000U)
#define I2C_STAT_SLVSEL_SHIFT                    (14U)
/*! SLVSEL - Slave selected flag. SLVSEL is set after an address match when software tells the Slave
 *    function to acknowledge the address, or when the address has been automatically acknowledged.
 *    It is cleared when another address cycle presents an address that does not match an enabled
 *    address on the Slave function, when slave software decides to NACK a matched address, when
 *    there is a Stop detected on the bus, when the master NACKs slave data, and in some combinations of
 *    Automatic Operation. SLVSEL is not cleared if software NACKs data.
 *  0b0..Not selected. The Slave function is not currently selected.
 *  0b1..Selected. The Slave function is currently selected.
 */
#define I2C_STAT_SLVSEL(x)                       (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVSEL_SHIFT)) & I2C_STAT_SLVSEL_MASK)
#define I2C_STAT_SLVDESEL_MASK                   (0x8000U)
#define I2C_STAT_SLVDESEL_SHIFT                  (15U)
/*! SLVDESEL - Slave Deselected flag. This flag will cause an interrupt when set if enabled via
 *    INTENSET. This flag can be cleared by writing a 1 to this bit.
 *  0b0..Not deselected. The Slave function has not become deselected. This does not mean that it is currently
 *       selected. That information can be found in the SLVSEL flag.
 *  0b1..Deselected. The Slave function has become deselected. This is specifically caused by the SLVSEL flag
 *       changing from 1 to 0. See the description of SLVSEL for details on when that event occurs.
 */
#define I2C_STAT_SLVDESEL(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SLVDESEL_SHIFT)) & I2C_STAT_SLVDESEL_MASK)
#define I2C_STAT_MONRDY_MASK                     (0x10000U)
#define I2C_STAT_MONRDY_SHIFT                    (16U)
/*! MONRDY - Monitor Ready. This flag is cleared when the MONRXDAT register is read.
 *  0b0..No data. The Monitor function does not currently have data available.
 *  0b1..Data waiting. The Monitor function has data waiting to be read.
 */
#define I2C_STAT_MONRDY(x)                       (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MONRDY_SHIFT)) & I2C_STAT_MONRDY_MASK)
#define I2C_STAT_MONOV_MASK                      (0x20000U)
#define I2C_STAT_MONOV_SHIFT                     (17U)
/*! MONOV - Monitor Overflow flag.
 *  0b0..No overrun. Monitor data has not overrun.
 *  0b1..Overrun. A Monitor data overrun has occurred. This can only happen when Monitor clock stretching not
 *       enabled via the MONCLKSTR bit in the CFG register. Writing 1 to this bit clears the flag.
 */
#define I2C_STAT_MONOV(x)                        (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MONOV_SHIFT)) & I2C_STAT_MONOV_MASK)
#define I2C_STAT_MONACTIVE_MASK                  (0x40000U)
#define I2C_STAT_MONACTIVE_SHIFT                 (18U)
/*! MONACTIVE - Monitor Active flag. Indicates when the Monitor function considers the I 2C bus to
 *    be active. Active is defined here as when some Master is on the bus: a bus Start has occurred
 *    more recently than a bus Stop.
 *  0b0..Inactive. The Monitor function considers the I2C bus to be inactive.
 *  0b1..Active. The Monitor function considers the I2C bus to be active.
 */
#define I2C_STAT_MONACTIVE(x)                    (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MONACTIVE_SHIFT)) & I2C_STAT_MONACTIVE_MASK)
#define I2C_STAT_MONIDLE_MASK                    (0x80000U)
#define I2C_STAT_MONIDLE_SHIFT                   (19U)
/*! MONIDLE - Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change
 *    from active to inactive. This can be used by software to decide when to process data
 *    accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the
 *    INTENSET register. The flag can be cleared by writing a 1 to this bit.
 *  0b0..Not idle. The I2C bus is not idle, or this flag has been cleared by software.
 *  0b1..Idle. The I2C bus has gone idle at least once since the last time this flag was cleared by software.
 */
#define I2C_STAT_MONIDLE(x)                      (((uint32_t)(((uint32_t)(x)) << I2C_STAT_MONIDLE_SHIFT)) & I2C_STAT_MONIDLE_MASK)
#define I2C_STAT_EVENTTIMEOUT_MASK               (0x1000000U)
#define I2C_STAT_EVENTTIMEOUT_SHIFT              (24U)
/*! EVENTTIMEOUT - Event Time-out Interrupt flag. Indicates when the time between events has been
 *    longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock
 *    edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus
 *    is idle.
 *  0b0..No time-out. I2C bus events have not caused a time-out.
 *  0b1..Event time-out. The time between I2C bus events has been longer than the time specified by the TIMEOUT register.
 */
#define I2C_STAT_EVENTTIMEOUT(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_STAT_EVENTTIMEOUT_SHIFT)) & I2C_STAT_EVENTTIMEOUT_MASK)
#define I2C_STAT_SCLTIMEOUT_MASK                 (0x2000000U)
#define I2C_STAT_SCLTIMEOUT_SHIFT                (25U)
/*! SCLTIMEOUT - SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the
 *    time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit.
 *  0b0..No time-out. SCL low time has not caused a time-out.
 *  0b1..Time-out. SCL low time has caused a time-out.
 */
#define I2C_STAT_SCLTIMEOUT(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_STAT_SCLTIMEOUT_SHIFT)) & I2C_STAT_SCLTIMEOUT_MASK)
/*! @} */

/*! @name INTENSET - Interrupt Enable Set and read register. */
/*! @{ */
#define I2C_INTENSET_MSTPENDINGEN_MASK           (0x1U)
#define I2C_INTENSET_MSTPENDINGEN_SHIFT          (0U)
/*! MSTPENDINGEN - Master Pending interrupt Enable.
 *  0b0..Disabled. The MstPending interrupt is disabled.
 *  0b1..Enabled. The MstPending interrupt is enabled.
 */
#define I2C_INTENSET_MSTPENDINGEN(x)             (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MSTPENDINGEN_SHIFT)) & I2C_INTENSET_MSTPENDINGEN_MASK)
#define I2C_INTENSET_MSTARBLOSSEN_MASK           (0x10U)
#define I2C_INTENSET_MSTARBLOSSEN_SHIFT          (4U)
/*! MSTARBLOSSEN - Master Arbitration Loss interrupt Enable.
 *  0b0..Disabled. The MstArbLoss interrupt is disabled.
 *  0b1..Enabled. The MstArbLoss interrupt is enabled.
 */
#define I2C_INTENSET_MSTARBLOSSEN(x)             (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MSTARBLOSSEN_SHIFT)) & I2C_INTENSET_MSTARBLOSSEN_MASK)
#define I2C_INTENSET_MSTSTSTPERREN_MASK          (0x40U)
#define I2C_INTENSET_MSTSTSTPERREN_SHIFT         (6U)
/*! MSTSTSTPERREN - Master Start/Stop Error interrupt Enable.
 *  0b0..Disabled. The MstStStpErr interrupt is disabled.
 *  0b1..Enabled. The MstStStpErr interrupt is enabled.
 */
#define I2C_INTENSET_MSTSTSTPERREN(x)            (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MSTSTSTPERREN_SHIFT)) & I2C_INTENSET_MSTSTSTPERREN_MASK)
#define I2C_INTENSET_SLVPENDINGEN_MASK           (0x100U)
#define I2C_INTENSET_SLVPENDINGEN_SHIFT          (8U)
/*! SLVPENDINGEN - Slave Pending interrupt Enable.
 *  0b0..Disabled. The SlvPending interrupt is disabled.
 *  0b1..Enabled. The SlvPending interrupt is enabled.
 */
#define I2C_INTENSET_SLVPENDINGEN(x)             (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_SLVPENDINGEN_SHIFT)) & I2C_INTENSET_SLVPENDINGEN_MASK)
#define I2C_INTENSET_SLVNOTSTREN_MASK            (0x800U)
#define I2C_INTENSET_SLVNOTSTREN_SHIFT           (11U)
/*! SLVNOTSTREN - Slave Not Stretching interrupt Enable.
 *  0b0..Disabled. The SlvNotStr interrupt is disabled.
 *  0b1..Enabled. The SlvNotStr interrupt is enabled.
 */
#define I2C_INTENSET_SLVNOTSTREN(x)              (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_SLVNOTSTREN_SHIFT)) & I2C_INTENSET_SLVNOTSTREN_MASK)
#define I2C_INTENSET_SLVDESELEN_MASK             (0x8000U)
#define I2C_INTENSET_SLVDESELEN_SHIFT            (15U)
/*! SLVDESELEN - Slave Deselect interrupt Enable.
 *  0b0..Disabled. The SlvDeSel interrupt is disabled.
 *  0b1..Enabled. The SlvDeSel interrupt is enabled.
 */
#define I2C_INTENSET_SLVDESELEN(x)               (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_SLVDESELEN_SHIFT)) & I2C_INTENSET_SLVDESELEN_MASK)
#define I2C_INTENSET_MONRDYEN_MASK               (0x10000U)
#define I2C_INTENSET_MONRDYEN_SHIFT              (16U)
/*! MONRDYEN - Monitor data Ready interrupt Enable.
 *  0b0..Disabled. The MonRdy interrupt is disabled.
 *  0b1..Enabled. The MonRdy interrupt is enabled.
 */
#define I2C_INTENSET_MONRDYEN(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MONRDYEN_SHIFT)) & I2C_INTENSET_MONRDYEN_MASK)
#define I2C_INTENSET_MONOVEN_MASK                (0x20000U)
#define I2C_INTENSET_MONOVEN_SHIFT               (17U)
/*! MONOVEN - Monitor Overrun interrupt Enable.
 *  0b0..Disabled. The MonOv interrupt is disabled.
 *  0b1..Enabled. The MonOv interrupt is enabled.
 */
#define I2C_INTENSET_MONOVEN(x)                  (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MONOVEN_SHIFT)) & I2C_INTENSET_MONOVEN_MASK)
#define I2C_INTENSET_MONIDLEEN_MASK              (0x80000U)
#define I2C_INTENSET_MONIDLEEN_SHIFT             (19U)
/*! MONIDLEEN - Monitor Idle interrupt Enable.
 *  0b0..Disabled. The MonIdle interrupt is disabled.
 *  0b1..Enabled. The MonIdle interrupt is enabled.
 */
#define I2C_INTENSET_MONIDLEEN(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_MONIDLEEN_SHIFT)) & I2C_INTENSET_MONIDLEEN_MASK)
#define I2C_INTENSET_EVENTTIMEOUTEN_MASK         (0x1000000U)
#define I2C_INTENSET_EVENTTIMEOUTEN_SHIFT        (24U)
/*! EVENTTIMEOUTEN - Event time-out interrupt Enable.
 *  0b0..Disabled. The Event time-out interrupt is disabled.
 *  0b1..Enabled. The Event time-out interrupt is enabled.
 */
#define I2C_INTENSET_EVENTTIMEOUTEN(x)           (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_EVENTTIMEOUTEN_SHIFT)) & I2C_INTENSET_EVENTTIMEOUTEN_MASK)
#define I2C_INTENSET_SCLTIMEOUTEN_MASK           (0x2000000U)
#define I2C_INTENSET_SCLTIMEOUTEN_SHIFT          (25U)
/*! SCLTIMEOUTEN - SCL time-out interrupt Enable.
 *  0b0..Disabled. The SCL time-out interrupt is disabled.
 *  0b1..Enabled. The SCL time-out interrupt is enabled.
 */
#define I2C_INTENSET_SCLTIMEOUTEN(x)             (((uint32_t)(((uint32_t)(x)) << I2C_INTENSET_SCLTIMEOUTEN_SHIFT)) & I2C_INTENSET_SCLTIMEOUTEN_MASK)
/*! @} */

/*! @name INTENCLR - Interrupt Enable Clear register. */
/*! @{ */
#define I2C_INTENCLR_MSTPENDINGCLR_MASK          (0x1U)
#define I2C_INTENCLR_MSTPENDINGCLR_SHIFT         (0U)
/*! MSTPENDINGCLR - Master Pending interrupt clear. Writing 1 to this bit clears the corresponding
 *    bit in the INTENSET register if implemented.
 */
#define I2C_INTENCLR_MSTPENDINGCLR(x)            (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MSTPENDINGCLR_SHIFT)) & I2C_INTENCLR_MSTPENDINGCLR_MASK)
#define I2C_INTENCLR_MSTARBLOSSCLR_MASK          (0x10U)
#define I2C_INTENCLR_MSTARBLOSSCLR_SHIFT         (4U)
/*! MSTARBLOSSCLR - Master Arbitration Loss interrupt clear.
 */
#define I2C_INTENCLR_MSTARBLOSSCLR(x)            (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MSTARBLOSSCLR_SHIFT)) & I2C_INTENCLR_MSTARBLOSSCLR_MASK)
#define I2C_INTENCLR_MSTSTSTPERRCLR_MASK         (0x40U)
#define I2C_INTENCLR_MSTSTSTPERRCLR_SHIFT        (6U)
/*! MSTSTSTPERRCLR - Master Start/Stop Error interrupt clear.
 */
#define I2C_INTENCLR_MSTSTSTPERRCLR(x)           (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MSTSTSTPERRCLR_SHIFT)) & I2C_INTENCLR_MSTSTSTPERRCLR_MASK)
#define I2C_INTENCLR_SLVPENDINGCLR_MASK          (0x100U)
#define I2C_INTENCLR_SLVPENDINGCLR_SHIFT         (8U)
/*! SLVPENDINGCLR - Slave Pending interrupt clear.
 */
#define I2C_INTENCLR_SLVPENDINGCLR(x)            (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_SLVPENDINGCLR_SHIFT)) & I2C_INTENCLR_SLVPENDINGCLR_MASK)
#define I2C_INTENCLR_SLVNOTSTRCLR_MASK           (0x800U)
#define I2C_INTENCLR_SLVNOTSTRCLR_SHIFT          (11U)
/*! SLVNOTSTRCLR - Slave Not Stretching interrupt clear.
 */
#define I2C_INTENCLR_SLVNOTSTRCLR(x)             (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_SLVNOTSTRCLR_SHIFT)) & I2C_INTENCLR_SLVNOTSTRCLR_MASK)
#define I2C_INTENCLR_SLVDESELCLR_MASK            (0x8000U)
#define I2C_INTENCLR_SLVDESELCLR_SHIFT           (15U)
/*! SLVDESELCLR - Slave Deselect interrupt clear.
 */
#define I2C_INTENCLR_SLVDESELCLR(x)              (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_SLVDESELCLR_SHIFT)) & I2C_INTENCLR_SLVDESELCLR_MASK)
#define I2C_INTENCLR_MONRDYCLR_MASK              (0x10000U)
#define I2C_INTENCLR_MONRDYCLR_SHIFT             (16U)
/*! MONRDYCLR - Monitor data Ready interrupt clear.
 */
#define I2C_INTENCLR_MONRDYCLR(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MONRDYCLR_SHIFT)) & I2C_INTENCLR_MONRDYCLR_MASK)
#define I2C_INTENCLR_MONOVCLR_MASK               (0x20000U)
#define I2C_INTENCLR_MONOVCLR_SHIFT              (17U)
/*! MONOVCLR - Monitor Overrun interrupt clear.
 */
#define I2C_INTENCLR_MONOVCLR(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MONOVCLR_SHIFT)) & I2C_INTENCLR_MONOVCLR_MASK)
#define I2C_INTENCLR_MONIDLECLR_MASK             (0x80000U)
#define I2C_INTENCLR_MONIDLECLR_SHIFT            (19U)
/*! MONIDLECLR - Monitor Idle interrupt clear.
 */
#define I2C_INTENCLR_MONIDLECLR(x)               (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_MONIDLECLR_SHIFT)) & I2C_INTENCLR_MONIDLECLR_MASK)
#define I2C_INTENCLR_EVENTTIMEOUTCLR_MASK        (0x1000000U)
#define I2C_INTENCLR_EVENTTIMEOUTCLR_SHIFT       (24U)
/*! EVENTTIMEOUTCLR - Event time-out interrupt clear.
 */
#define I2C_INTENCLR_EVENTTIMEOUTCLR(x)          (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_EVENTTIMEOUTCLR_SHIFT)) & I2C_INTENCLR_EVENTTIMEOUTCLR_MASK)
#define I2C_INTENCLR_SCLTIMEOUTCLR_MASK          (0x2000000U)
#define I2C_INTENCLR_SCLTIMEOUTCLR_SHIFT         (25U)
/*! SCLTIMEOUTCLR - SCL time-out interrupt clear.
 */
#define I2C_INTENCLR_SCLTIMEOUTCLR(x)            (((uint32_t)(((uint32_t)(x)) << I2C_INTENCLR_SCLTIMEOUTCLR_SHIFT)) & I2C_INTENCLR_SCLTIMEOUTCLR_MASK)
/*! @} */

/*! @name TIMEOUT - Time-out value register. */
/*! @{ */
#define I2C_TIMEOUT_TOMIN_MASK                   (0xFU)
#define I2C_TIMEOUT_TOMIN_SHIFT                  (0U)
/*! TOMIN - Time-out time value, bottom four bits. These are hard-wired to 0xF. This gives a minimum
 *    time-out of 16 I2C function clocks and also a time-out resolution of 16 I2C function clocks.
 */
#define I2C_TIMEOUT_TOMIN(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_TIMEOUT_TOMIN_SHIFT)) & I2C_TIMEOUT_TOMIN_MASK)
#define I2C_TIMEOUT_TO_MASK                      (0xFFF0U)
#define I2C_TIMEOUT_TO_SHIFT                     (4U)
/*! TO - Time-out time value. Specifies the time-out interval value in increments of 16 I 2C
 *    function clocks, as defined by the CLKDIV register. To change this value while I2C is in operation,
 *    disable all time-outs, write a new value to TIMEOUT, then re-enable time-outs. 0x000 = A
 *    time-out will occur after 16 counts of the I2C function clock. 0x001 = A time-out will occur after
 *    32 counts of the I2C function clock. 0xFFF = A time-out will occur after 65,536 counts of the
 *    I2C function clock.
 */
#define I2C_TIMEOUT_TO(x)                        (((uint32_t)(((uint32_t)(x)) << I2C_TIMEOUT_TO_SHIFT)) & I2C_TIMEOUT_TO_MASK)
/*! @} */

/*! @name CLKDIV - Clock pre-divider for the entire I2C interface. This determines what time increments are used for the MSTTIME register, and controls some timing of the Slave function. */
/*! @{ */
#define I2C_CLKDIV_DIVVAL_MASK                   (0xFFFFU)
#define I2C_CLKDIV_DIVVAL_SHIFT                  (0U)
/*! DIVVAL - This field controls how the Flexcomm clock (FCLK) is used by the I2C functions that
 *    need an internal clock in order to operate. 0x0000 = FCLK is used directly by the I2C. 0x0001 =
 *    FCLK is divided by 2 before use. 0x0002 = FCLK is divided by 3 before use. 0xFFFF = FCLK is
 *    divided by 65,536 before use.
 */
#define I2C_CLKDIV_DIVVAL(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_CLKDIV_DIVVAL_SHIFT)) & I2C_CLKDIV_DIVVAL_MASK)
/*! @} */

/*! @name INTSTAT - Interrupt Status register for Master, Slave, and Monitor functions. */
/*! @{ */
#define I2C_INTSTAT_MSTPENDING_MASK              (0x1U)
#define I2C_INTSTAT_MSTPENDING_SHIFT             (0U)
/*! MSTPENDING - Master Pending.
 */
#define I2C_INTSTAT_MSTPENDING(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MSTPENDING_SHIFT)) & I2C_INTSTAT_MSTPENDING_MASK)
#define I2C_INTSTAT_MSTARBLOSS_MASK              (0x10U)
#define I2C_INTSTAT_MSTARBLOSS_SHIFT             (4U)
/*! MSTARBLOSS - Master Arbitration Loss flag.
 */
#define I2C_INTSTAT_MSTARBLOSS(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MSTARBLOSS_SHIFT)) & I2C_INTSTAT_MSTARBLOSS_MASK)
#define I2C_INTSTAT_MSTSTSTPERR_MASK             (0x40U)
#define I2C_INTSTAT_MSTSTSTPERR_SHIFT            (6U)
/*! MSTSTSTPERR - Master Start/Stop Error flag.
 */
#define I2C_INTSTAT_MSTSTSTPERR(x)               (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MSTSTSTPERR_SHIFT)) & I2C_INTSTAT_MSTSTSTPERR_MASK)
#define I2C_INTSTAT_SLVPENDING_MASK              (0x100U)
#define I2C_INTSTAT_SLVPENDING_SHIFT             (8U)
/*! SLVPENDING - Slave Pending.
 */
#define I2C_INTSTAT_SLVPENDING(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_SLVPENDING_SHIFT)) & I2C_INTSTAT_SLVPENDING_MASK)
#define I2C_INTSTAT_SLVNOTSTR_MASK               (0x800U)
#define I2C_INTSTAT_SLVNOTSTR_SHIFT              (11U)
/*! SLVNOTSTR - Slave Not Stretching status.
 */
#define I2C_INTSTAT_SLVNOTSTR(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_SLVNOTSTR_SHIFT)) & I2C_INTSTAT_SLVNOTSTR_MASK)
#define I2C_INTSTAT_SLVDESEL_MASK                (0x8000U)
#define I2C_INTSTAT_SLVDESEL_SHIFT               (15U)
/*! SLVDESEL - Slave Deselected flag.
 */
#define I2C_INTSTAT_SLVDESEL(x)                  (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_SLVDESEL_SHIFT)) & I2C_INTSTAT_SLVDESEL_MASK)
#define I2C_INTSTAT_MONRDY_MASK                  (0x10000U)
#define I2C_INTSTAT_MONRDY_SHIFT                 (16U)
/*! MONRDY - Monitor Ready.
 */
#define I2C_INTSTAT_MONRDY(x)                    (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MONRDY_SHIFT)) & I2C_INTSTAT_MONRDY_MASK)
#define I2C_INTSTAT_MONOV_MASK                   (0x20000U)
#define I2C_INTSTAT_MONOV_SHIFT                  (17U)
/*! MONOV - Monitor Overflow flag.
 */
#define I2C_INTSTAT_MONOV(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MONOV_SHIFT)) & I2C_INTSTAT_MONOV_MASK)
#define I2C_INTSTAT_MONIDLE_MASK                 (0x80000U)
#define I2C_INTSTAT_MONIDLE_SHIFT                (19U)
/*! MONIDLE - Monitor Idle flag.
 */
#define I2C_INTSTAT_MONIDLE(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_MONIDLE_SHIFT)) & I2C_INTSTAT_MONIDLE_MASK)
#define I2C_INTSTAT_EVENTTIMEOUT_MASK            (0x1000000U)
#define I2C_INTSTAT_EVENTTIMEOUT_SHIFT           (24U)
/*! EVENTTIMEOUT - Event time-out Interrupt flag.
 */
#define I2C_INTSTAT_EVENTTIMEOUT(x)              (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_EVENTTIMEOUT_SHIFT)) & I2C_INTSTAT_EVENTTIMEOUT_MASK)
#define I2C_INTSTAT_SCLTIMEOUT_MASK              (0x2000000U)
#define I2C_INTSTAT_SCLTIMEOUT_SHIFT             (25U)
/*! SCLTIMEOUT - SCL time-out Interrupt flag.
 */
#define I2C_INTSTAT_SCLTIMEOUT(x)                (((uint32_t)(((uint32_t)(x)) << I2C_INTSTAT_SCLTIMEOUT_SHIFT)) & I2C_INTSTAT_SCLTIMEOUT_MASK)
/*! @} */

/*! @name MSTCTL - Master control register. */
/*! @{ */
#define I2C_MSTCTL_MSTCONTINUE_MASK              (0x1U)
#define I2C_MSTCTL_MSTCONTINUE_SHIFT             (0U)
/*! MSTCONTINUE - Master Continue.
 *  0b0..No effect.
 *  0b1..Informs the Master function to continue to the next operation.
 */
#define I2C_MSTCTL_MSTCONTINUE(x)                (((uint32_t)(((uint32_t)(x)) << I2C_MSTCTL_MSTCONTINUE_SHIFT)) & I2C_MSTCTL_MSTCONTINUE_MASK)
#define I2C_MSTCTL_MSTSTART_MASK                 (0x2U)
#define I2C_MSTCTL_MSTSTART_SHIFT                (1U)
/*! MSTSTART - Master Start control.
 *  0b0..No effect.
 *  0b1..Start. A Start will be generated on the I2C bus at the next allowed time.
 */
#define I2C_MSTCTL_MSTSTART(x)                   (((uint32_t)(((uint32_t)(x)) << I2C_MSTCTL_MSTSTART_SHIFT)) & I2C_MSTCTL_MSTSTART_MASK)
#define I2C_MSTCTL_MSTSTOP_MASK                  (0x4U)
#define I2C_MSTCTL_MSTSTOP_SHIFT                 (2U)
/*! MSTSTOP - Master Stop control.
 *  0b0..No effect.
 *  0b1..Stop. A Stop will be generated on the I2C bus at the next allowed time, preceded by a NACK to the slave
 *       if the master is receiving data from the slave (Master Receiver mode).
 */
#define I2C_MSTCTL_MSTSTOP(x)                    (((uint32_t)(((uint32_t)(x)) << I2C_MSTCTL_MSTSTOP_SHIFT)) & I2C_MSTCTL_MSTSTOP_MASK)
/*! @} */

