1
2
3
4
5
|
//! Generated file, do not edit by hand, see `xtask/src/codegen`
use crate::completions::attribute::LintCompletion;
pub (super) const FEATURES : & [LintCompletion] = & [LintCompletion { label : "non_ascii_idents" , description : "# `non_ascii_idents`\n\nThe tracking issue for this feature is: [#55467]\n\n[#55467]: https://github.com/rust-lang/rust/issues/55467\n\n------------------------\n\nThe `non_ascii_idents` feature adds support for non-ASCII identifiers.\n\n## Examples\n\n```rust\n#![feature(non_ascii_idents)]\n\nconst ε: f64 = 0.00001f64;\nconst Π: f64 = 3.14f64;\n```\n\n## Changes to the language reference\n\n> **<sup>Lexer:<sup>** \n> IDENTIFIER : \n> XID_start XID_continue<sup>\\*</sup> \n> | `_` XID_continue<sup>+</sup> \n\nAn identifier is any nonempty Unicode string of the following form:\n\nEither\n\n * The first character has property [`XID_start`]\n * The remaining characters have property [`XID_continue`]\n\nOr\n\n * The first character is `_`\n * The identifier is more than one character, `_` alone is not an identifier\n * The remaining characters have property [`XID_continue`]\n\nthat does _not_ occur in the set of [strict keywords].\n\n> **Note**: [`XID_start`] and [`XID_continue`] as character properties cover the\n> character ranges used to form the more familiar C and Java language-family\n> identifiers.\n\n[`XID_start`]: http://unicode.org/cldr/utility/list-unicodeset.jsp?a=%5B%3AXID_Start%3A%5D&abb=on&g=&i=\n[`XID_continue`]: http://unicode.org/cldr/utility/list-unicodeset.jsp?a=%5B%3AXID_Continue%3A%5D&abb=on&g=&i=\n[strict keywords]: ../../reference/keywords.md#strict-keywords\n" } , LintCompletion { label : "custom_test_frameworks" , description : "# `custom_test_frameworks`\n\nThe tracking issue for this feature is: [#50297]\n\n[#50297]: https://github.com/rust-lang/rust/issues/50297\n\n------------------------\n\nThe `custom_test_frameworks` feature allows the use of `#[test_case]` and `#![test_runner]`.\nAny function, const, or static can be annotated with `#[test_case]` causing it to be aggregated (like `#[test]`)\nand be passed to the test runner determined by the `#![test_runner]` crate attribute.\n\n```rust\n#![feature(custom_test_frameworks)]\n#![test_runner(my_runner)]\n\nfn my_runner(tests: &[&i32]) {\n for t in tests {\n if **t == 0 {\n println!(\"PASSED\");\n } else {\n println!(\"FAILED\");\n }\n }\n}\n\n#[test_case]\nconst WILL_PASS: i32 = 0;\n\n#[test_case]\nconst WILL_FAIL: i32 = 4;\n```\n\n" } , LintCompletion { label : "abi_msp430_interrupt" , description : "# `abi_msp430_interrupt`\n\nThe tracking issue for this feature is: [#38487]\n\n[#38487]: https://github.com/rust-lang/rust/issues/38487\n\n------------------------\n\nIn the MSP430 architecture, interrupt handlers have a special calling\nconvention. You can use the `\"msp430-interrupt\"` ABI to make the compiler apply\nthe right calling convention to the interrupt handlers you define.\n\n<!-- NOTE(ignore) this example is specific to the msp430 target -->\n\n``` rust,ignore\n#![feature(abi_msp430_interrupt)]\n#![no_std]\n\n// Place the interrupt handler at the appropriate memory address\n// (Alternatively, you can use `#[used]` and remove `pub` and `#[no_mangle]`)\n#[link_section = \"__interrupt_vector_10\"]\n#[no_mangle]\npub static TIM0_VECTOR: extern \"msp430-interrupt\" fn() = tim0;\n\n// The interrupt handler\nextern \"msp430-interrupt\" fn tim0() {\n // ..\n}\n```\n\n``` text\n$ msp430-elf-objdump -CD ./target/msp430/release/app\nDisassembly of section __interrupt_vector_10:\n\n0000fff2 <TIM0_VECTOR>:\n fff2: 00 c0 interrupt service routine at 0xc000\n\nDisassembly of section .text:\n\n0000c000 <int::tim0>:\n c000: 00 13 reti\n```\n" } , LintCompletion { label : "link_args" , description : "# `link_args`\n\nThe tracking issue for this feature is: [#29596]\n\n[#29596]: https://github.com/rust-lang/rust/issues/29596\n\n------------------------\n\nYou can tell `rustc` how to customize linking, and that is via the `link_args`\nattribute. This attribute is applied to `extern` blocks and specifies raw flags\nwhich need to get passed to the linker when producing an artifact. An example\nusage would be:\n\n```rust,no_run\n#![feature(link_args)]\n\n#[link_args = \"-foo -bar -baz\"]\nextern {}\n# fn main() {}\n```\n\nNote that this feature is currently hidden behind the `feature(link_args)` gate\nbecause this is not a sanctioned way of performing linking. Right now `rustc`\nshells out to the system linker (`gcc` on most systems, `link.exe` on MSVC), so\nit makes sense to provide extra command line arguments, but this will not\nalways be the case. In the future `rustc` may use LLVM directly to link native\nlibraries, in which case `link_args` will have no meaning. You can achieve the\nsame effect as the `link_args` attribute with the `-C link-args` argument to\n`rustc`.\n\nIt is highly recommended to *not* use this attribute, and rather use the more\nformal `#[link(...)]` attribute on `extern` blocks instead.\n" } , LintCompletion { label : "const_eval_limit" , description : "# `const_eval_limit`\n\nThe tracking issue for this feature is: [#67217]\n\n[#67217]: https://github.com/rust-lang/rust/issues/67217\n\nThe `const_eval_limit` allows someone to limit the evaluation steps the CTFE undertakes to evaluate a `const fn`.\n" } , LintCompletion { label : "marker_trait_attr" , description : "# `marker_trait_attr`\n\nThe tracking issue for this feature is: [#29864]\n\n[#29864]: https://github.com/rust-lang/rust/issues/29864\n\n------------------------\n\nNormally, Rust keeps you from adding trait implementations that could\noverlap with each other, as it would be ambiguous which to use. This\nfeature, however, carves out an exception to that rule: a trait can\nopt-in to having overlapping implementations, at the cost that those\nimplementations are not allowed to override anything (and thus the\ntrait itself cannot have any associated items, as they're pointless\nwhen they'd need to do the same thing for every type anyway).\n\n```rust\n#![feature(marker_trait_attr)]\n\n#[marker] trait CheapToClone: Clone {}\n\nimpl<T: Copy> CheapToClone for T {}\n\n// These could potentially overlap with the blanket implementation above,\n// so are only allowed because CheapToClone is a marker trait.\nimpl<T: CheapToClone, U: CheapToClone> CheapToClone for (T, U) {}\nimpl<T: CheapToClone> CheapToClone for std::ops::Range<T> {}\n\nfn cheap_clone<T: CheapToClone>(t: T) -> T {\n t.clone()\n}\n```\n\nThis is expected to replace the unstable `overlapping_marker_traits`\nfeature, which applied to all empty traits (without needing an opt-in).\n" } , LintCompletion { label : "ffi_const" , description : "# `ffi_const`\n\nThe tracking issue for this feature is: [#58328]\n\n------\n\nThe `#[ffi_const]` attribute applies clang's `const` attribute to foreign\nfunctions declarations.\n\nThat is, `#[ffi_const]` functions shall have no effects except for its return\nvalue, which can only depend on the values of the function parameters, and is\nnot affected by changes to the observable state of the program.\n\nApplying the `#[ffi_const]` attribute to a function that violates these\nrequirements is undefined behaviour.\n\nThis attribute enables Rust to perform common optimizations, like sub-expression\nelimination, and it can avoid emitting some calls in repeated invocations of the\nfunction with the same argument values regardless of other operations being\nperformed in between these functions calls (as opposed to `#[ffi_pure]`\nfunctions).\n\n## Pitfalls\n\nA `#[ffi_const]` function can only read global memory that would not affect\nits return value for the whole execution of the program (e.g. immutable global\nmemory). `#[ffi_const]` functions are referentially-transparent and therefore\nmore strict than `#[ffi_pure]` functions.\n\nA common pitfall involves applying the `#[ffi_const]` attribute to a\nfunction that reads memory through pointer arguments which do not necessarily\npoint to immutable global memory.\n\nA `#[ffi_const]` function that returns unit has no effect on the abstract\nmachine's state, and a `#[ffi_const]` function cannot be `#[ffi_pure]`.\n\nA `#[ffi_const]` function must not diverge, neither via a side effect (e.g. a\ncall to `abort`) nor by infinite loops.\n\nWhen translating C headers to Rust FFI, it is worth verifying for which targets\nthe `const` attribute is enabled in those headers, and using the appropriate\n`cfg` macros in the Rust side to match those definitions. While the semantics of\n`const` are implemented identically by many C and C++ compilers, e.g., clang,\n[GCC], [ARM C/C++ compiler], [IBM ILE C/C++], etc. they are not necessarily\nimplemented in this way on all of them. It is therefore also worth verifying\nthat the semantics of the C toolchain used to compile the binary being linked\nagainst are compatible with those of the `#[ffi_const]`.\n\n[#58328]: https://github.com/rust-lang/rust/issues/58328\n[ARM C/C++ compiler]: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0491c/Cacgigch.html\n[GCC]: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-const-function-attribute\n[IBM ILE C/C++]: https://www.ibm.com/support/knowledgecenter/fr/ssw_ibm_i_71/rzarg/fn_attrib_const.htm\n" } , LintCompletion { label : "doc_spotlight" , description : "# `doc_spotlight`\n\nThe tracking issue for this feature is: [#45040]\n\nThe `doc_spotlight` feature allows the use of the `spotlight` parameter to the `#[doc]` attribute,\nto \"spotlight\" a specific trait on the return values of functions. Adding a `#[doc(spotlight)]`\nattribute to a trait definition will make rustdoc print extra information for functions which return\na type that implements that trait. This attribute is applied to the `Iterator`, `io::Read`, and\n`io::Write` traits in the standard library.\n\nYou can do this on your own traits, like this:\n\n```\n#![feature(doc_spotlight)]\n\n#[doc(spotlight)]\npub trait MyTrait {}\n\npub struct MyStruct;\nimpl MyTrait for MyStruct {}\n\n/// The docs for this function will have an extra line about `MyStruct` implementing `MyTrait`,\n/// without having to write that yourself!\npub fn my_fn() -> MyStruct { MyStruct }\n```\n\nThis feature was originally implemented in PR [#45039].\n\n[#45040]: https://github.com/rust-lang/rust/issues/45040\n[#45039]: https://github.com/rust-lang/rust/pull/45039\n" } , LintCompletion { label : "compiler_builtins" , description : "# `compiler_builtins`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "lang_items" , description : "# `lang_items`\n\nThe tracking issue for this feature is: None.\n\n------------------------\n\nThe `rustc` compiler has certain pluggable operations, that is,\nfunctionality that isn't hard-coded into the language, but is\nimplemented in libraries, with a special marker to tell the compiler\nit exists. The marker is the attribute `#[lang = \"...\"]` and there are\nvarious different values of `...`, i.e. various different 'lang\nitems'.\n\nFor example, `Box` pointers require two lang items, one for allocation\nand one for deallocation. A freestanding program that uses the `Box`\nsugar for dynamic allocations via `malloc` and `free`:\n\n```rust,ignore\n#![feature(lang_items, box_syntax, start, libc, core_intrinsics)]\n#![no_std]\nuse core::intrinsics;\nuse core::panic::PanicInfo;\n\nextern crate libc;\n\n#[lang = \"owned_box\"]\npub struct Box<T>(*mut T);\n\n#[lang = \"exchange_malloc\"]\nunsafe fn allocate(size: usize, _align: usize) -> *mut u8 {\n let p = libc::malloc(size as libc::size_t) as *mut u8;\n\n // Check if `malloc` failed:\n if p as usize == 0 {\n intrinsics::abort();\n }\n\n p\n}\n\n#[lang = \"box_free\"]\nunsafe fn box_free<T: ?Sized>(ptr: *mut T) {\n libc::free(ptr as *mut libc::c_void)\n}\n\n#[start]\nfn main(_argc: isize, _argv: *const *const u8) -> isize {\n let _x = box 1;\n\n 0\n}\n\n#[lang = \"eh_personality\"] extern fn rust_eh_personality() {}\n#[lang = \"panic_impl\"] extern fn rust_begin_panic(info: &PanicInfo) -> ! { unsafe { intrinsics::abort() } }\n#[no_mangle] pub extern fn rust_eh_register_frames () {}\n#[no_mangle] pub extern fn rust_eh_unregister_frames () {}\n```\n\nNote the use of `abort`: the `exchange_malloc` lang item is assumed to\nreturn a valid pointer, and so needs to do the check internally.\n\nOther features provided by lang items include:\n\n- overloadable operators via traits: the traits corresponding to the\n `==`, `<`, dereferencing (`*`) and `+` (etc.) operators are all\n marked with lang items; those specific four are `eq`, `ord`,\n `deref`, and `add` respectively.\n- stack unwinding and general failure; the `eh_personality`,\n `panic` and `panic_bounds_checks` lang items.\n- the traits in `std::marker` used to indicate types of\n various kinds; lang items `send`, `sync` and `copy`.\n- the marker types and variance indicators found in\n `std::marker`; lang items `covariant_type`,\n `contravariant_lifetime`, etc.\n\nLang items are loaded lazily by the compiler; e.g. if one never uses\n`Box` then there is no need to define functions for `exchange_malloc`\nand `box_free`. `rustc` will emit an error when an item is needed\nbut not found in the current crate or any that it depends on.\n\nMost lang items are defined by `libcore`, but if you're trying to build\nan executable without the standard library, you'll run into the need\nfor lang items. The rest of this page focuses on this use-case, even though\nlang items are a bit broader than that.\n\n### Using libc\n\nIn order to build a `#[no_std]` executable we will need libc as a dependency.\nWe can specify this using our `Cargo.toml` file:\n\n```toml\n[dependencies]\nlibc = { version = \"0.2.14\", default-features = false }\n```\n\nNote that the default features have been disabled. This is a critical step -\n**the default features of libc include the standard library and so must be\ndisabled.**\n\n### Writing an executable without stdlib\n\nControlling the entry point is possible in two ways: the `#[start]` attribute,\nor overriding the default shim for the C `main` function with your own.\n\nThe function marked `#[start]` is passed the command line parameters\nin the same format as C:\n\n```rust,ignore\n#![feature(lang_items, core_intrinsics)]\n#![feature(start)]\n#![no_std]\nuse core::intrinsics;\nuse core::panic::PanicInfo;\n\n// Pull in the system libc library for what crt0.o likely requires.\nextern crate libc;\n\n// Entry point for this program.\n#[start]\nfn start(_argc: isize, _argv: *const *const u8) -> isize {\n 0\n}\n\n// These functions are used by the compiler, but not\n// for a bare-bones hello world. These are normally\n// provided by libstd.\n#[lang = \"eh_personality\"]\n#[no_mangle]\npub extern fn rust_eh_personality() {\n}\n\n#[lang = \"panic_impl\"]\n#[no_mangle]\npub extern fn rust_begin_panic(info: &PanicInfo) -> ! {\n unsafe { intrinsics::abort() }\n}\n```\n\nTo override the compiler-inserted `main` shim, one has to disable it\nwith `#![no_main]` and then create the appropriate symbol with the\ncorrect ABI and the correct name, which requires overriding the\ncompiler's name mangling too:\n\n```rust,ignore\n#![feature(lang_items, core_intrinsics)]\n#![feature(start)]\n#![no_std]\n#![no_main]\nuse core::intrinsics;\nuse core::panic::PanicInfo;\n\n// Pull in the system libc library for what crt0.o likely requires.\nextern crate libc;\n\n// Entry point for this program.\n#[no_mangle] // ensure that this symbol is called `main` in the output\npub extern fn main(_argc: i32, _argv: *const *const u8) -> i32 {\n 0\n}\n\n// These functions are used by the compiler, but not\n// for a bare-bones hello world. These are normally\n// provided by libstd.\n#[lang = \"eh_personality\"]\n#[no_mangle]\npub extern fn rust_eh_personality() {\n}\n\n#[lang = \"panic_impl\"]\n#[no_mangle]\npub extern fn rust_begin_panic(info: &PanicInfo) -> ! {\n unsafe { intrinsics::abort() }\n}\n```\n\nIn many cases, you may need to manually link to the `compiler_builtins` crate\nwhen building a `no_std` binary. You may observe this via linker error messages\nsuch as \"```undefined reference to `__rust_probestack'```\".\n\n## More about the language items\n\nThe compiler currently makes a few assumptions about symbols which are\navailable in the executable to call. Normally these functions are provided by\nthe standard library, but without it you must define your own. These symbols\nare called \"language items\", and they each have an internal name, and then a\nsignature that an implementation must conform to.\n\nThe first of these functions, `rust_eh_personality`, is used by the failure\nmechanisms of the compiler. This is often mapped to GCC's personality function\n(see the [libstd implementation][unwind] for more information), but crates\nwhich do not trigger a panic can be assured that this function is never\ncalled. The language item's name is `eh_personality`.\n\n[unwind]: https://github.com/rust-lang/rust/blob/master/src/libpanic_unwind/gcc.rs\n\nThe second function, `rust_begin_panic`, is also used by the failure mechanisms of the\ncompiler. When a panic happens, this controls the message that's displayed on\nthe screen. While the language item's name is `panic_impl`, the symbol name is\n`rust_begin_panic`.\n\nFinally, a `eh_catch_typeinfo` static is needed for certain targets which\nimplement Rust panics on top of C++ exceptions.\n\n## List of all language items\n\nThis is a list of all language items in Rust along with where they are located in\nthe source code.\n\n- Primitives\n - `i8`: `libcore/num/mod.rs`\n - `i16`: `libcore/num/mod.rs`\n - `i32`: `libcore/num/mod.rs`\n - `i64`: `libcore/num/mod.rs`\n - `i128`: `libcore/num/mod.rs`\n - `isize`: `libcore/num/mod.rs`\n - `u8`: `libcore/num/mod.rs`\n - `u16`: `libcore/num/mod.rs`\n - `u32`: `libcore/num/mod.rs`\n - `u64`: `libcore/num/mod.rs`\n - `u128`: `libcore/num/mod.rs`\n - `usize`: `libcore/num/mod.rs`\n - `f32`: `libstd/f32.rs`\n - `f64`: `libstd/f64.rs`\n - `char`: `libcore/char.rs`\n - `slice`: `liballoc/slice.rs`\n - `str`: `liballoc/str.rs`\n - `const_ptr`: `libcore/ptr.rs`\n - `mut_ptr`: `libcore/ptr.rs`\n - `unsafe_cell`: `libcore/cell.rs`\n- Runtime\n - `start`: `libstd/rt.rs`\n - `eh_personality`: `libpanic_unwind/emcc.rs` (EMCC)\n - `eh_personality`: `libpanic_unwind/gcc.rs` (GNU)\n - `eh_personality`: `libpanic_unwind/seh.rs` (SEH)\n - `eh_catch_typeinfo`: `libpanic_unwind/emcc.rs` (EMCC)\n - `panic`: `libcore/panicking.rs`\n - `panic_bounds_check`: `libcore/panicking.rs`\n - `panic_impl`: `libcore/panicking.rs`\n - `panic_impl`: `libstd/panicking.rs`\n- Allocations\n - `owned_box`: `liballoc/boxed.rs`\n - `exchange_malloc`: `liballoc/heap.rs`\n - `box_free`: `liballoc/heap.rs`\n- Operands\n - `not`: `libcore/ops/bit.rs`\n - `bitand`: `libcore/ops/bit.rs`\n - `bitor`: `libcore/ops/bit.rs`\n - `bitxor`: `libcore/ops/bit.rs`\n - `shl`: `libcore/ops/bit.rs`\n - `shr`: `libcore/ops/bit.rs`\n - `bitand_assign`: `libcore/ops/bit.rs`\n - `bitor_assign`: `libcore/ops/bit.rs`\n - `bitxor_assign`: `libcore/ops/bit.rs`\n - `shl_assign`: `libcore/ops/bit.rs`\n - `shr_assign`: `libcore/ops/bit.rs`\n - `deref`: `libcore/ops/deref.rs`\n - `deref_mut`: `libcore/ops/deref.rs`\n - `index`: `libcore/ops/index.rs`\n - `index_mut`: `libcore/ops/index.rs`\n - `add`: `libcore/ops/arith.rs`\n - `sub`: `libcore/ops/arith.rs`\n - `mul`: `libcore/ops/arith.rs`\n - `div`: `libcore/ops/arith.rs`\n - `rem`: `libcore/ops/arith.rs`\n - `neg`: `libcore/ops/arith.rs`\n - `add_assign`: `libcore/ops/arith.rs`\n - `sub_assign`: `libcore/ops/arith.rs`\n - `mul_assign`: `libcore/ops/arith.rs`\n - `div_assign`: `libcore/ops/arith.rs`\n - `rem_assign`: `libcore/ops/arith.rs`\n - `eq`: `libcore/cmp.rs`\n - `ord`: `libcore/cmp.rs`\n- Functions\n - `fn`: `libcore/ops/function.rs`\n - `fn_mut`: `libcore/ops/function.rs`\n - `fn_once`: `libcore/ops/function.rs`\n - `generator_state`: `libcore/ops/generator.rs`\n - `generator`: `libcore/ops/generator.rs`\n- Other\n - `coerce_unsized`: `libcore/ops/unsize.rs`\n - `drop`: `libcore/ops/drop.rs`\n - `drop_in_place`: `libcore/ptr.rs`\n - `clone`: `libcore/clone.rs`\n - `copy`: `libcore/marker.rs`\n - `send`: `libcore/marker.rs`\n - `sized`: `libcore/marker.rs`\n - `unsize`: `libcore/marker.rs`\n - `sync`: `libcore/marker.rs`\n - `phantom_data`: `libcore/marker.rs`\n - `discriminant_kind`: `libcore/marker.rs`\n - `freeze`: `libcore/marker.rs`\n - `debug_trait`: `libcore/fmt/mod.rs`\n - `non_zero`: `libcore/nonzero.rs`\n - `arc`: `liballoc/sync.rs`\n - `rc`: `liballoc/rc.rs`\n" } , LintCompletion { label : "member_constraints" , description : "# `member_constraints`\n\nThe tracking issue for this feature is: [#61997]\n\n[#61997]: https://github.com/rust-lang/rust/issues/61997\n\n------------------------\n\nThe `member_constraints` feature gate lets you use `impl Trait` syntax with\nmultiple unrelated lifetime parameters.\n\nA simple example is:\n\n```rust\n#![feature(member_constraints)]\n\ntrait Trait<'a, 'b> { }\nimpl<T> Trait<'_, '_> for T {}\n\nfn foo<'a, 'b>(x: &'a u32, y: &'b u32) -> impl Trait<'a, 'b> {\n (x, y)\n}\n\nfn main() { }\n```\n\nWithout the `member_constraints` feature gate, the above example is an\nerror because both `'a` and `'b` appear in the impl Trait bounds, but\nneither outlives the other.\n" } , LintCompletion { label : "crate_visibility_modifier" , description : "# `crate_visibility_modifier`\n\nThe tracking issue for this feature is: [#53120]\n\n[#53120]: https://github.com/rust-lang/rust/issues/53120\n\n-----\n\nThe `crate_visibility_modifier` feature allows the `crate` keyword to be used\nas a visibility modifier synonymous to `pub(crate)`, indicating that a type\n(function, _&c._) is to be visible to the entire enclosing crate, but not to\nother crates.\n\n```rust\n#![feature(crate_visibility_modifier)]\n\ncrate struct Foo {\n bar: usize,\n}\n```\n" } , LintCompletion { label : "try_blocks" , description : "# `try_blocks`\n\nThe tracking issue for this feature is: [#31436]\n\n[#31436]: https://github.com/rust-lang/rust/issues/31436\n\n------------------------\n\nThe `try_blocks` feature adds support for `try` blocks. A `try`\nblock creates a new scope one can use the `?` operator in.\n\n```rust,edition2018\n#![feature(try_blocks)]\n\nuse std::num::ParseIntError;\n\nlet result: Result<i32, ParseIntError> = try {\n \"1\".parse::<i32>()?\n + \"2\".parse::<i32>()?\n + \"3\".parse::<i32>()?\n};\nassert_eq!(result, Ok(6));\n\nlet result: Result<i32, ParseIntError> = try {\n \"1\".parse::<i32>()?\n + \"foo\".parse::<i32>()?\n + \"3\".parse::<i32>()?\n};\nassert!(result.is_err());\n```\n" } , LintCompletion { label : "const_in_array_repeat_expressions" , description : "# `const_in_array_repeat_expressions`\n\nThe tracking issue for this feature is: [#49147]\n\n[#49147]: https://github.com/rust-lang/rust/issues/49147\n\n------------------------\n\nRelaxes the rules for repeat expressions, `[x; N]` such that `x` may also be `const` (strictly\nspeaking rvalue promotable), in addition to `typeof(x): Copy`. The result of `[x; N]` where `x` is\n`const` is itself also `const`.\n" } , LintCompletion { label : "negative_impls" , description : "# `negative_impls`\n\nThe tracking issue for this feature is [#68318].\n\n[#68318]: https://github.com/rust-lang/rust/issues/68318\n\n----\n\nWith the feature gate `negative_impls`, you can write negative impls as well as positive ones:\n\n```rust\n#![feature(negative_impls)]\ntrait DerefMut { }\nimpl<T: ?Sized> !DerefMut for &T { }\n```\n\nNegative impls indicate a semver guarantee that the given trait will not be implemented for the given types. Negative impls play an additional purpose for auto traits, described below.\n\nNegative impls have the following characteristics:\n\n* They do not have any items.\n* They must obey the orphan rules as if they were a positive impl.\n* They cannot \"overlap\" with any positive impls.\n\n## Semver interaction\n\nIt is a breaking change to remove a negative impl. Negative impls are a commitment not to implement the given trait for the named types.\n\n## Orphan and overlap rules\n\nNegative impls must obey the same orphan rules as a positive impl. This implies you cannot add a negative impl for types defined in upstream crates and so forth.\n\nSimilarly, negative impls cannot overlap with positive impls, again using the same \"overlap\" check that we ordinarily use to determine if two impls overlap. (Note that positive impls typically cannot overlap with one another either, except as permitted by specialization.)\n\n## Interaction with auto traits\n\nDeclaring a negative impl `impl !SomeAutoTrait for SomeType` for an\nauto-trait serves two purposes:\n\n* as with any trait, it declares that `SomeType` will never implement `SomeAutoTrait`;\n* it disables the automatic `SomeType: SomeAutoTrait` impl that would otherwise have been generated.\n\nNote that, at present, there is no way to indicate that a given type\ndoes not implement an auto trait *but that it may do so in the\nfuture*. For ordinary types, this is done by simply not declaring any\nimpl at all, but that is not an option for auto traits. A workaround\nis that one could embed a marker type as one of the fields, where the\nmarker type is `!AutoTrait`.\n\n## Immediate uses\n\nNegative impls are used to declare that `&T: !DerefMut` and `&mut T: !Clone`, as required to fix the soundness of `Pin` described in [#66544](https://github.com/rust-lang/rust/issues/66544).\n\nThis serves two purposes:\n\n* For proving the correctness of unsafe code, we can use that impl as evidence that no `DerefMut` or `Clone` impl exists.\n* It prevents downstream crates from creating such impls.\n" } , LintCompletion { label : "c_variadic" , description : "# `c_variadic`\n\nThe tracking issue for this feature is: [#44930]\n\n[#44930]: https://github.com/rust-lang/rust/issues/44930\n\n------------------------\n\nThe `c_variadic` language feature enables C-variadic functions to be\ndefined in Rust. The may be called both from within Rust and via FFI.\n\n## Examples\n\n```rust\n#![feature(c_variadic)]\n\npub unsafe extern \"C\" fn add(n: usize, mut args: ...) -> usize {\n let mut sum = 0;\n for _ in 0..n {\n sum += args.arg::<usize>();\n }\n sum\n}\n```\n" } , LintCompletion { label : "profiler_runtime" , description : "# `profiler_runtime`\n\nThe tracking issue for this feature is: [#42524](https://github.com/rust-lang/rust/issues/42524).\n\n------------------------\n" } , LintCompletion { label : "box_syntax" , description : "# `box_syntax`\n\nThe tracking issue for this feature is: [#49733]\n\n[#49733]: https://github.com/rust-lang/rust/issues/49733\n\nSee also [`box_patterns`](box-patterns.md)\n\n------------------------\n\nCurrently the only stable way to create a `Box` is via the `Box::new` method.\nAlso it is not possible in stable Rust to destructure a `Box` in a match\npattern. The unstable `box` keyword can be used to create a `Box`. An example\nusage would be:\n\n```rust\n#![feature(box_syntax)]\n\nfn main() {\n let b = box 5;\n}\n```\n" } , LintCompletion { label : "ffi_pure" , description : "# `ffi_pure`\n\nThe tracking issue for this feature is: [#58329]\n\n------\n\nThe `#[ffi_pure]` attribute applies clang's `pure` attribute to foreign\nfunctions declarations.\n\nThat is, `#[ffi_pure]` functions shall have no effects except for its return\nvalue, which shall not change across two consecutive function calls with\nthe same parameters.\n\nApplying the `#[ffi_pure]` attribute to a function that violates these\nrequirements is undefined behavior.\n\nThis attribute enables Rust to perform common optimizations, like sub-expression\nelimination and loop optimizations. Some common examples of pure functions are\n`strlen` or `memcmp`.\n\nThese optimizations are only applicable when the compiler can prove that no\nprogram state observable by the `#[ffi_pure]` function has changed between calls\nof the function, which could alter the result. See also the `#[ffi_const]`\nattribute, which provides stronger guarantees regarding the allowable behavior\nof a function, enabling further optimization.\n\n## Pitfalls\n\nA `#[ffi_pure]` function can read global memory through the function\nparameters (e.g. pointers), globals, etc. `#[ffi_pure]` functions are not\nreferentially-transparent, and are therefore more relaxed than `#[ffi_const]`\nfunctions.\n\nHowever, accesing global memory through volatile or atomic reads can violate the\nrequirement that two consecutive function calls shall return the same value.\n\nA `pure` function that returns unit has no effect on the abstract machine's\nstate.\n\nA `#[ffi_pure]` function must not diverge, neither via a side effect (e.g. a\ncall to `abort`) nor by infinite loops.\n\nWhen translating C headers to Rust FFI, it is worth verifying for which targets\nthe `pure` attribute is enabled in those headers, and using the appropriate\n`cfg` macros in the Rust side to match those definitions. While the semantics of\n`pure` are implemented identically by many C and C++ compilers, e.g., clang,\n[GCC], [ARM C/C++ compiler], [IBM ILE C/C++], etc. they are not necessarily\nimplemented in this way on all of them. It is therefore also worth verifying\nthat the semantics of the C toolchain used to compile the binary being linked\nagainst are compatible with those of the `#[ffi_pure]`.\n\n\n[#58329]: https://github.com/rust-lang/rust/issues/58329\n[ARM C/C++ compiler]: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0491c/Cacigdac.html\n[GCC]: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-pure-function-attribute\n[IBM ILE C/C++]: https://www.ibm.com/support/knowledgecenter/fr/ssw_ibm_i_71/rzarg/fn_attrib_pure.htm\n" } , LintCompletion { label : "arbitrary_enum_discriminant" , description : "# `arbitrary_enum_discriminant`\n\nThe tracking issue for this feature is: [#60553]\n\n[#60553]: https://github.com/rust-lang/rust/issues/60553\n\n------------------------\n\nThe `arbitrary_enum_discriminant` feature permits tuple-like and\nstruct-like enum variants with `#[repr(<int-type>)]` to have explicit discriminants.\n\n## Examples\n\n```rust\n#![feature(arbitrary_enum_discriminant)]\n\n#[allow(dead_code)]\n#[repr(u8)]\nenum Enum {\n Unit = 3,\n Tuple(u16) = 2,\n Struct {\n a: u8,\n b: u16,\n } = 1,\n}\n\nimpl Enum {\n fn tag(&self) -> u8 {\n unsafe { *(self as *const Self as *const u8) }\n }\n}\n\nassert_eq!(3, Enum::Unit.tag());\nassert_eq!(2, Enum::Tuple(5).tag());\nassert_eq!(1, Enum::Struct{a: 7, b: 11}.tag());\n```\n" } , LintCompletion { label : "unsized_locals" , description : "# `unsized_locals`\n\nThe tracking issue for this feature is: [#48055]\n\n[#48055]: https://github.com/rust-lang/rust/issues/48055\n\n------------------------\n\nThis implements [RFC1909]. When turned on, you can have unsized arguments and locals:\n\n[RFC1909]: https://github.com/rust-lang/rfcs/blob/master/text/1909-unsized-rvalues.md\n\n```rust\n#![feature(unsized_locals)]\n\nuse std::any::Any;\n\nfn main() {\n let x: Box<dyn Any> = Box::new(42);\n let x: dyn Any = *x;\n // ^ unsized local variable\n // ^^ unsized temporary\n foo(x);\n}\n\nfn foo(_: dyn Any) {}\n// ^^^^^^ unsized argument\n```\n\nThe RFC still forbids the following unsized expressions:\n\n```rust,ignore\n#![feature(unsized_locals)]\n\nuse std::any::Any;\n\nstruct MyStruct<T: ?Sized> {\n content: T,\n}\n\nstruct MyTupleStruct<T: ?Sized>(T);\n\nfn answer() -> Box<dyn Any> {\n Box::new(42)\n}\n\nfn main() {\n // You CANNOT have unsized statics.\n static X: dyn Any = *answer(); // ERROR\n const Y: dyn Any = *answer(); // ERROR\n\n // You CANNOT have struct initialized unsized.\n MyStruct { content: *answer() }; // ERROR\n MyTupleStruct(*answer()); // ERROR\n (42, *answer()); // ERROR\n\n // You CANNOT have unsized return types.\n fn my_function() -> dyn Any { *answer() } // ERROR\n\n // You CAN have unsized local variables...\n let mut x: dyn Any = *answer(); // OK\n // ...but you CANNOT reassign to them.\n x = *answer(); // ERROR\n\n // You CANNOT even initialize them separately.\n let y: dyn Any; // OK\n y = *answer(); // ERROR\n\n // Not mentioned in the RFC, but by-move captured variables are also Sized.\n let x: dyn Any = *answer();\n (move || { // ERROR\n let y = x;\n })();\n\n // You CAN create a closure with unsized arguments,\n // but you CANNOT call it.\n // This is an implementation detail and may be changed in the future.\n let f = |x: dyn Any| {};\n f(*answer()); // ERROR\n}\n```\n\n## By-value trait objects\n\nWith this feature, you can have by-value `self` arguments without `Self: Sized` bounds.\n\n```rust\n#![feature(unsized_locals)]\n\ntrait Foo {\n fn foo(self) {}\n}\n\nimpl<T: ?Sized> Foo for T {}\n\nfn main() {\n let slice: Box<[i32]> = Box::new([1, 2, 3]);\n <[i32] as Foo>::foo(*slice);\n}\n```\n\nAnd `Foo` will also be object-safe.\n\n```rust\n#![feature(unsized_locals)]\n\ntrait Foo {\n fn foo(self) {}\n}\n\nimpl<T: ?Sized> Foo for T {}\n\nfn main () {\n let slice: Box<dyn Foo> = Box::new([1, 2, 3]);\n // doesn't compile yet\n <dyn Foo as Foo>::foo(*slice);\n}\n```\n\nOne of the objectives of this feature is to allow `Box<dyn FnOnce>`.\n\n## Variable length arrays\n\nThe RFC also describes an extension to the array literal syntax: `[e; dyn n]`. In the syntax, `n` isn't necessarily a constant expression. The array is dynamically allocated on the stack and has the type of `[T]`, instead of `[T; n]`.\n\n```rust,ignore\n#![feature(unsized_locals)]\n\nfn mergesort<T: Ord>(a: &mut [T]) {\n let mut tmp = [T; dyn a.len()];\n // ...\n}\n\nfn main() {\n let mut a = [3, 1, 5, 6];\n mergesort(&mut a);\n assert_eq!(a, [1, 3, 5, 6]);\n}\n```\n\nVLAs are not implemented yet. The syntax isn't final, either. We may need an alternative syntax for Rust 2015 because, in Rust 2015, expressions like `[e; dyn(1)]` would be ambiguous. One possible alternative proposed in the RFC is `[e; n]`: if `n` captures one or more local variables, then it is considered as `[e; dyn n]`.\n\n## Advisory on stack usage\n\nIt's advised not to casually use the `#![feature(unsized_locals)]` feature. Typical use-cases are:\n\n- When you need a by-value trait objects.\n- When you really need a fast allocation of small temporary arrays.\n\nAnother pitfall is repetitive allocation and temporaries. Currently the compiler simply extends the stack frame every time it encounters an unsized assignment. So for example, the code\n\n```rust\n#![feature(unsized_locals)]\n\nfn main() {\n let x: Box<[i32]> = Box::new([1, 2, 3, 4, 5]);\n let _x = {{{{{{{{{{*x}}}}}}}}}};\n}\n```\n\nand the code\n\n```rust\n#![feature(unsized_locals)]\n\nfn main() {\n for _ in 0..10 {\n let x: Box<[i32]> = Box::new([1, 2, 3, 4, 5]);\n let _x = *x;\n }\n}\n```\n\nwill unnecessarily extend the stack frame.\n" } , LintCompletion { label : "cfg_sanitize" , description : "# `cfg_sanitize`\n\nThe tracking issue for this feature is: [#39699]\n\n[#39699]: https://github.com/rust-lang/rust/issues/39699\n\n------------------------\n\nThe `cfg_sanitize` feature makes it possible to execute different code\ndepending on whether a particular sanitizer is enabled or not.\n\n## Examples\n\n```rust\n#![feature(cfg_sanitize)]\n\n#[cfg(sanitize = \"thread\")]\nfn a() {\n // ...\n}\n\n#[cfg(not(sanitize = \"thread\"))]\nfn a() {\n // ...\n}\n\nfn b() {\n if cfg!(sanitize = \"leak\") {\n // ...\n } else {\n // ...\n }\n}\n```\n" } , LintCompletion { label : "cmse_nonsecure_entry" , description : "# `cmse_nonsecure_entry`\n\nThe tracking issue for this feature is: [#75835]\n\n[#75835]: https://github.com/rust-lang/rust/issues/75835\n\n------------------------\n\nThe [TrustZone-M\nfeature](https://developer.arm.com/documentation/100690/latest/) is available\nfor targets with the Armv8-M architecture profile (`thumbv8m` in their target\nname).\nLLVM, the Rust compiler and the linker are providing\n[support](https://developer.arm.com/documentation/ecm0359818/latest/) for the\nTrustZone-M feature.\n\nOne of the things provided, with this unstable feature, is the\n`cmse_nonsecure_entry` attribute. This attribute marks a Secure function as an\nentry function (see [section\n5.4](https://developer.arm.com/documentation/ecm0359818/latest/) for details).