/*! @name MSTTIME - Master timing configuration. */
/*! @{ */
#define I2C_MSTTIME_MSTSCLLOW_MASK               (0x7U)
#define I2C_MSTTIME_MSTSCLLOW_SHIFT              (0U)
/*! MSTSCLLOW - Master SCL Low time. Specifies the minimum low time that will be asserted by this
 *    master on SCL. Other devices on the bus (masters or slaves) could lengthen this time. This
 *    corresponds to the parameter t LOW in the I2C bus specification. I2C bus specification parameters
 *    tBUF and tSU;STA have the same values and are also controlled by MSTSCLLOW.
 *  0b000..2 clocks. Minimum SCL low time is 2 clocks of the I2C clock pre-divider.
 *  0b001..3 clocks. Minimum SCL low time is 3 clocks of the I2C clock pre-divider.
 *  0b010..4 clocks. Minimum SCL low time is 4 clocks of the I2C clock pre-divider.
 *  0b011..5 clocks. Minimum SCL low time is 5 clocks of the I2C clock pre-divider.
 *  0b100..6 clocks. Minimum SCL low time is 6 clocks of the I2C clock pre-divider.
 *  0b101..7 clocks. Minimum SCL low time is 7 clocks of the I2C clock pre-divider.
 *  0b110..8 clocks. Minimum SCL low time is 8 clocks of the I2C clock pre-divider.
 *  0b111..9 clocks. Minimum SCL low time is 9 clocks of the I2C clock pre-divider.
 */
#define I2C_MSTTIME_MSTSCLLOW(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_MSTTIME_MSTSCLLOW_SHIFT)) & I2C_MSTTIME_MSTSCLLOW_MASK)
#define I2C_MSTTIME_MSTSCLHIGH_MASK              (0x70U)
#define I2C_MSTTIME_MSTSCLHIGH_SHIFT             (4U)
/*! MSTSCLHIGH - Master SCL High time. Specifies the minimum high time that will be asserted by this
 *    master on SCL. Other masters in a multi-master system could shorten this time. This
 *    corresponds to the parameter tHIGH in the I2C bus specification. I2C bus specification parameters
 *    tSU;STO and tHD;STA have the same values and are also controlled by MSTSCLHIGH.
 *  0b000..2 clocks. Minimum SCL high time is 2 clock of the I2C clock pre-divider.
 *  0b001..3 clocks. Minimum SCL high time is 3 clocks of the I2C clock pre-divider .
 *  0b010..4 clocks. Minimum SCL high time is 4 clock of the I2C clock pre-divider.
 *  0b011..5 clocks. Minimum SCL high time is 5 clock of the I2C clock pre-divider.
 *  0b100..6 clocks. Minimum SCL high time is 6 clock of the I2C clock pre-divider.
 *  0b101..7 clocks. Minimum SCL high time is 7 clock of the I2C clock pre-divider.
 *  0b110..8 clocks. Minimum SCL high time is 8 clock of the I2C clock pre-divider.
 *  0b111..9 clocks. Minimum SCL high time is 9 clocks of the I2C clock pre-divider.
 */
#define I2C_MSTTIME_MSTSCLHIGH(x)                (((uint32_t)(((uint32_t)(x)) << I2C_MSTTIME_MSTSCLHIGH_SHIFT)) & I2C_MSTTIME_MSTSCLHIGH_MASK)
/*! @} */

/*! @name MSTDAT - Combined Master receiver and transmitter data register. */
/*! @{ */
#define I2C_MSTDAT_DATA_MASK                     (0xFFU)
#define I2C_MSTDAT_DATA_SHIFT                    (0U)
/*! DATA - Master function data register. Read: read the most recently received data for the Master
 *    function. Write: transmit data using the Master function.
 */
#define I2C_MSTDAT_DATA(x)                       (((uint32_t)(((uint32_t)(x)) << I2C_MSTDAT_DATA_SHIFT)) & I2C_MSTDAT_DATA_MASK)
/*! @} */

/*! @name SLVCTL - Slave control register. */
/*! @{ */
#define I2C_SLVCTL_SLVCONTINUE_MASK              (0x1U)
#define I2C_SLVCTL_SLVCONTINUE_SHIFT             (0U)
/*! SLVCONTINUE - Slave Continue.
 *  0b0..No effect.
 *  0b1..Continue. Informs the Slave function to continue to the next operation. This must done after writing
 *       transmit data, reading received data, or any other housekeeping related to the next bus operation.
 */
#define I2C_SLVCTL_SLVCONTINUE(x)                (((uint32_t)(((uint32_t)(x)) << I2C_SLVCTL_SLVCONTINUE_SHIFT)) & I2C_SLVCTL_SLVCONTINUE_MASK)
#define I2C_SLVCTL_SLVNACK_MASK                  (0x2U)
#define I2C_SLVCTL_SLVNACK_SHIFT                 (1U)
/*! SLVNACK - Slave NACK.
 *  0b0..No effect.
 *  0b1..NACK. Causes the Slave function to NACK the master when the slave is receiving data from the master (Slave Receiver mode).
 */
#define I2C_SLVCTL_SLVNACK(x)                    (((uint32_t)(((uint32_t)(x)) << I2C_SLVCTL_SLVNACK_SHIFT)) & I2C_SLVCTL_SLVNACK_MASK)
/*! @} */

/*! @name SLVDAT - Combined Slave receiver and transmitter data register. */
/*! @{ */
#define I2C_SLVDAT_DATA_MASK                     (0xFFU)
#define I2C_SLVDAT_DATA_SHIFT                    (0U)
/*! DATA - Slave function data register. Read: read the most recently received data for the Slave
 *    function. Write: transmit data using the Slave function.
 */
#define I2C_SLVDAT_DATA(x)                       (((uint32_t)(((uint32_t)(x)) << I2C_SLVDAT_DATA_SHIFT)) & I2C_SLVDAT_DATA_MASK)
/*! @} */

/*! @name SLVADR - Slave address register. */
/*! @{ */
#define I2C_SLVADR_SADISABLE_MASK                (0x1U)
#define I2C_SLVADR_SADISABLE_SHIFT               (0U)
/*! SADISABLE - Slave Address n Disable.
 *  0b0..Enabled. Slave Address n is enabled.
 *  0b1..Ignored Slave Address n is ignored.
 */
#define I2C_SLVADR_SADISABLE(x)                  (((uint32_t)(((uint32_t)(x)) << I2C_SLVADR_SADISABLE_SHIFT)) & I2C_SLVADR_SADISABLE_MASK)
#define I2C_SLVADR_SLVADR_MASK                   (0xFEU)
#define I2C_SLVADR_SLVADR_SHIFT                  (1U)
/*! SLVADR - Slave Address. Seven bit slave address that is compared to received addresses if enabled.
 */
#define I2C_SLVADR_SLVADR(x)                     (((uint32_t)(((uint32_t)(x)) << I2C_SLVADR_SLVADR_SHIFT)) & I2C_SLVADR_SLVADR_MASK)
/*! @} */

/* The count of I2C_SLVADR */
#define I2C_SLVADR_COUNT                         (4U)

/*! @name SLVQUAL0 - Slave Qualification for address 0. */
/*! @{ */
#define I2C_SLVQUAL0_QUALMODE0_MASK              (0x1U)
#define I2C_SLVQUAL0_QUALMODE0_SHIFT             (0U)
/*! QUALMODE0 - Qualify mode for slave address 0.
 *  0b0..Mask. The SLVQUAL0 field is used as a logical mask for matching address 0.
 *  0b1..Extend. The SLVQUAL0 field is used to extend address 0 matching in a range of addresses.
 */
#define I2C_SLVQUAL0_QUALMODE0(x)                (((uint32_t)(((uint32_t)(x)) << I2C_SLVQUAL0_QUALMODE0_SHIFT)) & I2C_SLVQUAL0_QUALMODE0_MASK)
#define I2C_SLVQUAL0_SLVQUAL0_MASK               (0xFEU)
#define I2C_SLVQUAL0_SLVQUAL0_SHIFT              (1U)
/*! SLVQUAL0 - Slave address Qualifier for address 0. A value of 0 causes the address in SLVADR0 to
 *    be used as-is, assuming that it is enabled. If QUALMODE0 = 0, any bit in this field which is
 *    set to 1 will cause an automatic match of the corresponding bit of the received address when it
 *    is compared to the SLVADR0 register. If QUALMODE0 = 1, an address range is matched for
 *    address 0. This range extends from the value defined by SLVADR0 to the address defined by SLVQUAL0
 *    (address matches when SLVADR0[7:1] <= received address <= SLVQUAL0[7:1]).
 */
#define I2C_SLVQUAL0_SLVQUAL0(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_SLVQUAL0_SLVQUAL0_SHIFT)) & I2C_SLVQUAL0_SLVQUAL0_MASK)
/*! @} */

/*! @name MONRXDAT - Monitor receiver data register. */
/*! @{ */
#define I2C_MONRXDAT_MONRXDAT_MASK               (0xFFU)
#define I2C_MONRXDAT_MONRXDAT_SHIFT              (0U)
/*! MONRXDAT - Monitor function Receiver Data. This reflects every data byte that passes on the I2C pins.
 */
#define I2C_MONRXDAT_MONRXDAT(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_MONRXDAT_MONRXDAT_SHIFT)) & I2C_MONRXDAT_MONRXDAT_MASK)
#define I2C_MONRXDAT_MONSTART_MASK               (0x100U)
#define I2C_MONRXDAT_MONSTART_SHIFT              (8U)
/*! MONSTART - Monitor Received Start.
 *  0b0..No start detected. The Monitor function has not detected a Start event on the I2C bus.
 *  0b1..Start detected. The Monitor function has detected a Start event on the I2C bus.
 */
#define I2C_MONRXDAT_MONSTART(x)                 (((uint32_t)(((uint32_t)(x)) << I2C_MONRXDAT_MONSTART_SHIFT)) & I2C_MONRXDAT_MONSTART_MASK)
#define I2C_MONRXDAT_MONRESTART_MASK             (0x200U)
#define I2C_MONRXDAT_MONRESTART_SHIFT            (9U)
/*! MONRESTART - Monitor Received Repeated Start.
 *  0b0..No repeated start detected. The Monitor function has not detected a Repeated Start event on the I2C bus.
 *  0b1..Repeated start detected. The Monitor function has detected a Repeated Start event on the I2C bus.
 */
#define I2C_MONRXDAT_MONRESTART(x)               (((uint32_t)(((uint32_t)(x)) << I2C_MONRXDAT_MONRESTART_SHIFT)) & I2C_MONRXDAT_MONRESTART_MASK)
#define I2C_MONRXDAT_MONNACK_MASK                (0x400U)
#define I2C_MONRXDAT_MONNACK_SHIFT               (10U)
/*! MONNACK - Monitor Received NACK.
 *  0b0..Acknowledged. The data currently being provided by the Monitor function was acknowledged by at least one master or slave receiver.
 *  0b1..Not acknowledged. The data currently being provided by the Monitor function was not acknowledged by any receiver.
 */
#define I2C_MONRXDAT_MONNACK(x)                  (((uint32_t)(((uint32_t)(x)) << I2C_MONRXDAT_MONNACK_SHIFT)) & I2C_MONRXDAT_MONNACK_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group I2C_Register_Masks */


/* I2C - Peripheral instance base addresses */
/** Peripheral I2C0 base address */
#define I2C0_BASE                                (0x40050000u)
/** Peripheral I2C0 base pointer */
#define I2C0                                     ((I2C_Type *)I2C0_BASE)
/** Array initializer of I2C peripheral base addresses */
#define I2C_BASE_ADDRS                           { I2C0_BASE }
/** Array initializer of I2C peripheral base pointers */
#define I2C_BASE_PTRS                            { I2C0 }
/** Interrupt vectors for the I2C peripheral type */
#define I2C_IRQS                                 { I2C0_IRQn }

/*!
 * @}
 */ /* end of group I2C_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- IOCON Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup IOCON_Peripheral_Access_Layer IOCON Peripheral Access Layer
 * @{
 */

/** IOCON - Register Layout Typedef */
typedef struct {
  __IO uint32_t PIO[19];                           /**< Digital I/O control for pins PIO0_17..Digital I/O control for pins PIO0_14, array offset: 0x0, array step: 0x4 */
} IOCON_Type;

/* ----------------------------------------------------------------------------
   -- IOCON Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup IOCON_Register_Masks IOCON Register Masks
 * @{
 */

/*! @name PIO - Digital I/O control for pins PIO0_17..Digital I/O control for pins PIO0_14 */
/*! @{ */
#define IOCON_PIO_MODE_MASK                      (0x18U)
#define IOCON_PIO_MODE_SHIFT                     (3U)
/*! MODE - Selects function mode (on-chip pull-up/pull-down resistor control).
 *  0b00..Inactive. Inactive (no pull-down/pull-up resistor enabled).
 *  0b01..Pull-down. Pull-down resistor enabled.
 *  0b10..Pull-up. Pull-up resistor enabled.
 *  0b11..Repeater. Repeater mode.
 */
#define IOCON_PIO_MODE(x)                        (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_MODE_SHIFT)) & IOCON_PIO_MODE_MASK)
#define IOCON_PIO_HYS_MASK                       (0x20U)
#define IOCON_PIO_HYS_SHIFT                      (5U)
/*! HYS - Hysteresis.
 *  0b0..Disable
 *  0b1..Enable
 */
#define IOCON_PIO_HYS(x)                         (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_HYS_SHIFT)) & IOCON_PIO_HYS_MASK)
#define IOCON_PIO_INV_MASK                       (0x40U)
#define IOCON_PIO_INV_SHIFT                      (6U)
/*! INV - Invert input
 *  0b0..Input not inverted (HIGH on pin reads as 1; LOW on pin reads as 0).
 *  0b1..Input inverted (HIGH on pin reads as 0, LOW on pin reads as 1).
 */
#define IOCON_PIO_INV(x)                         (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_INV_SHIFT)) & IOCON_PIO_INV_MASK)
#define IOCON_PIO_I2CMODE_MASK                   (0x300U)
#define IOCON_PIO_I2CMODE_SHIFT                  (8U)
/*! I2CMODE - Selects I2C mode.
 *  0b00..Standard mode/ Fast-mode I2C.
 *  0b01..Standard GPIO functionality. Requires external pull-up for GPIO output function.
 *  0b10..Fast-mode Plus I2C
 *  0b11..Reserved
 */
#define IOCON_PIO_I2CMODE(x)                     (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_I2CMODE_SHIFT)) & IOCON_PIO_I2CMODE_MASK)
#define IOCON_PIO_OD_MASK                        (0x400U)
#define IOCON_PIO_OD_SHIFT                       (10U)
/*! OD - Open-drain mode.
 *  0b0..Disable.
 *  0b1..Open-drain mode enabled. Remark: This is not a true open-drain mode.
 */
#define IOCON_PIO_OD(x)                          (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_OD_SHIFT)) & IOCON_PIO_OD_MASK)
#define IOCON_PIO_S_MODE_MASK                    (0x1800U)
#define IOCON_PIO_S_MODE_SHIFT                   (11U)
/*! S_MODE - Digital filter sample mode.
 *  0b00..Bypass input filter.
 *  0b01..1 clock cycle. Input pulses shorter than one filter clock are rejected.
 *  0b10..2 clock cycles. Input pulses shorter than two filter clocks are rejected.
 *  0b11..3 clock cycles. Input pulses shorter than three filter clocks are rejected.
 */
#define IOCON_PIO_S_MODE(x)                      (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_S_MODE_SHIFT)) & IOCON_PIO_S_MODE_MASK)
#define IOCON_PIO_CLK_DIV_MASK                   (0xE000U)
#define IOCON_PIO_CLK_DIV_SHIFT                  (13U)
/*! CLK_DIV - Select peripheral clock divider for input filter sampling clock. Value 0x7 is reserved.
 *  0b000..IOCONCLKDIV0
 *  0b001..IOCONCLKDIV1
 *  0b010..IOCONCLKDIV2
 *  0b011..IOCONCLKDIV3
 *  0b100..IOCONCLKDIV4
 *  0b101..IOCONCLKDIV5
 *  0b110..IOCONCLKDIV6
 */
#define IOCON_PIO_CLK_DIV(x)                     (((uint32_t)(((uint32_t)(x)) << IOCON_PIO_CLK_DIV_SHIFT)) & IOCON_PIO_CLK_DIV_MASK)
/*! @} */

/* The count of IOCON_PIO */
#define IOCON_PIO_COUNT                          (19U)


/*!
 * @}
 */ /* end of group IOCON_Register_Masks */


/* IOCON - Peripheral instance base addresses */
/** Peripheral IOCON base address */
#define IOCON_BASE                               (0x40044000u)
/** Peripheral IOCON base pointer */
#define IOCON                                    ((IOCON_Type *)IOCON_BASE)
/** Array initializer of IOCON peripheral base addresses */
#define IOCON_BASE_ADDRS                         { IOCON_BASE }
/** Array initializer of IOCON peripheral base pointers */
#define IOCON_BASE_PTRS                          { IOCON }

#define    IOCON_INDEX_PIO0_17       (0 )
#define    IOCON_INDEX_PIO0_13       (1 )
#define    IOCON_INDEX_PIO0_12       (2 )
#define    IOCON_INDEX_PIO0_5        (3 )
#define    IOCON_INDEX_PIO0_4        (4 )
#define    IOCON_INDEX_PIO0_3        (5 )
#define    IOCON_INDEX_PIO0_2        (6 )
#define    IOCON_INDEX_PIO0_11       (7 )
#define    IOCON_INDEX_PIO0_10       (8 )
#define    IOCON_INDEX_PIO0_16       (9 )
#define    IOCON_INDEX_PIO0_15       (10)
#define    IOCON_INDEX_PIO0_1        (11)
#define    IOCON_INDEX_PIO0_9        (13)
#define    IOCON_INDEX_PIO0_8        (14)
#define    IOCON_INDEX_PIO0_7        (15)
#define    IOCON_INDEX_PIO0_6        (16)
#define    IOCON_INDEX_PIO0_0        (17)
#define    IOCON_INDEX_PIO0_14       (18)


/*!
 * @}
 */ /* end of group IOCON_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- MRT Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup MRT_Peripheral_Access_Layer MRT Peripheral Access Layer
 * @{
 */

/** MRT - Register Layout Typedef */
typedef struct {
  struct {                                         /* offset: 0x0, array step: 0x10 */
    __IO uint32_t INTVAL;                            /**< MRT Time interval value register. This value is loaded into the TIMER register., array offset: 0x0, array step: 0x10 */
    __I  uint32_t TIMER;                             /**< MRT Timer register. This register reads the value of the down-counter., array offset: 0x4, array step: 0x10 */
    __IO uint32_t CTRL;                              /**< MRT Control register. This register controls the MRT modes., array offset: 0x8, array step: 0x10 */
    __IO uint32_t STAT;                              /**< MRT Status register., array offset: 0xC, array step: 0x10 */
  } CHANNEL[4];
       uint8_t RESERVED_0[176];
  __I  uint32_t MODCFG;                            /**< Module Configuration register. This register provides information about this particular MRT instance., offset: 0xF0 */
  __I  uint32_t IDLE_CH;                           /**< Idle channel register. This register returns the number of the first idle channel., offset: 0xF4 */
  __IO uint32_t IRQ_FLAG;                          /**< Global interrupt flag register, offset: 0xF8 */
} MRT_Type;

/* ----------------------------------------------------------------------------
   -- MRT Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup MRT_Register_Masks MRT Register Masks
 * @{
 */

/*! @name CHANNEL_INTVAL - MRT Time interval value register. This value is loaded into the TIMER register. */
/*! @{ */
#define MRT_CHANNEL_INTVAL_IVALUE_MASK           (0x7FFFFFFFU)
#define MRT_CHANNEL_INTVAL_IVALUE_SHIFT          (0U)
/*! IVALUE - Time interval load value. This value is loaded into the TIMERn register and the MRT
 *    channel n starts counting down from IVALUE -1. If the timer is idle, writing a non-zero value to
 *    this bit field starts the timer immediately. If the timer is running, writing a zero to this
 *    bit field does the following: If LOAD = 1, the timer stops immediately. If LOAD = 0, the timer
 *    stops at the end of the time interval.
 */
#define MRT_CHANNEL_INTVAL_IVALUE(x)             (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_INTVAL_IVALUE_SHIFT)) & MRT_CHANNEL_INTVAL_IVALUE_MASK)
#define MRT_CHANNEL_INTVAL_LOAD_MASK             (0x80000000U)
#define MRT_CHANNEL_INTVAL_LOAD_SHIFT            (31U)
/*! LOAD - Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register.
 *    This bit is write-only. Reading this bit always returns 0.
 *  0b0..No force load. The load from the INTVALn register to the TIMERn register is processed at the end of the
 *       time interval if the repeat mode is selected.
 *  0b1..Force load. The INTVALn interval value IVALUE -1 is immediately loaded into the TIMERn register while TIMERn is running.
 */
#define MRT_CHANNEL_INTVAL_LOAD(x)               (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_INTVAL_LOAD_SHIFT)) & MRT_CHANNEL_INTVAL_LOAD_MASK)
/*! @} */

/* The count of MRT_CHANNEL_INTVAL */
#define MRT_CHANNEL_INTVAL_COUNT                 (4U)

/*! @name CHANNEL_TIMER - MRT Timer register. This register reads the value of the down-counter. */
/*! @{ */
#define MRT_CHANNEL_TIMER_VALUE_MASK             (0x7FFFFFFFU)
#define MRT_CHANNEL_TIMER_VALUE_SHIFT            (0U)
/*! VALUE - Holds the current timer value of the down-counter. The initial value of the TIMERn
 *    register is loaded as IVALUE - 1 from the INTVALn register either at the end of the time interval
 *    or immediately in the following cases: INTVALn register is updated in the idle state. INTVALn
 *    register is updated with LOAD = 1. When the timer is in idle state, reading this bit fields
 *    returns -1 (0x00FF FFFF).
 */
#define MRT_CHANNEL_TIMER_VALUE(x)               (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_TIMER_VALUE_SHIFT)) & MRT_CHANNEL_TIMER_VALUE_MASK)
/*! @} */

/* The count of MRT_CHANNEL_TIMER */
#define MRT_CHANNEL_TIMER_COUNT                  (4U)

/*! @name CHANNEL_CTRL - MRT Control register. This register controls the MRT modes. */
/*! @{ */
#define MRT_CHANNEL_CTRL_INTEN_MASK              (0x1U)
#define MRT_CHANNEL_CTRL_INTEN_SHIFT             (0U)
/*! INTEN - Enable the TIMERn interrupt.
 *  0b0..Disabled. TIMERn interrupt is disabled.
 *  0b1..Enabled. TIMERn interrupt is enabled.
 */
#define MRT_CHANNEL_CTRL_INTEN(x)                (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_CTRL_INTEN_SHIFT)) & MRT_CHANNEL_CTRL_INTEN_MASK)
#define MRT_CHANNEL_CTRL_MODE_MASK               (0x6U)
#define MRT_CHANNEL_CTRL_MODE_SHIFT              (1U)
/*! MODE - Selects timer mode.
 *  0b00..Repeat interrupt mode.
 *  0b01..One-shot interrupt mode.
 *  0b10..One-shot stall mode.
 *  0b11..Reserved.
 */
#define MRT_CHANNEL_CTRL_MODE(x)                 (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_CTRL_MODE_SHIFT)) & MRT_CHANNEL_CTRL_MODE_MASK)
/*! @} */

/* The count of MRT_CHANNEL_CTRL */
#define MRT_CHANNEL_CTRL_COUNT                   (4U)

/*! @name CHANNEL_STAT - MRT Status register. */
/*! @{ */
#define MRT_CHANNEL_STAT_INTFLAG_MASK            (0x1U)
#define MRT_CHANNEL_STAT_INTFLAG_SHIFT           (0U)
/*! INTFLAG - Monitors the interrupt flag.
 *  0b0..No pending interrupt. Writing a zero is equivalent to no operation.
 *  0b1..Pending interrupt. The interrupt is pending because TIMERn has reached the end of the time interval. If
 *       the INTEN bit in the CONTROLn is also set to 1, the interrupt for timer channel n and the global interrupt
 *       are raised. Writing a 1 to this bit clears the interrupt request.
 */
#define MRT_CHANNEL_STAT_INTFLAG(x)              (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_STAT_INTFLAG_SHIFT)) & MRT_CHANNEL_STAT_INTFLAG_MASK)
#define MRT_CHANNEL_STAT_RUN_MASK                (0x2U)
#define MRT_CHANNEL_STAT_RUN_SHIFT               (1U)
/*! RUN - Indicates the state of TIMERn. This bit is read-only.
 *  0b0..Idle state. TIMERn is stopped.
 *  0b1..Running. TIMERn is running.
 */
#define MRT_CHANNEL_STAT_RUN(x)                  (((uint32_t)(((uint32_t)(x)) << MRT_CHANNEL_STAT_RUN_SHIFT)) & MRT_CHANNEL_STAT_RUN_MASK)
/*! @} */

/* The count of MRT_CHANNEL_STAT */
#define MRT_CHANNEL_STAT_COUNT                   (4U)