\nWith this attribute, the compiler will do the following:\n* add a special symbol on the function which is the `__acle_se_` prefix and the\n standard function name\n* constrain the number of parameters to avoid using the Non-Secure stack\n* before returning from the function, clear registers that might contain Secure\n information\n* use the `BXNS` instruction to return\n\nBecause the stack can not be used to pass parameters, there will be compilation\nerrors if:\n* the total size of all parameters is too big (for example more than four 32\n bits integers)\n* the entry function is not using a C ABI\n\nThe special symbol `__acle_se_` will be used by the linker to generate a secure\ngateway veneer.\n\n<!-- NOTE(ignore) this example is specific to thumbv8m targets -->\n\n``` rust,ignore\n#![feature(cmse_nonsecure_entry)]\n\n#[no_mangle]\n#[cmse_nonsecure_entry]\npub extern \"C\" fn entry_function(input: u32) -> u32 {\n input + 6\n}\n```\n\n``` text\n$ rustc --emit obj --crate-type lib --target thumbv8m.main-none-eabi function.rs\n$ arm-none-eabi-objdump -D function.o\n\n00000000 <entry_function>:\n 0: b580 push {r7, lr}\n 2: 466f mov r7, sp\n 4: b082 sub sp, #8\n 6: 9001 str r0, [sp, #4]\n 8: 1d81 adds r1, r0, #6\n a: 460a mov r2, r1\n c: 4281 cmp r1, r0\n e: 9200 str r2, [sp, #0]\n 10: d30b bcc.n 2a <entry_function+0x2a>\n 12: e7ff b.n 14 <entry_function+0x14>\n 14: 9800 ldr r0, [sp, #0]\n 16: b002 add sp, #8\n 18: e8bd 4080 ldmia.w sp!, {r7, lr}\n 1c: 4671 mov r1, lr\n 1e: 4672 mov r2, lr\n 20: 4673 mov r3, lr\n 22: 46f4 mov ip, lr\n 24: f38e 8800 msr CPSR_f, lr\n 28: 4774 bxns lr\n 2a: f240 0000 movw r0, #0\n 2e: f2c0 0000 movt r0, #0\n 32: f240 0200 movw r2, #0\n 36: f2c0 0200 movt r2, #0\n 3a: 211c movs r1, #28\n 3c: f7ff fffe bl 0 <_ZN4core9panicking5panic17h5c028258ca2fb3f5E>\n 40: defe udf #254 ; 0xfe\n```\n" } , LintCompletion { label : "cfg_version" , description : "# `cfg_version`\n\nThe tracking issue for this feature is: [#64796]\n\n[#64796]: https://github.com/rust-lang/rust/issues/64796\n\n------------------------\n\nThe `cfg_version` feature makes it possible to execute different code\ndepending on the compiler version.\n\n## Examples\n\n```rust\n#![feature(cfg_version)]\n\n#[cfg(version(\"1.42\"))]\nfn a() {\n // ...\n}\n\n#[cfg(not(version(\"1.42\")))]\nfn a() {\n // ...\n}\n\nfn b() {\n if cfg!(version(\"1.42\")) {\n // ...\n } else {\n // ...\n }\n}\n```\n" } , LintCompletion { label : "unsized_tuple_coercion" , description : "# `unsized_tuple_coercion`\n\nThe tracking issue for this feature is: [#42877]\n\n[#42877]: https://github.com/rust-lang/rust/issues/42877\n\n------------------------\n\nThis is a part of [RFC0401]. According to the RFC, there should be an implementation like this:\n\n```rust,ignore\nimpl<..., T, U: ?Sized> Unsized<(..., U)> for (..., T) where T: Unsized<U> {}\n```\n\nThis implementation is currently gated behind `#[feature(unsized_tuple_coercion)]` to avoid insta-stability. Therefore you can use it like this:\n\n```rust\n#![feature(unsized_tuple_coercion)]\n\nfn main() {\n let x : ([i32; 3], [i32; 3]) = ([1, 2, 3], [4, 5, 6]);\n let y : &([i32; 3], [i32]) = &x;\n assert_eq!(y.1[0], 4);\n}\n```\n\n[RFC0401]: https://github.com/rust-lang/rfcs/blob/master/text/0401-coercions.md\n" } , LintCompletion { label : "generators" , description : "# `generators`\n\nThe tracking issue for this feature is: [#43122]\n\n[#43122]: https://github.com/rust-lang/rust/issues/43122\n\n------------------------\n\nThe `generators` feature gate in Rust allows you to define generator or\ncoroutine literals. A generator is a \"resumable function\" that syntactically\nresembles a closure but compiles to much different semantics in the compiler\nitself. The primary feature of a generator is that it can be suspended during\nexecution to be resumed at a later date. Generators use the `yield` keyword to\n\"return\", and then the caller can `resume` a generator to resume execution just\nafter the `yield` keyword.\n\nGenerators are an extra-unstable feature in the compiler right now. Added in\n[RFC 2033] they're mostly intended right now as a information/constraint\ngathering phase. The intent is that experimentation can happen on the nightly\ncompiler before actual stabilization. A further RFC will be required to\nstabilize generators/coroutines and will likely contain at least a few small\ntweaks to the overall design.\n\n[RFC 2033]: https://github.com/rust-lang/rfcs/pull/2033\n\nA syntactical example of a generator is:\n\n```rust\n#![feature(generators, generator_trait)]\n\nuse std::ops::{Generator, GeneratorState};\nuse std::pin::Pin;\n\nfn main() {\n let mut generator = || {\n yield 1;\n return \"foo\"\n };\n\n match Pin::new(&mut generator).resume(()) {\n GeneratorState::Yielded(1) => {}\n _ => panic!(\"unexpected value from resume\"),\n }\n match Pin::new(&mut generator).resume(()) {\n GeneratorState::Complete(\"foo\") => {}\n _ => panic!(\"unexpected value from resume\"),\n }\n}\n```\n\nGenerators are closure-like literals which can contain a `yield` statement. The\n`yield` statement takes an optional expression of a value to yield out of the\ngenerator. All generator literals implement the `Generator` trait in the\n`std::ops` module. The `Generator` trait has one main method, `resume`, which\nresumes execution of the generator at the previous suspension point.\n\nAn example of the control flow of generators is that the following example\nprints all numbers in order:\n\n```rust\n#![feature(generators, generator_trait)]\n\nuse std::ops::Generator;\nuse std::pin::Pin;\n\nfn main() {\n let mut generator = || {\n println!(\"2\");\n yield;\n println!(\"4\");\n };\n\n println!(\"1\");\n Pin::new(&mut generator).resume(());\n println!(\"3\");\n Pin::new(&mut generator).resume(());\n println!(\"5\");\n}\n```\n\nAt this time the main intended use case of generators is an implementation\nprimitive for async/await syntax, but generators will likely be extended to\nergonomic implementations of iterators and other primitives in the future.\nFeedback on the design and usage is always appreciated!\n\n### The `Generator` trait\n\nThe `Generator` trait in `std::ops` currently looks like:\n\n```rust\n# #![feature(arbitrary_self_types, generator_trait)]\n# use std::ops::GeneratorState;\n# use std::pin::Pin;\n\npub trait Generator<R = ()> {\n type Yield;\n type Return;\n fn resume(self: Pin<&mut Self>, resume: R) -> GeneratorState<Self::Yield, Self::Return>;\n}\n```\n\nThe `Generator::Yield` type is the type of values that can be yielded with the\n`yield` statement. The `Generator::Return` type is the returned type of the\ngenerator. This is typically the last expression in a generator's definition or\nany value passed to `return` in a generator. The `resume` function is the entry\npoint for executing the `Generator` itself.\n\nThe return value of `resume`, `GeneratorState`, looks like:\n\n```rust\npub enum GeneratorState<Y, R> {\n Yielded(Y),\n Complete(R),\n}\n```\n\nThe `Yielded` variant indicates that the generator can later be resumed. This\ncorresponds to a `yield` point in a generator. The `Complete` variant indicates\nthat the generator is complete and cannot be resumed again. Calling `resume`\nafter a generator has returned `Complete` will likely result in a panic of the\nprogram.\n\n### Closure-like semantics\n\nThe closure-like syntax for generators alludes to the fact that they also have\nclosure-like semantics. Namely:\n\n* When created, a generator executes no code. A closure literal does not\n actually execute any of the closure's code on construction, and similarly a\n generator literal does not execute any code inside the generator when\n constructed.\n\n* Generators can capture outer variables by reference or by move, and this can\n be tweaked with the `move` keyword at the beginning of the closure. Like\n closures all generators will have an implicit environment which is inferred by\n the compiler. Outer variables can be moved into a generator for use as the\n generator progresses.\n\n* Generator literals produce a value with a unique type which implements the\n `std::ops::Generator` trait. This allows actual execution of the generator\n through the `Generator::resume` method as well as also naming it in return\n types and such.\n\n* Traits like `Send` and `Sync` are automatically implemented for a `Generator`\n depending on the captured variables of the environment. Unlike closures,\n generators also depend on variables live across suspension points. This means\n that although the ambient environment may be `Send` or `Sync`, the generator\n itself may not be due to internal variables live across `yield` points being\n not-`Send` or not-`Sync`. Note that generators do\n not implement traits like `Copy` or `Clone` automatically.\n\n* Whenever a generator is dropped it will drop all captured environment\n variables.\n\n### Generators as state machines\n\nIn the compiler, generators are currently compiled as state machines. Each\n`yield` expression will correspond to a different state that stores all live\nvariables over that suspension point. Resumption of a generator will dispatch on\nthe current state and then execute internally until a `yield` is reached, at\nwhich point all state is saved off in the generator and a value is returned.\n\nLet's take a look at an example to see what's going on here:\n\n```rust\n#![feature(generators, generator_trait)]\n\nuse std::ops::Generator;\nuse std::pin::Pin;\n\nfn main() {\n let ret = \"foo\";\n let mut generator = move || {\n yield 1;\n return ret\n };\n\n Pin::new(&mut generator).resume(());\n Pin::new(&mut generator).resume(());\n}\n```\n\nThis generator literal will compile down to something similar to:\n\n```rust\n#![feature(arbitrary_self_types, generators, generator_trait)]\n\nuse std::ops::{Generator, GeneratorState};\nuse std::pin::Pin;\n\nfn main() {\n let ret = \"foo\";\n let mut generator = {\n enum __Generator {\n Start(&'static str),\n Yield1(&'static str),\n Done,\n }\n\n impl Generator for __Generator {\n type Yield = i32;\n type Return = &'static str;\n\n fn resume(mut self: Pin<&mut Self>, resume: ()) -> GeneratorState<i32, &'static str> {\n use std::mem;\n match mem::replace(&mut *self, __Generator::Done) {\n __Generator::Start(s) => {\n *self = __Generator::Yield1(s);\n GeneratorState::Yielded(1)\n }\n\n __Generator::Yield1(s) => {\n *self = __Generator::Done;\n GeneratorState::Complete(s)\n }\n\n __Generator::Done => {\n panic!(\"generator resumed after completion\")\n }\n }\n }\n }\n\n __Generator::Start(ret)\n };\n\n Pin::new(&mut generator).resume(());\n Pin::new(&mut generator).resume(());\n}\n```\n\nNotably here we can see that the compiler is generating a fresh type,\n`__Generator` in this case. This type has a number of states (represented here\nas an `enum`) corresponding to each of the conceptual states of the generator.\nAt the beginning we're closing over our outer variable `foo` and then that\nvariable is also live over the `yield` point, so it's stored in both states.\n\nWhen the generator starts it'll immediately yield 1, but it saves off its state\njust before it does so indicating that it has reached the yield point. Upon\nresuming again we'll execute the `return ret` which returns the `Complete`\nstate.\n\nHere we can also note that the `Done` state, if resumed, panics immediately as\nit's invalid to resume a completed generator. It's also worth noting that this\nis just a rough desugaring, not a normative specification for what the compiler\ndoes.\n" } , LintCompletion { label : "transparent_unions" , description : "# `transparent_unions`\n\nThe tracking issue for this feature is [#60405]\n\n[#60405]: https://github.com/rust-lang/rust/issues/60405\n\n----\n\nThe `transparent_unions` feature allows you mark `union`s as\n`#[repr(transparent)]`. A `union` may be `#[repr(transparent)]` in exactly the\nsame conditions in which a `struct` may be `#[repr(transparent)]` (generally,\nthis means the `union` must have exactly one non-zero-sized field). Some\nconcrete illustrations follow.\n\n```rust\n#![feature(transparent_unions)]\n\n// This union has the same representation as `f32`.\n#[repr(transparent)]\nunion SingleFieldUnion {\n field: f32,\n}\n\n// This union has the same representation as `usize`.\n#[repr(transparent)]\nunion MultiFieldUnion {\n field: usize,\n nothing: (),\n}\n```\n\nFor consistency with transparent `struct`s, `union`s must have exactly one\nnon-zero-sized field. If all fields are zero-sized, the `union` must not be\n`#[repr(transparent)]`:\n\n```rust\n#![feature(transparent_unions)]\n\n// This (non-transparent) union is already valid in stable Rust:\npub union GoodUnion {\n pub nothing: (),\n}\n\n// Error: transparent union needs exactly one non-zero-sized field, but has 0\n// #[repr(transparent)]\n// pub union BadUnion {\n// pub nothing: (),\n// }\n```\n\nThe one exception is if the `union` is generic over `T` and has a field of type\n`T`, it may be `#[repr(transparent)]` even if `T` is a zero-sized type:\n\n```rust\n#![feature(transparent_unions)]\n\n// This union has the same representation as `T`.\n#[repr(transparent)]\npub union GenericUnion<T: Copy> { // Unions with non-`Copy` fields are unstable.\n pub field: T,\n pub nothing: (),\n}\n\n// This is okay even though `()` is a zero-sized type.\npub const THIS_IS_OKAY: GenericUnion<()> = GenericUnion { field: () };\n```\n\nLike transarent `struct`s, a transparent `union` of type `U` has the same\nlayout, size, and ABI as its single non-ZST field. If it is generic over a type\n`T`, and all its fields are ZSTs except for exactly one field of type `T`, then\nit has the same layout and ABI as `T` (even if `T` is a ZST when monomorphized).\n\nLike transparent `struct`s, transparent `union`s are FFI-safe if and only if\ntheir underlying representation type is also FFI-safe.\n\nA `union` may not be eligible for the same nonnull-style optimizations that a\n`struct` or `enum` (with the same fields) are eligible for. Adding\n`#[repr(transparent)]` to `union` does not change this. To give a more concrete\nexample, it is unspecified whether `size_of::<T>()` is equal to\n`size_of::<Option<T>>()`, where `T` is a `union` (regardless of whether or not\nit is transparent). The Rust compiler is free to perform this optimization if\npossible, but is not required to, and different compiler versions may differ in\ntheir application of these optimizations.\n" } , LintCompletion { label : "plugin_registrar" , description : "# `plugin_registrar`\n\nThe tracking issue for this feature is: [#29597]\n\n[#29597]: https://github.com/rust-lang/rust/issues/29597\n\nThis feature is part of \"compiler plugins.\" It will often be used with the\n[`plugin`] and `rustc_private` features as well. For more details, see\ntheir docs.\n\n[`plugin`]: plugin.md\n\n------------------------\n" } , LintCompletion { label : "or_patterns" , description : "# `or_patterns`\n\nThe tracking issue for this feature is: [#54883]\n\n[#54883]: https://github.com/rust-lang/rust/issues/54883\n\n------------------------\n\nThe `or_pattern` language feature allows `|` to be arbitrarily nested within\na pattern, for example, `Some(A(0) | B(1 | 2))` becomes a valid pattern.\n\n## Examples\n\n```rust,ignore\n#![feature(or_patterns)]\n\npub enum Foo {\n Bar,\n Baz,\n Quux,\n}\n\npub fn example(maybe_foo: Option<Foo>) {\n match maybe_foo {\n Some(Foo::Bar | Foo::Baz) => {\n println!(\"The value contained `Bar` or `Baz`\");\n }\n Some(_) => {\n println!(\"The value did not contain `Bar` or `Baz`\");\n }\n None => {\n println!(\"The value was `None`\");\n }\n }\n}\n```\n" } , LintCompletion { label : "repr128" , description : "# `repr128`\n\nThe tracking issue for this feature is: [#56071]\n\n[#56071]: https://github.com/rust-lang/rust/issues/56071\n\n------------------------\n\nThe `repr128` feature adds support for `#[repr(u128)]` on `enum`s.\n\n```rust\n#![feature(repr128)]\n\n#[repr(u128)]\nenum Foo {\n Bar(u64),\n}\n```\n" } , LintCompletion { label : "unboxed_closures" , description : "# `unboxed_closures`\n\nThe tracking issue for this feature is [#29625]\n\nSee Also: [`fn_traits`](../library-features/fn-traits.md)\n\n[#29625]: https://github.com/rust-lang/rust/issues/29625\n\n----\n\nThe `unboxed_closures` feature allows you to write functions using the `\"rust-call\"` ABI,\nrequired for implementing the [`Fn*`] family of traits. `\"rust-call\"` functions must have \nexactly one (non self) argument, a tuple representing the argument list.\n\n[`Fn*`]: https://doc.rust-lang.org/std/ops/trait.Fn.html\n\n```rust\n#![feature(unboxed_closures)]\n\nextern \"rust-call\" fn add_args(args: (u32, u32)) -> u32 {\n args.0 + args.1\n}\n\nfn main() {}\n```\n" } , LintCompletion { label : "link_cfg" , description : "# `link_cfg`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "rustc_attrs" , description : "# `rustc_attrs`\n\nThis feature has no tracking issue, and is therefore internal to\nthe compiler, not being intended for general use.\n\nNote: `rustc_attrs` enables many rustc-internal attributes and this page\nonly discuss a few of them.\n\n------------------------\n\nThe `rustc_attrs` feature allows debugging rustc type layouts by using\n`#[rustc_layout(...)]` to debug layout at compile time (it even works\nwith `cargo check`) as an alternative to `rustc -Z print-type-sizes`\nthat is way more verbose.\n\nOptions provided by `#[rustc_layout(...)]` are `debug`, `size`, `align`,\n`abi`. Note that it only works on sized types without generics.\n\n## Examples\n\n```rust,ignore\n#![feature(rustc_attrs)]\n\n#[rustc_layout(abi, size)]\npub enum X {\n Y(u8, u8, u8),\n Z(isize),\n}\n```\n\nWhen that is compiled, the compiler will error with something like\n\n```text\nerror: abi: Aggregate { sized: true }\n --> src/lib.rs:4:1\n |\n4 | / pub enum T {\n5 | | Y(u8, u8, u8),\n6 | | Z(isize),\n7 | | }\n | |_^\n\nerror: size: Size { raw: 16 }\n --> src/lib.rs:4:1\n |\n4 | / pub enum T {\n5 | | Y(u8, u8, u8),\n6 | | Z(isize),\n7 | | }\n | |_^\n\nerror: aborting due to 2 previous errors\n```\n" } , LintCompletion { label : "box_patterns" , description : "# `box_patterns`\n\nThe tracking issue for this feature is: [#29641]\n\n[#29641]: https://github.com/rust-lang/rust/issues/29641\n\nSee also [`box_syntax`](box-syntax.md)\n\n------------------------\n\nBox patterns let you match on `Box<T>`s:\n\n\n```rust\n#![feature(box_patterns)]\n\nfn main() {\n let b = Some(Box::new(5));\n match b {\n Some(box n) if n < 0 => {\n println!(\"Box contains negative number {}\", n);\n },\n Some(box n) if n >= 0 => {\n println!(\"Box contains non-negative number {}\", n);\n },\n None => {\n println!(\"No box\");\n },\n _ => unreachable!()\n }\n}\n```\n" } , LintCompletion { label : "infer_static_outlives_requirements" , description : "# `infer_static_outlives_requirements`\n\nThe tracking issue for this feature is: [#54185]\n\n[#54185]: https://github.com/rust-lang/rust/issues/54185\n\n------------------------\nThe `infer_static_outlives_requirements` feature indicates that certain\n`'static` outlives requirements can be inferred by the compiler rather than\nstating them explicitly.\n\nNote: It is an accompanying feature to `infer_outlives_requirements`,\nwhich must be enabled to infer outlives requirements.\n\nFor example, currently generic struct definitions that contain\nreferences, require where-clauses of the form T: 'static. By using\nthis feature the outlives predicates will be inferred, although\nthey may still be written explicitly.\n\n```rust,ignore (pseudo-Rust)\nstruct Foo<U> where U: 'static { // <-- currently required\n bar: Bar<U>\n}\nstruct Bar<T: 'static> {\n x: T,\n}\n```\n\n\n## Examples:\n\n```rust,ignore (pseudo-Rust)\n#![feature(infer_outlives_requirements)]\n#![feature(infer_static_outlives_requirements)]\n\n#[rustc_outlives]\n// Implicitly infer U: 'static\nstruct Foo<U> {\n bar: Bar<U>\n}\nstruct Bar<T: 'static> {\n x: T,\n}\n```\n\n" } , LintCompletion { label : "trait_alias" , description : "# `trait_alias`\n\nThe tracking issue for this feature is: [#41517]\n\n[#41517]: https://github.com/rust-lang/rust/issues/41517\n\n------------------------\n\nThe `trait_alias` feature adds support for trait aliases. These allow aliases\nto be created for one or more traits (currently just a single regular trait plus\nany number of auto-traits), and used wherever traits would normally be used as\neither bounds or trait objects.\n\n```rust\n#![feature(trait_alias)]\n\ntrait Foo = std::fmt::Debug + Send;\ntrait Bar = Foo + Sync;\n\n// Use trait alias as bound on type parameter.\nfn foo<T: Foo>(v: &T) {\n println!(\"{:?}\", v);\n}\n\npub fn main() {\n foo(&1);\n\n // Use trait alias for trait objects.\n let a: &Bar = &123;\n println!(\"{:?}\", a);\n let b = Box::new(456) as Box<dyn Foo>;\n println!(\"{:?}\", b);\n}\n```\n" } , LintCompletion { label : "const_fn" , description : "# `const_fn`\n\nThe tracking issue for this feature is: [#57563]\n\n[#57563]: https://github.com/rust-lang/rust/issues/57563\n\n------------------------\n\nThe `const_fn` feature allows marking free functions and inherent methods as\n`const`, enabling them to be called in constants contexts, with constant\narguments.\n\n## Examples\n\n```rust\n#![feature(const_fn)]\n\nconst fn double(x: i32) -> i32 {\n x * 2\n}\n\nconst FIVE: i32 = 5;\nconst TEN: i32 = double(FIVE);\n\nfn main() {\n assert_eq!(5, FIVE);\n assert_eq!(10, TEN);\n}\n```\n" } , LintCompletion { label : "doc_cfg" , description : "# `doc_cfg`\n\nThe tracking issue for this feature is: [#43781]\n\n------\n\nThe `doc_cfg` feature allows an API be documented as only available in some specific platforms.\nThis attribute has two effects:\n\n1. In the annotated item's documentation, there will be a message saying \"This is supported on\n (platform) only\".\n\n2. The item's doc-tests will only run on the specific platform.\n\nIn addition to allowing the use of the `#[doc(cfg)]` attribute, this feature enables the use of a\nspecial conditional compilation flag, `#[cfg(doc)]`, set whenever building documentation on your\ncrate.\n\nThis feature was introduced as part of PR [#43348] to allow the platform-specific parts of the\nstandard library be documented.\n\n```rust\n#![feature(doc_cfg)]\n\n#[cfg(any(windows, doc))]\n#[doc(cfg(windows))]\n/// The application's icon in the notification area (a.k.a. system tray).\n///\n/// # Examples\n///\n/// ```no_run\n/// extern crate my_awesome_ui_library;\n/// use my_awesome_ui_library::current_app;\n/// use my_awesome_ui_library::windows::notification;\n///\n/// let icon = current_app().get::<notification::Icon>();\n/// icon.show();\n/// icon.show_message(\"Hello\");\n/// ```\npub struct Icon {\n // ...\n}\n```\n\n[#43781]: https://github.com/rust-lang/rust/issues/43781\n[#43348]: https://github.com/rust-lang/rust/issues/43348\n" } , LintCompletion { label : "allocator_internals" , description : "# `allocator_internals`\n\nThis feature does not have a tracking issue, it is an unstable implementation\ndetail of the `global_allocator` feature not intended for use outside the\ncompiler.\n\n------------------------\n" } , LintCompletion { label : "doc_masked" , description : "# `doc_masked`\n\nThe tracking issue for this feature is: [#44027]\n\n-----\n\nThe `doc_masked` feature allows a crate to exclude types from a given crate from appearing in lists\nof trait implementations. The specifics of the feature are as follows:\n\n1. When rustdoc encounters an `extern crate` statement annotated with a `#[doc(masked)]` attribute,\n it marks the crate as being masked.\n\n2. When listing traits a given type implements, rustdoc ensures that traits from masked crates are\n not emitted into the documentation.\n\n3. When listing types that implement a given trait, rustdoc ensures that types from masked crates\n are not emitted into the documentation.\n\nThis feature was introduced in PR [#44026] to ensure that compiler-internal and\nimplementation-specific types and traits were not included in the standard library's documentation.\nSuch types would introduce broken links into the documentation.\n\n[#44026]: https://github.com/rust-lang/rust/pull/44026\n[#44027]: https://github.com/rust-lang/rust/pull/44027\n" } , LintCompletion { label : "no_sanitize" , description : "# `no_sanitize`\n\nThe tracking issue for this feature is: [#39699]\n\n[#39699]: https://github.com/rust-lang/rust/issues/39699\n\n------------------------\n\nThe `no_sanitize` attribute can be used to selectively disable sanitizer\ninstrumentation in an annotated function. This might be useful to: avoid\ninstrumentation overhead in a performance critical function, or avoid\ninstrumenting code that contains constructs unsupported by given sanitizer.\n\nThe precise effect of this annotation depends on particular sanitizer in use.\nFor example, with `no_sanitize(thread)`, the thread sanitizer will no longer\ninstrument non-atomic store / load operations, but it will instrument atomic\noperations to avoid reporting false positives and provide meaning full stack\ntraces.\n\n## Examples\n\n``` rust\n#![feature(no_sanitize)]\n\n#[no_sanitize(address)]\nfn foo() {\n // ...\n}\n```\n" } , LintCompletion { label : "intrinsics" , description : "# `intrinsics`\n\nThe tracking issue for this feature is: None.\n\nIntrinsics are never intended to be stable directly, but intrinsics are often\nexported in some sort of stable manner. Prefer using the stable interfaces to\nthe intrinsic directly when you can.\n\n------------------------\n\n\nThese are imported as if they were FFI functions, with the special\n`rust-intrinsic` ABI. For example, if one was in a freestanding\ncontext, but wished to be able to `transmute` between types, and\nperform efficient pointer arithmetic, one would import those functions\nvia a declaration like\n\n```rust\n#![feature(intrinsics)]\n# fn main() {}\n\nextern \"rust-intrinsic\" {\n fn transmute<T, U>(x: T) -> U;\n\n fn offset<T>(dst: *const T, offset: isize) -> *const T;\n}\n```\n\nAs with any other FFI functions, these are always `unsafe` to call.\n\n" } , LintCompletion { label : "external_doc" , description : "# `external_doc`\n\nThe tracking issue for this feature is: [#44732]\n\nThe `external_doc` feature allows the use of the `include` parameter to the `#[doc]` attribute, to\ninclude external files in documentation. Use the attribute in place of, or in addition to, regular\ndoc comments and `#[doc]` attributes, and `rustdoc` will load the given file when it renders\ndocumentation for your crate.\n\nWith the following files in the same directory:\n\n`external-doc.md`:\n\n```markdown\n# My Awesome Type\n\nThis is the documentation for this spectacular type.\n```\n\n`lib.rs`:\n\n```no_run (needs-external-files)\n#![feature(external_doc)]\n\n#[doc(include = \"external-doc.md\")]\npub struct MyAwesomeType;\n```\n\n`rustdoc` will load the file `external-doc.md` and use it as the documentation for the `MyAwesomeType`\nstruct.\n\nWhen locating files, `rustdoc` will base paths in the `src/` directory, as if they were alongside the\n`lib.rs` for your crate. So if you want a `docs/` folder to live alongside the `src/` directory,\nstart your paths with `../docs/` for `rustdoc` to properly find the file.\n\nThis feature was proposed in [RFC #1990] and initially implemented in PR [#44781].\n\n[#44732]: https://github.com/rust-lang/rust/issues/44732\n[RFC #1990]: https://github.com/rust-lang/rfcs/pull/1990\n[#44781]: https://github.com/rust-lang/rust/pull/44781\n" } , LintCompletion { label : "inline_const" , description : "# `inline_const`\n\nThe tracking issue for this feature is: [#76001]\n\n------\n\nThis feature allows you to use inline constant expressions. For example, you can\nturn this code:\n\n```rust\n# fn add_one(x: i32) -> i32 { x + 1 }\nconst MY_COMPUTATION: i32 = 1 + 2 * 3 / 4;\n\nfn main() {\n let x = add_one(MY_COMPUTATION);\n}\n```\n\ninto this code:\n\n```rust\n#![feature(inline_const)]\n\n# fn add_one(x: i32) -> i32 { x + 1 }\nfn main() {\n let x = add_one(const { 1 + 2 * 3 / 4 });\n}\n```\n\nYou can also use inline constant expressions in patterns:\n\n```rust\n#![feature(inline_const)]\n\nconst fn one() -> i32 { 1 }\n\nlet some_int = 3;\nmatch some_int {\n const { 1 + 2 } => println!(\"Matched 1 + 2\"),\n const { one() } => println!(\"Matched const fn returning 1\"),\n _ => println!(\"Didn't match anything :(\"),\n}\n```\n\n[#76001]: https://github.com/rust-lang/rust/issues/76001\n" } , LintCompletion { label : "abi_thiscall" , description : "# `abi_thiscall`\n\nThe tracking issue for this feature is: [#42202]\n\n[#42202]: https://github.com/rust-lang/rust/issues/42202\n\n------------------------\n\nThe MSVC ABI on x86 Windows uses the `thiscall` calling convention for C++\ninstance methods by default; it is identical to the usual (C) calling\nconvention on x86 Windows except that the first parameter of the method,\nthe `this` pointer, is passed in the ECX register.\n" } , LintCompletion { label : "plugin" , description : "# `plugin`\n\nThe tracking issue for this feature is: [#29597]\n\n[#29597]: https://github.com/rust-lang/rust/issues/29597\n\n\nThis feature is part of \"compiler plugins.\" It will often be used with the\n[`plugin_registrar`] and `rustc_private` features.\n\n[`plugin_registrar`]: plugin-registrar.md\n\n------------------------\n\n`rustc` can load compiler plugins, which are user-provided libraries that\nextend the compiler's behavior with new lint checks, etc.\n\nA plugin is a dynamic library crate with a designated *registrar* function that\nregisters extensions with `rustc`. Other crates can load these extensions using\nthe crate attribute `#![plugin(...)]`. See the\n`rustc_driver::plugin` documentation for more about the\nmechanics of defining and loading a plugin.\n\nIn the vast majority of cases, a plugin should *only* be used through\n`#![plugin]` and not through an `extern crate` item. Linking a plugin would\npull in all of librustc_ast and librustc as dependencies of your crate. This is\ngenerally unwanted unless you are building another plugin.\n\nThe usual practice is to put compiler plugins in their own crate, separate from\nany `macro_rules!` macros or ordinary Rust code meant to be used by consumers\nof a library.\n\n# Lint plugins\n\nPlugins can extend [Rust's lint\ninfrastructure](../../reference/attributes/diagnostics.md#lint-check-attributes) with\nadditional checks for code style, safety, etc. Now let's write a plugin\n[`lint-plugin-test.rs`](https://github.com/rust-lang/rust/blob/master/src/test/ui-fulldeps/auxiliary/lint-plugin-test.rs)\nthat warns about any item named `lintme`.\n\n```rust,ignore\n#![feature(plugin_registrar)]\n#![feature(box_syntax, rustc_private)]\n\nextern crate rustc_ast;\n\n// Load rustc as a plugin to get macros\nextern crate rustc_driver;\n#[macro_use]\nextern crate rustc_lint;\n#[macro_use]\nextern crate rustc_session;\n\nuse rustc_driver::plugin::Registry;\nuse rustc_lint::{EarlyContext, EarlyLintPass, LintArray, LintContext, LintPass};\nuse rustc_ast::ast;\ndeclare_lint!(TEST_LINT, Warn, \"Warn about items named 'lintme'\");\n\ndeclare_lint_pass!(Pass => [TEST_LINT]);\n\nimpl EarlyLintPass for Pass {\n fn check_item(&mut self, cx: &EarlyContext, it: &ast::Item) {\n if it.ident.name.as_str() == \"lintme\" {\n cx.lint(TEST_LINT, |lint| {\n lint.build(\"item is named 'lintme'\").set_span(it.span).emit()\n });\n }\n }\n}\n\n#[plugin_registrar]\npub fn plugin_registrar(reg: &mut Registry) {\n reg.lint_store.register_lints(&[&TEST_LINT]);\n reg.lint_store.register_early_pass(|| box Pass);\n}\n```\n\nThen code like\n\n```rust,ignore\n#![feature(plugin)]\n#![plugin(lint_plugin_test)]\n\nfn lintme() { }\n```\n\nwill produce a compiler warning:\n\n```txt\nfoo.rs:4:1: 4:16 warning: item is named 'lintme', #[warn(test_lint)] on by default\nfoo.rs:4 fn lintme() { }\n ^~~~~~~~~~~~~~~\n```\n\nThe components of a lint plugin are:\n\n* one or more `declare_lint!` invocations, which define static `Lint` structs;\n\n* a struct holding any state needed by the lint pass (here, none);\n\n* a `LintPass`\n implementation defining how to check each syntax element. A single\n `LintPass` may call `span_lint` for several different `Lint`s, but should\n register them all through the `get_lints` method.\n\nLint passes are syntax traversals, but they run at a late stage of compilation\nwhere type information is available. `rustc`'s [built-in\nlints](https://github.com/rust-lang/rust/blob/master/src/librustc_session/lint/builtin.rs)\nmostly use the same infrastructure as lint plugins, and provide examples of how\nto access type information.\n\nLints defined by plugins are controlled by the usual [attributes and compiler\nflags](../../reference/attributes/diagnostics.md#lint-check-attributes), e.g.\n`#[allow(test_lint)]` or `-A test-lint`. These identifiers are derived from the\nfirst argument to `declare_lint!`, with appropriate case and punctuation\nconversion.\n\nYou can run `rustc -W help foo.rs` to see a list of lints known to `rustc`,\nincluding those provided by plugins loaded by `foo.rs`.\n" } , LintCompletion { label : "optin_builtin_traits" , description : "# `optin_builtin_traits`\n\nThe tracking issue for this feature is [#13231] \n\n[#13231]: https://github.com/rust-lang/rust/issues/13231\n\n----\n\nThe `optin_builtin_traits` feature gate allows you to define auto traits.\n\nAuto traits, like [`Send`] or [`Sync`] in the standard library, are marker traits\nthat are automatically implemented for every type, unless the type, or a type it contains, \nhas explicitly opted out via a negative impl. (Negative impls are separately controlled\nby the `negative_impls` feature.)\n\n[`Send`]: https://doc.rust-lang.org/std/marker/trait.Send.html\n[`Sync`]: https://doc.rust-lang.org/std/marker/trait.Sync.html\n\n```rust,ignore\nimpl !Trait for Type\n```\n\nExample:\n\n```rust\n#![feature(negative_impls)]\n#![feature(optin_builtin_traits)]\n\nauto trait Valid {}\n\nstruct True;\nstruct False;\n\nimpl !Valid for False {}\n\nstruct MaybeValid<T>(T);\n\nfn must_be_valid<T: Valid>(_t: T) { }\n\nfn main() {\n // works\n must_be_valid( MaybeValid(True) );\n \n // compiler error - trait bound not satisfied\n // must_be_valid( MaybeValid(False) );\n}\n```\n\n## Automatic trait implementations\n\nWhen a type is declared as an `auto trait`, we will automatically\ncreate impls for every struct/enum/union, unless an explicit impl is\nprovided. These automatic impls contain a where clause for each field\nof the form `T: AutoTrait`, where `T` is the type of the field and\n`AutoTrait` is the auto trait in question. As an example, consider the\nstruct `List` and the auto trait `Send`:\n\n```rust\nstruct List<T> {\n data: T,\n next: Option<Box<List<T>>>,\n}\n```\n\nPresuming that there is no explicit impl of `Send` for `List`, the\ncompiler will supply an automatic impl of the form:\n\n```rust\nstruct List<T> {\n data: T,\n next: Option<Box<List<T>>>,\n}\n\nunsafe impl<T> Send for List<T>\nwhere\n T: Send, // from the field `data`\n Option<Box<List<T>>>: Send, // from the field `next`\n{ }\n```\n\nExplicit impls may be either positive or negative. They take the form:\n\n```rust,ignore\nimpl<...> AutoTrait for StructName<..> { }\nimpl<...> !AutoTrait for StructName<..> { }\n```\n\n## Coinduction: Auto traits permit cyclic matching\n\nUnlike ordinary trait matching, auto traits are **coinductive**. This\nmeans, in short, that cycles which occur in trait matching are\nconsidered ok. As an example, consider the recursive struct `List`\nintroduced in the previous section. In attempting to determine whether\n`List: Send`, we would wind up in a cycle: to apply the impl, we must\nshow that `Option<Box<List>>: Send`, which will in turn require\n`Box<List>: Send` and then finally `List: Send` again. Under ordinary\ntrait matching, this cycle would be an error, but for an auto trait it\nis considered a successful match.\n\n## Items\n\nAuto traits cannot have any trait items, such as methods or associated types. This ensures that we can generate default implementations.\n\n## Supertraits\n\nAuto traits cannot have supertraits. This is for soundness reasons, as the interaction of coinduction with implied bounds is difficult to reconcile.