/*! @name MODCFG - Module Configuration register. This register provides information about this particular MRT instance. */
/*! @{ */
#define MRT_MODCFG_NOC_MASK                      (0xFU)
#define MRT_MODCFG_NOC_SHIFT                     (0U)
/*! NOC - Identifies the number of channels in this MRT.(4 channels on this device.)
 */
#define MRT_MODCFG_NOC(x)                        (((uint32_t)(((uint32_t)(x)) << MRT_MODCFG_NOC_SHIFT)) & MRT_MODCFG_NOC_MASK)
#define MRT_MODCFG_NOB_MASK                      (0x1F0U)
#define MRT_MODCFG_NOB_SHIFT                     (4U)
/*! NOB - Identifies the number of timer bits in this MRT. (31 bits wide on this device.)
 */
#define MRT_MODCFG_NOB(x)                        (((uint32_t)(((uint32_t)(x)) << MRT_MODCFG_NOB_SHIFT)) & MRT_MODCFG_NOB_MASK)
/*! @} */

/*! @name IDLE_CH - Idle channel register. This register returns the number of the first idle channel. */
/*! @{ */
#define MRT_IDLE_CH_CHAN_MASK                    (0xF0U)
#define MRT_IDLE_CH_CHAN_SHIFT                   (4U)
/*! CHAN - Idle channel. Reading the CHAN bits, returns the lowest idle timer channel. The number is
 *    positioned such that it can be used as an offset from the MRT base address in order to access
 *    the registers for the allocated channel. If all timer channels are running, CHAN = 0xF. See
 *    text above for more details.
 */
#define MRT_IDLE_CH_CHAN(x)                      (((uint32_t)(((uint32_t)(x)) << MRT_IDLE_CH_CHAN_SHIFT)) & MRT_IDLE_CH_CHAN_MASK)
/*! @} */

/*! @name IRQ_FLAG - Global interrupt flag register */
/*! @{ */
#define MRT_IRQ_FLAG_GFLAG0_MASK                 (0x1U)
#define MRT_IRQ_FLAG_GFLAG0_SHIFT                (0U)
/*! GFLAG0 - Monitors the interrupt flag of TIMER0.
 *  0b0..No pending interrupt. Writing a zero is equivalent to no operation.
 *  0b1..Pending interrupt. The interrupt is pending because TIMER0 has reached the end of the time interval. If
 *       the INTEN bit in the CONTROL0 register is also set to 1, the interrupt for timer channel 0 and the global
 *       interrupt are raised. Writing a 1 to this bit clears the interrupt request.
 */
#define MRT_IRQ_FLAG_GFLAG0(x)                   (((uint32_t)(((uint32_t)(x)) << MRT_IRQ_FLAG_GFLAG0_SHIFT)) & MRT_IRQ_FLAG_GFLAG0_MASK)
#define MRT_IRQ_FLAG_GFLAG1_MASK                 (0x2U)
#define MRT_IRQ_FLAG_GFLAG1_SHIFT                (1U)
/*! GFLAG1 - Monitors the interrupt flag of TIMER1. See description of channel 0.
 */
#define MRT_IRQ_FLAG_GFLAG1(x)                   (((uint32_t)(((uint32_t)(x)) << MRT_IRQ_FLAG_GFLAG1_SHIFT)) & MRT_IRQ_FLAG_GFLAG1_MASK)
#define MRT_IRQ_FLAG_GFLAG2_MASK                 (0x4U)
#define MRT_IRQ_FLAG_GFLAG2_SHIFT                (2U)
/*! GFLAG2 - Monitors the interrupt flag of TIMER2. See description of channel 0.
 */
#define MRT_IRQ_FLAG_GFLAG2(x)                   (((uint32_t)(((uint32_t)(x)) << MRT_IRQ_FLAG_GFLAG2_SHIFT)) & MRT_IRQ_FLAG_GFLAG2_MASK)
#define MRT_IRQ_FLAG_GFLAG3_MASK                 (0x8U)
#define MRT_IRQ_FLAG_GFLAG3_SHIFT                (3U)
/*! GFLAG3 - Monitors the interrupt flag of TIMER3. See description of channel 0.
 */
#define MRT_IRQ_FLAG_GFLAG3(x)                   (((uint32_t)(((uint32_t)(x)) << MRT_IRQ_FLAG_GFLAG3_SHIFT)) & MRT_IRQ_FLAG_GFLAG3_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group MRT_Register_Masks */


/* MRT - Peripheral instance base addresses */
/** Peripheral MRT0 base address */
#define MRT0_BASE                                (0x40004000u)
/** Peripheral MRT0 base pointer */
#define MRT0                                     ((MRT_Type *)MRT0_BASE)
/** Array initializer of MRT peripheral base addresses */
#define MRT_BASE_ADDRS                           { MRT0_BASE }
/** Array initializer of MRT peripheral base pointers */
#define MRT_BASE_PTRS                            { MRT0 }
/** Interrupt vectors for the MRT peripheral type */
#define MRT_IRQS                                 { MRT0_IRQn }

/*!
 * @}
 */ /* end of group MRT_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- MTB Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup MTB_Peripheral_Access_Layer MTB Peripheral Access Layer
 * @{
 */

/** MTB - Register Layout Typedef */
typedef struct {
  __IO uint32_t POSITION;                          /**< POSITION Register, offset: 0x0 */
  __IO uint32_t MASTER;                            /**< MASTER Register, offset: 0x4 */
  __IO uint32_t FLOW;                              /**< FLOW Register, offset: 0x8 */
  __I  uint32_t BASE;                              /**< Indicates where the SRAM is located in the processor memory map. This register is provided to enable auto discovery of the MTB SRAM location, by a debug agent., offset: 0xC */
} MTB_Type;

/* ----------------------------------------------------------------------------
   -- MTB Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup MTB_Register_Masks MTB Register Masks
 * @{
 */

/*! @name POSITION - POSITION Register */
/*! @{ */
#define MTB_POSITION_WRAP_MASK                   (0x4U)
#define MTB_POSITION_WRAP_SHIFT                  (2U)
/*! WRAP - This bit is set to 1 automatically when the POINTER value wraps as determined by the
 *    MASTER.MASK field in the MASTER Trace Control Register.
 */
#define MTB_POSITION_WRAP(x)                     (((uint32_t)(((uint32_t)(x)) << MTB_POSITION_WRAP_SHIFT)) & MTB_POSITION_WRAP_MASK)
#define MTB_POSITION_POINTER_MASK                (0xFFFFFFF8U)
#define MTB_POSITION_POINTER_SHIFT               (3U)
/*! POINTER - Trace packet location pointer. Because a packet consists of two words, the POINTER
 *    field is the location of the first word of a packet. This field contains bits [31:3] of the
 *    address, in the SRAM, where the next trace packet will be written. The field points to an unused
 *    location and is automatically incremented. A debug agent can calculate the system address, on
 *    the AHB-Lite bus, of the SRAM location pointed to by the POSITION register using the following
 *    equation: system address = BASE + ((P + (2AWIDTH - (BASE MOD 2AWIDTH))) MOD 2AWIDTH). Where P =
 *    POSITION AND 0xFFFF_FFF8. Where BASE is the BASE register value
 */
#define MTB_POSITION_POINTER(x)                  (((uint32_t)(((uint32_t)(x)) << MTB_POSITION_POINTER_SHIFT)) & MTB_POSITION_POINTER_MASK)
/*! @} */

/*! @name MASTER - MASTER Register */
/*! @{ */
#define MTB_MASTER_MASK_MASK                     (0x1FU)
#define MTB_MASTER_MASK_SHIFT                    (0U)
/*! MASK - This value determines the maximum size of the trace buffer in SRAM. It specifies the
 *    most-significant bit of the POSITION.POINTER field that can be updated by automatic increment. If
 *    the trace tries to advance past this power of two, the POSITION.WRAP bit is set to 1, the
 *    POSITION.POINTER[MASK:0] bits are set to zero, and the POSITION.POINTER[AWIDTH-4:MASK+1] bits
 *    remain unchanged. This field causes the trace packet information to be stored in a circular buffer
 *    of size 2(MASK+4) bytes, that can be positioned in memory at multiples of this size. Valid
 *    values of this field are zero to AWIDTH-4. Values greater than the maximum have the same effect
 *    as the maximum.
 */
#define MTB_MASTER_MASK(x)                       (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_MASK_SHIFT)) & MTB_MASTER_MASK_MASK)
#define MTB_MASTER_TSTARTEN_MASK                 (0x20U)
#define MTB_MASTER_TSTARTEN_SHIFT                (5U)
/*! TSTARTEN - Trace start input enable. If this bit is 1 and the TSTART signal is HIGH, then the EN
 *    bit is set to 1. Tracing continues until a stop condition occurs.
 */
#define MTB_MASTER_TSTARTEN(x)                   (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_TSTARTEN_SHIFT)) & MTB_MASTER_TSTARTEN_MASK)
#define MTB_MASTER_TSTOPEN_MASK                  (0x40U)
#define MTB_MASTER_TSTOPEN_SHIFT                 (6U)
/*! TSTOPEN - Trace stop input enable. If this bit is 1 and the TSTOP signal is HIGH, then the EN
 *    bit is set to 0. If a trace packet is being written to memory, the write is completed before
 *    tracing is stopped.
 */
#define MTB_MASTER_TSTOPEN(x)                    (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_TSTOPEN_SHIFT)) & MTB_MASTER_TSTOPEN_MASK)
#define MTB_MASTER_SFRWPRIV_MASK                 (0x80U)
#define MTB_MASTER_SFRWPRIV_SHIFT                (7U)
/*! SFRWPRIV - Special Function Register Write Privilege bit. If this bit is 0, then User or
 *    Privileged AHB-Lite read and write accesses to the Special Function Registers are permitted. If this
 *    bit is 1, then only Privileged write accesses are permitted and User write accesses are
 *    ignored. The HPROT[1] signal determines if an access is User or Privileged.
 */
#define MTB_MASTER_SFRWPRIV(x)                   (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_SFRWPRIV_SHIFT)) & MTB_MASTER_SFRWPRIV_MASK)
#define MTB_MASTER_RAMPRIV_MASK                  (0x100U)
#define MTB_MASTER_RAMPRIV_SHIFT                 (8U)
/*! RAMPRIV - SRAM Privilege bit. If this bit is 0, then User or Privileged AHB-Lite read and write
 *    accesses to the SRAM are permitted. If this bit is 1, then only Privileged AHB-Lite read and
 *    write accesses to the SRAM are permitted and User accesses are RAZ/WI. The HPROT[1] signal
 *    determines if an access is User or Privileged.
 */
#define MTB_MASTER_RAMPRIV(x)                    (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_RAMPRIV_SHIFT)) & MTB_MASTER_RAMPRIV_MASK)
#define MTB_MASTER_HALTREQ_MASK                  (0x200U)
#define MTB_MASTER_HALTREQ_SHIFT                 (9U)
/*! HALTREQ - Halt request bit. This bit is connected to the halt request signal of the trace logic,
 *    EDBGRQ. When HALTREQ is set to 1, EDBGRQ is asserted if DBGEN is also HIGH. The HALTREQ bit
 *    can be automatically set to 1 using the FLOW.WATERMARK field.
 */
#define MTB_MASTER_HALTREQ(x)                    (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_HALTREQ_SHIFT)) & MTB_MASTER_HALTREQ_MASK)
#define MTB_MASTER_EN_MASK                       (0x80000000U)
#define MTB_MASTER_EN_SHIFT                      (31U)
/*! EN - Main trace enable bit. When this bit is 1 trace data is written into the SRAM memory
 *    location addressed by POSITION.POINTER. The POSITION.POINTER value auto increments after the trace
 *    data packet is written. The EN bit can be automatically set to 0 using the FLOW.WATERMARK field
 *    and the FLOW.AUTOSTOP bit. The EN bit is automatically set to 1 if the TSTARTEN bit is 1 and
 *    the TSTART signal is HIGH. The EN bit is automatically set to 0 if TSTOPEN bit is 1 and the
 *    TSTOP signal is HIGH.
 */
#define MTB_MASTER_EN(x)                         (((uint32_t)(((uint32_t)(x)) << MTB_MASTER_EN_SHIFT)) & MTB_MASTER_EN_MASK)
/*! @} */

/*! @name FLOW - FLOW Register */
/*! @{ */
#define MTB_FLOW_AUTOSTOP_MASK                   (0x1U)
#define MTB_FLOW_AUTOSTOP_SHIFT                  (0U)
/*! AUTOSTOP - If this bit is 1 and WATERMARK is equal to POSITION.POINTER, then the MASTER.EN bit
 *    is automatically set to 0. This stops tracing.
 */
#define MTB_FLOW_AUTOSTOP(x)                     (((uint32_t)(((uint32_t)(x)) << MTB_FLOW_AUTOSTOP_SHIFT)) & MTB_FLOW_AUTOSTOP_MASK)
#define MTB_FLOW_AUTOHALT_MASK                   (0x2U)
#define MTB_FLOW_AUTOHALT_SHIFT                  (1U)
/*! AUTOHALT - If this bit is 1 and WATERMARK is equal to POSITION.POINTER, then the MASTER.HALTREQ
 *    bit is automatically set to 1. If the DBGEN signal is HIGH, the MTB asserts this halt request
 *    to the Cortex-M0+ processor by asserting the EDBGRQ signal.
 */
#define MTB_FLOW_AUTOHALT(x)                     (((uint32_t)(((uint32_t)(x)) << MTB_FLOW_AUTOHALT_SHIFT)) & MTB_FLOW_AUTOHALT_MASK)
#define MTB_FLOW_WATERMARK_MASK                  (0xFFFFFFF8U)
#define MTB_FLOW_WATERMARK_SHIFT                 (3U)
/*! WATERMARK - WATERMARK value. This field contains an address in the same format as the
 *    POSITION.POINTER field. When the POSITION.POINTER matches the WATERMARK field value, actions defined by
 *    the AUTOHALT and AUTOSTOP bits are performed.
 */
#define MTB_FLOW_WATERMARK(x)                    (((uint32_t)(((uint32_t)(x)) << MTB_FLOW_WATERMARK_SHIFT)) & MTB_FLOW_WATERMARK_MASK)
/*! @} */

/*! @name BASE - Indicates where the SRAM is located in the processor memory map. This register is provided to enable auto discovery of the MTB SRAM location, by a debug agent. */
/*! @{ */
#define MTB_BASE_BASE_MASK                       (0xFFFFFFFFU)
#define MTB_BASE_BASE_SHIFT                      (0U)
/*! BASE - The value provided is the value of the SRAMBASEADDR[31:0] signal.
 */
#define MTB_BASE_BASE(x)                         (((uint32_t)(((uint32_t)(x)) << MTB_BASE_BASE_SHIFT)) & MTB_BASE_BASE_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group MTB_Register_Masks */


/* MTB - Peripheral instance base addresses */
/** Peripheral MTB base address */
#define MTB_BASE                                 (0x14000000u)
/** Peripheral MTB base pointer */
#define MTB                                      ((MTB_Type *)MTB_BASE)
/** Array initializer of MTB peripheral base addresses */
#define MTB_BASE_ADDRS                           { MTB_BASE }
/** Array initializer of MTB peripheral base pointers */
#define MTB_BASE_PTRS                            { MTB }

/*!
 * @}
 */ /* end of group MTB_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- PINT Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup PINT_Peripheral_Access_Layer PINT Peripheral Access Layer
 * @{
 */

/** PINT - Register Layout Typedef */
typedef struct {
  __IO uint32_t ISEL;                              /**< Pin Interrupt Mode register, offset: 0x0 */
  __IO uint32_t IENR;                              /**< Pin interrupt level or rising edge interrupt enable register, offset: 0x4 */
  __O  uint32_t SIENR;                             /**< Pin interrupt level or rising edge interrupt set register, offset: 0x8 */
  __O  uint32_t CIENR;                             /**< Pin interrupt level (rising edge interrupt) clear register, offset: 0xC */
  __IO uint32_t IENF;                              /**< Pin interrupt active level or falling edge interrupt enable register, offset: 0x10 */
  __O  uint32_t SIENF;                             /**< Pin interrupt active level or falling edge interrupt set register, offset: 0x14 */
  __O  uint32_t CIENF;                             /**< Pin interrupt active level or falling edge interrupt clear register, offset: 0x18 */
  __IO uint32_t RISE;                              /**< Pin interrupt rising edge register, offset: 0x1C */
  __IO uint32_t FALL;                              /**< Pin interrupt falling edge register, offset: 0x20 */
  __IO uint32_t IST;                               /**< Pin interrupt status register, offset: 0x24 */
  __IO uint32_t PMCTRL;                            /**< Pattern match interrupt control register, offset: 0x28 */
  __IO uint32_t PMSRC;                             /**< Pattern match interrupt bit-slice source register, offset: 0x2C */
  __IO uint32_t PMCFG;                             /**< Pattern match interrupt bit slice configuration register, offset: 0x30 */
} PINT_Type;

/* ----------------------------------------------------------------------------
   -- PINT Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup PINT_Register_Masks PINT Register Masks
 * @{
 */

/*! @name ISEL - Pin Interrupt Mode register */
/*! @{ */
#define PINT_ISEL_PMODE_MASK                     (0xFFU)
#define PINT_ISEL_PMODE_SHIFT                    (0U)
/*! PMODE - Selects the interrupt mode for each pin interrupt. Bit n configures the pin interrupt
 *    selected in PINTSELn. 0 = Edge sensitive 1 = Level sensitive
 */
#define PINT_ISEL_PMODE(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_ISEL_PMODE_SHIFT)) & PINT_ISEL_PMODE_MASK)
/*! @} */

/*! @name IENR - Pin interrupt level or rising edge interrupt enable register */
/*! @{ */
#define PINT_IENR_ENRL_MASK                      (0xFFU)
#define PINT_IENR_ENRL_SHIFT                     (0U)
/*! ENRL - Enables the rising edge or level interrupt for each pin interrupt. Bit n configures the
 *    pin interrupt selected in PINTSELn. 0 = Disable rising edge or level interrupt. 1 = Enable
 *    rising edge or level interrupt.
 */
#define PINT_IENR_ENRL(x)                        (((uint32_t)(((uint32_t)(x)) << PINT_IENR_ENRL_SHIFT)) & PINT_IENR_ENRL_MASK)
/*! @} */

/*! @name SIENR - Pin interrupt level or rising edge interrupt set register */
/*! @{ */
#define PINT_SIENR_SETENRL_MASK                  (0xFFU)
#define PINT_SIENR_SETENRL_SHIFT                 (0U)
/*! SETENRL - Ones written to this address set bits in the IENR, thus enabling interrupts. Bit n
 *    sets bit n in the IENR register. 0 = No operation. 1 = Enable rising edge or level interrupt.
 */
#define PINT_SIENR_SETENRL(x)                    (((uint32_t)(((uint32_t)(x)) << PINT_SIENR_SETENRL_SHIFT)) & PINT_SIENR_SETENRL_MASK)
/*! @} */

/*! @name CIENR - Pin interrupt level (rising edge interrupt) clear register */
/*! @{ */
#define PINT_CIENR_CENRL_MASK                    (0xFFU)
#define PINT_CIENR_CENRL_SHIFT                   (0U)
/*! CENRL - Ones written to this address clear bits in the IENR, thus disabling the interrupts. Bit
 *    n clears bit n in the IENR register. 0 = No operation. 1 = Disable rising edge or level
 *    interrupt.
 */
#define PINT_CIENR_CENRL(x)                      (((uint32_t)(((uint32_t)(x)) << PINT_CIENR_CENRL_SHIFT)) & PINT_CIENR_CENRL_MASK)
/*! @} */

/*! @name IENF - Pin interrupt active level or falling edge interrupt enable register */
/*! @{ */
#define PINT_IENF_ENAF_MASK                      (0xFFU)
#define PINT_IENF_ENAF_SHIFT                     (0U)
/*! ENAF - Enables the falling edge or configures the active level interrupt for each pin interrupt.
 *    Bit n configures the pin interrupt selected in PINTSELn. 0 = Disable falling edge interrupt
 *    or set active interrupt level LOW. 1 = Enable falling edge interrupt enabled or set active
 *    interrupt level HIGH.
 */
#define PINT_IENF_ENAF(x)                        (((uint32_t)(((uint32_t)(x)) << PINT_IENF_ENAF_SHIFT)) & PINT_IENF_ENAF_MASK)
/*! @} */

/*! @name SIENF - Pin interrupt active level or falling edge interrupt set register */
/*! @{ */
#define PINT_SIENF_SETENAF_MASK                  (0xFFU)
#define PINT_SIENF_SETENAF_SHIFT                 (0U)
/*! SETENAF - Ones written to this address set bits in the IENF, thus enabling interrupts. Bit n
 *    sets bit n in the IENF register. 0 = No operation. 1 = Select HIGH-active interrupt or enable
 *    falling edge interrupt.
 */
#define PINT_SIENF_SETENAF(x)                    (((uint32_t)(((uint32_t)(x)) << PINT_SIENF_SETENAF_SHIFT)) & PINT_SIENF_SETENAF_MASK)
/*! @} */

/*! @name CIENF - Pin interrupt active level or falling edge interrupt clear register */
/*! @{ */
#define PINT_CIENF_CENAF_MASK                    (0xFFU)
#define PINT_CIENF_CENAF_SHIFT                   (0U)
/*! CENAF - Ones written to this address clears bits in the IENF, thus disabling interrupts. Bit n
 *    clears bit n in the IENF register. 0 = No operation. 1 = LOW-active interrupt selected or
 *    falling edge interrupt disabled.
 */
#define PINT_CIENF_CENAF(x)                      (((uint32_t)(((uint32_t)(x)) << PINT_CIENF_CENAF_SHIFT)) & PINT_CIENF_CENAF_MASK)
/*! @} */

/*! @name RISE - Pin interrupt rising edge register */
/*! @{ */
#define PINT_RISE_RDET_MASK                      (0xFFU)
#define PINT_RISE_RDET_SHIFT                     (0U)
/*! RDET - Rising edge detect. Bit n detects the rising edge of the pin selected in PINTSELn. Read
 *    0: No rising edge has been detected on this pin since Reset or the last time a one was written
 *    to this bit. Write 0: no operation. Read 1: a rising edge has been detected since Reset or the
 *    last time a one was written to this bit. Write 1: clear rising edge detection for this pin.
 */
#define PINT_RISE_RDET(x)                        (((uint32_t)(((uint32_t)(x)) << PINT_RISE_RDET_SHIFT)) & PINT_RISE_RDET_MASK)
/*! @} */

/*! @name FALL - Pin interrupt falling edge register */
/*! @{ */
#define PINT_FALL_FDET_MASK                      (0xFFU)
#define PINT_FALL_FDET_SHIFT                     (0U)
/*! FDET - Falling edge detect. Bit n detects the falling edge of the pin selected in PINTSELn. Read
 *    0: No falling edge has been detected on this pin since Reset or the last time a one was
 *    written to this bit. Write 0: no operation. Read 1: a falling edge has been detected since Reset or
 *    the last time a one was written to this bit. Write 1: clear falling edge detection for this
 *    pin.
 */
#define PINT_FALL_FDET(x)                        (((uint32_t)(((uint32_t)(x)) << PINT_FALL_FDET_SHIFT)) & PINT_FALL_FDET_MASK)
/*! @} */

/*! @name IST - Pin interrupt status register */
/*! @{ */
#define PINT_IST_PSTAT_MASK                      (0xFFU)
#define PINT_IST_PSTAT_SHIFT                     (0U)
/*! PSTAT - Pin interrupt status. Bit n returns the status, clears the edge interrupt, or inverts
 *    the active level of the pin selected in PINTSELn. Read 0: interrupt is not being requested for
 *    this interrupt pin. Write 0: no operation. Read 1: interrupt is being requested for this
 *    interrupt pin. Write 1 (edge-sensitive): clear rising- and falling-edge detection for this pin.
 *    Write 1 (level-sensitive): switch the active level for this pin (in the IENF register).
 */
#define PINT_IST_PSTAT(x)                        (((uint32_t)(((uint32_t)(x)) << PINT_IST_PSTAT_SHIFT)) & PINT_IST_PSTAT_MASK)
/*! @} */

/*! @name PMCTRL - Pattern match interrupt control register */
/*! @{ */
#define PINT_PMCTRL_SEL_PMATCH_MASK              (0x1U)
#define PINT_PMCTRL_SEL_PMATCH_SHIFT             (0U)
/*! SEL_PMATCH - Specifies whether the 8 pin interrupts are controlled by the pin interrupt function or by the pattern match function.
 *  0b0..Pin interrupt. Interrupts are driven in response to the standard pin interrupt function.
 *  0b1..Pattern match. Interrupts are driven in response to pattern matches.
 */
#define PINT_PMCTRL_SEL_PMATCH(x)                (((uint32_t)(((uint32_t)(x)) << PINT_PMCTRL_SEL_PMATCH_SHIFT)) & PINT_PMCTRL_SEL_PMATCH_MASK)
#define PINT_PMCTRL_ENA_RXEV_MASK                (0x2U)
#define PINT_PMCTRL_ENA_RXEV_SHIFT               (1U)
/*! ENA_RXEV - Enables the RXEV output to the CPU and/or to a GPIO output when the specified boolean expression evaluates to true.
 *  0b0..Disabled. RXEV output to the CPU is disabled.
 *  0b1..Enabled. RXEV output to the CPU is enabled.
 */
#define PINT_PMCTRL_ENA_RXEV(x)                  (((uint32_t)(((uint32_t)(x)) << PINT_PMCTRL_ENA_RXEV_SHIFT)) & PINT_PMCTRL_ENA_RXEV_MASK)
#define PINT_PMCTRL_PMAT_MASK                    (0xFF000000U)
#define PINT_PMCTRL_PMAT_SHIFT                   (24U)
/*! PMAT - This field displays the current state of pattern matches. A 1 in any bit of this field
 *    indicates that the corresponding product term is matched by the current state of the appropriate
 *    inputs.
 */
#define PINT_PMCTRL_PMAT(x)                      (((uint32_t)(((uint32_t)(x)) << PINT_PMCTRL_PMAT_SHIFT)) & PINT_PMCTRL_PMAT_MASK)
/*! @} */