\n\n" } , LintCompletion { label : "impl_trait_in_bindings" , description : "# `impl_trait_in_bindings`\n\nThe tracking issue for this feature is: [#63065]\n\n[#63065]: https://github.com/rust-lang/rust/issues/63065\n\n------------------------\n\nThe `impl_trait_in_bindings` feature gate lets you use `impl Trait` syntax in\n`let`, `static`, and `const` bindings.\n\nA simple example is:\n\n```rust\n#![feature(impl_trait_in_bindings)]\n\nuse std::fmt::Debug;\n\nfn main() {\n let a: impl Debug + Clone = 42;\n let b = a.clone();\n println!(\"{:?}\", b); // prints `42`\n}\n```\n\nNote however that because the types of `a` and `b` are opaque in the above\nexample, calling inherent methods or methods outside of the specified traits\n(e.g., `a.abs()` or `b.abs()`) is not allowed, and yields an error.\n" } , LintCompletion { label : "abi_ptx" , description : "# `abi_ptx`\n\nThe tracking issue for this feature is: [#38788]\n\n[#38788]: https://github.com/rust-lang/rust/issues/38788\n\n------------------------\n\nWhen emitting PTX code, all vanilla Rust functions (`fn`) get translated to\n\"device\" functions. These functions are *not* callable from the host via the\nCUDA API so a crate with only device functions is not too useful!\n\nOTOH, \"global\" functions *can* be called by the host; you can think of them\nas the real public API of your crate. To produce a global function use the\n`\"ptx-kernel\"` ABI.\n\n<!-- NOTE(ignore) this example is specific to the nvptx targets -->\n\n``` rust,ignore\n#![feature(abi_ptx)]\n#![no_std]\n\npub unsafe extern \"ptx-kernel\" fn global_function() {\n device_function();\n}\n\npub fn device_function() {\n // ..\n}\n```\n\n``` text\n$ xargo rustc --target nvptx64-nvidia-cuda --release -- --emit=asm\n\n$ cat $(find -name '*.s')\n//\n// Generated by LLVM NVPTX Back-End\n//\n\n.version 3.2\n.target sm_20\n.address_size 64\n\n // .globl _ZN6kernel15global_function17h46111ebe6516b382E\n\n.visible .entry _ZN6kernel15global_function17h46111ebe6516b382E()\n{\n\n\n ret;\n}\n\n // .globl _ZN6kernel15device_function17hd6a0e4993bbf3f78E\n.visible .func _ZN6kernel15device_function17hd6a0e4993bbf3f78E()\n{\n\n\n ret;\n}\n```\n" } , LintCompletion { label : "dec2flt" , description : "# `dec2flt`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "int_error_internals" , description : "# `int_error_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "llvm_asm" , description : "# `llvm_asm`\n\nThe tracking issue for this feature is: [#70173]\n\n[#70173]: https://github.com/rust-lang/rust/issues/70173\n\n------------------------\n\nFor extremely low-level manipulations and performance reasons, one\nmight wish to control the CPU directly. Rust supports using inline\nassembly to do this via the `llvm_asm!` macro.\n\n```rust,ignore\nllvm_asm!(assembly template\n : output operands\n : input operands\n : clobbers\n : options\n );\n```\n\nAny use of `llvm_asm` is feature gated (requires `#![feature(llvm_asm)]` on the\ncrate to allow) and of course requires an `unsafe` block.\n\n> **Note**: the examples here are given in x86/x86-64 assembly, but\n> all platforms are supported.\n\n## Assembly template\n\nThe `assembly template` is the only required parameter and must be a\nliteral string (i.e. `\"\"`)\n\n```rust\n#![feature(llvm_asm)]\n\n#[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\nfn foo() {\n unsafe {\n llvm_asm!(\"NOP\");\n }\n}\n\n// Other platforms:\n#[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\nfn foo() { /* ... */ }\n\nfn main() {\n // ...\n foo();\n // ...\n}\n```\n\n(The `feature(llvm_asm)` and `#[cfg]`s are omitted from now on.)\n\nOutput operands, input operands, clobbers and options are all optional\nbut you must add the right number of `:` if you skip them:\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n# fn main() { unsafe {\nllvm_asm!(\"xor %eax, %eax\"\n :\n :\n : \"eax\"\n );\n# } }\n# #[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\n# fn main() {}\n```\n\nWhitespace also doesn't matter:\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n# fn main() { unsafe {\nllvm_asm!(\"xor %eax, %eax\" ::: \"eax\");\n# } }\n# #[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\n# fn main() {}\n```\n\n## Operands\n\nInput and output operands follow the same format: `:\n\"constraints1\"(expr1), \"constraints2\"(expr2), ...\"`. Output operand\nexpressions must be mutable place, or not yet assigned:\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\nfn add(a: i32, b: i32) -> i32 {\n let c: i32;\n unsafe {\n llvm_asm!(\"add $2, $0\"\n : \"=r\"(c)\n : \"0\"(a), \"r\"(b)\n );\n }\n c\n}\n# #[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\n# fn add(a: i32, b: i32) -> i32 { a + b }\n\nfn main() {\n assert_eq!(add(3, 14159), 14162)\n}\n```\n\nIf you would like to use real operands in this position, however,\nyou are required to put curly braces `{}` around the register that\nyou want, and you are required to put the specific size of the\noperand. This is useful for very low level programming, where\nwhich register you use is important:\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n# unsafe fn read_byte_in(port: u16) -> u8 {\nlet result: u8;\nllvm_asm!(\"in %dx, %al\" : \"={al}\"(result) : \"{dx}\"(port));\nresult\n# }\n```\n\n## Clobbers\n\nSome instructions modify registers which might otherwise have held\ndifferent values so we use the clobbers list to indicate to the\ncompiler not to assume any values loaded into those registers will\nstay valid.\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n# fn main() { unsafe {\n// Put the value 0x200 in eax:\nllvm_asm!(\"mov $$0x200, %eax\" : /* no outputs */ : /* no inputs */ : \"eax\");\n# } }\n# #[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\n# fn main() {}\n```\n\nInput and output registers need not be listed since that information\nis already communicated by the given constraints. Otherwise, any other\nregisters used either implicitly or explicitly should be listed.\n\nIf the assembly changes the condition code register `cc` should be\nspecified as one of the clobbers. Similarly, if the assembly modifies\nmemory, `memory` should also be specified.\n\n## Options\n\nThe last section, `options` is specific to Rust. The format is comma\nseparated literal strings (i.e. `:\"foo\", \"bar\", \"baz\"`). It's used to\nspecify some extra info about the inline assembly:\n\nCurrent valid options are:\n\n1. `volatile` - specifying this is analogous to\n `__asm__ __volatile__ (...)` in gcc/clang.\n2. `alignstack` - certain instructions expect the stack to be\n aligned a certain way (i.e. SSE) and specifying this indicates to\n the compiler to insert its usual stack alignment code\n3. `intel` - use intel syntax instead of the default AT&T.\n\n```rust\n# #![feature(llvm_asm)]\n# #[cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n# fn main() {\nlet result: i32;\nunsafe {\n llvm_asm!(\"mov eax, 2\" : \"={eax}\"(result) : : : \"intel\")\n}\nprintln!(\"eax is currently {}\", result);\n# }\n# #[cfg(not(any(target_arch = \"x86\", target_arch = \"x86_64\")))]\n# fn main() {}\n```\n\n## More Information\n\nThe current implementation of the `llvm_asm!` macro is a direct binding to [LLVM's\ninline assembler expressions][llvm-docs], so be sure to check out [their\ndocumentation as well][llvm-docs] for more information about clobbers,\nconstraints, etc.\n\n[llvm-docs]: http://llvm.org/docs/LangRef.html#inline-assembler-expressions\n\nIf you need more power and don't mind losing some of the niceties of\n`llvm_asm!`, check out [global_asm](global-asm.md).\n" } , LintCompletion { label : "default_free_fn" , description : "# `default_free_fn`\n\nThe tracking issue for this feature is: [#73014]\n\n[#73014]: https://github.com/rust-lang/rust/issues/73014\n\n------------------------\n\nAdds a free `default()` function to the `std::default` module. This function\njust forwards to [`Default::default()`], but may remove repetition of the word\n\"default\" from the call site.\n\n[`Default::default()`]: https://doc.rust-lang.org/nightly/std/default/trait.Default.html#tymethod.default\n\nHere is an example:\n\n```rust\n#![feature(default_free_fn)]\nuse std::default::default;\n\n#[derive(Default)]\nstruct AppConfig {\n foo: FooConfig,\n bar: BarConfig,\n}\n\n#[derive(Default)]\nstruct FooConfig {\n foo: i32,\n}\n\n#[derive(Default)]\nstruct BarConfig {\n bar: f32,\n baz: u8,\n}\n\nfn main() {\n let options = AppConfig {\n foo: default(),\n bar: BarConfig {\n bar: 10.1,\n ..default()\n },\n };\n}\n```\n" } , LintCompletion { label : "libstd_thread_internals" , description : "# `libstd_thread_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "char_error_internals" , description : "# `char_error_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "windows_handle" , description : "# `windows_handle`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "global_asm" , description : "# `global_asm`\n\nThe tracking issue for this feature is: [#35119]\n\n[#35119]: https://github.com/rust-lang/rust/issues/35119\n\n------------------------\n\nThe `global_asm!` macro allows the programmer to write arbitrary\nassembly outside the scope of a function body, passing it through\n`rustc` and `llvm` to the assembler. The macro is a no-frills\ninterface to LLVM's concept of [module-level inline assembly]. That is,\nall caveats applicable to LLVM's module-level inline assembly apply\nto `global_asm!`.\n\n[module-level inline assembly]: http://llvm.org/docs/LangRef.html#module-level-inline-assembly\n\n`global_asm!` fills a role not currently satisfied by either `asm!`\nor `#[naked]` functions. The programmer has _all_ features of the\nassembler at their disposal. The linker will expect to resolve any\nsymbols defined in the inline assembly, modulo any symbols marked as\nexternal. It also means syntax for directives and assembly follow the\nconventions of the assembler in your toolchain.\n\nA simple usage looks like this:\n\n```rust,ignore\n# #![feature(global_asm)]\n# you also need relevant target_arch cfgs\nglobal_asm!(include_str!(\"something_neato.s\"));\n```\n\nAnd a more complicated usage looks like this:\n\n```rust,ignore\n# #![feature(global_asm)]\n# #![cfg(any(target_arch = \"x86\", target_arch = \"x86_64\"))]\n\npub mod sally {\n global_asm!(r#\"\n .global foo\n foo:\n jmp baz\n \"#);\n\n #[no_mangle]\n pub unsafe extern \"C\" fn baz() {}\n}\n\n// the symbols `foo` and `bar` are global, no matter where\n// `global_asm!` was used.\nextern \"C\" {\n fn foo();\n fn bar();\n}\n\npub mod harry {\n global_asm!(r#\"\n .global bar\n bar:\n jmp quux\n \"#);\n\n #[no_mangle]\n pub unsafe extern \"C\" fn quux() {}\n}\n```\n\nYou may use `global_asm!` multiple times, anywhere in your crate, in\nwhatever way suits you. The effect is as if you concatenated all\nusages and placed the larger, single usage in the crate root.\n\n------------------------\n\nIf you don't need quite as much power and flexibility as\n`global_asm!` provides, and you don't mind restricting your inline\nassembly to `fn` bodies only, you might try the\n[asm](asm.md) feature instead.\n" } , LintCompletion { label : "windows_c" , description : "# `windows_c`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "asm" , description : "# `asm`\n\nThe tracking issue for this feature is: [#72016]\n\n[#72016]: https://github.com/rust-lang/rust/issues/72016\n\n------------------------\n\nFor extremely low-level manipulations and performance reasons, one\nmight wish to control the CPU directly. Rust supports using inline\nassembly to do this via the `asm!` macro.\n\n# Guide-level explanation\n[guide-level-explanation]: #guide-level-explanation\n\nRust provides support for inline assembly via the `asm!` macro.\nIt can be used to embed handwritten assembly in the assembly output generated by the compiler.\nGenerally this should not be necessary, but might be where the required performance or timing\ncannot be otherwise achieved. Accessing low level hardware primitives, e.g. in kernel code, may also demand this functionality.\n\n> **Note**: the examples here are given in x86/x86-64 assembly, but other architectures are also supported.\n\nInline assembly is currently supported on the following architectures:\n- x86 and x86-64\n- ARM\n- AArch64\n- RISC-V\n- NVPTX\n- Hexagon\n- MIPS32r2 and MIPS64r2\n\n## Basic usage\n\nLet us start with the simplest possible example:\n\n```rust,allow_fail\n# #![feature(asm)]\nunsafe {\n asm!(\"nop\");\n}\n```\n\nThis will insert a NOP (no operation) instruction into the assembly generated by the compiler.\nNote that all `asm!` invocations have to be inside an `unsafe` block, as they could insert\narbitrary instructions and break various invariants. The instructions to be inserted are listed\nin the first argument of the `asm!` macro as a string literal.\n\n## Inputs and outputs\n\nNow inserting an instruction that does nothing is rather boring. Let us do something that\nactually acts on data:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet x: u64;\nunsafe {\n asm!(\"mov {}, 5\", out(reg) x);\n}\nassert_eq!(x, 5);\n```\n\nThis will write the value `5` into the `u64` variable `x`.\nYou can see that the string literal we use to specify instructions is actually a template string.\nIt is governed by the same rules as Rust [format strings][format-syntax].\nThe arguments that are inserted into the template however look a bit different then you may\nbe familiar with. First we need to specify if the variable is an input or an output of the\ninline assembly. In this case it is an output. We declared this by writing `out`.\nWe also need to specify in what kind of register the assembly expects the variable.\nIn this case we put it in an arbitrary general purpose register by specifying `reg`.\nThe compiler will choose an appropriate register to insert into\nthe template and will read the variable from there after the inline assembly finishes executing.\n\nLet us see another example that also uses an input:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet i: u64 = 3;\nlet o: u64;\nunsafe {\n asm!(\n \"mov {0}, {1}\",\n \"add {0}, {number}\",\n out(reg) o,\n in(reg) i,\n number = const 5,\n );\n}\nassert_eq!(o, 8);\n```\n\nThis will add `5` to the input in variable `i` and write the result to variable `o`.\nThe particular way this assembly does this is first copying the value from `i` to the output,\nand then adding `5` to it.\n\nThe example shows a few things:\n\nFirst, we can see that `asm!` allows multiple template string arguments; each\none is treated as a separate line of assembly code, as if they were all joined\ntogether with newlines between them. This makes it easy to format assembly\ncode.\n\nSecond, we can see that inputs are declared by writing `in` instead of `out`.\n\nThird, one of our operands has a type we haven't seen yet, `const`.\nThis tells the compiler to expand this argument to value directly inside the assembly template.\nThis is only possible for constants and literals.\n\nFourth, we can see that we can specify an argument number, or name as in any format string.\nFor inline assembly templates this is particularly useful as arguments are often used more than once.\nFor more complex inline assembly using this facility is generally recommended, as it improves\nreadability, and allows reordering instructions without changing the argument order.\n\nWe can further refine the above example to avoid the `mov` instruction:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet mut x: u64 = 3;\nunsafe {\n asm!(\"add {0}, {number}\", inout(reg) x, number = const 5);\n}\nassert_eq!(x, 8);\n```\n\nWe can see that `inout` is used to specify an argument that is both input and output.\nThis is different from specifying an input and output separately in that it is guaranteed to assign both to the same register.\n\nIt is also possible to specify different variables for the input and output parts of an `inout` operand:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet x: u64 = 3;\nlet y: u64;\nunsafe {\n asm!(\"add {0}, {number}\", inout(reg) x => y, number = const 5);\n}\nassert_eq!(y, 8);\n```\n\n## Late output operands\n\nThe Rust compiler is conservative with its allocation of operands. It is assumed that an `out`\ncan be written at any time, and can therefore not share its location with any other argument.\nHowever, to guarantee optimal performance it is important to use as few registers as possible,\nso they won't have to be saved and reloaded around the inline assembly block.\nTo achieve this Rust provides a `lateout` specifier. This can be used on any output that is\nwritten only after all inputs have been consumed.\nThere is also a `inlateout` variant of this specifier.\n\nHere is an example where `inlateout` *cannot* be used:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet mut a: u64 = 4;\nlet b: u64 = 4;\nlet c: u64 = 4;\nunsafe {\n asm!(\n \"add {0}, {1}\",\n \"add {0}, {2}\",\n inout(reg) a,\n in(reg) b,\n in(reg) c,\n );\n}\nassert_eq!(a, 12);\n```\n\nHere the compiler is free to allocate the same register for inputs `b` and `c` since it knows they have the same value. However it must allocate a separate register for `a` since it uses `inout` and not `inlateout`. If `inlateout` was used, then `a` and `c` could be allocated to the same register, in which case the first instruction to overwrite the value of `c` and cause the assembly code to produce the wrong result.\n\nHowever the following example can use `inlateout` since the output is only modified after all input registers have been read:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet mut a: u64 = 4;\nlet b: u64 = 4;\nunsafe {\n asm!(\"add {0}, {1}\", inlateout(reg) a, in(reg) b);\n}\nassert_eq!(a, 8);\n```\n\nAs you can see, this assembly fragment will still work correctly if `a` and `b` are assigned to the same register.\n\n## Explicit register operands\n\nSome instructions require that the operands be in a specific register.\nTherefore, Rust inline assembly provides some more specific constraint specifiers.\nWhile `reg` is generally available on any architecture, these are highly architecture specific. E.g. for x86 the general purpose registers `eax`, `ebx`, `ecx`, `edx`, `ebp`, `esi`, and `edi`\namong others can be addressed by their name.\n\n```rust,allow_fail,no_run\n# #![feature(asm)]\nlet cmd = 0xd1;\nunsafe {\n asm!(\"out 0x64, eax\", in(\"eax\") cmd);\n}\n```\n\nIn this example we call the `out` instruction to output the content of the `cmd` variable\nto port `0x64`. Since the `out` instruction only accepts `eax` (and its sub registers) as operand\nwe had to use the `eax` constraint specifier.\n\nNote that unlike other operand types, explicit register operands cannot be used in the template string: you can't use `{}` and should write the register name directly instead. Also, they must appear at the end of the operand list after all other operand types.\n\nConsider this example which uses the x86 `mul` instruction:\n\n```rust,allow_fail\n# #![feature(asm)]\nfn mul(a: u64, b: u64) -> u128 {\n let lo: u64;\n let hi: u64;\n\n unsafe {\n asm!(\n // The x86 mul instruction takes rax as an implicit input and writes\n // the 128-bit result of the multiplication to rax:rdx.\n \"mul {}\",\n in(reg) a,\n inlateout(\"rax\") b => lo,\n lateout(\"rdx\") hi\n );\n }\n\n ((hi as u128) << 64) + lo as u128\n}\n```\n\nThis uses the `mul` instruction to multiply two 64-bit inputs with a 128-bit result.\nThe only explicit operand is a register, that we fill from the variable `a`.\nThe second operand is implicit, and must be the `rax` register, which we fill from the variable `b`.\nThe lower 64 bits of the result are stored in `rax` from which we fill the variable `lo`.\nThe higher 64 bits are stored in `rdx` from which we fill the variable `hi`.\n\n## Clobbered registers\n\nIn many cases inline assembly will modify state that is not needed as an output.\nUsually this is either because we have to use a scratch register in the assembly,\nor instructions modify state that we don't need to further examine.\nThis state is generally referred to as being \"clobbered\".\nWe need to tell the compiler about this since it may need to save and restore this state\naround the inline assembly block.\n\n```rust,allow_fail\n# #![feature(asm)]\nlet ebx: u32;\nlet ecx: u32;\n\nunsafe {\n asm!(\n \"cpuid\",\n // EAX 4 selects the \"Deterministic Cache Parameters\" CPUID leaf\n inout(\"eax\") 4 => _,\n // ECX 0 selects the L0 cache information.\n inout(\"ecx\") 0 => ecx,\n lateout(\"ebx\") ebx,\n lateout(\"edx\") _,\n );\n}\n\nprintln!(\n \"L1 Cache: {}\",\n ((ebx >> 22) + 1) * (((ebx >> 12) & 0x3ff) + 1) * ((ebx & 0xfff) + 1) * (ecx + 1)\n);\n```\n\nIn the example above we use the `cpuid` instruction to get the L1 cache size.\nThis instruction writes to `eax`, `ebx`, `ecx`, and `edx`, but for the cache size we only care about the contents of `ebx` and `ecx`.\n\nHowever we still need to tell the compiler that `eax` and `edx` have been modified so that it can save any values that were in these registers before the asm. This is done by declaring these as outputs but with `_` instead of a variable name, which indicates that the output value is to be discarded.\n\nThis can also be used with a general register class (e.g. `reg`) to obtain a scratch register for use inside the asm code:\n\n```rust,allow_fail\n# #![feature(asm)]\n// Multiply x by 6 using shifts and adds\nlet mut x: u64 = 4;\nunsafe {\n asm!(\n \"mov {tmp}, {x}\",\n \"shl {tmp}, 1\",\n \"shl {x}, 2\",\n \"add {x}, {tmp}\",\n x = inout(reg) x,\n tmp = out(reg) _,\n );\n}\nassert_eq!(x, 4 * 6);\n```\n\n## Symbol operands\n\nA special operand type, `sym`, allows you to use the symbol name of a `fn` or `static` in inline assembly code.\nThis allows you to call a function or access a global variable without needing to keep its address in a register.\n\n```rust,allow_fail\n# #![feature(asm)]\nextern \"C\" fn foo(arg: i32) {\n println!(\"arg = {}\", arg);\n}\n\nfn call_foo(arg: i32) {\n unsafe {\n asm!(\n \"call {}\",\n sym foo,\n // 1st argument in rdi, which is caller-saved\n inout(\"rdi\") arg => _,\n // All caller-saved registers must be marked as clobberred\n out(\"rax\") _, out(\"rcx\") _, out(\"rdx\") _, out(\"rsi\") _,\n out(\"r8\") _, out(\"r9\") _, out(\"r10\") _, out(\"r11\") _,\n out(\"xmm0\") _, out(\"xmm1\") _, out(\"xmm2\") _, out(\"xmm3\") _,\n out(\"xmm4\") _, out(\"xmm5\") _, out(\"xmm6\") _, out(\"xmm7\") _,\n out(\"xmm8\") _, out(\"xmm9\") _, out(\"xmm10\") _, out(\"xmm11\") _,\n out(\"xmm12\") _, out(\"xmm13\") _, out(\"xmm14\") _, out(\"xmm15\") _,\n )\n }\n}\n```\n\nNote that the `fn` or `static` item does not need to be public or `#[no_mangle]`:\nthe compiler will automatically insert the appropriate mangled symbol name into the assembly code.\n\n## Register template modifiers\n\nIn some cases, fine control is needed over the way a register name is formatted when inserted into the template string. This is needed when an architecture's assembly language has several names for the same register, each typically being a \"view\" over a subset of the register (e.g. the low 32 bits of a 64-bit register).\n\nBy default the compiler will always choose the name that refers to the full register size (e.g. `rax` on x86-64, `eax` on x86, etc).\n\nThis default can be overriden by using modifiers on the template string operands, just like you would with format strings:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet mut x: u16 = 0xab;\n\nunsafe {\n asm!(\"mov {0:h}, {0:l}\", inout(reg_abcd) x);\n}\n\nassert_eq!(x, 0xabab);\n```\n\nIn this example, we use the `reg_abcd` register class to restrict the register allocator to the 4 legacy x86 register (`ax`, `bx`, `cx`, `dx`) of which the first two bytes can be addressed independently.\n\nLet us assume that the register allocator has chosen to allocate `x` in the `ax` register.\nThe `h` modifier will emit the register name for the high byte of that register and the `l` modifier will emit the register name for the low byte. The asm code will therefore be expanded as `mov ah, al` which copies the low byte of the value into the high byte.\n\nIf you use a smaller data type (e.g. `u16`) with an operand and forget the use template modifiers, the compiler will emit a warning and suggest the correct modifier to use.\n\n## Memory address operands\n\nSometimes assembly instructions require operands passed via memory addresses/memory locations.\nYou have to manually use the memory address syntax specified by the respectively architectures.\nFor example, in x86/x86_64 and intel assembly syntax, you should wrap inputs/outputs in `[]`\nto indicate they are memory operands:\n\n```rust,allow_fail\n# #![feature(asm, llvm_asm)]\n# fn load_fpu_control_word(control: u16) {\nunsafe {\n asm!(\"fldcw [{}]\", in(reg) &control, options(nostack));\n\n // Previously this would have been written with the deprecated `llvm_asm!` like this\n llvm_asm!(\"fldcw $0\" :: \"m\" (control) :: \"volatile\");\n}\n# }\n```\n\n## Options\n\nBy default, an inline assembly block is treated the same way as an external FFI function call with a custom calling convention: it may read/write memory, have observable side effects, etc. However in many cases, it is desirable to give the compiler more information about what the assembly code is actually doing so that it can optimize better.\n\nLet's take our previous example of an `add` instruction:\n\n```rust,allow_fail\n# #![feature(asm)]\nlet mut a: u64 = 4;\nlet b: u64 = 4;\nunsafe {\n asm!(\n \"add {0}, {1}\",\n inlateout(reg) a, in(reg) b,\n options(pure, nomem, nostack),\n );\n}\nassert_eq!(a, 8);\n```\n\nOptions can be provided as an optional final argument to the `asm!` macro. We specified three options here:\n- `pure` means that the asm code has no observable side effects and that its output depends only on its inputs. This allows the compiler optimizer to call the inline asm fewer times or even eliminate it entirely.\n- `nomem` means that the asm code does not read or write to memory. By default the compiler will assume that inline assembly can read or write any memory address that is accessible to it (e.g. through a pointer passed as an operand, or a global).\n- `nostack` means that the asm code does not push any data onto the stack. This allows the compiler to use optimizations such as the stack red zone on x86-64 to avoid stack pointer adjustments.\n\nThese allow the compiler to better optimize code using `asm!`, for example by eliminating pure `asm!` blocks whose outputs are not needed.\n\nSee the reference for the full list of available options and their effects.\n\n# Reference-level explanation\n[reference-level-explanation]: #reference-level-explanation\n\nInline assembler is implemented as an unsafe macro `asm!()`.\nThe first argument to this macro is a template string literal used to build the final assembly.\nThe following arguments specify input and output operands.\nWhen required, options are specified as the final argument.\n\nThe following ABNF specifies the general syntax:\n\n```ignore\ndir_spec := \"in\" / \"out\" / \"lateout\" / \"inout\" / \"inlateout\"\nreg_spec := <register class> / \"<explicit register>\"\noperand_expr := expr / \"_\" / expr \"=>\" expr / expr \"=>\" \"_\"\nreg_operand := dir_spec \"(\" reg_spec \")\" operand_expr\noperand := reg_operand / \"const\" const_expr / \"sym\" path\noption := \"pure\" / \"nomem\" / \"readonly\" / \"preserves_flags\" / \"noreturn\" / \"nostack\" / \"att_syntax\"\noptions := \"options(\" option *[\",\" option] [\",\"] \")\"\nasm := \"asm!(\" format_string *(\",\" format_string) *(\",\" [ident \"=\"] operand) [\",\" options] [\",\"] \")\"\n```\n\nThe macro will initially be supported only on ARM, AArch64, Hexagon, x86, x86-64 and RISC-V targets. Support for more targets may be added in the future. The compiler will emit an error if `asm!` is used on an unsupported target.\n\n[format-syntax]: https://doc.rust-lang.org/std/fmt/#syntax\n\n## Template string arguments\n\nThe assembler template uses the same syntax as [format strings][format-syntax] (i.e. placeholders are specified by curly braces). The corresponding arguments are accessed in order, by index, or by name. However, implicit named arguments (introduced by [RFC #2795][rfc-2795]) are not supported.\n\nAn `asm!` invocation may have one or more template string arguments; an `asm!` with multiple template string arguments is treated as if all the strings were concatenated with a `\\n` between them. The expected usage is for each template string argument to correspond to a line of assembly code. All template string arguments must appear before any other arguments.\n\nAs with format strings, named arguments must appear after positional arguments. Explicit register operands must appear at the end of the operand list, after named arguments if any.\n\nExplicit register operands cannot be used by placeholders in the template string. All other named and positional operands must appear at least once in the template string, otherwise a compiler error is generated.\n\nThe exact assembly code syntax is target-specific and opaque to the compiler except for the way operands are substituted into the template string to form the code passed to the assembler.\n\nThe 5 targets specified in this RFC (x86, ARM, AArch64, RISC-V, Hexagon) all use the assembly code syntax of the GNU assembler (GAS). On x86, the `.intel_syntax noprefix` mode of GAS is used by default. On ARM, the `.syntax unified` mode is used. These targets impose an additional restriction on the assembly code: any assembler state (e.g. the current section which can be changed with `.section`) must be restored to its original value at the end of the asm string. Assembly code that does not conform to the GAS syntax will result in assembler-specific behavior.\n\n[rfc-2795]: https://github.com/rust-lang/rfcs/pull/2795\n\n## Operand type\n\nSeveral types of operands are supported:\n\n* `in(<reg>) <expr>`\n - `<reg>` can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.\n - The allocated register will contain the value of `<expr>` at the start of the asm code.\n - The allocated register must contain the same value at the end of the asm code (except if a `lateout` is allocated to the same register).\n* `out(<reg>) <expr>`\n - `<reg>` can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.\n - The allocated register will contain an undefined value at the start of the asm code.\n - `<expr>` must be a (possibly uninitialized) place expression, to which the contents of the allocated register is written to at the end of the asm code.\n - An underscore (`_`) may be specified instead of an expression, which will cause the contents of the register to be discarded at the end of the asm code (effectively acting as a clobber).\n* `lateout(<reg>) <expr>`\n - Identical to `out` except that the register allocator can reuse a register allocated to an `in`.\n - You should only write to the register after all inputs are read, otherwise you may clobber an input.\n* `inout(<reg>) <expr>`\n - `<reg>` can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.\n - The allocated register will contain the value of `<expr>` at the start of the asm code.\n - `<expr>` must be a mutable initialized place expression, to which the contents of the allocated register is written to at the end of the asm code.\n* `inout(<reg>) <in expr> => <out expr>`\n - Same as `inout` except that the initial value of the register is taken from the value of `<in expr>`.\n - `<out expr>` must be a (possibly uninitialized) place expression, to which the contents of the allocated register is written to at the end of the asm code.\n - An underscore (`_`) may be specified instead of an expression for `<out expr>`, which will cause the contents of the register to be discarded at the end of the asm code (effectively acting as a clobber).\n - `<in expr>` and `<out expr>` may have different types.\n* `inlateout(<reg>) <expr>` / `inlateout(<reg>) <in expr> => <out expr>`\n - Identical to `inout` except that the register allocator can reuse a register allocated to an `in` (this can happen if the compiler knows the `in` has the same initial value as the `inlateout`).\n - You should only write to the register after all inputs are read, otherwise you may clobber an input.\n* `const <expr>`\n - `<expr>` must be an integer or floating-point constant expression.\n - The value of the expression is formatted as a string and substituted directly into the asm template string.\n* `sym <path>`\n - `<path>` must refer to a `fn` or `static`.\n - A mangled symbol name referring to the item is substituted into the asm template string.\n - The substituted string does not include any modifiers (e.g. GOT, PLT, relocations, etc).\n - `<path>` is allowed to point to a `#[thread_local]` static, in which case the asm code can combine the symbol with relocations (e.g. `@plt`, `@TPOFF`) to read from thread-local data.\n\nOperand expressions are evaluated from left to right, just like function call arguments. After the `asm!` has executed, outputs are written to in left to right order. This is significant if two outputs point to the same place: that place will contain the value of the rightmost output.\n\n## Register operands\n\nInput and output operands can be specified either as an explicit register or as a register class from which the register allocator can select a register. Explicit registers are specified as string literals (e.g. `\"eax\"`) while register classes are specified as identifiers (e.g. `reg`). Using string literals for register names enables support for architectures that use special characters in register names, such as MIPS (`$0`, `$1`, etc).\n\nNote that explicit registers treat register aliases (e.g. `r14` vs `lr` on ARM) and smaller views of a register (e.g. `eax` vs `rax`) as equivalent to the base register. It is a compile-time error to use the same explicit register for two input operands or two output operands. Additionally, it is also a compile-time error to use overlapping registers (e.g. ARM VFP) in input operands or in output operands.\n\nOnly the following types are allowed as operands for inline assembly:\n- Integers (signed and unsigned)\n- Floating-point numbers\n- Pointers (thin only)\n- Function pointers\n- SIMD vectors (structs defined with `#[repr(simd)]` and which implement `Copy`). This includes architecture-specific vector types defined in `std::arch` such as `__m128` (x86) or `int8x16_t` (ARM).\n\nHere is the list of currently supported register classes:\n\n| Architecture | Register class | Registers | LLVM constraint code |\n| ------------ | -------------- | --------- | -------------------- |\n| x86 | `reg` | `ax`, `bx`, `cx`, `dx`, `si`, `di`, `r[8-15]` (x86-64 only) | `r` |\n| x86 | `reg_abcd` | `ax`, `bx`, `cx`, `dx` | `Q` |\n| x86-32 | `reg_byte` | `al`, `bl`, `cl`, `dl`, `ah`, `bh`, `ch`, `dh` | `q` |\n| x86-64 | `reg_byte` | `al`, `bl`, `cl`, `dl`, `sil`, `dil`, `r[8-15]b`, `ah`\\*, `bh`\\*, `ch`\\*, `dh`\\* | `q` |\n| x86 | `xmm_reg` | `xmm[0-7]` (x86) `xmm[0-15]` (x86-64) | `x` |\n| x86 | `ymm_reg` | `ymm[0-7]` (x86) `ymm[0-15]` (x86-64) | `x` |\n| x86 | `zmm_reg` | `zmm[0-7]` (x86) `zmm[0-31]` (x86-64) | `v` |\n| x86 | `kreg` | `k[1-7]` | `Yk` |\n| AArch64 | `reg` | `x[0-28]`, `x30` | `r` |\n| AArch64 | `vreg` | `v[0-31]` | `w` |\n| AArch64 | `vreg_low16` | `v[0-15]` | `x` |\n| ARM | `reg` | `r[0-5]` `r7`\\*, `r[8-10]`, `r11`\\*, `r12`, `r14` | `r` |\n| ARM (Thumb) | `reg_thumb` | `r[0-r7]` | `l` |\n| ARM (ARM) | `reg_thumb` | `r[0-r10]`, `r12`, `r14` | `l` |\n| ARM | `sreg` | `s[0-31]` | `t` |\n| ARM | `sreg_low16` | `s[0-15]` | `x` |\n| ARM | `dreg` | `d[0-31]` | `w` |\n| ARM | `dreg_low16` | `d[0-15]` | `t` |\n| ARM | `dreg_low8` | `d[0-8]` | `x` |\n| ARM | `qreg` | `q[0-15]` | `w` |\n| ARM | `qreg_low8` | `q[0-7]` | `t` |\n| ARM | `qreg_low4` | `q[0-3]` | `x` |\n| MIPS | `reg` | `$[2-25]` | `r` |\n| MIPS | `freg` | `$f[0-31]` | `f` |\n| NVPTX | `reg16` | None\\* | `h` |\n| NVPTX | `reg32` | None\\* | `r` |\n| NVPTX | `reg64` | None\\* | `l` |\n| RISC-V | `reg` | `x1`, `x[5-7]`, `x[9-15]`, `x[16-31]` (non-RV32E) | `r` |\n| RISC-V | `freg` | `f[0-31]` | `f` |\n| Hexagon | `reg` | `r[0-28]` | `r` |\n\n> **Note**: On x86 we treat `reg_byte` differently from `reg` because the compiler can allocate `al` and `ah` separately whereas `reg` reserves the whole register.