/*! @name PMSRC - Pattern match interrupt bit-slice source register */
/*! @{ */
#define PINT_PMSRC_SRC0_MASK                     (0x700U)
#define PINT_PMSRC_SRC0_SHIFT                    (8U)
/*! SRC0 - Selects the input source for bit slice 0
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 0.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 0.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 0.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 0.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 0.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 0.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 0.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 0.
 */
#define PINT_PMSRC_SRC0(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC0_SHIFT)) & PINT_PMSRC_SRC0_MASK)
#define PINT_PMSRC_SRC1_MASK                     (0x3800U)
#define PINT_PMSRC_SRC1_SHIFT                    (11U)
/*! SRC1 - Selects the input source for bit slice 1
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 1.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 1.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 1.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 1.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 1.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 1.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 1.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 1.
 */
#define PINT_PMSRC_SRC1(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC1_SHIFT)) & PINT_PMSRC_SRC1_MASK)
#define PINT_PMSRC_SRC2_MASK                     (0x1C000U)
#define PINT_PMSRC_SRC2_SHIFT                    (14U)
/*! SRC2 - Selects the input source for bit slice 2
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 2.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 2.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 2.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 2.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 2.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 2.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 2.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 2.
 */
#define PINT_PMSRC_SRC2(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC2_SHIFT)) & PINT_PMSRC_SRC2_MASK)
#define PINT_PMSRC_SRC3_MASK                     (0xE0000U)
#define PINT_PMSRC_SRC3_SHIFT                    (17U)
/*! SRC3 - Selects the input source for bit slice 3
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 3.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 3.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 3.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 3.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 3.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 3.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 3.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 3.
 */
#define PINT_PMSRC_SRC3(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC3_SHIFT)) & PINT_PMSRC_SRC3_MASK)
#define PINT_PMSRC_SRC4_MASK                     (0x700000U)
#define PINT_PMSRC_SRC4_SHIFT                    (20U)
/*! SRC4 - Selects the input source for bit slice 4
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 4.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 4.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 4.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 4.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 4.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 4.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 4.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 4.
 */
#define PINT_PMSRC_SRC4(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC4_SHIFT)) & PINT_PMSRC_SRC4_MASK)
#define PINT_PMSRC_SRC5_MASK                     (0x3800000U)
#define PINT_PMSRC_SRC5_SHIFT                    (23U)
/*! SRC5 - Selects the input source for bit slice 5
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 5.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 5.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 5.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 5.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 5.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 5.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 5.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 5.
 */
#define PINT_PMSRC_SRC5(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC5_SHIFT)) & PINT_PMSRC_SRC5_MASK)
#define PINT_PMSRC_SRC6_MASK                     (0x1C000000U)
#define PINT_PMSRC_SRC6_SHIFT                    (26U)
/*! SRC6 - Selects the input source for bit slice 6
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 6.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 6.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 6.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 6.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 6.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 6.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 6.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 6.
 */
#define PINT_PMSRC_SRC6(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC6_SHIFT)) & PINT_PMSRC_SRC6_MASK)
#define PINT_PMSRC_SRC7_MASK                     (0xE0000000U)
#define PINT_PMSRC_SRC7_SHIFT                    (29U)
/*! SRC7 - Selects the input source for bit slice 7
 *  0b000..Input 0. Selects the pin selected in the PINTSEL0 register as the source to bit slice 7.
 *  0b001..Input 1. Selects the pin selected in the PINTSEL1 register as the source to bit slice 7.
 *  0b010..Input 2. Selects the pin selected in the PINTSEL2 register as the source to bit slice 7.
 *  0b011..Input 3. Selects the pin selected in the PINTSEL3 register as the source to bit slice 7.
 *  0b100..Input 4. Selects the pin selected in the PINTSEL4 register as the source to bit slice 7.
 *  0b101..Input 5. Selects the pin selected in the PINTSEL5 register as the source to bit slice 7.
 *  0b110..Input 6. Selects the pin selected in the PINTSEL6 register as the source to bit slice 7.
 *  0b111..Input 7. Selects the pin selected in the PINTSEL7 register as the source to bit slice 7.
 */
#define PINT_PMSRC_SRC7(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMSRC_SRC7_SHIFT)) & PINT_PMSRC_SRC7_MASK)
/*! @} */

/*! @name PMCFG - Pattern match interrupt bit slice configuration register */
/*! @{ */
#define PINT_PMCFG_PROD_ENDPTS0_MASK             (0x1U)
#define PINT_PMCFG_PROD_ENDPTS0_SHIFT            (0U)
/*! PROD_ENDPTS0 - Determines whether slice 0 is an endpoint.
 *  0b0..No effect. Slice 0 is not an endpoint.
 *  0b1..endpoint. Slice 0 is the endpoint of a product term (minterm). Pin interrupt 0 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS0(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS0_SHIFT)) & PINT_PMCFG_PROD_ENDPTS0_MASK)
#define PINT_PMCFG_PROD_ENDPTS1_MASK             (0x2U)
#define PINT_PMCFG_PROD_ENDPTS1_SHIFT            (1U)
/*! PROD_ENDPTS1 - Determines whether slice 1 is an endpoint.
 *  0b0..No effect. Slice 1 is not an endpoint.
 *  0b1..endpoint. Slice 1 is the endpoint of a product term (minterm). Pin interrupt 1 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS1(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS1_SHIFT)) & PINT_PMCFG_PROD_ENDPTS1_MASK)
#define PINT_PMCFG_PROD_ENDPTS2_MASK             (0x4U)
#define PINT_PMCFG_PROD_ENDPTS2_SHIFT            (2U)
/*! PROD_ENDPTS2 - Determines whether slice 2 is an endpoint.
 *  0b0..No effect. Slice 2 is not an endpoint.
 *  0b1..endpoint. Slice 2 is the endpoint of a product term (minterm). Pin interrupt 2 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS2(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS2_SHIFT)) & PINT_PMCFG_PROD_ENDPTS2_MASK)
#define PINT_PMCFG_PROD_ENDPTS3_MASK             (0x8U)
#define PINT_PMCFG_PROD_ENDPTS3_SHIFT            (3U)
/*! PROD_ENDPTS3 - Determines whether slice 3 is an endpoint.
 *  0b0..No effect. Slice 3 is not an endpoint.
 *  0b1..endpoint. Slice 3 is the endpoint of a product term (minterm). Pin interrupt 3 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS3(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS3_SHIFT)) & PINT_PMCFG_PROD_ENDPTS3_MASK)
#define PINT_PMCFG_PROD_ENDPTS4_MASK             (0x10U)
#define PINT_PMCFG_PROD_ENDPTS4_SHIFT            (4U)
/*! PROD_ENDPTS4 - Determines whether slice 4 is an endpoint.
 *  0b0..No effect. Slice 4 is not an endpoint.
 *  0b1..endpoint. Slice 4 is the endpoint of a product term (minterm). Pin interrupt 4 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS4(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS4_SHIFT)) & PINT_PMCFG_PROD_ENDPTS4_MASK)
#define PINT_PMCFG_PROD_ENDPTS5_MASK             (0x20U)
#define PINT_PMCFG_PROD_ENDPTS5_SHIFT            (5U)
/*! PROD_ENDPTS5 - Determines whether slice 5 is an endpoint.
 *  0b0..No effect. Slice 5 is not an endpoint.
 *  0b1..endpoint. Slice 5 is the endpoint of a product term (minterm). Pin interrupt 5 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS5(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS5_SHIFT)) & PINT_PMCFG_PROD_ENDPTS5_MASK)
#define PINT_PMCFG_PROD_ENDPTS6_MASK             (0x40U)
#define PINT_PMCFG_PROD_ENDPTS6_SHIFT            (6U)
/*! PROD_ENDPTS6 - Determines whether slice 6 is an endpoint.
 *  0b0..No effect. Slice 6 is not an endpoint.
 *  0b1..endpoint. Slice 6 is the endpoint of a product term (minterm). Pin interrupt 6 in the NVIC is raised if the minterm evaluates as true.
 */
#define PINT_PMCFG_PROD_ENDPTS6(x)               (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_PROD_ENDPTS6_SHIFT)) & PINT_PMCFG_PROD_ENDPTS6_MASK)
#define PINT_PMCFG_CFG0_MASK                     (0x700U)
#define PINT_PMCFG_CFG0_SHIFT                    (8U)
/*! CFG0 - Specifies the match contribution condition for bit slice 0.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG0(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG0_SHIFT)) & PINT_PMCFG_CFG0_MASK)
#define PINT_PMCFG_CFG1_MASK                     (0x3800U)
#define PINT_PMCFG_CFG1_SHIFT                    (11U)
/*! CFG1 - Specifies the match contribution condition for bit slice 1.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG1(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG1_SHIFT)) & PINT_PMCFG_CFG1_MASK)
#define PINT_PMCFG_CFG2_MASK                     (0x1C000U)
#define PINT_PMCFG_CFG2_SHIFT                    (14U)
/*! CFG2 - Specifies the match contribution condition for bit slice 2.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG2(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG2_SHIFT)) & PINT_PMCFG_CFG2_MASK)
#define PINT_PMCFG_CFG3_MASK                     (0xE0000U)
#define PINT_PMCFG_CFG3_SHIFT                    (17U)
/*! CFG3 - Specifies the match contribution condition for bit slice 3.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG3(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG3_SHIFT)) & PINT_PMCFG_CFG3_MASK)
#define PINT_PMCFG_CFG4_MASK                     (0x700000U)
#define PINT_PMCFG_CFG4_SHIFT                    (20U)
/*! CFG4 - Specifies the match contribution condition for bit slice 4.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG4(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG4_SHIFT)) & PINT_PMCFG_CFG4_MASK)
#define PINT_PMCFG_CFG5_MASK                     (0x3800000U)
#define PINT_PMCFG_CFG5_SHIFT                    (23U)
/*! CFG5 - Specifies the match contribution condition for bit slice 5.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG5(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG5_SHIFT)) & PINT_PMCFG_CFG5_MASK)
#define PINT_PMCFG_CFG6_MASK                     (0x1C000000U)
#define PINT_PMCFG_CFG6_SHIFT                    (26U)
/*! CFG6 - Specifies the match contribution condition for bit slice 6.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG6(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG6_SHIFT)) & PINT_PMCFG_CFG6_MASK)
#define PINT_PMCFG_CFG7_MASK                     (0xE0000000U)
#define PINT_PMCFG_CFG7_SHIFT                    (29U)
/*! CFG7 - Specifies the match contribution condition for bit slice 7.
 *  0b000..Constant HIGH. This bit slice always contributes to a product term match.
 *  0b001..Sticky rising edge. Match occurs if a rising edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b010..Sticky falling edge. Match occurs if a falling edge on the specified input has occurred since the last
 *         time the edge detection for this bit slice was cleared. This bit is only cleared when the PMCFG or the
 *         PMSRC registers are written to.
 *  0b011..Sticky rising or falling edge. Match occurs if either a rising or falling edge on the specified input
 *         has occurred since the last time the edge detection for this bit slice was cleared. This bit is only
 *         cleared when the PMCFG or the PMSRC registers are written to.
 *  0b100..High level. Match (for this bit slice) occurs when there is a high level on the input specified for this bit slice in the PMSRC register.
 *  0b101..Low level. Match occurs when there is a low level on the specified input.
 *  0b110..Constant 0. This bit slice never contributes to a match (should be used to disable any unused bit slices).
 *  0b111..Event. Non-sticky rising or falling edge. Match occurs on an event - i.e. when either a rising or
 *         falling edge is first detected on the specified input (this is a non-sticky version of value 0x3) . This bit
 *         is cleared after one clock cycle.
 */
#define PINT_PMCFG_CFG7(x)                       (((uint32_t)(((uint32_t)(x)) << PINT_PMCFG_CFG7_SHIFT)) & PINT_PMCFG_CFG7_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group PINT_Register_Masks */


/* PINT - Peripheral instance base addresses */
/** Peripheral PINT base address */
#define PINT_BASE                                (0xA0004000u)
/** Peripheral PINT base pointer */
#define PINT                                     ((PINT_Type *)PINT_BASE)
/** Array initializer of PINT peripheral base addresses */
#define PINT_BASE_ADDRS                          { PINT_BASE }
/** Array initializer of PINT peripheral base pointers */
#define PINT_BASE_PTRS                           { PINT }
/** Interrupt vectors for the PINT peripheral type */
#define PINT_IRQS                                { PIN_INT0_IRQn, PIN_INT1_IRQn, PIN_INT2_IRQn, PIN_INT3_IRQn, PIN_INT4_IRQn, PIN_INT5_IRQn, PIN_INT6_IRQn, PIN_INT7_IRQn }

/*!
 * @}
 */ /* end of group PINT_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- PMU Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup PMU_Peripheral_Access_Layer PMU Peripheral Access Layer
 * @{
 */

/** PMU - Register Layout Typedef */
typedef struct {
  __IO uint32_t PCON;                              /**< Power control register, offset: 0x0 */
  __IO uint32_t GPREG[4];                          /**< General purpose register N, array offset: 0x4, array step: 0x4 */
  __IO uint32_t DPDCTRL;                           /**< Deep power-down control register. Also includes bits for general purpose storage., offset: 0x14 */
} PMU_Type;

/* ----------------------------------------------------------------------------
   -- PMU Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup PMU_Register_Masks PMU Register Masks
 * @{
 */

/*! @name PCON - Power control register */
/*! @{ */
#define PMU_PCON_PM_MASK                         (0x7U)
#define PMU_PCON_PM_SHIFT                        (0U)
/*! PM - Power mode
 *  0b000..Default. The part is in active or sleep mode.
 *  0b001..Deep-sleep mode. ARM WFI will enter Deep-sleep mode.
 *  0b010..Power-down mode. ARM WFI will enter Power-down mode.
 *  0b011..Deep power-down mode. ARM WFI will enter Deep-power down mode (ARM Cortex-M0+ core powered-down).
 */
#define PMU_PCON_PM(x)                           (((uint32_t)(((uint32_t)(x)) << PMU_PCON_PM_SHIFT)) & PMU_PCON_PM_MASK)
#define PMU_PCON_NODPD_MASK                      (0x8U)
#define PMU_PCON_NODPD_SHIFT                     (3U)
/*! NODPD - A 1 in this bit prevents entry to Deep power-down mode when 0x3 is written to the PM
 *    field above, the SLEEPDEEP bit is set, and a WFI is executed. This bit is cleared only by
 *    power-on reset, so writing a one to this bit locks the part in a mode in which Deep power-down mode
 *    is blocked.
 */
#define PMU_PCON_NODPD(x)                        (((uint32_t)(((uint32_t)(x)) << PMU_PCON_NODPD_SHIFT)) & PMU_PCON_NODPD_MASK)
#define PMU_PCON_SLEEPFLAG_MASK                  (0x100U)
#define PMU_PCON_SLEEPFLAG_SHIFT                 (8U)
/*! SLEEPFLAG - Sleep mode flag
 *  0b0..Active mode. Read: No power-down mode entered. Part is in Active mode. Write: No effect.
 *  0b1..Low power mode. Read: Sleep, Deep-sleep or Power-down mode entered. Write: Writing a 1 clears the SLEEPFLAG bit to 0.
 */
#define PMU_PCON_SLEEPFLAG(x)                    (((uint32_t)(((uint32_t)(x)) << PMU_PCON_SLEEPFLAG_SHIFT)) & PMU_PCON_SLEEPFLAG_MASK)
#define PMU_PCON_DPDFLAG_MASK                    (0x800U)
#define PMU_PCON_DPDFLAG_SHIFT                   (11U)
/*! DPDFLAG - Deep power-down flag
 *  0b0..Not Deep power-down. Read: Deep power-down mode not entered. Write: No effect.
 *  0b1..Deep power-down. Read: Deep power-down mode entered. Write: Clear the Deep power-down flag.
 */
#define PMU_PCON_DPDFLAG(x)                      (((uint32_t)(((uint32_t)(x)) << PMU_PCON_DPDFLAG_SHIFT)) & PMU_PCON_DPDFLAG_MASK)
/*! @} */

/*! @name GPREG - General purpose register N */
/*! @{ */
#define PMU_GPREG_GPDATA_MASK                    (0xFFFFFFFFU)
#define PMU_GPREG_GPDATA_SHIFT                   (0U)
/*! GPDATA - Data retained during Deep power-down mode.
 */
#define PMU_GPREG_GPDATA(x)                      (((uint32_t)(((uint32_t)(x)) << PMU_GPREG_GPDATA_SHIFT)) & PMU_GPREG_GPDATA_MASK)
/*! @} */

/* The count of PMU_GPREG */
#define PMU_GPREG_COUNT                          (4U)

/*! @name DPDCTRL - Deep power-down control register. Also includes bits for general purpose storage. */
/*! @{ */
#define PMU_DPDCTRL_WAKEUPHYS_MASK               (0x1U)
#define PMU_DPDCTRL_WAKEUPHYS_SHIFT              (0U)
/*! WAKEUPHYS - WAKEUP pin hysteresis enable
 *  0b0..Disabled. Hysteresis for WAKEUP pin disabled.
 *  0b1..Enabled. Hysteresis for WAKEUP pin enabled.
 */
#define PMU_DPDCTRL_WAKEUPHYS(x)                 (((uint32_t)(((uint32_t)(x)) << PMU_DPDCTRL_WAKEUPHYS_SHIFT)) & PMU_DPDCTRL_WAKEUPHYS_MASK)
#define PMU_DPDCTRL_WAKEPAD_DISABLE_MASK         (0x2U)
#define PMU_DPDCTRL_WAKEPAD_DISABLE_SHIFT        (1U)
/*! WAKEPAD_DISABLE - WAKEUP pin disable. Setting this bit disables the wake-up pin, so it can be
 *    used for other purposes. Remark: Never set this bit if you intend to use a pin to wake up the
 *    part from Deep power-down mode. You can only disable the wake-up pin if the self wake-up timer
 *    is enabled and configured. Remark: Setting this bit is not necessary if Deep power-down mode is
 *    not used.
 *  0b0..Enabled. The wake-up function is enabled on pin PIO0_4.
 *  0b1..Disabled. Setting this bit disables the wake-up function on pin PIO0_4.
 */
#define PMU_DPDCTRL_WAKEPAD_DISABLE(x)           (((uint32_t)(((uint32_t)(x)) << PMU_DPDCTRL_WAKEPAD_DISABLE_SHIFT)) & PMU_DPDCTRL_WAKEPAD_DISABLE_MASK)
#define PMU_DPDCTRL_LPOSCEN_MASK                 (0x4U)
#define PMU_DPDCTRL_LPOSCEN_SHIFT                (2U)
/*! LPOSCEN - Enable the low-power oscillator for use with the 10 kHz self wake-up timer clock. You
 *    must set this bit if the CLKSEL bit in the self wake-up timer CTRL bit is set. Do not enable
 *    the low-power oscillator if the self wake-up timer is clocked by the divided IRC or the
 *    external clock input.
 *  0b0..Disabled.
 *  0b1..Enabled.
 */
#define PMU_DPDCTRL_LPOSCEN(x)                   (((uint32_t)(((uint32_t)(x)) << PMU_DPDCTRL_LPOSCEN_SHIFT)) & PMU_DPDCTRL_LPOSCEN_MASK)
#define PMU_DPDCTRL_LPOSCDPDEN_MASK              (0x8U)
#define PMU_DPDCTRL_LPOSCDPDEN_SHIFT             (3U)
/*! LPOSCDPDEN - causes the low-power oscillator to remain running during Deep power-down mode
 *    provided that bit 2 in this register is set as well. You must set this bit for the self wake-up
 *    timer to be able to wake up the part from Deep power-down mode. Remark: Do not set this bit
 *    unless you use the self wake-up timer with the low-power oscillator clock source to wake up from
 *    Deep power-down mode.
 *  0b0..Disabled.
 *  0b1..Enabled.
 */
#define PMU_DPDCTRL_LPOSCDPDEN(x)                (((uint32_t)(((uint32_t)(x)) << PMU_DPDCTRL_LPOSCDPDEN_SHIFT)) & PMU_DPDCTRL_LPOSCDPDEN_MASK)
#define PMU_DPDCTRL_GPDATA_MASK                  (0xFFFFFFF0U)
#define PMU_DPDCTRL_GPDATA_SHIFT                 (4U)
/*! GPDATA - Data retained during Deep power-down mode.
 */
#define PMU_DPDCTRL_GPDATA(x)                    (((uint32_t)(((uint32_t)(x)) << PMU_DPDCTRL_GPDATA_SHIFT)) & PMU_DPDCTRL_GPDATA_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group PMU_Register_Masks */


/* PMU - Peripheral instance base addresses */
/** Peripheral PMU base address */
#define PMU_BASE                                 (0x40020000u)
/** Peripheral PMU base pointer */
#define PMU                                      ((PMU_Type *)PMU_BASE)
/** Array initializer of PMU peripheral base addresses */
#define PMU_BASE_ADDRS                           { PMU_BASE }
/** Array initializer of PMU peripheral base pointers */
#define PMU_BASE_PTRS                            { PMU }

/*!
 * @}
 */ /* end of group PMU_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- SCT Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup SCT_Peripheral_Access_Layer SCT Peripheral Access Layer
 * @{
 */

/** SCT - Register Layout Typedef */
typedef struct {
  __IO uint32_t CONFIG;                            /**< SCT configuration register, offset: 0x0 */
  union {                                          /* offset: 0x4 */
    struct {                                         /* offset: 0x4 */
      __IO uint16_t CTRLL;                             /**< SCT_CTRLL register, offset: 0x4 */
      __IO uint16_t CTRLH;                             /**< SCT_CTRLH register, offset: 0x6 */
    } CTRL_ACCESS16BIT;
    __IO uint32_t CTRL;                              /**< SCT control register, offset: 0x4 */
  };
  union {                                          /* offset: 0x8 */
    struct {                                         /* offset: 0x8 */
      __IO uint16_t LIMITL;                            /**< SCT_LIMITL register, offset: 0x8 */
      __IO uint16_t LIMITH;                            /**< SCT_LIMITH register, offset: 0xA */
    } LIMIT_ACCESS16BIT;
    __IO uint32_t LIMIT;                             /**< SCT limit event select register, offset: 0x8 */
  };
  union {                                          /* offset: 0xC */
    struct {                                         /* offset: 0xC */
      __IO uint16_t HALTL;                             /**< SCT_HALTL register, offset: 0xC */
      __IO uint16_t HALTH;                             /**< SCT_HALTH register, offset: 0xE */
    } HALT_ACCESS16BIT;
    __IO uint32_t HALT;                              /**< SCT halt event select register, offset: 0xC */
  };
  union {                                          /* offset: 0x10 */
    struct {                                         /* offset: 0x10 */
      __IO uint16_t STOPL;                             /**< SCT_STOPL register, offset: 0x10 */
      __IO uint16_t STOPH;                             /**< SCT_STOPH register, offset: 0x12 */
    } STOP_ACCESS16BIT;
    __IO uint32_t STOP;                              /**< SCT stop event select register, offset: 0x10 */
  };
  union {                                          /* offset: 0x14 */
    struct {                                         /* offset: 0x14 */
      __IO uint16_t STARTL;                            /**< SCT_STARTL register, offset: 0x14 */
      __IO uint16_t STARTH;                            /**< SCT_STARTH register, offset: 0x16 */
    } START_ACCESS16BIT;
    __IO uint32_t START;                             /**< SCT start event select register, offset: 0x14 */
  };
       uint8_t RESERVED_0[40];
  union {                                          /* offset: 0x40 */
    struct {                                         /* offset: 0x40 */
      __IO uint16_t COUNTL;                            /**< SCT_COUNTL register, offset: 0x40 */
      __IO uint16_t COUNTH;                            /**< SCT_COUNTH register, offset: 0x42 */
    } COUNT_ACCESS16BIT;
    __IO uint32_t COUNT;                             /**< SCT counter register, offset: 0x40 */
  };
  union {                                          /* offset: 0x44 */
    struct {                                         /* offset: 0x44 */
      __IO uint16_t STATEL;                            /**< SCT_STATEL register, offset: 0x44 */
      __IO uint16_t STATEH;                            /**< SCT_STATEH register, offset: 0x46 */
    } STATE_ACCESS16BIT;
    __IO uint32_t STATE;                             /**< SCT state register, offset: 0x44 */
  };
  __I  uint32_t INPUT;                             /**< SCT input register, offset: 0x48 */
  union {                                          /* offset: 0x4C */
    struct {                                         /* offset: 0x4C */
      __IO uint16_t REGMODEL;                          /**< SCT_REGMODEL register, offset: 0x4C */
      __IO uint16_t REGMODEH;                          /**< SCT_REGMODEH register, offset: 0x4E */
    } REGMODE_ACCESS16BIT;
    __IO uint32_t REGMODE;                           /**< SCT match/capture mode register, offset: 0x4C */
  };
  __IO uint32_t OUTPUT;                            /**< SCT output register, offset: 0x50 */
  __IO uint32_t OUTPUTDIRCTRL;                     /**< SCT output counter direction control register, offset: 0x54 */
  __IO uint32_t RES;                               /**< SCT conflict resolution register, offset: 0x58 */
       uint8_t RESERVED_1[148];
  __IO uint32_t EVEN;                              /**< SCT event interrupt enable register, offset: 0xF0 */
  __IO uint32_t EVFLAG;                            /**< SCT event flag register, offset: 0xF4 */
  __IO uint32_t CONEN;                             /**< SCT conflict interrupt enable register, offset: 0xF8 */
  __IO uint32_t CONFLAG;                           /**< SCT conflict flag register, offset: 0xFC */
  union {                                          /* offset: 0x100 */
    union {                                          /* offset: 0x100, array step: 0x4 */
      struct {                                         /* offset: 0x100, array step: 0x4 */
        __IO uint16_t CAPL;                              /**< SCT_CAPL register, array offset: 0x100, array step: 0x4 */
        __IO uint16_t CAPH;                              /**< SCT_CAPH register, array offset: 0x102, array step: 0x4 */
      } CAP_ACCESS16BIT[5];
      __IO uint32_t CAP[5];                            /**< SCT capture register of capture channel, array offset: 0x100, array step: 0x4 */
    };
    union {                                          /* offset: 0x100, array step: 0x4 */
      struct {                                         /* offset: 0x100, array step: 0x4 */
        __IO uint16_t MATCHL;                            /**< SCT_MATCHL register, array offset: 0x100, array step: 0x4 */
        __IO uint16_t MATCHH;                            /**< SCT_MATCHH register, array offset: 0x102, array step: 0x4 */
      } MATCH_ACCESS16BIT[5];
      __IO uint32_t MATCH[5];                          /**< SCT match value register of match channels, array offset: 0x100, array step: 0x4 */
    };
  };
       uint8_t RESERVED_2[236];
  union {                                          /* offset: 0x200 */
    union {                                          /* offset: 0x200, array step: 0x4 */
      struct {                                         /* offset: 0x200, array step: 0x4 */
        __IO uint16_t CAPCTRLL;                          /**< SCT_CAPCTRLL register, array offset: 0x200, array step: 0x4 */
        __IO uint16_t CAPCTRLH;                          /**< SCT_CAPCTRLH register, array offset: 0x202, array step: 0x4 */
      } CAPCTRL_ACCESS16BIT[5];
      __IO uint32_t CAPCTRL[5];                        /**< SCT capture control register, array offset: 0x200, array step: 0x4 */
    };
    union {                                          /* offset: 0x200, array step: 0x4 */
      struct {                                         /* offset: 0x200, array step: 0x4 */
        __IO uint16_t MATCHRELL;                         /**< SCT_MATCHRELL register, array offset: 0x200, array step: 0x4 */
        __IO uint16_t MATCHRELH;                         /**< SCT_MATCHRELH register, array offset: 0x202, array step: 0x4 */
      } MATCHREL_ACCESS16BIT[5];
      __IO uint32_t MATCHREL[5];                       /**< SCT match reload value register, array offset: 0x200, array step: 0x4 */
    };
  };
       uint8_t RESERVED_3[236];
  struct {                                         /* offset: 0x300, array step: 0x8 */
    __IO uint32_t STATE;                             /**< SCT event state register 0, array offset: 0x300, array step: 0x8 */
    __IO uint32_t CTRL;                              /**< SCT event control register 0, array offset: 0x304, array step: 0x8 */
  } EV[6];
       uint8_t RESERVED_4[464];
  struct {                                         /* offset: 0x500, array step: 0x8 */
    __IO uint32_t SET;                               /**< SCT output 0 set register, array offset: 0x500, array step: 0x8 */
    __IO uint32_t CLR;                               /**< SCT output 0 clear register, array offset: 0x504, array step: 0x8 */
  } OUT[4];
} SCT_Type;

/* ----------------------------------------------------------------------------
   -- SCT Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup SCT_Register_Masks SCT Register Masks
 * @{
 */

/*! @name CONFIG - SCT configuration register */
/*! @{ */
#define SCT_CONFIG_UNIFY_MASK                    (0x1U)
#define SCT_CONFIG_UNIFY_SHIFT                   (0U)
/*! UNIFY - SCT operation
 *  0b0..The SCT operates as two 16-bit counters named COUNTER_L and COUNTER_H.
 *  0b1..The SCT operates as a unified 32-bit counter.
 */
#define SCT_CONFIG_UNIFY(x)                      (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_UNIFY_SHIFT)) & SCT_CONFIG_UNIFY_MASK)
#define SCT_CONFIG_CLKMODE_MASK                  (0x6U)
#define SCT_CONFIG_CLKMODE_SHIFT                 (1U)
/*! CLKMODE - SCT clock mode
 *  0b00..System Clock Mode. The system clock clocks the entire SCT module including the counter(s) and counter prescalers.
 *  0b01..Sampled System Clock Mode. The system clock clocks the SCT module, but the counter and prescalers are
 *        only enabled to count when the designated edge is detected on the input selected by the CKSEL field. The
 *        minimum pulse width on the selected clock-gate input is 1 bus clock period. This mode is the
 *        high-performance, sampled-clock mode.
 *  0b10..SCT Input Clock Mode. The input/edge selected by the CKSEL field clocks the SCT module, including the
 *        counters and prescalers, after first being synchronized to the system clock. The minimum pulse width on the
 *        clock input is 1 bus clock period. This mode is the low-power, sampled-clock mode.
 *  0b11..Asynchronous Mode. The entire SCT module is clocked directly by the input/edge selected by the CKSEL
 *        field. In this mode, the SCT outputs are switched synchronously to the SCT input clock - not the system
 *        clock. The input clock rate must be at least half the system clock rate and can be the same or faster than
 *        the system clock.
 */
#define SCT_CONFIG_CLKMODE(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_CLKMODE_SHIFT)) & SCT_CONFIG_CLKMODE_MASK)
#define SCT_CONFIG_CKSEL_MASK                    (0x78U)
#define SCT_CONFIG_CKSEL_SHIFT                   (3U)
/*! CKSEL - SCT clock select. The specific functionality of the designated input/edge is dependent
 *    on the CLKMODE bit selection in this register.
 *  0b0000..Rising edges on input 0.
 *  0b0001..Falling edges on input 0.
 *  0b0010..Rising edges on input 1.
 *  0b0011..Falling edges on input 1.
 *  0b0100..Rising edges on input 2.
 *  0b0101..Falling edges on input 2.
 *  0b0110..Rising edges on input 3.
 *  0b0111..Falling edges on input 3.
 */
#define SCT_CONFIG_CKSEL(x)                      (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_CKSEL_SHIFT)) & SCT_CONFIG_CKSEL_MASK)
#define SCT_CONFIG_NORELOAD_L_MASK               (0x80U)
#define SCT_CONFIG_NORELOAD_L_SHIFT              (7U)
/*! NORELOAD_L - A 1 in this bit prevents the lower match registers from being reloaded from their
 *    respective reload registers. Setting this bit eliminates the need to write to the reload
 *    registers MATCHREL if the match values are fixed. Software can write to set or clear this bit at any
 *    time. This bit applies to both the higher and lower registers when the UNIFY bit is set.
 */
#define SCT_CONFIG_NORELOAD_L(x)                 (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_NORELOAD_L_SHIFT)) & SCT_CONFIG_NORELOAD_L_MASK)
#define SCT_CONFIG_NORELOAD_H_MASK               (0x100U)
#define SCT_CONFIG_NORELOAD_H_SHIFT              (8U)
/*! NORELOAD_H - A 1 in this bit prevents the higher match registers from being reloaded from their
 *    respective reload registers. Setting this bit eliminates the need to write to the reload
 *    registers MATCHREL if the match values are fixed. Software can write to set or clear this bit at
 *    any time. This bit is not used when the UNIFY bit is set.
 */
#define SCT_CONFIG_NORELOAD_H(x)                 (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_NORELOAD_H_SHIFT)) & SCT_CONFIG_NORELOAD_H_MASK)
#define SCT_CONFIG_INSYNC_MASK                   (0x1FE00U)
#define SCT_CONFIG_INSYNC_SHIFT                  (9U)
/*! INSYNC - Synchronization for input N (bit 9 = input 0, bit 10 = input 1,, bit 12 = input 3); all
 *    other bits are reserved. A 1 in one of these bits subjects the corresponding input to
 *    synchronization to the SCT clock, before it is used to create an event. If an input is known to
 *    already be synchronous to the SCT clock, this bit may be set to 0 for faster input response. (Note:
 *    The SCT clock is the system clock for CKMODEs 0-2. It is the selected, asynchronous SCT input
 *    clock for CKMODE3). Note that the INSYNC field only affects inputs used for event generation.
 *    It does not apply to the clock input specified in the CKSEL field.
 */
#define SCT_CONFIG_INSYNC(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_INSYNC_SHIFT)) & SCT_CONFIG_INSYNC_MASK)
#define SCT_CONFIG_AUTOLIMIT_L_MASK              (0x20000U)
#define SCT_CONFIG_AUTOLIMIT_L_SHIFT             (17U)
/*! AUTOLIMIT_L - A one in this bit causes a match on match register 0 to be treated as a de-facto
 *    LIMIT condition without the need to define an associated event. As with any LIMIT event, this
 *    automatic limit causes the counter to be cleared to zero in unidirectional mode or to change
 *    the direction of count in bi-directional mode. Software can write to set or clear this bit at
 *    any time. This bit applies to both the higher and lower registers when the UNIFY bit is set.
 */
#define SCT_CONFIG_AUTOLIMIT_L(x)                (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_AUTOLIMIT_L_SHIFT)) & SCT_CONFIG_AUTOLIMIT_L_MASK)
#define SCT_CONFIG_AUTOLIMIT_H_MASK              (0x40000U)
#define SCT_CONFIG_AUTOLIMIT_H_SHIFT             (18U)
/*! AUTOLIMIT_H - A one in this bit will cause a match on match register 0 to be treated as a
 *    de-facto LIMIT condition without the need to define an associated event. As with any LIMIT event,
 *    this automatic limit causes the counter to be cleared to zero in unidirectional mode or to
 *    change the direction of count in bi-directional mode. Software can write to set or clear this bit
 *    at any time. This bit is not used when the UNIFY bit is set.
 */
#define SCT_CONFIG_AUTOLIMIT_H(x)                (((uint32_t)(((uint32_t)(x)) << SCT_CONFIG_AUTOLIMIT_H_SHIFT)) & SCT_CONFIG_AUTOLIMIT_H_MASK)
/*! @} */

/*! @name CTRLL - SCT_CTRLL register */
/*! @{ */
#define SCT_CTRLL_DOWN_L_MASK                    (0x1U)
#define SCT_CTRLL_DOWN_L_SHIFT                   (0U)
/*! DOWN_L - This bit is 1 when the L or unified counter is counting down. Hardware sets this bit
 *    when the counter is counting up, counter limit occurs, and BIDIR = 1.Hardware clears this bit
 *    when the counter is counting down and a limit condition occurs or when the counter reaches 0.
 */
#define SCT_CTRLL_DOWN_L(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_DOWN_L_SHIFT)) & SCT_CTRLL_DOWN_L_MASK)
#define SCT_CTRLL_STOP_L_MASK                    (0x2U)
#define SCT_CTRLL_STOP_L_SHIFT                   (1U)
/*! STOP_L - When this bit is 1 and HALT is 0, the L or unified counter does not run, but I/O events
 *    related to the counter can occur. If a designated start event occurs, this bit is cleared and
 *    counting resumes.
 */
#define SCT_CTRLL_STOP_L(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_STOP_L_SHIFT)) & SCT_CTRLL_STOP_L_MASK)
#define SCT_CTRLL_HALT_L_MASK                    (0x4U)
#define SCT_CTRLL_HALT_L_SHIFT                   (2U)
/*! HALT_L - When this bit is 1, the L or unified counter does not run and no events can occur. A
 *    reset sets this bit. When the HALT_L bit is one, the STOP_L bit is cleared. It is possible to
 *    remove the halt condition while keeping the SCT in the stop condition (not running) with a
 *    single write to this register to simultaneously clear the HALT bit and set the STOP bit. Once set,
 *    only software can clear this bit to restore counter operation. This bit is set on reset.
 */
#define SCT_CTRLL_HALT_L(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_HALT_L_SHIFT)) & SCT_CTRLL_HALT_L_MASK)
#define SCT_CTRLL_CLRCTR_L_MASK                  (0x8U)
#define SCT_CTRLL_CLRCTR_L_SHIFT                 (3U)
/*! CLRCTR_L - Writing a 1 to this bit clears the L or unified counter. This bit always reads as 0.
 */
#define SCT_CTRLL_CLRCTR_L(x)                    (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_CLRCTR_L_SHIFT)) & SCT_CTRLL_CLRCTR_L_MASK)
#define SCT_CTRLL_BIDIR_L_MASK                   (0x10U)
#define SCT_CTRLL_BIDIR_L_SHIFT                  (4U)
/*! BIDIR_L - L or unified counter direction select
 *  0b0..Up. The counter counts up to a limit condition, then is cleared to zero.
 *  0b1..Up-down. The counter counts up to a limit, then counts down to a limit condition or to 0.
 */
#define SCT_CTRLL_BIDIR_L(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_BIDIR_L_SHIFT)) & SCT_CTRLL_BIDIR_L_MASK)
#define SCT_CTRLL_PRE_L_MASK                     (0x1FE0U)
#define SCT_CTRLL_PRE_L_SHIFT                    (5U)
/*! PRE_L - Specifies the factor by which the SCT clock is prescaled to produce the L or unified
 *    counter clock. The counter clock is clocked at the rate of the SCT clock divided by PRE_L+1.
 *    Clear the counter (by writing a 1 to the CLRCTR bit) whenever changing the PRE value.
 */
#define SCT_CTRLL_PRE_L(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_CTRLL_PRE_L_SHIFT)) & SCT_CTRLL_PRE_L_MASK)
/*! @} */

/*! @name CTRLH - SCT_CTRLH register */
/*! @{ */
#define SCT_CTRLH_DOWN_H_MASK                    (0x1U)
#define SCT_CTRLH_DOWN_H_SHIFT                   (0U)
/*! DOWN_H - This bit is 1 when the H counter is counting down. Hardware sets this bit when the
 *    counter is counting, a counter limit condition occurs, and BIDIR is 1. Hardware clears this bit
 *    when the counter is counting down and a limit condition occurs or when the counter reaches 0.
 */
#define SCT_CTRLH_DOWN_H(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_DOWN_H_SHIFT)) & SCT_CTRLH_DOWN_H_MASK)
#define SCT_CTRLH_STOP_H_MASK                    (0x2U)
#define SCT_CTRLH_STOP_H_SHIFT                   (1U)
/*! STOP_H - When this bit is 1 and HALT is 0, the H counter does not, run but I/O events related to
 *    the counter can occur. If such an event matches the mask in the Start register, this bit is
 *    cleared and counting resumes.
 */
#define SCT_CTRLH_STOP_H(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_STOP_H_SHIFT)) & SCT_CTRLH_STOP_H_MASK)
#define SCT_CTRLH_HALT_H_MASK                    (0x4U)
#define SCT_CTRLH_HALT_H_SHIFT                   (2U)
/*! HALT_H - When this bit is 1, the H counter does not run and no events can occur. A reset sets
 *    this bit. When the HALT_H bit is one, the STOP_H bit is cleared. It is possible to remove the
 *    halt condition while keeping the SCT in the stop condition (not running) with a single write to
 *    this register to simultaneously clear the HALT bit and set the STOP bit. Once set, this bit
 *    can only be cleared by software to restore counter operation. This bit is set on reset.
 */
#define SCT_CTRLH_HALT_H(x)                      (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_HALT_H_SHIFT)) & SCT_CTRLH_HALT_H_MASK)
#define SCT_CTRLH_CLRCTR_H_MASK                  (0x8U)
#define SCT_CTRLH_CLRCTR_H_SHIFT                 (3U)
/*! CLRCTR_H - Writing a 1 to this bit clears the H counter. This bit always reads as 0.
 */
#define SCT_CTRLH_CLRCTR_H(x)                    (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_CLRCTR_H_SHIFT)) & SCT_CTRLH_CLRCTR_H_MASK)
#define SCT_CTRLH_BIDIR_H_MASK                   (0x10U)
#define SCT_CTRLH_BIDIR_H_SHIFT                  (4U)
/*! BIDIR_H - Direction select
 *  0b0..The H counter counts up to its limit condition, then is cleared to zero.
 *  0b1..The H counter counts up to its limit, then counts down to a limit condition or to 0.
 */
#define SCT_CTRLH_BIDIR_H(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_BIDIR_H_SHIFT)) & SCT_CTRLH_BIDIR_H_MASK)
#define SCT_CTRLH_PRE_H_MASK                     (0x1FE0U)
#define SCT_CTRLH_PRE_H_SHIFT                    (5U)
/*! PRE_H - Specifies the factor by which the SCT clock is prescaled to produce the H counter clock.
 *    The counter clock is clocked at the rate of the SCT clock divided by PRELH+1. Clear the
 *    counter (by writing a 1 to the CLRCTR bit) whenever changing the PRE value.
 */
#define SCT_CTRLH_PRE_H(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_CTRLH_PRE_H_SHIFT)) & SCT_CTRLH_PRE_H_MASK)
/*! @} */

/*! @name CTRL - SCT control register */
/*! @{ */
#define SCT_CTRL_DOWN_L_MASK                     (0x1U)
#define SCT_CTRL_DOWN_L_SHIFT                    (0U)
/*! DOWN_L - This bit is 1 when the L or unified counter is counting down. Hardware sets this bit
 *    when the counter is counting up, counter limit occurs, and BIDIR = 1.Hardware clears this bit
 *    when the counter is counting down and a limit condition occurs or when the counter reaches 0.
 */
#define SCT_CTRL_DOWN_L(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_DOWN_L_SHIFT)) & SCT_CTRL_DOWN_L_MASK)
#define SCT_CTRL_STOP_L_MASK                     (0x2U)
#define SCT_CTRL_STOP_L_SHIFT                    (1U)
/*! STOP_L - When this bit is 1 and HALT is 0, the L or unified counter does not run, but I/O events
 *    related to the counter can occur. If a designated start event occurs, this bit is cleared and
 *    counting resumes.
 */
#define SCT_CTRL_STOP_L(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_STOP_L_SHIFT)) & SCT_CTRL_STOP_L_MASK)
#define SCT_CTRL_HALT_L_MASK                     (0x4U)
#define SCT_CTRL_HALT_L_SHIFT                    (2U)
/*! HALT_L - When this bit is 1, the L or unified counter does not run and no events can occur. A
 *    reset sets this bit. When the HALT_L bit is one, the STOP_L bit is cleared. It is possible to
 *    remove the halt condition while keeping the SCT in the stop condition (not running) with a
 *    single write to this register to simultaneously clear the HALT bit and set the STOP bit. Once set,
 *    only software can clear this bit to restore counter operation. This bit is set on reset.
 */
#define SCT_CTRL_HALT_L(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_HALT_L_SHIFT)) & SCT_CTRL_HALT_L_MASK)
#define SCT_CTRL_CLRCTR_L_MASK                   (0x8U)
#define SCT_CTRL_CLRCTR_L_SHIFT                  (3U)
/*! CLRCTR_L - Writing a 1 to this bit clears the L or unified counter. This bit always reads as 0.
 */
#define SCT_CTRL_CLRCTR_L(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_CLRCTR_L_SHIFT)) & SCT_CTRL_CLRCTR_L_MASK)
#define SCT_CTRL_BIDIR_L_MASK                    (0x10U)
#define SCT_CTRL_BIDIR_L_SHIFT                   (4U)
/*! BIDIR_L - L or unified counter direction select
 *  0b0..Up. The counter counts up to a limit condition, then is cleared to zero.
 *  0b1..Up-down. The counter counts up to a limit, then counts down to a limit condition or to 0.
 */
#define SCT_CTRL_BIDIR_L(x)                      (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_BIDIR_L_SHIFT)) & SCT_CTRL_BIDIR_L_MASK)
#define SCT_CTRL_PRE_L_MASK                      (0x1FE0U)
#define SCT_CTRL_PRE_L_SHIFT                     (5U)
/*! PRE_L - Specifies the factor by which the SCT clock is prescaled to produce the L or unified
 *    counter clock. The counter clock is clocked at the rate of the SCT clock divided by PRE_L+1.
 *    Clear the counter (by writing a 1 to the CLRCTR bit) whenever changing the PRE value.
 */
#define SCT_CTRL_PRE_L(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_PRE_L_SHIFT)) & SCT_CTRL_PRE_L_MASK)
#define SCT_CTRL_DOWN_H_MASK                     (0x10000U)
#define SCT_CTRL_DOWN_H_SHIFT                    (16U)
/*! DOWN_H - This bit is 1 when the H counter is counting down. Hardware sets this bit when the
 *    counter is counting, a counter limit condition occurs, and BIDIR is 1. Hardware clears this bit
 *    when the counter is counting down and a limit condition occurs or when the counter reaches 0.
 */
#define SCT_CTRL_DOWN_H(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_DOWN_H_SHIFT)) & SCT_CTRL_DOWN_H_MASK)
#define SCT_CTRL_STOP_H_MASK                     (0x20000U)
#define SCT_CTRL_STOP_H_SHIFT                    (17U)
/*! STOP_H - When this bit is 1 and HALT is 0, the H counter does not, run but I/O events related to
 *    the counter can occur. If such an event matches the mask in the Start register, this bit is
 *    cleared and counting resumes.
 */
#define SCT_CTRL_STOP_H(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_STOP_H_SHIFT)) & SCT_CTRL_STOP_H_MASK)
#define SCT_CTRL_HALT_H_MASK                     (0x40000U)
#define SCT_CTRL_HALT_H_SHIFT                    (18U)
/*! HALT_H - When this bit is 1, the H counter does not run and no events can occur. A reset sets
 *    this bit. When the HALT_H bit is one, the STOP_H bit is cleared. It is possible to remove the
 *    halt condition while keeping the SCT in the stop condition (not running) with a single write to
 *    this register to simultaneously clear the HALT bit and set the STOP bit. Once set, this bit
 *    can only be cleared by software to restore counter operation. This bit is set on reset.
 */
#define SCT_CTRL_HALT_H(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_HALT_H_SHIFT)) & SCT_CTRL_HALT_H_MASK)
#define SCT_CTRL_CLRCTR_H_MASK                   (0x80000U)
#define SCT_CTRL_CLRCTR_H_SHIFT                  (19U)
/*! CLRCTR_H - Writing a 1 to this bit clears the H counter. This bit always reads as 0.
 */
#define SCT_CTRL_CLRCTR_H(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_CLRCTR_H_SHIFT)) & SCT_CTRL_CLRCTR_H_MASK)
#define SCT_CTRL_BIDIR_H_MASK                    (0x100000U)
#define SCT_CTRL_BIDIR_H_SHIFT                   (20U)
/*! BIDIR_H - Direction select
 *  0b0..The H counter counts up to its limit condition, then is cleared to zero.
 *  0b1..The H counter counts up to its limit, then counts down to a limit condition or to 0.
 */
#define SCT_CTRL_BIDIR_H(x)                      (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_BIDIR_H_SHIFT)) & SCT_CTRL_BIDIR_H_MASK)
#define SCT_CTRL_PRE_H_MASK                      (0x1FE00000U)
#define SCT_CTRL_PRE_H_SHIFT                     (21U)
/*! PRE_H - Specifies the factor by which the SCT clock is prescaled to produce the H counter clock.
 *    The counter clock is clocked at the rate of the SCT clock divided by PRELH+1. Clear the
 *    counter (by writing a 1 to the CLRCTR bit) whenever changing the PRE value.
 */
#define SCT_CTRL_PRE_H(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_CTRL_PRE_H_SHIFT)) & SCT_CTRL_PRE_H_MASK)
/*! @} */

/*! @name LIMITL - SCT_LIMITL register */
/*! @{ */
#define SCT_LIMITL_LIMITL_MASK                   (0xFFFFU)
#define SCT_LIMITL_LIMITL_SHIFT                  (0U)
#define SCT_LIMITL_LIMITL(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_LIMITL_LIMITL_SHIFT)) & SCT_LIMITL_LIMITL_MASK)
/*! @} */

/*! @name LIMITH - SCT_LIMITH register */
/*! @{ */
#define SCT_LIMITH_LIMITH_MASK                   (0xFFFFU)
#define SCT_LIMITH_LIMITH_SHIFT                  (0U)
#define SCT_LIMITH_LIMITH(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_LIMITH_LIMITH_SHIFT)) & SCT_LIMITH_LIMITH_MASK)
/*! @} */

/*! @name LIMIT - SCT limit event select register */
/*! @{ */
#define SCT_LIMIT_LIMMSK_L_MASK                  (0x3FU)
#define SCT_LIMIT_LIMMSK_L_SHIFT                 (0U)
/*! LIMMSK_L - If bit n is one, event n is used as a counter limit for the L or unified counter
 *    (event 0 = bit 0, event 1 = bit 1, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_LIMIT_LIMMSK_L(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_LIMIT_LIMMSK_L_SHIFT)) & SCT_LIMIT_LIMMSK_L_MASK)
#define SCT_LIMIT_LIMMSK_H_MASK                  (0x3F0000U)
#define SCT_LIMIT_LIMMSK_H_SHIFT                 (16U)
/*! LIMMSK_H - If bit n is one, event n is used as a counter limit for the H counter (event 0 = bit
 *    16, event 1 = bit 17, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_LIMIT_LIMMSK_H(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_LIMIT_LIMMSK_H_SHIFT)) & SCT_LIMIT_LIMMSK_H_MASK)
/*! @} */