\n>\n> Note #2: On x86-64 the high byte registers (e.g. `ah`) are only available when used as an explicit register. Specifying the `reg_byte` register class for an operand will always allocate a low byte register.\n>\n> Note #3: NVPTX doesn't have a fixed register set, so named registers are not supported.\n>\n> Note #4: On ARM the frame pointer is either `r7` or `r11` depending on the platform.\n\nAdditional register classes may be added in the future based on demand (e.g. MMX, x87, etc).\n\nEach register class has constraints on which value types they can be used with. This is necessary because the way a value is loaded into a register depends on its type. For example, on big-endian systems, loading a `i32x4` and a `i8x16` into a SIMD register may result in different register contents even if the byte-wise memory representation of both values is identical. The availability of supported types for a particular register class may depend on what target features are currently enabled.\n\n| Architecture | Register class | Target feature | Allowed types |\n| ------------ | -------------- | -------------- | ------------- |\n| x86-32 | `reg` | None | `i16`, `i32`, `f32` |\n| x86-64 | `reg` | None | `i16`, `i32`, `f32`, `i64`, `f64` |\n| x86 | `reg_byte` | None | `i8` |\n| x86 | `xmm_reg` | `sse` | `i32`, `f32`, `i64`, `f64`, <br> `i8x16`, `i16x8`, `i32x4`, `i64x2`, `f32x4`, `f64x2` |\n| x86 | `ymm_reg` | `avx` | `i32`, `f32`, `i64`, `f64`, <br> `i8x16`, `i16x8`, `i32x4`, `i64x2`, `f32x4`, `f64x2` <br> `i8x32`, `i16x16`, `i32x8`, `i64x4`, `f32x8`, `f64x4` |\n| x86 | `zmm_reg` | `avx512f` | `i32`, `f32`, `i64`, `f64`, <br> `i8x16`, `i16x8`, `i32x4`, `i64x2`, `f32x4`, `f64x2` <br> `i8x32`, `i16x16`, `i32x8`, `i64x4`, `f32x8`, `f64x4` <br> `i8x64`, `i16x32`, `i32x16`, `i64x8`, `f32x16`, `f64x8` |\n| x86 | `kreg` | `axv512f` | `i8`, `i16` |\n| x86 | `kreg` | `axv512bw` | `i32`, `i64` |\n| AArch64 | `reg` | None | `i8`, `i16`, `i32`, `f32`, `i64`, `f64` |\n| AArch64 | `vreg` | `fp` | `i8`, `i16`, `i32`, `f32`, `i64`, `f64`, <br> `i8x8`, `i16x4`, `i32x2`, `i64x1`, `f32x2`, `f64x1`, <br> `i8x16`, `i16x8`, `i32x4`, `i64x2`, `f32x4`, `f64x2` |\n| ARM | `reg` | None | `i8`, `i16`, `i32`, `f32` |\n| ARM | `sreg` | `vfp2` | `i32`, `f32` |\n| ARM | `dreg` | `vfp2` | `i64`, `f64`, `i8x8`, `i16x4`, `i32x2`, `i64x1`, `f32x2` |\n| ARM | `qreg` | `neon` | `i8x16`, `i16x8`, `i32x4`, `i64x2`, `f32x4` |\n| MIPS32 | `reg` | None | `i8`, `i16`, `i32`, `f32` |\n| MIPS32 | `freg` | None | `f32`, `f64` |\n| MIPS64 | `reg` | None | `i8`, `i16`, `i32`, `i64`, `f32`, `f64` |\n| MIPS64 | `freg` | None | `f32`, `f64` |\n| NVPTX | `reg16` | None | `i8`, `i16` |\n| NVPTX | `reg32` | None | `i8`, `i16`, `i32`, `f32` |\n| NVPTX | `reg64` | None | `i8`, `i16`, `i32`, `f32`, `i64`, `f64` |\n| RISC-V32 | `reg` | None | `i8`, `i16`, `i32`, `f32` |\n| RISC-V64 | `reg` | None | `i8`, `i16`, `i32`, `f32`, `i64`, `f64` |\n| RISC-V | `freg` | `f` | `f32` |\n| RISC-V | `freg` | `d` | `f64` |\n| Hexagon | `reg` | None | `i8`, `i16`, `i32`, `f32` |\n\n> **Note**: For the purposes of the above table pointers, function pointers and `isize`/`usize` are treated as the equivalent integer type (`i16`/`i32`/`i64` depending on the target).\n\nIf a value is of a smaller size than the register it is allocated in then the upper bits of that register will have an undefined value for inputs and will be ignored for outputs. The only exception is the `freg` register class on RISC-V where `f32` values are NaN-boxed in a `f64` as required by the RISC-V architecture.\n\nWhen separate input and output expressions are specified for an `inout` operand, both expressions must have the same type. The only exception is if both operands are pointers or integers, in which case they are only required to have the same size. This restriction exists because the register allocators in LLVM and GCC sometimes cannot handle tied operands with different types.\n\n## Register names\n\nSome registers have multiple names. These are all treated by the compiler as identical to the base register name. Here is the list of all supported register aliases:\n\n| Architecture | Base register | Aliases |\n| ------------ | ------------- | ------- |\n| x86 | `ax` | `eax`, `rax` |\n| x86 | `bx` | `ebx`, `rbx` |\n| x86 | `cx` | `ecx`, `rcx` |\n| x86 | `dx` | `edx`, `rdx` |\n| x86 | `si` | `esi`, `rsi` |\n| x86 | `di` | `edi`, `rdi` |\n| x86 | `bp` | `bpl`, `ebp`, `rbp` |\n| x86 | `sp` | `spl`, `esp`, `rsp` |\n| x86 | `ip` | `eip`, `rip` |\n| x86 | `st(0)` | `st` |\n| x86 | `r[8-15]` | `r[8-15]b`, `r[8-15]w`, `r[8-15]d` |\n| x86 | `xmm[0-31]` | `ymm[0-31]`, `zmm[0-31]` |\n| AArch64 | `x[0-30]` | `w[0-30]` |\n| AArch64 | `x29` | `fp` |\n| AArch64 | `x30` | `lr` |\n| AArch64 | `sp` | `wsp` |\n| AArch64 | `xzr` | `wzr` |\n| AArch64 | `v[0-31]` | `b[0-31]`, `h[0-31]`, `s[0-31]`, `d[0-31]`, `q[0-31]` |\n| ARM | `r[0-3]` | `a[1-4]` |\n| ARM | `r[4-9]` | `v[1-6]` |\n| ARM | `r9` | `rfp` |\n| ARM | `r10` | `sl` |\n| ARM | `r11` | `fp` |\n| ARM | `r12` | `ip` |\n| ARM | `r13` | `sp` |\n| ARM | `r14` | `lr` |\n| ARM | `r15` | `pc` |\n| RISC-V | `x0` | `zero` |\n| RISC-V | `x1` | `ra` |\n| RISC-V | `x2` | `sp` |\n| RISC-V | `x3` | `gp` |\n| RISC-V | `x4` | `tp` |\n| RISC-V | `x[5-7]` | `t[0-2]` |\n| RISC-V | `x8` | `fp`, `s0` |\n| RISC-V | `x9` | `s1` |\n| RISC-V | `x[10-17]` | `a[0-7]` |\n| RISC-V | `x[18-27]` | `s[2-11]` |\n| RISC-V | `x[28-31]` | `t[3-6]` |\n| RISC-V | `f[0-7]` | `ft[0-7]` |\n| RISC-V | `f[8-9]` | `fs[0-1]` |\n| RISC-V | `f[10-17]` | `fa[0-7]` |\n| RISC-V | `f[18-27]` | `fs[2-11]` |\n| RISC-V | `f[28-31]` | `ft[8-11]` |\n| Hexagon | `r29` | `sp` |\n| Hexagon | `r30` | `fr` |\n| Hexagon | `r31` | `lr` |\n\nSome registers cannot be used for input or output operands:\n\n| Architecture | Unsupported register | Reason |\n| ------------ | -------------------- | ------ |\n| All | `sp` | The stack pointer must be restored to its original value at the end of an asm code block. |\n| All | `bp` (x86), `x29` (AArch64), `x8` (RISC-V), `fr` (Hexagon), `$fp` (MIPS) | The frame pointer cannot be used as an input or output. |\n| ARM | `r7` or `r11` | On ARM the frame pointer can be either `r7` or `r11` depending on the target. The frame pointer cannot be used as an input or output. |\n| ARM | `r6` | `r6` is used internally by LLVM as a base pointer and therefore cannot be used as an input or output. |\n| x86 | `k0` | This is a constant zero register which can't be modified. |\n| x86 | `ip` | This is the program counter, not a real register. |\n| x86 | `mm[0-7]` | MMX registers are not currently supported (but may be in the future). |\n| x86 | `st([0-7])` | x87 registers are not currently supported (but may be in the future). |\n| AArch64 | `xzr` | This is a constant zero register which can't be modified. |\n| ARM | `pc` | This is the program counter, not a real register. |\n| MIPS | `$0` or `$zero` | This is a constant zero register which can't be modified. |\n| MIPS | `$1` or `$at` | Reserved for assembler. |\n| MIPS | `$26`/`$k0`, `$27`/`$k1` | OS-reserved registers. |\n| MIPS | `$28`/`$gp` | Global pointer cannot be used as inputs or outputs. |\n| MIPS | `$ra` | Return address cannot be used as inputs or outputs. |\n| RISC-V | `x0` | This is a constant zero register which can't be modified. |\n| RISC-V | `gp`, `tp` | These registers are reserved and cannot be used as inputs or outputs. |\n| Hexagon | `lr` | This is the link register which cannot be used as an input or output. |\n\nIn some cases LLVM will allocate a \"reserved register\" for `reg` operands even though this register cannot be explicitly specified. Assembly code making use of reserved registers should be careful since `reg` operands may alias with those registers. Reserved registers are:\n- The frame pointer on all architectures.\n- `r6` on ARM.\n\n## Template modifiers\n\nThe placeholders can be augmented by modifiers which are specified after the `:` in the curly braces. These modifiers do not affect register allocation, but change the way operands are formatted when inserted into the template string. Only one modifier is allowed per template placeholder.\n\nThe supported modifiers are a subset of LLVM's (and GCC's) [asm template argument modifiers][llvm-argmod], but do not use the same letter codes.\n\n| Architecture | Register class | Modifier | Example output | LLVM modifier |\n| ------------ | -------------- | -------- | -------------- | ------------- |\n| x86-32 | `reg` | None | `eax` | `k` |\n| x86-64 | `reg` | None | `rax` | `q` |\n| x86-32 | `reg_abcd` | `l` | `al` | `b` |\n| x86-64 | `reg` | `l` | `al` | `b` |\n| x86 | `reg_abcd` | `h` | `ah` | `h` |\n| x86 | `reg` | `x` | `ax` | `w` |\n| x86 | `reg` | `e` | `eax` | `k` |\n| x86-64 | `reg` | `r` | `rax` | `q` |\n| x86 | `reg_byte` | None | `al` / `ah` | None |\n| x86 | `xmm_reg` | None | `xmm0` | `x` |\n| x86 | `ymm_reg` | None | `ymm0` | `t` |\n| x86 | `zmm_reg` | None | `zmm0` | `g` |\n| x86 | `*mm_reg` | `x` | `xmm0` | `x` |\n| x86 | `*mm_reg` | `y` | `ymm0` | `t` |\n| x86 | `*mm_reg` | `z` | `zmm0` | `g` |\n| x86 | `kreg` | None | `k1` | None |\n| AArch64 | `reg` | None | `x0` | `x` |\n| AArch64 | `reg` | `w` | `w0` | `w` |\n| AArch64 | `reg` | `x` | `x0` | `x` |\n| AArch64 | `vreg` | None | `v0` | None |\n| AArch64 | `vreg` | `v` | `v0` | None |\n| AArch64 | `vreg` | `b` | `b0` | `b` |\n| AArch64 | `vreg` | `h` | `h0` | `h` |\n| AArch64 | `vreg` | `s` | `s0` | `s` |\n| AArch64 | `vreg` | `d` | `d0` | `d` |\n| AArch64 | `vreg` | `q` | `q0` | `q` |\n| ARM | `reg` | None | `r0` | None |\n| ARM | `sreg` | None | `s0` | None |\n| ARM | `dreg` | None | `d0` | `P` |\n| ARM | `qreg` | None | `q0` | `q` |\n| ARM | `qreg` | `e` / `f` | `d0` / `d1` | `e` / `f` |\n| MIPS | `reg` | None | `$2` | None |\n| MIPS | `freg` | None | `$f0` | None |\n| NVPTX | `reg16` | None | `rs0` | None |\n| NVPTX | `reg32` | None | `r0` | None |\n| NVPTX | `reg64` | None | `rd0` | None |\n| RISC-V | `reg` | None | `x1` | None |\n| RISC-V | `freg` | None | `f0` | None |\n| Hexagon | `reg` | None | `r0` | None |\n\n> Notes:\n> - on ARM `e` / `f`: this prints the low or high doubleword register name of a NEON quad (128-bit) register.\n> - on x86: our behavior for `reg` with no modifiers differs from what GCC does. GCC will infer the modifier based on the operand value type, while we default to the full register size.\n> - on x86 `xmm_reg`: the `x`, `t` and `g` LLVM modifiers are not yet implemented in LLVM (they are supported by GCC only), but this should be a simple change.\n\nAs stated in the previous section, passing an input value smaller than the register width will result in the upper bits of the register containing undefined values. This is not a problem if the inline asm only accesses the lower bits of the register, which can be done by using a template modifier to use a subregister name in the asm code (e.g. `ax` instead of `rax`). Since this an easy pitfall, the compiler will suggest a template modifier to use where appropriate given the input type. If all references to an operand already have modifiers then the warning is suppressed for that operand.\n\n[llvm-argmod]: http://llvm.org/docs/LangRef.html#asm-template-argument-modifiers\n\n## Options\n\nFlags are used to further influence the behavior of the inline assembly block.\nCurrently the following options are defined:\n- `pure`: The `asm` block has no side effects, and its outputs depend only on its direct inputs (i.e. the values themselves, not what they point to) or values read from memory (unless the `nomem` options is also set). This allows the compiler to execute the `asm` block fewer times than specified in the program (e.g. by hoisting it out of a loop) or even eliminate it entirely if the outputs are not used.\n- `nomem`: The `asm` blocks does not read or write to any memory. This allows the compiler to cache the values of modified global variables in registers across the `asm` block since it knows that they are not read or written to by the `asm`.\n- `readonly`: The `asm` block does not write to any memory. This allows the compiler to cache the values of unmodified global variables in registers across the `asm` block since it knows that they are not written to by the `asm`.\n- `preserves_flags`: The `asm` block does not modify the flags register (defined in the rules below). This allows the compiler to avoid recomputing the condition flags after the `asm` block.\n- `noreturn`: The `asm` block never returns, and its return type is defined as `!` (never). Behavior is undefined if execution falls through past the end of the asm code. A `noreturn` asm block behaves just like a function which doesn't return; notably, local variables in scope are not dropped before it is invoked.\n- `nostack`: The `asm` block does not push data to the stack, or write to the stack red-zone (if supported by the target). If this option is *not* used then the stack pointer is guaranteed to be suitably aligned (according to the target ABI) for a function call.\n- `att_syntax`: This option is only valid on x86, and causes the assembler to use the `.att_syntax prefix` mode of the GNU assembler. Register operands are substituted in with a leading `%`.\n\nThe compiler performs some additional checks on options:\n- The `nomem` and `readonly` options are mutually exclusive: it is a compile-time error to specify both.\n- The `pure` option must be combined with either the `nomem` or `readonly` options, otherwise a compile-time error is emitted.\n- It is a compile-time error to specify `pure` on an asm block with no outputs or only discarded outputs (`_`).\n- It is a compile-time error to specify `noreturn` on an asm block with outputs.\n\n## Rules for inline assembly\n\n- Any registers not specified as inputs will contain an undefined value on entry to the asm block.\n - An \"undefined value\" in the context of inline assembly means that the register can (non-deterministically) have any one of the possible values allowed by the architecture. Notably it is not the same as an LLVM `undef` which can have a different value every time you read it (since such a concept does not exist in assembly code).\n- Any registers not specified as outputs must have the same value upon exiting the asm block as they had on entry, otherwise behavior is undefined.\n - This only applies to registers which can be specified as an input or output. Other registers follow target-specific rules.\n - Note that a `lateout` may be allocated to the same register as an `in`, in which case this rule does not apply. Code should not rely on this however since it depends on the results of register allocation.\n- Behavior is undefined if execution unwinds out of an asm block.\n - This also applies if the assembly code calls a function which then unwinds.\n- The set of memory locations that assembly code is allowed the read and write are the same as those allowed for an FFI function.\n - Refer to the unsafe code guidelines for the exact rules.\n - If the `readonly` option is set, then only memory reads are allowed.\n - If the `nomem` option is set then no reads or writes to memory are allowed.\n - These rules do not apply to memory which is private to the asm code, such as stack space allocated within the asm block.\n- The compiler cannot assume that the instructions in the asm are the ones that will actually end up executed.\n - This effectively means that the compiler must treat the `asm!` as a black box and only take the interface specification into account, not the instructions themselves.\n - Runtime code patching is allowed, via target-specific mechanisms (outside the scope of this RFC).\n- Unless the `nostack` option is set, asm code is allowed to use stack space below the stack pointer.\n - On entry to the asm block the stack pointer is guaranteed to be suitably aligned (according to the target ABI) for a function call.\n - You are responsible for making sure you don't overflow the stack (e.g. use stack probing to ensure you hit a guard page).\n - You should adjust the stack pointer when allocating stack memory as required by the target ABI.\n - The stack pointer must be restored to its original value before leaving the asm block.\n- If the `noreturn` option is set then behavior is undefined if execution falls through to the end of the asm block.\n- If the `pure` option is set then behavior is undefined if the `asm` has side-effects other than its direct outputs. Behavior is also undefined if two executions of the `asm` code with the same inputs result in different outputs.\n - When used with the `nomem` option, \"inputs\" are just the direct inputs of the `asm!`.\n - When used with the `readonly` option, \"inputs\" comprise the direct inputs of the `asm!` and any memory that the `asm!` block is allowed to read.\n- These flags registers must be restored upon exiting the asm block if the `preserves_flags` option is set:\n - x86\n - Status flags in `EFLAGS` (CF, PF, AF, ZF, SF, OF).\n - Floating-point status word (all).\n - Floating-point exception flags in `MXCSR` (PE, UE, OE, ZE, DE, IE).\n - ARM\n - Condition flags in `CPSR` (N, Z, C, V)\n - Saturation flag in `CPSR` (Q)\n - Greater than or equal flags in `CPSR` (GE).\n - Condition flags in `FPSCR` (N, Z, C, V)\n - Saturation flag in `FPSCR` (QC)\n - Floating-point exception flags in `FPSCR` (IDC, IXC, UFC, OFC, DZC, IOC).\n - AArch64\n - Condition flags (`NZCV` register).\n - Floating-point status (`FPSR` register).\n - RISC-V\n - Floating-point exception flags in `fcsr` (`fflags`).\n- On x86, the direction flag (DF in `EFLAGS`) is clear on entry to an asm block and must be clear on exit.\n - Behavior is undefined if the direction flag is set on exiting an asm block.\n- The requirement of restoring the stack pointer and non-output registers to their original value only applies when exiting an `asm!` block.\n - This means that `asm!` blocks that never return (even if not marked `noreturn`) don't need to preserve these registers.\n - When returning to a different `asm!` block than you entered (e.g. for context switching), these registers must contain the value they had upon entering the `asm!