/*! @name HALTL - SCT_HALTL register */
/*! @{ */
#define SCT_HALTL_HALTL_MASK                     (0xFFFFU)
#define SCT_HALTL_HALTL_SHIFT                    (0U)
#define SCT_HALTL_HALTL(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_HALTL_HALTL_SHIFT)) & SCT_HALTL_HALTL_MASK)
/*! @} */

/*! @name HALTH - SCT_HALTH register */
/*! @{ */
#define SCT_HALTH_HALTH_MASK                     (0xFFFFU)
#define SCT_HALTH_HALTH_SHIFT                    (0U)
#define SCT_HALTH_HALTH(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_HALTH_HALTH_SHIFT)) & SCT_HALTH_HALTH_MASK)
/*! @} */

/*! @name HALT - SCT halt event select register */
/*! @{ */
#define SCT_HALT_HALTMSK_L_MASK                  (0x3FU)
#define SCT_HALT_HALTMSK_L_SHIFT                 (0U)
/*! HALTMSK_L - If bit n is one, event n sets the HALT_L bit in the CTRL register (event 0 = bit 0,
 *    event 1 = bit 1, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_HALT_HALTMSK_L(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_HALT_HALTMSK_L_SHIFT)) & SCT_HALT_HALTMSK_L_MASK)
#define SCT_HALT_HALTMSK_H_MASK                  (0x3F0000U)
#define SCT_HALT_HALTMSK_H_SHIFT                 (16U)
/*! HALTMSK_H - If bit n is one, event n sets the HALT_H bit in the CTRL register (event 0 = bit 16,
 *    event 1 = bit 17, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_HALT_HALTMSK_H(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_HALT_HALTMSK_H_SHIFT)) & SCT_HALT_HALTMSK_H_MASK)
/*! @} */

/*! @name STOPL - SCT_STOPL register */
/*! @{ */
#define SCT_STOPL_STOPL_MASK                     (0xFFFFU)
#define SCT_STOPL_STOPL_SHIFT                    (0U)
#define SCT_STOPL_STOPL(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_STOPL_STOPL_SHIFT)) & SCT_STOPL_STOPL_MASK)
/*! @} */

/*! @name STOPH - SCT_STOPH register */
/*! @{ */
#define SCT_STOPH_STOPH_MASK                     (0xFFFFU)
#define SCT_STOPH_STOPH_SHIFT                    (0U)
#define SCT_STOPH_STOPH(x)                       (((uint16_t)(((uint16_t)(x)) << SCT_STOPH_STOPH_SHIFT)) & SCT_STOPH_STOPH_MASK)
/*! @} */

/*! @name STOP - SCT stop event select register */
/*! @{ */
#define SCT_STOP_STOPMSK_L_MASK                  (0x3FU)
#define SCT_STOP_STOPMSK_L_SHIFT                 (0U)
/*! STOPMSK_L - If bit n is one, event n sets the STOP_L bit in the CTRL register (event 0 = bit 0,
 *    event 1 = bit 1, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_STOP_STOPMSK_L(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_STOP_STOPMSK_L_SHIFT)) & SCT_STOP_STOPMSK_L_MASK)
#define SCT_STOP_STOPMSK_H_MASK                  (0x3F0000U)
#define SCT_STOP_STOPMSK_H_SHIFT                 (16U)
/*! STOPMSK_H - If bit n is one, event n sets the STOP_H bit in the CTRL register (event 0 = bit 16,
 *    event 1 = bit 17, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_STOP_STOPMSK_H(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_STOP_STOPMSK_H_SHIFT)) & SCT_STOP_STOPMSK_H_MASK)
/*! @} */

/*! @name STARTL - SCT_STARTL register */
/*! @{ */
#define SCT_STARTL_STARTL_MASK                   (0xFFFFU)
#define SCT_STARTL_STARTL_SHIFT                  (0U)
#define SCT_STARTL_STARTL(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_STARTL_STARTL_SHIFT)) & SCT_STARTL_STARTL_MASK)
/*! @} */

/*! @name STARTH - SCT_STARTH register */
/*! @{ */
#define SCT_STARTH_STARTH_MASK                   (0xFFFFU)
#define SCT_STARTH_STARTH_SHIFT                  (0U)
#define SCT_STARTH_STARTH(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_STARTH_STARTH_SHIFT)) & SCT_STARTH_STARTH_MASK)
/*! @} */

/*! @name START - SCT start event select register */
/*! @{ */
#define SCT_START_STARTMSK_L_MASK                (0x3FU)
#define SCT_START_STARTMSK_L_SHIFT               (0U)
/*! STARTMSK_L - If bit n is one, event n clears the STOP_L bit in the CTRL register (event 0 = bit
 *    0, event 1 = bit 1, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_START_STARTMSK_L(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_START_STARTMSK_L_SHIFT)) & SCT_START_STARTMSK_L_MASK)
#define SCT_START_STARTMSK_H_MASK                (0x3F0000U)
#define SCT_START_STARTMSK_H_SHIFT               (16U)
/*! STARTMSK_H - If bit n is one, event n clears the STOP_H bit in the CTRL register (event 0 = bit
 *    16, event 1 = bit 17, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_START_STARTMSK_H(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_START_STARTMSK_H_SHIFT)) & SCT_START_STARTMSK_H_MASK)
/*! @} */

/*! @name COUNTL - SCT_COUNTL register */
/*! @{ */
#define SCT_COUNTL_COUNTL_MASK                   (0xFFFFU)
#define SCT_COUNTL_COUNTL_SHIFT                  (0U)
#define SCT_COUNTL_COUNTL(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_COUNTL_COUNTL_SHIFT)) & SCT_COUNTL_COUNTL_MASK)
/*! @} */

/*! @name COUNTH - SCT_COUNTH register */
/*! @{ */
#define SCT_COUNTH_COUNTH_MASK                   (0xFFFFU)
#define SCT_COUNTH_COUNTH_SHIFT                  (0U)
#define SCT_COUNTH_COUNTH(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_COUNTH_COUNTH_SHIFT)) & SCT_COUNTH_COUNTH_MASK)
/*! @} */

/*! @name COUNT - SCT counter register */
/*! @{ */
#define SCT_COUNT_CTR_L_MASK                     (0xFFFFU)
#define SCT_COUNT_CTR_L_SHIFT                    (0U)
/*! CTR_L - When UNIFY = 0, read or write the 16-bit L counter value. When UNIFY = 1, read or write
 *    the lower 16 bits of the 32-bit unified counter.
 */
#define SCT_COUNT_CTR_L(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_COUNT_CTR_L_SHIFT)) & SCT_COUNT_CTR_L_MASK)
#define SCT_COUNT_CTR_H_MASK                     (0xFFFF0000U)
#define SCT_COUNT_CTR_H_SHIFT                    (16U)
/*! CTR_H - When UNIFY = 0, read or write the 16-bit H counter value. When UNIFY = 1, read or write
 *    the upper 16 bits of the 32-bit unified counter.
 */
#define SCT_COUNT_CTR_H(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_COUNT_CTR_H_SHIFT)) & SCT_COUNT_CTR_H_MASK)
/*! @} */

/*! @name STATEL - SCT_STATEL register */
/*! @{ */
#define SCT_STATEL_STATEL_MASK                   (0xFFFFU)
#define SCT_STATEL_STATEL_SHIFT                  (0U)
#define SCT_STATEL_STATEL(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_STATEL_STATEL_SHIFT)) & SCT_STATEL_STATEL_MASK)
/*! @} */

/*! @name STATEH - SCT_STATEH register */
/*! @{ */
#define SCT_STATEH_STATEH_MASK                   (0xFFFFU)
#define SCT_STATEH_STATEH_SHIFT                  (0U)
#define SCT_STATEH_STATEH(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_STATEH_STATEH_SHIFT)) & SCT_STATEH_STATEH_MASK)
/*! @} */

/*! @name STATE - SCT state register */
/*! @{ */
#define SCT_STATE_STATE_L_MASK                   (0x1FU)
#define SCT_STATE_STATE_L_SHIFT                  (0U)
/*! STATE_L - State variable.
 */
#define SCT_STATE_STATE_L(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_STATE_STATE_L_SHIFT)) & SCT_STATE_STATE_L_MASK)
#define SCT_STATE_STATE_H_MASK                   (0x1F0000U)
#define SCT_STATE_STATE_H_SHIFT                  (16U)
/*! STATE_H - State variable.
 */
#define SCT_STATE_STATE_H(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_STATE_STATE_H_SHIFT)) & SCT_STATE_STATE_H_MASK)
/*! @} */

/*! @name INPUT - SCT input register */
/*! @{ */
#define SCT_INPUT_AIN0_MASK                      (0x1U)
#define SCT_INPUT_AIN0_SHIFT                     (0U)
/*! AIN0 - Input 0 state. Input 0 state on the last SCT clock edge.
 */
#define SCT_INPUT_AIN0(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_AIN0_SHIFT)) & SCT_INPUT_AIN0_MASK)
#define SCT_INPUT_AIN1_MASK                      (0x2U)
#define SCT_INPUT_AIN1_SHIFT                     (1U)
/*! AIN1 - Input 1 state. Input 1 state on the last SCT clock edge.
 */
#define SCT_INPUT_AIN1(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_AIN1_SHIFT)) & SCT_INPUT_AIN1_MASK)
#define SCT_INPUT_AIN2_MASK                      (0x4U)
#define SCT_INPUT_AIN2_SHIFT                     (2U)
/*! AIN2 - Input 2 state. Input 2 state on the last SCT clock edge.
 */
#define SCT_INPUT_AIN2(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_AIN2_SHIFT)) & SCT_INPUT_AIN2_MASK)
#define SCT_INPUT_AIN3_MASK                      (0x8U)
#define SCT_INPUT_AIN3_SHIFT                     (3U)
/*! AIN3 - Input 3 state. Input 3 state on the last SCT clock edge.
 */
#define SCT_INPUT_AIN3(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_AIN3_SHIFT)) & SCT_INPUT_AIN3_MASK)
#define SCT_INPUT_SIN0_MASK                      (0x10000U)
#define SCT_INPUT_SIN0_SHIFT                     (16U)
/*! SIN0 - Input 0 state. Input 0 state following the synchronization specified by INSYNC.
 */
#define SCT_INPUT_SIN0(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_SIN0_SHIFT)) & SCT_INPUT_SIN0_MASK)
#define SCT_INPUT_SIN1_MASK                      (0x20000U)
#define SCT_INPUT_SIN1_SHIFT                     (17U)
/*! SIN1 - Input 1 state. Input 1 state following the synchronization specified by INSYNC.
 */
#define SCT_INPUT_SIN1(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_SIN1_SHIFT)) & SCT_INPUT_SIN1_MASK)
#define SCT_INPUT_SIN2_MASK                      (0x40000U)
#define SCT_INPUT_SIN2_SHIFT                     (18U)
/*! SIN2 - Input 2 state. Input 2 state following the synchronization specified by INSYNC.
 */
#define SCT_INPUT_SIN2(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_SIN2_SHIFT)) & SCT_INPUT_SIN2_MASK)
#define SCT_INPUT_SIN3_MASK                      (0x80000U)
#define SCT_INPUT_SIN3_SHIFT                     (19U)
/*! SIN3 - Input 3 state. Input 3 state following the synchronization specified by INSYNC.
 */
#define SCT_INPUT_SIN3(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_INPUT_SIN3_SHIFT)) & SCT_INPUT_SIN3_MASK)
/*! @} */

/*! @name REGMODEL - SCT_REGMODEL register */
/*! @{ */
#define SCT_REGMODEL_REGMODEL_MASK               (0xFFFFU)
#define SCT_REGMODEL_REGMODEL_SHIFT              (0U)
#define SCT_REGMODEL_REGMODEL(x)                 (((uint16_t)(((uint16_t)(x)) << SCT_REGMODEL_REGMODEL_SHIFT)) & SCT_REGMODEL_REGMODEL_MASK)
/*! @} */

/*! @name REGMODEH - SCT_REGMODEH register */
/*! @{ */
#define SCT_REGMODEH_REGMODEH_MASK               (0xFFFFU)
#define SCT_REGMODEH_REGMODEH_SHIFT              (0U)
#define SCT_REGMODEH_REGMODEH(x)                 (((uint16_t)(((uint16_t)(x)) << SCT_REGMODEH_REGMODEH_SHIFT)) & SCT_REGMODEH_REGMODEH_MASK)
/*! @} */

/*! @name REGMODE - SCT match/capture mode register */
/*! @{ */
#define SCT_REGMODE_REGMOD_L_MASK                (0x1FU)
#define SCT_REGMODE_REGMOD_L_SHIFT               (0U)
/*! REGMOD_L - Each bit controls one match/capture register (register 0 = bit 0, register 1 = bit 1,
 *    etc.). The number of bits = number of match/captures in this SCT. 0 = register operates as
 *    match register. 1 = register operates as capture register.
 */
#define SCT_REGMODE_REGMOD_L(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_REGMODE_REGMOD_L_SHIFT)) & SCT_REGMODE_REGMOD_L_MASK)
#define SCT_REGMODE_REGMOD_H_MASK                (0x1F0000U)
#define SCT_REGMODE_REGMOD_H_SHIFT               (16U)
/*! REGMOD_H - Each bit controls one match/capture register (register 0 = bit 16, register 1 = bit
 *    17, etc.). The number of bits = number of match/captures in this SCT. 0 = register operates as
 *    match registers. 1 = register operates as capture registers.
 */
#define SCT_REGMODE_REGMOD_H(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_REGMODE_REGMOD_H_SHIFT)) & SCT_REGMODE_REGMOD_H_MASK)
/*! @} */

/*! @name OUTPUT - SCT output register */
/*! @{ */
#define SCT_OUTPUT_OUT_MASK                      (0xFU)
#define SCT_OUTPUT_OUT_SHIFT                     (0U)
/*! OUT - Writing a 1 to bit n forces the corresponding output HIGH. Writing a 0 forces the
 *    corresponding output LOW (output 0 = bit 0, output 1 = bit 1, etc.). The number of bits = number of
 *    outputs in this SCT.
 */
#define SCT_OUTPUT_OUT(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_OUTPUT_OUT_SHIFT)) & SCT_OUTPUT_OUT_MASK)
/*! @} */

/*! @name OUTPUTDIRCTRL - SCT output counter direction control register */
/*! @{ */
#define SCT_OUTPUTDIRCTRL_SETCLR0_MASK           (0x3U)
#define SCT_OUTPUTDIRCTRL_SETCLR0_SHIFT          (0U)
/*! SETCLR0 - Set/clear operation on output 0. Value 0x3 is reserved. Do not program this value.
 *  0b00..Set and clear do not depend on the direction of any counter.
 *  0b01..Set and clear are reversed when counter L or the unified counter is counting down.
 *  0b10..Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
 */
#define SCT_OUTPUTDIRCTRL_SETCLR0(x)             (((uint32_t)(((uint32_t)(x)) << SCT_OUTPUTDIRCTRL_SETCLR0_SHIFT)) & SCT_OUTPUTDIRCTRL_SETCLR0_MASK)
#define SCT_OUTPUTDIRCTRL_SETCLR1_MASK           (0xCU)
#define SCT_OUTPUTDIRCTRL_SETCLR1_SHIFT          (2U)
/*! SETCLR1 - Set/clear operation on output 1. Value 0x3 is reserved. Do not program this value.
 *  0b00..Set and clear do not depend on the direction of any counter.
 *  0b01..Set and clear are reversed when counter L or the unified counter is counting down.
 *  0b10..Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
 */
#define SCT_OUTPUTDIRCTRL_SETCLR1(x)             (((uint32_t)(((uint32_t)(x)) << SCT_OUTPUTDIRCTRL_SETCLR1_SHIFT)) & SCT_OUTPUTDIRCTRL_SETCLR1_MASK)
#define SCT_OUTPUTDIRCTRL_SETCLR2_MASK           (0x30U)
#define SCT_OUTPUTDIRCTRL_SETCLR2_SHIFT          (4U)
/*! SETCLR2 - Set/clear operation on output 2. Value 0x3 is reserved. Do not program this value.
 *  0b00..Set and clear do not depend on the direction of any counter.
 *  0b01..Set and clear are reversed when counter L or the unified counter is counting down.
 *  0b10..Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
 */
#define SCT_OUTPUTDIRCTRL_SETCLR2(x)             (((uint32_t)(((uint32_t)(x)) << SCT_OUTPUTDIRCTRL_SETCLR2_SHIFT)) & SCT_OUTPUTDIRCTRL_SETCLR2_MASK)
#define SCT_OUTPUTDIRCTRL_SETCLR3_MASK           (0xC0U)
#define SCT_OUTPUTDIRCTRL_SETCLR3_SHIFT          (6U)
/*! SETCLR3 - Set/clear operation on output 3. Value 0x3 is reserved. Do not program this value.
 *  0b00..Set and clear do not depend on the direction of any counter.
 *  0b01..Set and clear are reversed when counter L or the unified counter is counting down.
 *  0b10..Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
 */
#define SCT_OUTPUTDIRCTRL_SETCLR3(x)             (((uint32_t)(((uint32_t)(x)) << SCT_OUTPUTDIRCTRL_SETCLR3_SHIFT)) & SCT_OUTPUTDIRCTRL_SETCLR3_MASK)
/*! @} */

/*! @name RES - SCT conflict resolution register */
/*! @{ */
#define SCT_RES_O0RES_MASK                       (0x3U)
#define SCT_RES_O0RES_SHIFT                      (0U)
/*! O0RES - Effect of simultaneous set and clear on output 0.
 *  0b00..No change.
 *  0b01..Set output (or clear based on the SETCLR0 field in the OUTPUTDIRCTRL register).
 *  0b10..Clear output (or set based on the SETCLR0 field).
 *  0b11..Toggle output.
 */
#define SCT_RES_O0RES(x)                         (((uint32_t)(((uint32_t)(x)) << SCT_RES_O0RES_SHIFT)) & SCT_RES_O0RES_MASK)
#define SCT_RES_O1RES_MASK                       (0xCU)
#define SCT_RES_O1RES_SHIFT                      (2U)
/*! O1RES - Effect of simultaneous set and clear on output 1.
 *  0b00..No change.
 *  0b01..Set output (or clear based on the SETCLR1 field in the OUTPUTDIRCTRL register).
 *  0b10..Clear output (or set based on the SETCLR1 field).
 *  0b11..Toggle output.
 */
#define SCT_RES_O1RES(x)                         (((uint32_t)(((uint32_t)(x)) << SCT_RES_O1RES_SHIFT)) & SCT_RES_O1RES_MASK)
#define SCT_RES_O2RES_MASK                       (0x30U)
#define SCT_RES_O2RES_SHIFT                      (4U)
/*! O2RES - Effect of simultaneous set and clear on output 2.
 *  0b00..No change.
 *  0b01..Set output (or clear based on the SETCLR2 field in the OUTPUTDIRCTRL register).
 *  0b10..Clear output n (or set based on the SETCLR2 field).
 *  0b11..Toggle output.
 */
#define SCT_RES_O2RES(x)                         (((uint32_t)(((uint32_t)(x)) << SCT_RES_O2RES_SHIFT)) & SCT_RES_O2RES_MASK)
#define SCT_RES_O3RES_MASK                       (0xC0U)
#define SCT_RES_O3RES_SHIFT                      (6U)
/*! O3RES - Effect of simultaneous set and clear on output 3.
 *  0b00..No change.
 *  0b01..Set output (or clear based on the SETCLR3 field in the OUTPUTDIRCTRL register).
 *  0b10..Clear output (or set based on the SETCLR3 field).
 *  0b11..Toggle output.
 */
#define SCT_RES_O3RES(x)                         (((uint32_t)(((uint32_t)(x)) << SCT_RES_O3RES_SHIFT)) & SCT_RES_O3RES_MASK)
/*! @} */

/*! @name EVEN - SCT event interrupt enable register */
/*! @{ */
#define SCT_EVEN_IEN_MASK                        (0x3FU)
#define SCT_EVEN_IEN_SHIFT                       (0U)
/*! IEN - The SCT requests an interrupt when bit n of this register and the event flag register are
 *    both one (event 0 = bit 0, event 1 = bit 1, etc.). The number of bits = number of events in
 *    this SCT.
 */
#define SCT_EVEN_IEN(x)                          (((uint32_t)(((uint32_t)(x)) << SCT_EVEN_IEN_SHIFT)) & SCT_EVEN_IEN_MASK)
/*! @} */

/*! @name EVFLAG - SCT event flag register */
/*! @{ */
#define SCT_EVFLAG_FLAG_MASK                     (0x3FU)
#define SCT_EVFLAG_FLAG_SHIFT                    (0U)
/*! FLAG - Bit n is one if event n has occurred since reset or a 1 was last written to this bit
 *    (event 0 = bit 0, event 1 = bit 1, etc.). The number of bits = number of events in this SCT.
 */
#define SCT_EVFLAG_FLAG(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_EVFLAG_FLAG_SHIFT)) & SCT_EVFLAG_FLAG_MASK)
/*! @} */

/*! @name CONEN - SCT conflict interrupt enable register */
/*! @{ */
#define SCT_CONEN_NCEN_MASK                      (0xFU)
#define SCT_CONEN_NCEN_SHIFT                     (0U)
/*! NCEN - The SCT requests an interrupt when bit n of this register and the SCT conflict flag
 *    register are both one (output 0 = bit 0, output 1 = bit 1, etc.). The number of bits = number of
 *    outputs in this SCT.
 */
#define SCT_CONEN_NCEN(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_CONEN_NCEN_SHIFT)) & SCT_CONEN_NCEN_MASK)
/*! @} */

/*! @name CONFLAG - SCT conflict flag register */
/*! @{ */
#define SCT_CONFLAG_NCFLAG_MASK                  (0xFU)
#define SCT_CONFLAG_NCFLAG_SHIFT                 (0U)
/*! NCFLAG - Bit n is one if a no-change conflict event occurred on output n since reset or a 1 was
 *    last written to this bit (output 0 = bit 0, output 1 = bit 1, etc.). The number of bits =
 *    number of outputs in this SCT.
 */
#define SCT_CONFLAG_NCFLAG(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_CONFLAG_NCFLAG_SHIFT)) & SCT_CONFLAG_NCFLAG_MASK)
#define SCT_CONFLAG_BUSERRL_MASK                 (0x40000000U)
#define SCT_CONFLAG_BUSERRL_SHIFT                (30U)
/*! BUSERRL - The most recent bus error from this SCT involved writing CTR L/Unified, STATE
 *    L/Unified, MATCH L/Unified, or the Output register when the L/U counter was not halted. A word write
 *    to certain L and H registers can be half successful and half unsuccessful.
 */
#define SCT_CONFLAG_BUSERRL(x)                   (((uint32_t)(((uint32_t)(x)) << SCT_CONFLAG_BUSERRL_SHIFT)) & SCT_CONFLAG_BUSERRL_MASK)
#define SCT_CONFLAG_BUSERRH_MASK                 (0x80000000U)
#define SCT_CONFLAG_BUSERRH_SHIFT                (31U)
/*! BUSERRH - The most recent bus error from this SCT involved writing CTR H, STATE H, MATCH H, or
 *    the Output register when the H counter was not halted.
 */
#define SCT_CONFLAG_BUSERRH(x)                   (((uint32_t)(((uint32_t)(x)) << SCT_CONFLAG_BUSERRH_SHIFT)) & SCT_CONFLAG_BUSERRH_MASK)
/*! @} */

/*! @name CAPL - SCT_CAPL register */
/*! @{ */
#define SCT_CAPL_CAPL_MASK                       (0xFFFFU)
#define SCT_CAPL_CAPL_SHIFT                      (0U)
#define SCT_CAPL_CAPL(x)                         (((uint16_t)(((uint16_t)(x)) << SCT_CAPL_CAPL_SHIFT)) & SCT_CAPL_CAPL_MASK)
/*! @} */

/* The count of SCT_CAPL */
#define SCT_CAPL_COUNT                           (5U)

/*! @name CAPH - SCT_CAPH register */
/*! @{ */
#define SCT_CAPH_CAPH_MASK                       (0xFFFFU)
#define SCT_CAPH_CAPH_SHIFT                      (0U)
#define SCT_CAPH_CAPH(x)                         (((uint16_t)(((uint16_t)(x)) << SCT_CAPH_CAPH_SHIFT)) & SCT_CAPH_CAPH_MASK)
/*! @} */

/* The count of SCT_CAPH */
#define SCT_CAPH_COUNT                           (5U)

/*! @name CAP - SCT capture register of capture channel */
/*! @{ */
#define SCT_CAP_CAPn_L_MASK                      (0xFFFFU)
#define SCT_CAP_CAPn_L_SHIFT                     (0U)
/*! CAPn_L - When UNIFY = 0, read the 16-bit counter value at which this register was last captured.
 *    When UNIFY = 1, read the lower 16 bits of the 32-bit value at which this register was last
 *    captured.
 */
#define SCT_CAP_CAPn_L(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_CAP_CAPn_L_SHIFT)) & SCT_CAP_CAPn_L_MASK)
#define SCT_CAP_CAPn_H_MASK                      (0xFFFF0000U)
#define SCT_CAP_CAPn_H_SHIFT                     (16U)
/*! CAPn_H - When UNIFY = 0, read the 16-bit counter value at which this register was last captured.
 *    When UNIFY = 1, read the upper 16 bits of the 32-bit value at which this register was last
 *    captured.
 */
#define SCT_CAP_CAPn_H(x)                        (((uint32_t)(((uint32_t)(x)) << SCT_CAP_CAPn_H_SHIFT)) & SCT_CAP_CAPn_H_MASK)
/*! @} */

/* The count of SCT_CAP */
#define SCT_CAP_COUNT                            (5U)

/*! @name MATCHL - SCT_MATCHL register */
/*! @{ */
#define SCT_MATCHL_MATCHL_MASK                   (0xFFFFU)
#define SCT_MATCHL_MATCHL_SHIFT                  (0U)
#define SCT_MATCHL_MATCHL(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_MATCHL_MATCHL_SHIFT)) & SCT_MATCHL_MATCHL_MASK)
/*! @} */

/* The count of SCT_MATCHL */
#define SCT_MATCHL_COUNT                         (5U)

/*! @name MATCHH - SCT_MATCHH register */
/*! @{ */
#define SCT_MATCHH_MATCHH_MASK                   (0xFFFFU)
#define SCT_MATCHH_MATCHH_SHIFT                  (0U)
#define SCT_MATCHH_MATCHH(x)                     (((uint16_t)(((uint16_t)(x)) << SCT_MATCHH_MATCHH_SHIFT)) & SCT_MATCHH_MATCHH_MASK)
/*! @} */

/* The count of SCT_MATCHH */
#define SCT_MATCHH_COUNT                         (5U)

/*! @name MATCH - SCT match value register of match channels */
/*! @{ */
#define SCT_MATCH_MATCHn_L_MASK                  (0xFFFFU)
#define SCT_MATCH_MATCHn_L_SHIFT                 (0U)
/*! MATCHn_L - When UNIFY = 0, read or write the 16-bit value to be compared to the L counter. When
 *    UNIFY = 1, read or write the lower 16 bits of the 32-bit value to be compared to the unified
 *    counter.
 */
#define SCT_MATCH_MATCHn_L(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_MATCH_MATCHn_L_SHIFT)) & SCT_MATCH_MATCHn_L_MASK)
#define SCT_MATCH_MATCHn_H_MASK                  (0xFFFF0000U)
#define SCT_MATCH_MATCHn_H_SHIFT                 (16U)
/*! MATCHn_H - When UNIFY = 0, read or write the 16-bit value to be compared to the H counter. When
 *    UNIFY = 1, read or write the upper 16 bits of the 32-bit value to be compared to the unified
 *    counter.
 */
#define SCT_MATCH_MATCHn_H(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_MATCH_MATCHn_H_SHIFT)) & SCT_MATCH_MATCHn_H_MASK)
/*! @} */

/* The count of SCT_MATCH */
#define SCT_MATCH_COUNT                          (5U)

/*! @name CAPCTRLL - SCT_CAPCTRLL register */
/*! @{ */
#define SCT_CAPCTRLL_CAPCTRLL_MASK               (0xFFFFU)
#define SCT_CAPCTRLL_CAPCTRLL_SHIFT              (0U)
#define SCT_CAPCTRLL_CAPCTRLL(x)                 (((uint16_t)(((uint16_t)(x)) << SCT_CAPCTRLL_CAPCTRLL_SHIFT)) & SCT_CAPCTRLL_CAPCTRLL_MASK)
/*! @} */

/* The count of SCT_CAPCTRLL */
#define SCT_CAPCTRLL_COUNT                       (5U)

/*! @name CAPCTRLH - SCT_CAPCTRLH register */
/*! @{ */
#define SCT_CAPCTRLH_CAPCTRLH_MASK               (0xFFFFU)
#define SCT_CAPCTRLH_CAPCTRLH_SHIFT              (0U)
#define SCT_CAPCTRLH_CAPCTRLH(x)                 (((uint16_t)(((uint16_t)(x)) << SCT_CAPCTRLH_CAPCTRLH_SHIFT)) & SCT_CAPCTRLH_CAPCTRLH_MASK)
/*! @} */

/* The count of SCT_CAPCTRLH */
#define SCT_CAPCTRLH_COUNT                       (5U)

/*! @name CAPCTRL - SCT capture control register */
/*! @{ */
#define SCT_CAPCTRL_CAPCONn_L_MASK               (0xFFFFU)
#define SCT_CAPCTRL_CAPCONn_L_SHIFT              (0U)
/*! CAPCONn_L - If bit m is one, event m causes the CAPn_L (UNIFY = 0) or the CAPn (UNIFY = 1)
 *    register to be loaded (event 0 = bit 0, event 1 = bit 1, etc.). The number of bits = number of
 *    match/captures in this SCT.
 */
#define SCT_CAPCTRL_CAPCONn_L(x)                 (((uint32_t)(((uint32_t)(x)) << SCT_CAPCTRL_CAPCONn_L_SHIFT)) & SCT_CAPCTRL_CAPCONn_L_MASK)
#define SCT_CAPCTRL_CAPCONn_H_MASK               (0xFFFF0000U)
#define SCT_CAPCTRL_CAPCONn_H_SHIFT              (16U)
/*! CAPCONn_H - If bit m is one, event m causes the CAPn_H (UNIFY = 0) register to be loaded (event
 *    0 = bit 16, event 1 = bit 17, etc.). The number of bits = number of match/captures in this SCT.
 */
#define SCT_CAPCTRL_CAPCONn_H(x)                 (((uint32_t)(((uint32_t)(x)) << SCT_CAPCTRL_CAPCONn_H_SHIFT)) & SCT_CAPCTRL_CAPCONn_H_MASK)
/*! @} */

/* The count of SCT_CAPCTRL */
#define SCT_CAPCTRL_COUNT                        (5U)

/*! @name MATCHRELL - SCT_MATCHRELL register */
/*! @{ */
#define SCT_MATCHRELL_MATCHRELL_MASK             (0xFFFFU)
#define SCT_MATCHRELL_MATCHRELL_SHIFT            (0U)
#define SCT_MATCHRELL_MATCHRELL(x)               (((uint16_t)(((uint16_t)(x)) << SCT_MATCHRELL_MATCHRELL_SHIFT)) & SCT_MATCHRELL_MATCHRELL_MASK)
/*! @} */

/* The count of SCT_MATCHRELL */
#define SCT_MATCHRELL_COUNT                      (5U)

/*! @name MATCHRELH - SCT_MATCHRELH register */
/*! @{ */
#define SCT_MATCHRELH_MATCHRELH_MASK             (0xFFFFU)
#define SCT_MATCHRELH_MATCHRELH_SHIFT            (0U)
#define SCT_MATCHRELH_MATCHRELH(x)               (((uint16_t)(((uint16_t)(x)) << SCT_MATCHRELH_MATCHRELH_SHIFT)) & SCT_MATCHRELH_MATCHRELH_MASK)
/*! @} */

/* The count of SCT_MATCHRELH */
#define SCT_MATCHRELH_COUNT                      (5U)

/*! @name MATCHREL - SCT match reload value register */
/*! @{ */
#define SCT_MATCHREL_RELOADn_L_MASK              (0xFFFFU)
#define SCT_MATCHREL_RELOADn_L_SHIFT             (0U)
/*! RELOADn_L - When UNIFY = 0, specifies the 16-bit value to be loaded into the MATCHn_L register.
 *    When UNIFY = 1, specifies the lower 16 bits of the 32-bit value to be loaded into the MATCHn
 *    register.
 */
#define SCT_MATCHREL_RELOADn_L(x)                (((uint32_t)(((uint32_t)(x)) << SCT_MATCHREL_RELOADn_L_SHIFT)) & SCT_MATCHREL_RELOADn_L_MASK)
#define SCT_MATCHREL_RELOADn_H_MASK              (0xFFFF0000U)
#define SCT_MATCHREL_RELOADn_H_SHIFT             (16U)
/*! RELOADn_H - When UNIFY = 0, specifies the 16-bit to be loaded into the MATCHn_H register. When
 *    UNIFY = 1, specifies the upper 16 bits of the 32-bit value to be loaded into the MATCHn
 *    register.
 */
#define SCT_MATCHREL_RELOADn_H(x)                (((uint32_t)(((uint32_t)(x)) << SCT_MATCHREL_RELOADn_H_SHIFT)) & SCT_MATCHREL_RELOADn_H_MASK)
/*! @} */

/* The count of SCT_MATCHREL */
#define SCT_MATCHREL_COUNT                       (5U)

/*! @name EV_STATE - SCT event state register 0 */
/*! @{ */
#define SCT_EV_STATE_STATEMSK0_MASK              (0x1U)
#define SCT_EV_STATE_STATEMSK0_SHIFT             (0U)
/*! STATEMSK0 - If bit m is one, event n happens in state m of the counter selected by the HEVENT
 *    bit (n = event number, m = state number; state 0 = bit 0, state 1= bit 1, etc.). The number of
 *    bits = number of states in this SCT.
 */
#define SCT_EV_STATE_STATEMSK0(x)                (((uint32_t)(((uint32_t)(x)) << SCT_EV_STATE_STATEMSK0_SHIFT)) & SCT_EV_STATE_STATEMSK0_MASK)
#define SCT_EV_STATE_STATEMSK1_MASK              (0x2U)
#define SCT_EV_STATE_STATEMSK1_SHIFT             (1U)
/*! STATEMSK1 - If bit m is one, event n happens in state m of the counter selected by the HEVENT
 *    bit (n = event number, m = state number; state 0 = bit 0, state 1= bit 1, etc.). The number of
 *    bits = number of states in this SCT.
 */
#define SCT_EV_STATE_STATEMSK1(x)                (((uint32_t)(((uint32_t)(x)) << SCT_EV_STATE_STATEMSK1_SHIFT)) & SCT_EV_STATE_STATEMSK1_MASK)
/*! @} */

/* The count of SCT_EV_STATE */
#define SCT_EV_STATE_COUNT                       (6U)

/*! @name EV_CTRL - SCT event control register 0 */
/*! @{ */
#define SCT_EV_CTRL_MATCHSEL_MASK                (0xFU)
#define SCT_EV_CTRL_MATCHSEL_SHIFT               (0U)
/*! MATCHSEL - Selects the Match register associated with this event (if any). A match can occur
 *    only when the counter selected by the HEVENT bit is running.
 */
#define SCT_EV_CTRL_MATCHSEL(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_MATCHSEL_SHIFT)) & SCT_EV_CTRL_MATCHSEL_MASK)
#define SCT_EV_CTRL_HEVENT_MASK                  (0x10U)
#define SCT_EV_CTRL_HEVENT_SHIFT                 (4U)
/*! HEVENT - Select L/H counter. Do not set this bit if UNIFY = 1.
 *  0b0..Selects the L state and the L match register selected by MATCHSEL.
 *  0b1..Selects the H state and the H match register selected by MATCHSEL.
 */
#define SCT_EV_CTRL_HEVENT(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_HEVENT_SHIFT)) & SCT_EV_CTRL_HEVENT_MASK)
#define SCT_EV_CTRL_OUTSEL_MASK                  (0x20U)
#define SCT_EV_CTRL_OUTSEL_SHIFT                 (5U)
/*! OUTSEL - Input/output select
 *  0b0..Selects the inputs selected by IOSEL.
 *  0b1..Selects the outputs selected by IOSEL.
 */
#define SCT_EV_CTRL_OUTSEL(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_OUTSEL_SHIFT)) & SCT_EV_CTRL_OUTSEL_MASK)
#define SCT_EV_CTRL_IOSEL_MASK                   (0x3C0U)
#define SCT_EV_CTRL_IOSEL_SHIFT                  (6U)
/*! IOSEL - Selects the input or output signal number associated with this event (if any). Do not
 *    select an input in this register if CKMODE is 1x. In this case the clock input is an implicit
 *    ingredient of every event.
 */
#define SCT_EV_CTRL_IOSEL(x)                     (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_IOSEL_SHIFT)) & SCT_EV_CTRL_IOSEL_MASK)
#define SCT_EV_CTRL_IOCOND_MASK                  (0xC00U)
#define SCT_EV_CTRL_IOCOND_SHIFT                 (10U)
/*! IOCOND - Selects the I/O condition for event n. (The detection of edges on outputs lag the
 *    conditions that switch the outputs by one SCT clock). In order to guarantee proper edge/state
 *    detection, an input must have a minimum pulse width of at least one SCT clock period .
 *  0b00..LOW
 *  0b01..Rise
 *  0b10..Fall
 *  0b11..HIGH
 */
#define SCT_EV_CTRL_IOCOND(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_IOCOND_SHIFT)) & SCT_EV_CTRL_IOCOND_MASK)
#define SCT_EV_CTRL_COMBMODE_MASK                (0x3000U)
#define SCT_EV_CTRL_COMBMODE_SHIFT               (12U)
/*! COMBMODE - Selects how the specified match and I/O condition are used and combined.
 *  0b00..OR. The event occurs when either the specified match or I/O condition occurs.
 *  0b01..MATCH. Uses the specified match only.
 *  0b10..IO. Uses the specified I/O condition only.
 *  0b11..AND. The event occurs when the specified match and I/O condition occur simultaneously.
 */
#define SCT_EV_CTRL_COMBMODE(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_COMBMODE_SHIFT)) & SCT_EV_CTRL_COMBMODE_MASK)
#define SCT_EV_CTRL_STATELD_MASK                 (0x4000U)
#define SCT_EV_CTRL_STATELD_SHIFT                (14U)
/*! STATELD - This bit controls how the STATEV value modifies the state selected by HEVENT when this
 *    event is the highest-numbered event occurring for that state.
 *  0b0..STATEV value is added into STATE (the carry-out is ignored).
 *  0b1..STATEV value is loaded into STATE.
 */
#define SCT_EV_CTRL_STATELD(x)                   (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_STATELD_SHIFT)) & SCT_EV_CTRL_STATELD_MASK)
#define SCT_EV_CTRL_STATEV_MASK                  (0xF8000U)
#define SCT_EV_CTRL_STATEV_SHIFT                 (15U)
/*! STATEV - This value is loaded into or added to the state selected by HEVENT, depending on
 *    STATELD, when this event is the highest-numbered event occurring for that state. If STATELD and
 *    STATEV are both zero, there is no change to the STATE value.
 */
#define SCT_EV_CTRL_STATEV(x)                    (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_STATEV_SHIFT)) & SCT_EV_CTRL_STATEV_MASK)
#define SCT_EV_CTRL_MATCHMEM_MASK                (0x100000U)
#define SCT_EV_CTRL_MATCHMEM_SHIFT               (20U)
/*! MATCHMEM - If this bit is one and the COMBMODE field specifies a match component to the
 *    triggering of this event, then a match is considered to be active whenever the counter value is
 *    GREATER THAN OR EQUAL TO the value specified in the match register when counting up, LESS THEN OR
 *    EQUAL TO the match value when counting down. If this bit is zero, a match is only be active
 *    during the cycle when the counter is equal to the match value.
 */
#define SCT_EV_CTRL_MATCHMEM(x)                  (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_MATCHMEM_SHIFT)) & SCT_EV_CTRL_MATCHMEM_MASK)
#define SCT_EV_CTRL_DIRECTION_MASK               (0x600000U)
#define SCT_EV_CTRL_DIRECTION_SHIFT              (21U)
/*! DIRECTION - Direction qualifier for event generation. This field only applies when the counters
 *    are operating in BIDIR mode. If BIDIR = 0, the SCT ignores this field. Value 0x3 is reserved.
 *  0b00..Direction independent. This event is triggered regardless of the count direction.
 *  0b01..Counting up. This event is triggered only during up-counting when BIDIR = 1.
 *  0b10..Counting down. This event is triggered only during down-counting when BIDIR = 1.
 */
#define SCT_EV_CTRL_DIRECTION(x)                 (((uint32_t)(((uint32_t)(x)) << SCT_EV_CTRL_DIRECTION_SHIFT)) & SCT_EV_CTRL_DIRECTION_MASK)
/*! @} */

/* The count of SCT_EV_CTRL */
#define SCT_EV_CTRL_COUNT                        (6U)

/*! @name OUT_SET - SCT output 0 set register */
/*! @{ */
#define SCT_OUT_SET_SET_MASK                     (0x3FU)
#define SCT_OUT_SET_SET_SHIFT                    (0U)
/*! SET - A 1 in bit m selects event m to set output n (or clear it if SETCLRn = 0x1 or 0x2) output
 *    0 = bit 0, output 1 = bit 1, etc. The number of bits = number of events in this SCT. When the
 *    counter is used in bi-directional mode, it is possible to reverse the action specified by the
 *    output set and clear registers when counting down, See the OUTPUTCTRL register.
 */
#define SCT_OUT_SET_SET(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_OUT_SET_SET_SHIFT)) & SCT_OUT_SET_SET_MASK)
/*! @} */

/* The count of SCT_OUT_SET */
#define SCT_OUT_SET_COUNT                        (4U)

/*! @name OUT_CLR - SCT output 0 clear register */
/*! @{ */
#define SCT_OUT_CLR_CLR_MASK                     (0x3FU)
#define SCT_OUT_CLR_CLR_SHIFT                    (0U)
/*! CLR - A 1 in bit m selects event m to clear output n (or set it if SETCLRn = 0x1 or 0x2) event 0
 *    = bit 0, event 1 = bit 1, etc. The number of bits = number of events in this SCT. When the
 *    counter is used in bi-directional mode, it is possible to reverse the action specified by the
 *    output set and clear registers when counting down, See the OUTPUTCTRL register.
 */
#define SCT_OUT_CLR_CLR(x)                       (((uint32_t)(((uint32_t)(x)) << SCT_OUT_CLR_CLR_SHIFT)) & SCT_OUT_CLR_CLR_MASK)
/*! @} */

/* The count of SCT_OUT_CLR */
#define SCT_OUT_CLR_COUNT                        (4U)


/*!
 * @}
 */ /* end of group SCT_Register_Masks */


/* SCT - Peripheral instance base addresses */
/** Peripheral SCT0 base address */
#define SCT0_BASE                                (0x50004000u)
/** Peripheral SCT0 base pointer */
#define SCT0                                     ((SCT_Type *)SCT0_BASE)
/** Array initializer of SCT peripheral base addresses */
#define SCT_BASE_ADDRS                           { SCT0_BASE }
/** Array initializer of SCT peripheral base pointers */
#define SCT_BASE_PTRS                            { SCT0 }
/** Interrupt vectors for the SCT peripheral type */
#define SCT_IRQS                                 { SCT0_IRQn }

/*!
 * @}
 */ /* end of group SCT_Peripheral_Access_Layer */


/* ----------------------------------------------------------------------------
   -- SPI Peripheral Access Layer
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup SPI_Peripheral_Access_Layer SPI Peripheral Access Layer
 * @{
 */

/** SPI - Register Layout Typedef */
typedef struct {
  __IO uint32_t CFG;                               /**< SPI Configuration register, offset: 0x0 */
  __IO uint32_t DLY;                               /**< SPI Delay register, offset: 0x4 */
  __IO uint32_t STAT;                              /**< SPI Status. Some status flags can be cleared by writing a 1 to that bit position, offset: 0x8 */
  __IO uint32_t INTENSET;                          /**< SPI Interrupt Enable read and Set. A complete value may be read from this register. Writing a 1 to any implemented bit position causes that bit to be set., offset: 0xC */
  __O  uint32_t INTENCLR;                          /**< SPI Interrupt Enable Clear. Writing a 1 to any implemented bit position causes the corresponding bit in INTENSET to be cleared., offset: 0x10 */
  __I  uint32_t RXDAT;                             /**< SPI Receive Data, offset: 0x14 */
  __IO uint32_t TXDATCTL;                          /**< SPI Transmit Data with Control, offset: 0x18 */
  __IO uint32_t TXDAT;                             /**< SPI Transmit Data., offset: 0x1C */
  __IO uint32_t TXCTL;                             /**< SPI Transmit Control, offset: 0x20 */
  __IO uint32_t DIV;                               /**< SPI clock Divider, offset: 0x24 */
  __I  uint32_t INTSTAT;                           /**< SPI Interrupt Status, offset: 0x28 */
} SPI_Type;

/* ----------------------------------------------------------------------------
   -- SPI Register Masks
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup SPI_Register_Masks SPI Register Masks
 * @{
 */

/*! @name CFG - SPI Configuration register */
/*! @{ */
#define SPI_CFG_ENABLE_MASK                      (0x1U)
#define SPI_CFG_ENABLE_SHIFT                     (0U)
/*! ENABLE - SPI enable.
 *  0b0..Disabled. The SPI is disabled and the internal state machine and counters are reset.
 *  0b1..Enabled. The SPI is enabled for operation.
 */
#define SPI_CFG_ENABLE(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_CFG_ENABLE_SHIFT)) & SPI_CFG_ENABLE_MASK)
#define SPI_CFG_MASTER_MASK                      (0x4U)
#define SPI_CFG_MASTER_SHIFT                     (2U)
/*! MASTER - Master mode select.
 *  0b0..Slave mode. The SPI will operate in slave mode. SCK, MOSI, and the SSEL signals are inputs, MISO is an output.
 *  0b1..Master mode. The SPI will operate in master mode. SCK, MOSI, and the SSEL signals are outputs, MISO is an input.
 */
#define SPI_CFG_MASTER(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_CFG_MASTER_SHIFT)) & SPI_CFG_MASTER_MASK)
#define SPI_CFG_LSBF_MASK                        (0x8U)
#define SPI_CFG_LSBF_SHIFT                       (3U)
/*! LSBF - LSB First mode enable.
 *  0b0..Standard. Data is transmitted and received in standard MSB first order.
 *  0b1..Reverse. Data is transmitted and received in reverse order (LSB first).
 */
#define SPI_CFG_LSBF(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_CFG_LSBF_SHIFT)) & SPI_CFG_LSBF_MASK)
#define SPI_CFG_CPHA_MASK                        (0x10U)
#define SPI_CFG_CPHA_SHIFT                       (4U)
/*! CPHA - Clock Phase select.
 *  0b0..Change. The SPI captures serial data on the first clock transition of the transfer (when the clock
 *       changes away from the rest state). Data is changed on the following edge.
 *  0b1..Capture. The SPI changes serial data on the first clock transition of the transfer (when the clock
 *       changes away from the rest state). Data is captured on the following edge.
 */
#define SPI_CFG_CPHA(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_CFG_CPHA_SHIFT)) & SPI_CFG_CPHA_MASK)
#define SPI_CFG_CPOL_MASK                        (0x20U)
#define SPI_CFG_CPOL_SHIFT                       (5U)
/*! CPOL - Clock Polarity select.
 *  0b0..Low. The rest state of the clock (between transfers) is low.
 *  0b1..High. The rest state of the clock (between transfers) is high.
 */
#define SPI_CFG_CPOL(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_CFG_CPOL_SHIFT)) & SPI_CFG_CPOL_MASK)
#define SPI_CFG_LOOP_MASK                        (0x80U)
#define SPI_CFG_LOOP_SHIFT                       (7U)
/*! LOOP - Loopback mode enable. Loopback mode applies only to Master mode, and connects transmit
 *    and receive data connected together to allow simple software testing.
 *  0b0..Disabled.
 *  0b1..Enabled.
 */
#define SPI_CFG_LOOP(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_CFG_LOOP_SHIFT)) & SPI_CFG_LOOP_MASK)
#define SPI_CFG_SPOL0_MASK                       (0x100U)
#define SPI_CFG_SPOL0_SHIFT                      (8U)
/*! SPOL0 - SSEL0 Polarity select.
 *  0b0..Low. The SSEL0 pin is active low.
 *  0b1..High. The SSEL0 pin is active high.
 */
#define SPI_CFG_SPOL0(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_CFG_SPOL0_SHIFT)) & SPI_CFG_SPOL0_MASK)
/*! @} */

/*! @name DLY - SPI Delay register */
/*! @{ */
#define SPI_DLY_PRE_DELAY_MASK                   (0xFU)
#define SPI_DLY_PRE_DELAY_SHIFT                  (0U)
/*! PRE_DELAY - Controls the amount of time between SSEL assertion and the beginning of a data
 *    transfer. There is always one SPI clock time between SSEL assertion and the first clock edge. This
 *    is not considered part of the pre-delay. 0x0 = No additional time is inserted. 0x1 = 1 SPI
 *    clock time is inserted. 0x2 = 2 SPI clock times are inserted. 0xF = 15 SPI clock times are
 *    inserted.
 */
#define SPI_DLY_PRE_DELAY(x)                     (((uint32_t)(((uint32_t)(x)) << SPI_DLY_PRE_DELAY_SHIFT)) & SPI_DLY_PRE_DELAY_MASK)
#define SPI_DLY_POST_DELAY_MASK                  (0xF0U)
#define SPI_DLY_POST_DELAY_SHIFT                 (4U)
/*! POST_DELAY - Controls the amount of time between the end of a data transfer and SSEL
 *    deassertion. 0x0 = No additional time is inserted. 0x1 = 1 SPI clock time is inserted. 0x2 = 2 SPI clock
 *    times are inserted. 0xF = 15 SPI clock times are inserted.
 */
#define SPI_DLY_POST_DELAY(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_DLY_POST_DELAY_SHIFT)) & SPI_DLY_POST_DELAY_MASK)
#define SPI_DLY_FRAME_DELAY_MASK                 (0xF00U)
#define SPI_DLY_FRAME_DELAY_SHIFT                (8U)
/*! FRAME_DELAY - If the EOF flag is set, controls the minimum amount of time between the current
 *    frame and the next frame (or SSEL deassertion if EOT). 0x0 = No additional time is inserted. 0x1
 *    = 1 SPI clock time is inserted. 0x2 = 2 SPI clock times are inserted. 0xF = 15 SPI clock
 *    times are inserted.
 */
#define SPI_DLY_FRAME_DELAY(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_DLY_FRAME_DELAY_SHIFT)) & SPI_DLY_FRAME_DELAY_MASK)
#define SPI_DLY_TRANSFER_DELAY_MASK              (0xF000U)
#define SPI_DLY_TRANSFER_DELAY_SHIFT             (12U)
/*! TRANSFER_DELAY - Controls the minimum amount of time that the SSEL is deasserted between
 *    transfers. 0x0 = The minimum time that SSEL is deasserted is 1 SPI clock time. (Zero added time.) 0x1
 *    = The minimum time that SSEL is deasserted is 2 SPI clock times. 0x2 = The minimum time that
 *    SSEL is deasserted is 3 SPI clock times. 0xF = The minimum time that SSEL is deasserted is 16
 *    SPI clock times.
 */
#define SPI_DLY_TRANSFER_DELAY(x)                (((uint32_t)(((uint32_t)(x)) << SPI_DLY_TRANSFER_DELAY_SHIFT)) & SPI_DLY_TRANSFER_DELAY_MASK)
/*! @} */

/*! @name STAT - SPI Status. Some status flags can be cleared by writing a 1 to that bit position */
/*! @{ */
#define SPI_STAT_RXRDY_MASK                      (0x1U)
#define SPI_STAT_RXRDY_SHIFT                     (0U)
/*! RXRDY - Receiver Ready flag. When 1, indicates that data is available to be read from the
 *    receiver buffer. Cleared after a read of the RXDAT register.
 */
#define SPI_STAT_RXRDY(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_STAT_RXRDY_SHIFT)) & SPI_STAT_RXRDY_MASK)
#define SPI_STAT_TXRDY_MASK                      (0x2U)
#define SPI_STAT_TXRDY_SHIFT                     (1U)
/*! TXRDY - Transmitter Ready flag. When 1, this bit indicates that data may be written to the
 *    transmit buffer. Previous data may still be in the process of being transmitted. Cleared when data
 *    is written to TXDAT or TXDATCTL until the data is moved to the transmit shift register.
 */
#define SPI_STAT_TXRDY(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_STAT_TXRDY_SHIFT)) & SPI_STAT_TXRDY_MASK)
#define SPI_STAT_RXOV_MASK                       (0x4U)
#define SPI_STAT_RXOV_SHIFT                      (2U)
/*! RXOV - Receiver Overrun interrupt flag. This flag applies only to slave mode (Master = 0). This
 *    flag is set when the beginning of a received character is detected while the receiver buffer
 *    is still in use. If this occurs, the receiver buffer contents are preserved, and the incoming
 *    data is lost. Data received by the SPI should be considered undefined if RxOv is set.
 */
#define SPI_STAT_RXOV(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_STAT_RXOV_SHIFT)) & SPI_STAT_RXOV_MASK)
#define SPI_STAT_TXUR_MASK                       (0x8U)
#define SPI_STAT_TXUR_SHIFT                      (3U)
/*! TXUR - Transmitter Underrun interrupt flag. This flag applies only to slave mode (Master = 0).
 *    In this case, the transmitter must begin sending new data on the next input clock if the
 *    transmitter is idle. If that data is not available in the transmitter holding register at that
 *    point, there is no data to transmit and the TXUR flag is set. Data transmitted by the SPI should be
 *    considered undefined if TXUR is set.
 */
#define SPI_STAT_TXUR(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_STAT_TXUR_SHIFT)) & SPI_STAT_TXUR_MASK)
#define SPI_STAT_SSA_MASK                        (0x10U)
#define SPI_STAT_SSA_SHIFT                       (4U)
/*! SSA - Slave Select Assert. This flag is set whenever any slave select transitions from
 *    deasserted to asserted, in both master and slave modes. This allows determining when the SPI
 *    transmit/receive functions become busy, and allows waking up the device from reduced power modes when a
 *    slave mode access begins. This flag is cleared by software.
 */
#define SPI_STAT_SSA(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_STAT_SSA_SHIFT)) & SPI_STAT_SSA_MASK)
#define SPI_STAT_SSD_MASK                        (0x20U)
#define SPI_STAT_SSD_SHIFT                       (5U)
/*! SSD - Slave Select Deassert. This flag is set whenever any asserted slave selects transition to
 *    deasserted, in both master and slave modes. This allows determining when the SPI
 *    transmit/receive functions become idle. This flag is cleared by software.
 */
#define SPI_STAT_SSD(x)                          (((uint32_t)(((uint32_t)(x)) << SPI_STAT_SSD_SHIFT)) & SPI_STAT_SSD_MASK)
#define SPI_STAT_STALLED_MASK                    (0x40U)
#define SPI_STAT_STALLED_SHIFT                   (6U)
/*! STALLED - Stalled status flag. This indicates whether the SPI is currently in a stall condition.
 */
#define SPI_STAT_STALLED(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_STAT_STALLED_SHIFT)) & SPI_STAT_STALLED_MASK)
#define SPI_STAT_ENDTRANSFER_MASK                (0x80U)
#define SPI_STAT_ENDTRANSFER_SHIFT               (7U)
/*! ENDTRANSFER - End Transfer control bit. Software can set this bit to force an end to the current
 *    transfer when the transmitter finishes any activity already in progress, as if the EOT flag
 *    had been set prior to the last transmission. This capability is included to support cases where
 *    it is not known when transmit data is written that it will be the end of a transfer. The bit
 *    is cleared when the transmitter becomes idle as the transfer comes to an end. Forcing an end
 *    of transfer in this manner causes any specified FRAME_DELAY and TRANSFER_DELAY to be inserted.
 */
#define SPI_STAT_ENDTRANSFER(x)                  (((uint32_t)(((uint32_t)(x)) << SPI_STAT_ENDTRANSFER_SHIFT)) & SPI_STAT_ENDTRANSFER_MASK)
#define SPI_STAT_MSTIDLE_MASK                    (0x100U)
#define SPI_STAT_MSTIDLE_SHIFT                   (8U)
/*! MSTIDLE - Master idle status flag. This bit is 1 whenever the SPI master function is fully idle.
 *    This means that the transmit holding register is empty and the transmitter is not in the
 *    process of sending data.
 */
#define SPI_STAT_MSTIDLE(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_STAT_MSTIDLE_SHIFT)) & SPI_STAT_MSTIDLE_MASK)
/*! @} */

/*! @name INTENSET - SPI Interrupt Enable read and Set. A complete value may be read from this register. Writing a 1 to any implemented bit position causes that bit to be set. */
/*! @{ */
#define SPI_INTENSET_RXRDYEN_MASK                (0x1U)
#define SPI_INTENSET_RXRDYEN_SHIFT               (0U)
/*! RXRDYEN - Determines whether an interrupt occurs when receiver data is available.
 *  0b0..No interrupt will be generated when receiver data is available.
 *  0b1..An interrupt will be generated when receiver data is available in the RXDAT register.
 */
#define SPI_INTENSET_RXRDYEN(x)                  (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_RXRDYEN_SHIFT)) & SPI_INTENSET_RXRDYEN_MASK)
#define SPI_INTENSET_TXRDYEN_MASK                (0x2U)
#define SPI_INTENSET_TXRDYEN_SHIFT               (1U)
/*! TXRDYEN - Determines whether an interrupt occurs when the transmitter holding register is available.
 *  0b0..No interrupt will be generated when the transmitter holding register is available.
 *  0b1..An interrupt will be generated when data may be written to TXDAT.
 */
#define SPI_INTENSET_TXRDYEN(x)                  (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_TXRDYEN_SHIFT)) & SPI_INTENSET_TXRDYEN_MASK)
#define SPI_INTENSET_RXOVEN_MASK                 (0x4U)
#define SPI_INTENSET_RXOVEN_SHIFT                (2U)
/*! RXOVEN - Determines whether an interrupt occurs when a receiver overrun occurs. This happens in
 *    slave mode when there is a need for the receiver to move newly received data to the RXDAT
 *    register when it is already in use. The interface prevents receiver overrun in Master mode by not
 *    allowing a new transmission to begin when a receiver overrun would otherwise occur.
 *  0b0..No interrupt will be generated when a receiver overrun occurs.
 *  0b1..An interrupt will be generated if a receiver overrun occurs.
 */
#define SPI_INTENSET_RXOVEN(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_RXOVEN_SHIFT)) & SPI_INTENSET_RXOVEN_MASK)
#define SPI_INTENSET_TXUREN_MASK                 (0x8U)
#define SPI_INTENSET_TXUREN_SHIFT                (3U)
/*! TXUREN - Determines whether an interrupt occurs when a transmitter underrun occurs. This happens
 *    in slave mode when there is a need to transmit data when none is available.
 *  0b0..No interrupt will be generated when the transmitter underruns.
 *  0b1..An interrupt will be generated if the transmitter underruns.
 */
#define SPI_INTENSET_TXUREN(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_TXUREN_SHIFT)) & SPI_INTENSET_TXUREN_MASK)
#define SPI_INTENSET_SSAEN_MASK                  (0x10U)
#define SPI_INTENSET_SSAEN_SHIFT                 (4U)
/*! SSAEN - Determines whether an interrupt occurs when the Slave Select is asserted.
 *  0b0..No interrupt will be generated when any Slave Select transitions from deasserted to asserted.
 *  0b1..An interrupt will be generated when any Slave Select transitions from deasserted to asserted.
 */
#define SPI_INTENSET_SSAEN(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_SSAEN_SHIFT)) & SPI_INTENSET_SSAEN_MASK)
#define SPI_INTENSET_SSDEN_MASK                  (0x20U)
#define SPI_INTENSET_SSDEN_SHIFT                 (5U)
/*! SSDEN - Determines whether an interrupt occurs when the Slave Select is deasserted.
 *  0b0..No interrupt will be generated when all asserted Slave Selects transition to deasserted.
 *  0b1..An interrupt will be generated when all asserted Slave Selects transition to deasserted.
 */
#define SPI_INTENSET_SSDEN(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_INTENSET_SSDEN_SHIFT)) & SPI_INTENSET_SSDEN_MASK)
/*! @} */

/*! @name INTENCLR - SPI Interrupt Enable Clear. Writing a 1 to any implemented bit position causes the corresponding bit in INTENSET to be cleared. */
/*! @{ */
#define SPI_INTENCLR_RXRDYEN_MASK                (0x1U)
#define SPI_INTENCLR_RXRDYEN_SHIFT               (0U)
/*! RXRDYEN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_RXRDYEN(x)                  (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_RXRDYEN_SHIFT)) & SPI_INTENCLR_RXRDYEN_MASK)
#define SPI_INTENCLR_TXRDYEN_MASK                (0x2U)
#define SPI_INTENCLR_TXRDYEN_SHIFT               (1U)
/*! TXRDYEN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_TXRDYEN(x)                  (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_TXRDYEN_SHIFT)) & SPI_INTENCLR_TXRDYEN_MASK)
#define SPI_INTENCLR_RXOVEN_MASK                 (0x4U)
#define SPI_INTENCLR_RXOVEN_SHIFT                (2U)
/*! RXOVEN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_RXOVEN(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_RXOVEN_SHIFT)) & SPI_INTENCLR_RXOVEN_MASK)
#define SPI_INTENCLR_TXUREN_MASK                 (0x8U)
#define SPI_INTENCLR_TXUREN_SHIFT                (3U)
/*! TXUREN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_TXUREN(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_TXUREN_SHIFT)) & SPI_INTENCLR_TXUREN_MASK)
#define SPI_INTENCLR_SSAEN_MASK                  (0x10U)
#define SPI_INTENCLR_SSAEN_SHIFT                 (4U)
/*! SSAEN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_SSAEN(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_SSAEN_SHIFT)) & SPI_INTENCLR_SSAEN_MASK)
#define SPI_INTENCLR_SSDEN_MASK                  (0x20U)
#define SPI_INTENCLR_SSDEN_SHIFT                 (5U)
/*! SSDEN - Writing 1 clears the corresponding bits in the INTENSET register.
 */
#define SPI_INTENCLR_SSDEN(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_INTENCLR_SSDEN_SHIFT)) & SPI_INTENCLR_SSDEN_MASK)
/*! @} */

/*! @name RXDAT - SPI Receive Data */
/*! @{ */
#define SPI_RXDAT_RXDAT_MASK                     (0xFFFFU)
#define SPI_RXDAT_RXDAT_SHIFT                    (0U)
/*! RXDAT - Receiver Data. This contains the next piece of received data. The number of bits that
 *    are used depends on the LEN setting in TXCTL / TXDATCTL.
 */
#define SPI_RXDAT_RXDAT(x)                       (((uint32_t)(((uint32_t)(x)) << SPI_RXDAT_RXDAT_SHIFT)) & SPI_RXDAT_RXDAT_MASK)
#define SPI_RXDAT_RXSSEL0_N_MASK                 (0x10000U)
#define SPI_RXDAT_RXSSEL0_N_SHIFT                (16U)
/*! RXSSEL0_N - Slave Select for receive. This field allows the state of the SSEL0 pin to be saved
 *    along with received data. The value will reflect the SSEL0 pin for both master and slave
 *    operation. A zero indicates that a slave select is active. The actual polarity of each slave select
 *    pin is configured by the related SPOL bit in CFG.
 */
#define SPI_RXDAT_RXSSEL0_N(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_RXDAT_RXSSEL0_N_SHIFT)) & SPI_RXDAT_RXSSEL0_N_MASK)
#define SPI_RXDAT_SOT_MASK                       (0x100000U)
#define SPI_RXDAT_SOT_SHIFT                      (20U)
/*! SOT - Start of Transfer flag. This flag will be 1 if this is the first data after the SSELs went
 *    from deasserted to asserted (i.e., any previous transfer has ended). This information can be
 *    used to identify the first piece of data in cases where the transfer length is greater than 16
 *    bit.
 */
#define SPI_RXDAT_SOT(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_RXDAT_SOT_SHIFT)) & SPI_RXDAT_SOT_MASK)
/*! @} */

/*! @name TXDATCTL - SPI Transmit Data with Control */
/*! @{ */
#define SPI_TXDATCTL_TXDAT_MASK                  (0xFFFFU)
#define SPI_TXDATCTL_TXDAT_SHIFT                 (0U)
/*! TXDAT - Transmit Data. This field provides from 1 to 16 bits of data to be transmitted.
 */
#define SPI_TXDATCTL_TXDAT(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_TXDAT_SHIFT)) & SPI_TXDATCTL_TXDAT_MASK)
#define SPI_TXDATCTL_TXSSEL0_N_MASK              (0x10000U)
#define SPI_TXDATCTL_TXSSEL0_N_SHIFT             (16U)
/*! TXSSEL0_N - Transmit Slave Select. This field asserts SSEL0 in master mode. The output on the
 *    pin is active LOW by default. Remark: The active state of the SSEL0 pin is configured by bits in
 *    the CFG register.
 *  0b0..SSEL0 asserted.
 *  0b1..SSEL0 not asserted.
 */
#define SPI_TXDATCTL_TXSSEL0_N(x)                (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_TXSSEL0_N_SHIFT)) & SPI_TXDATCTL_TXSSEL0_N_MASK)
#define SPI_TXDATCTL_EOT_MASK                    (0x100000U)
#define SPI_TXDATCTL_EOT_SHIFT                   (20U)
/*! EOT - End of Transfer. The asserted SSEL will be deasserted at the end of a transfer, and remain
 *    so for at least the time specified by the Transfer_delay value in the DLY register.
 *  0b0..This piece of data is not treated as the end of a transfer. SSEL will not be deasserted at the end of this data.
 *  0b1..This piece of data is treated as the end of a transfer. SSEL will be deasserted at the end of this piece of data.
 */
#define SPI_TXDATCTL_EOT(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_EOT_SHIFT)) & SPI_TXDATCTL_EOT_MASK)
#define SPI_TXDATCTL_EOF_MASK                    (0x200000U)
#define SPI_TXDATCTL_EOF_SHIFT                   (21U)
/*! EOF - End of Frame. Between frames, a delay may be inserted, as defined by the FRAME_DELAY value
 *    in the DLY register. The end of a frame may not be particularly meaningful if the FRAME_DELAY
 *    value = 0. This control can be used as part of the support for frame lengths greater than 16
 *    bits.
 *  0b0..This piece of data transmitted is not treated as the end of a frame.
 *  0b1..This piece of data is treated as the end of a frame, causing the FRAME_DELAY time to be inserted before subsequent data is transmitted.
 */
#define SPI_TXDATCTL_EOF(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_EOF_SHIFT)) & SPI_TXDATCTL_EOF_MASK)
#define SPI_TXDATCTL_RXIGNORE_MASK               (0x400000U)
#define SPI_TXDATCTL_RXIGNORE_SHIFT              (22U)
/*! RXIGNORE - Receive Ignore. This allows data to be transmitted using the SPI without the need to
 *    read unneeded data from the receiver.Setting this bit simplifies the transmit process and can
 *    be used with the DMA.
 *  0b0..Received data must be read in order to allow transmission to progress. In slave mode, an overrun error
 *       will occur if received data is not read before new data is received.
 *  0b1..Received data is ignored, allowing transmission without reading unneeded received data. No receiver flags are generated.
 */
#define SPI_TXDATCTL_RXIGNORE(x)                 (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_RXIGNORE_SHIFT)) & SPI_TXDATCTL_RXIGNORE_MASK)
#define SPI_TXDATCTL_LEN_MASK                    (0xF000000U)
#define SPI_TXDATCTL_LEN_SHIFT                   (24U)
/*! LEN - Data Length. Specifies the data length from 1 to 16 bits. Note that transfer lengths
 *    greater than 16 bits are supported by implementing multiple sequential transmits. 0x0 = Data
 *    transfer is 1 bit in length. 0x1 = Data transfer is 2 bits in length. 0x2 = Data transfer is 3 bits
 *    in length. ... 0xF = Data transfer is 16 bits in length.
 *  0b0000..
 *  0b0001..Data transfer is 1 bit in length.
 *  0b0010..Data transfer is 2 bit in length.
 *  0b0011..Data transfer is 3 bit in length.
 *  0b0100..Data transfer is 4 bit in length.
 *  0b0101..Data transfer is 5 bit in length.
 *  0b0110..Data transfer is 6 bit in length.
 *  0b0111..Data transfer is 7 bit in length.
 *  0b1000..Data transfer is 8 bit in length.
 *  0b1001..Data transfer is 9 bit in length.
 *  0b1010..Data transfer is 10 bit in length.
 *  0b1011..Data transfer is 11 bit in length.
 *  0b1100..Data transfer is 12 bit in length.
 *  0b1101..Data transfer is 13 bit in length.
 *  0b1110..Data transfer is 14 bit in length.
 *  0b1111..Data transfer is 15 bit in length.
 */
#define SPI_TXDATCTL_LEN(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_TXDATCTL_LEN_SHIFT)) & SPI_TXDATCTL_LEN_MASK)
/*! @} */

/*! @name TXDAT - SPI Transmit Data. */
/*! @{ */
#define SPI_TXDAT_DATA_MASK                      (0xFFFFU)
#define SPI_TXDAT_DATA_SHIFT                     (0U)
/*! DATA - Transmit Data. This field provides from 4 to 16 bits of data to be transmitted.
 */
#define SPI_TXDAT_DATA(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_TXDAT_DATA_SHIFT)) & SPI_TXDAT_DATA_MASK)
/*! @} */

/*! @name TXCTL - SPI Transmit Control */
/*! @{ */
#define SPI_TXCTL_TXSSEL0_N_MASK                 (0x10000U)
#define SPI_TXCTL_TXSSEL0_N_SHIFT                (16U)
/*! TXSSEL0_N - Transmit Slave Select 0.
 */
#define SPI_TXCTL_TXSSEL0_N(x)                   (((uint32_t)(((uint32_t)(x)) << SPI_TXCTL_TXSSEL0_N_SHIFT)) & SPI_TXCTL_TXSSEL0_N_MASK)
#define SPI_TXCTL_EOT_MASK                       (0x100000U)
#define SPI_TXCTL_EOT_SHIFT                      (20U)
/*! EOT - End of Transfer.
 */
#define SPI_TXCTL_EOT(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_TXCTL_EOT_SHIFT)) & SPI_TXCTL_EOT_MASK)
#define SPI_TXCTL_EOF_MASK                       (0x200000U)
#define SPI_TXCTL_EOF_SHIFT                      (21U)
/*! EOF - End of Frame.
 */
#define SPI_TXCTL_EOF(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_TXCTL_EOF_SHIFT)) & SPI_TXCTL_EOF_MASK)
#define SPI_TXCTL_RXIGNORE_MASK                  (0x400000U)
#define SPI_TXCTL_RXIGNORE_SHIFT                 (22U)
/*! RXIGNORE - Receive Ignore.
 */
#define SPI_TXCTL_RXIGNORE(x)                    (((uint32_t)(((uint32_t)(x)) << SPI_TXCTL_RXIGNORE_SHIFT)) & SPI_TXCTL_RXIGNORE_MASK)
#define SPI_TXCTL_LEN_MASK                       (0xF000000U)
#define SPI_TXCTL_LEN_SHIFT                      (24U)
/*! LEN - Data transfer Length.
 */
#define SPI_TXCTL_LEN(x)                         (((uint32_t)(((uint32_t)(x)) << SPI_TXCTL_LEN_SHIFT)) & SPI_TXCTL_LEN_MASK)
/*! @} */

/*! @name DIV - SPI clock Divider */
/*! @{ */
#define SPI_DIV_DIVVAL_MASK                      (0xFFFFU)
#define SPI_DIV_DIVVAL_SHIFT                     (0U)
/*! DIVVAL - Rate divider value. Specifies how the Flexcomm clock (FCLK) is divided to produce the
 *    SPI clock rate in master mode. DIVVAL is -1 encoded such that the value 0 results in FCLK/1,
 *    the value 1 results in FCLK/2, up to the maximum possible divide value of 0xFFFF, which results
 *    in FCLK/65536.
 */
#define SPI_DIV_DIVVAL(x)                        (((uint32_t)(((uint32_t)(x)) << SPI_DIV_DIVVAL_SHIFT)) & SPI_DIV_DIVVAL_MASK)
/*! @} */

/*! @name INTSTAT - SPI Interrupt Status */
/*! @{ */
#define SPI_INTSTAT_RXRDY_MASK                   (0x1U)
#define SPI_INTSTAT_RXRDY_SHIFT                  (0U)
/*! RXRDY - Receiver Ready flag.
 */
#define SPI_INTSTAT_RXRDY(x)                     (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_RXRDY_SHIFT)) & SPI_INTSTAT_RXRDY_MASK)
#define SPI_INTSTAT_TXRDY_MASK                   (0x2U)
#define SPI_INTSTAT_TXRDY_SHIFT                  (1U)
/*! TXRDY - Transmitter Ready flag.
 */
#define SPI_INTSTAT_TXRDY(x)                     (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_TXRDY_SHIFT)) & SPI_INTSTAT_TXRDY_MASK)
#define SPI_INTSTAT_RXOV_MASK                    (0x4U)
#define SPI_INTSTAT_RXOV_SHIFT                   (2U)
/*! RXOV - Receiver Overrun interrupt flag.
 */
#define SPI_INTSTAT_RXOV(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_RXOV_SHIFT)) & SPI_INTSTAT_RXOV_MASK)
#define SPI_INTSTAT_TXUR_MASK                    (0x8U)
#define SPI_INTSTAT_TXUR_SHIFT                   (3U)
/*! TXUR - Transmitter Underrun interrupt flag.
 */
#define SPI_INTSTAT_TXUR(x)                      (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_TXUR_SHIFT)) & SPI_INTSTAT_TXUR_MASK)
#define SPI_INTSTAT_SSA_MASK                     (0x10U)
#define SPI_INTSTAT_SSA_SHIFT                    (4U)
/*! SSA - Slave Select Assert.
 */
#define SPI_INTSTAT_SSA(x)                       (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_SSA_SHIFT)) & SPI_INTSTAT_SSA_MASK)
#define SPI_INTSTAT_SSD_MASK                     (0x20U)
#define SPI_INTSTAT_SSD_SHIFT                    (5U)
/*! SSD - Slave Select Deassert.
 */
#define SPI_INTSTAT_SSD(x)                       (((uint32_t)(((uint32_t)(x)) << SPI_INTSTAT_SSD_SHIFT)) & SPI_INTSTAT_SSD_MASK)
/*! @} */


/*!
 * @}
 */ /* end of group SPI_Register_Masks */


/* SPI - Peripheral instance base addresses */
/** Peripheral SPI0 base address */
#define SPI0_BASE                                (0x40058000u)
/** Peripheral SPI0 base pointer */
#define SPI0                                     ((SPI_Type *)SPI0_BASE)
/** Array initializer of SPI peripheral base addresses */
#define SPI_BASE_ADDRS                           { SPI0_BASE }
/** Arr