` block that you are *exiting*.\n - You cannot exit an `asm!` block that has not been entered. Neither can you exit an `asm!` block that has already been exited.\n - You are responsible for switching any target-specific state (e.g. thread-local storage, stack bounds).\n - The set of memory locations that you may access is the intersection of those allowed by the `asm!` blocks you entered and exited.\n- You cannot assume that an `asm!` block will appear exactly once in the output binary. The compiler is allowed to instantiate multiple copies of the `asm!` block, for example when the function containing it is inlined in multiple places.\n - As a consequence, you should only use [local labels] inside inline assembly code. Defining symbols in assembly code may lead to assembler and/or linker errors due to duplicate symbol definitions.\n\n> **Note**: As a general rule, the flags covered by `preserves_flags` are those which are *not* preserved when performing a function call.\n\n[local labels]: https://sourceware.org/binutils/docs/as/Symbol-Names.html#Local-Labels\n" } , LintCompletion { label : "allocator_api" , description : "# `allocator_api`\n\nThe tracking issue for this feature is [#32838]\n\n[#32838]: https://github.com/rust-lang/rust/issues/32838\n\n------------------------\n\nSometimes you want the memory for one collection to use a different\nallocator than the memory for another collection. In this case,\nreplacing the global allocator is not a workable option. Instead,\nyou need to pass in an instance of an `AllocRef` to each collection\nfor which you want a custom allocator.\n\nTBD\n" } , LintCompletion { label : "set_stdio" , description : "# `set_stdio`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "libstd_sys_internals" , description : "# `libstd_sys_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "concat_idents" , description : "# `concat_idents`\n\nThe tracking issue for this feature is: [#29599]\n\n[#29599]: https://github.com/rust-lang/rust/issues/29599\n\n------------------------\n\nThe `concat_idents` feature adds a macro for concatenating multiple identifiers\ninto one identifier.\n\n## Examples\n\n```rust\n#![feature(concat_idents)]\n\nfn main() {\n fn foobar() -> u32 { 23 }\n let f = concat_idents!(foo, bar);\n assert_eq!(f(), 23);\n}\n```" } , LintCompletion { label : "format_args_capture" , description : "# `format_args_capture`\n\nThe tracking issue for this feature is: [#67984]\n\n[#67984]: https://github.com/rust-lang/rust/issues/67984\n\n------------------------\n\nEnables `format_args!` (and macros which use `format_args!` in their implementation, such\nas `format!`, `print!` and `panic!`) to capture variables from the surrounding scope.\nThis avoids the need to pass named parameters when the binding in question\nalready exists in scope.\n\n```rust\n#![feature(format_args_capture)]\n\nlet (person, species, name) = (\"Charlie Brown\", \"dog\", \"Snoopy\");\n\n// captures named argument `person`\nprint!(\"Hello {person}\");\n\n// captures named arguments `species` and `name`\nformat!(\"The {species}'s name is {name}.\");\n```\n\nThis also works for formatting parameters such as width and precision:\n\n```rust\n#![feature(format_args_capture)]\n\nlet precision = 2;\nlet s = format!(\"{:.precision$}\", 1.324223);\n\nassert_eq!(&s, \"1.32\");\n```\n\nA non-exhaustive list of macros which benefit from this functionality include:\n- `format!`\n- `print!` and `println!`\n- `eprint!` and `eprintln!`\n- `write!` and `writeln!`\n- `panic!`\n- `unreachable!`\n- `unimplemented!`\n- `todo!`\n- `assert!` and similar\n- macros in many thirdparty crates, such as `log`\n" } , LintCompletion { label : "is_sorted" , description : "# `is_sorted`\n\nThe tracking issue for this feature is: [#53485]\n\n[#53485]: https://github.com/rust-lang/rust/issues/53485\n\n------------------------\n\nAdd the methods `is_sorted`, `is_sorted_by` and `is_sorted_by_key` to `[T]`;\nadd the methods `is_sorted`, `is_sorted_by` and `is_sorted_by_key` to\n`Iterator`.\n" } , LintCompletion { label : "sort_internals" , description : "# `sort_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "c_variadic" , description : "# `c_variadic`\n\nThe tracking issue for this feature is: [#44930]\n\n[#44930]: https://github.com/rust-lang/rust/issues/44930\n\n------------------------\n\nThe `c_variadic` library feature exposes the `VaList` structure,\nRust's analogue of C's `va_list` type.\n\n## Examples\n\n```rust\n#![feature(c_variadic)]\n\nuse std::ffi::VaList;\n\npub unsafe extern \"C\" fn vadd(n: usize, mut args: VaList) -> usize {\n let mut sum = 0;\n for _ in 0..n {\n sum += args.arg::<usize>();\n }\n sum\n}\n```\n" } , LintCompletion { label : "trace_macros" , description : "# `trace_macros`\n\nThe tracking issue for this feature is [#29598].\n\n[#29598]: https://github.com/rust-lang/rust/issues/29598\n\n------------------------\n\nWith `trace_macros` you can trace the expansion of macros in your code.\n\n## Examples\n\n```rust\n#![feature(trace_macros)]\n\nfn main() {\n trace_macros!(true);\n println!(\"Hello, Rust!\");\n trace_macros!(false);\n}\n```\n\nThe `cargo build` output:\n\n```txt\nnote: trace_macro\n --> src/main.rs:5:5\n |\n5 | println!(\"Hello, Rust!\");\n | ^^^^^^^^^^^^^^^^^^^^^^^^^\n |\n = note: expanding `println! { \"Hello, Rust!\" }`\n = note: to `print ! ( concat ! ( \"Hello, Rust!\" , \"\\n\" ) )`\n = note: expanding `print! { concat ! ( \"Hello, Rust!\" , \"\\n\" ) }`\n = note: to `$crate :: io :: _print ( format_args ! ( concat ! ( \"Hello, Rust!\" , \"\\n\" ) )\n )`\n\n Finished dev [unoptimized + debuginfo] target(s) in 0.60 secs\n```\n" } , LintCompletion { label : "c_void_variant" , description : "# `c_void_variant`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "core_panic" , description : "# `core_panic`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "fmt_internals" , description : "# `fmt_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "rt" , description : "# `rt`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "thread_local_internals" , description : "# `thread_local_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "core_intrinsics" , description : "# `core_intrinsics`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "update_panic_count" , description : "# `update_panic_count`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "profiler_runtime_lib" , description : "# `profiler_runtime_lib`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "core_private_bignum" , description : "# `core_private_bignum`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "core_private_diy_float" , description : "# `core_private_diy_float`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "str_internals" , description : "# `str_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "derive_clone_copy" , description : "# `derive_clone_copy`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "fn_traits" , description : "# `fn_traits`\n\nThe tracking issue for this feature is [#29625]\n\nSee Also: [`unboxed_closures`](../language-features/unboxed-closures.md)\n\n[#29625]: https://github.com/rust-lang/rust/issues/29625\n\n----\n\nThe `fn_traits` feature allows for implementation of the [`Fn*`] traits\nfor creating custom closure-like types.\n\n[`Fn*`]: https://doc.rust-lang.org/std/ops/trait.Fn.html\n\n```rust\n#![feature(unboxed_closures)]\n#![feature(fn_traits)]\n\nstruct Adder {\n a: u32\n}\n\nimpl FnOnce<(u32, )> for Adder {\n type Output = u32;\n extern \"rust-call\" fn call_once(self, b: (u32, )) -> Self::Output {\n self.a + b.0\n }\n}\n\nfn main() {\n let adder = Adder { a: 3 };\n assert_eq!(adder(2), 5);\n}\n```\n" } , LintCompletion { label : "fd_read" , description : "# `fd_read`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "windows_net" , description : "# `windows_net`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "derive_eq" , description : "# `derive_eq`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "windows_stdio" , description : "# `windows_stdio`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "test" , description : "# `test`\n\nThe tracking issue for this feature is: None.\n\n------------------------\n\nThe internals of the `test` crate are unstable, behind the `test` flag. The\nmost widely used part of the `test` crate are benchmark tests, which can test\nthe performance of your code. Let's make our `src/lib.rs` look like this\n(comments elided):\n\n```rust,ignore\n#![feature(test)]\n\nextern crate test;\n\npub fn add_two(a: i32) -> i32 {\n a + 2\n}\n\n#[cfg(test)]\nmod tests {\n use super::*;\n use test::Bencher;\n\n #[test]\n fn it_works() {\n assert_eq!(4, add_two(2));\n }\n\n #[bench]\n fn bench_add_two(b: &mut Bencher) {\n b.iter(|| add_two(2));\n }\n}\n```\n\nNote the `test` feature gate, which enables this unstable feature.\n\nWe've imported the `test` crate, which contains our benchmarking support.\nWe have a new function as well, with the `bench` attribute. Unlike regular\ntests, which take no arguments, benchmark tests take a `&mut Bencher`. This\n`Bencher` provides an `iter` method, which takes a closure. This closure\ncontains the code we'd like to benchmark.\n\nWe can run benchmark tests with `cargo bench`:\n\n```bash\n$ cargo bench\n Compiling adder v0.0.1 (file:///home/steve/tmp/adder)\n Running target/release/adder-91b3e234d4ed382a\n\nrunning 2 tests\ntest tests::it_works ... ignored\ntest tests::bench_add_two ... bench: 1 ns/iter (+/- 0)\n\ntest result: ok. 0 passed; 0 failed; 1 ignored; 1 measured\n```\n\nOur non-benchmark test was ignored. You may have noticed that `cargo bench`\ntakes a bit longer than `cargo test`. This is because Rust runs our benchmark\na number of times, and then takes the average. Because we're doing so little\nwork in this example, we have a `1 ns/iter (+/- 0)`, but this would show\nthe variance if there was one.\n\nAdvice on writing benchmarks:\n\n\n* Move setup code outside the `iter` loop; only put the part you want to measure inside\n* Make the code do \"the same thing\" on each iteration; do not accumulate or change state\n* Make the outer function idempotent too; the benchmark runner is likely to run\n it many times\n* Make the inner `iter` loop short and fast so benchmark runs are fast and the\n calibrator can adjust the run-length at fine resolution\n* Make the code in the `iter` loop do something simple, to assist in pinpointing\n performance improvements (or regressions)\n\n## Gotcha: optimizations\n\nThere's another tricky part to writing benchmarks: benchmarks compiled with\noptimizations activated can be dramatically changed by the optimizer so that\nthe benchmark is no longer benchmarking what one expects. For example, the\ncompiler might recognize that some calculation has no external effects and\nremove it entirely.\n\n```rust,ignore\n#![feature(test)]\n\nextern crate test;\nuse test::Bencher;\n\n#[bench]\nfn bench_xor_1000_ints(b: &mut Bencher) {\n b.iter(|| {\n (0..1000).fold(0, |old, new| old ^ new);\n });\n}\n```\n\ngives the following results\n\n```text\nrunning 1 test\ntest bench_xor_1000_ints ... bench: 0 ns/iter (+/- 0)\n\ntest result: ok. 0 passed; 0 failed; 0 ignored; 1 measured\n```\n\nThe benchmarking runner offers two ways to avoid this. Either, the closure that\nthe `iter` method receives can return an arbitrary value which forces the\noptimizer to consider the result used and ensures it cannot remove the\ncomputation entirely. This could be done for the example above by adjusting the\n`b.iter` call to\n\n```rust\n# struct X;\n# impl X { fn iter<T, F>(&self, _: F) where F: FnMut() -> T {} } let b = X;\nb.iter(|| {\n // Note lack of `;` (could also use an explicit `return`).\n (0..1000).fold(0, |old, new| old ^ new)\n});\n```\n\nOr, the other option is to call the generic `test::black_box` function, which\nis an opaque \"black box\" to the optimizer and so forces it to consider any\nargument as used.\n\n```rust\n#![feature(test)]\n\nextern crate test;\n\n# fn main() {\n# struct X;\n# impl X { fn iter<T, F>(&self, _: F) where F: FnMut() -> T {} } let b = X;\nb.iter(|| {\n let n = test::black_box(1000);\n\n (0..n).fold(0, |a, b| a ^ b)\n})\n# }\n```\n\nNeither of these read or modify the value, and are very cheap for small values.\nLarger values can be passed indirectly to reduce overhead (e.g.\n`black_box(&huge_struct)`).\n\nPerforming either of the above changes gives the following benchmarking results\n\n```text\nrunning 1 test\ntest bench_xor_1000_ints ... bench: 131 ns/iter (+/- 3)\n\ntest result: ok. 0 passed; 0 failed; 0 ignored; 1 measured\n```\n\nHowever, the optimizer can still modify a testcase in an undesirable manner\neven when using either of the above.\n" } , LintCompletion { label : "flt2dec" , description : "# `flt2dec`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "libstd_io_internals" , description : "# `libstd_io_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "fd" , description : "# `fd`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "print_internals" , description : "# `print_internals`\n\nThis feature is internal to the Rust compiler and is not intended for general use.\n\n------------------------\n" } , LintCompletion { label : "range_bounds_assert_len" , description : "# `range_bounds_assert_len`\n\nThe tracking issue for this feature is: [#76393]\n\n------------------------\n\nThis adds [`RangeBounds::assert_len`].\n\n[#76393]: https://github.com/rust-lang/rust/issues/76393\n[`RangeBounds::assert_len`]: https://doc.rust-lang.org/nightly/std/ops/trait.RangeBounds.html#method.assert_len\n" } , LintCompletion { label : "try_trait" , description : "# `try_trait`\n\nThe tracking issue for this feature is: [#42327]\n\n[#42327]: https://github.com/rust-lang/rust/issues/42327\n\n------------------------\n\nThis introduces a new trait `Try` for extending the `?` operator to types\nother than `Result` (a part of [RFC 1859]). The trait provides the canonical\nway to _view_ a type in terms of a success/failure dichotomy. This will\nallow `?` to supplant the `try_opt!` macro on `Option` and the `try_ready!`\nmacro on `Poll`, among other things.\n\n[RFC 1859]: https://github.com/rust-lang/rfcs/pull/1859\n\nHere's an example implementation of the trait:\n\n```rust,ignore\n/// A distinct type to represent the `None` value of an `Option`.\n///\n/// This enables using the `?` operator on `Option`; it's rarely useful alone.\n#[derive(Debug)]\n#[unstable(feature = \"try_trait\", issue = \"42327\")]\npub struct None { _priv: () }\n\n#[unstable(feature = \"try_trait\", issue = \"42327\")]\nimpl<T> ops::Try for Option<T> {\n type Ok = T;\n type Error = None;\n\n fn into_result(self) -> Result<T, None> {\n self.ok_or(None { _priv: () })\n }\n\n fn from_ok(v: T) -> Self {\n Some(v)\n }\n\n fn from_error(_: None) -> Self {\n None\n }\n}\n```\n\nNote the `Error` associated type here is a new marker. The `?` operator\nallows interconversion between different `Try` implementers only when\nthe error type can be converted `Into` the error type of the enclosing\nfunction (or catch block). Having a distinct error type (as opposed to\njust `()`, or similar) restricts this to where it's semantically meaningful.\n" }] ;
pub (super) const CLIPPY_LINTS : & [LintCompletion] = & [LintCompletion { label : "clippy::absurd_extreme_comparisons" , description : "Checks for comparisons where one side of the relation is\\neither the minimum or maximum value for its type and warns if it involves a\\ncase that is always true or always false. Only integer and boolean types are\\nchecked." } , LintCompletion { label : "clippy::almost_swapped" , description : "Checks for `foo = bar; bar = foo` sequences." } , LintCompletion { label : "clippy::approx_constant" , description : "Checks for floating point literals that approximate\\nconstants which are defined in\\n[`std::f32::consts`](https://doc.rust-lang.org/stable/std/f32/consts/#constants)\\nor\\n[`std::f64::consts`](https://doc.rust-lang.org/stable/std/f64/consts/#constants),\\nrespectively, suggesting to use the predefined constant." } , LintCompletion { label : "clippy::as_conversions" , description : "Checks for usage of `as` conversions." } , LintCompletion { label : "clippy::assertions_on_constants" , description : "Checks for `assert!(true)` and `assert!(false)` calls." } , LintCompletion { label : "clippy::assign_op_pattern" , description : "Checks for `a = a op b` or `a = b commutative_op a`\\npatterns." } , LintCompletion { label : "clippy::assign_ops" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::async_yields_async" , description : "Checks for async blocks that yield values of types\\nthat can themselves be awaited." } , LintCompletion { label : "clippy::await_holding_lock" , description : "Checks for calls to await while holding a\\nnon-async-aware MutexGuard." } , LintCompletion { label : "clippy::bad_bit_mask" , description : "Checks for incompatible bit masks in comparisons.\\n\\nThe formula for detecting if an expression of the type `_ <bit_op> m\\n<cmp_op> c` (where `<bit_op>` is one of {`&`, `|`} and `<cmp_op>` is one of\\n{`!=`, `>=`, `>`, `!=`, `>=`, `>`}) can be determined from the following\\ntable:\\n\\n|Comparison |Bit Op|Example |is always|Formula |\\n|------------|------|------------|---------|----------------------|\\n|`==` or `!=`| `&` |`x & 2 == 3`|`false` |`c & m != c` |\\n|`<` or `>=`| `&` |`x & 2 < 3` |`true` |`m < c` |\\n|`>` or `<=`| `&` |`x & 1 > 1` |`false` |`m <= c` |\\n|`==` or `!=`| `|` |`x | 1 == 0`|`false` |`c | m != c` |\\n|`<` or `>=`| `|` |`x | 1 < 1` |`false` |`m >= c` |\\n|`<=` or `>` | `|` |`x | 1 > 0` |`true` |`m > c` |" } , LintCompletion { label : "clippy::bind_instead_of_map" , description : "Checks for usage of `_.and_then(|x| Some(y))`, `_.and_then(|x| Ok(y))` or\\n`_.or_else(|x| Err(y))`." } , LintCompletion { label : "clippy::blacklisted_name" , description : "Checks for usage of blacklisted names for variables, such\\nas `foo`." } , LintCompletion { label : "clippy::blanket_clippy_restriction_lints" , description : "Checks for `warn`/`deny`/`forbid` attributes targeting the whole clippy::restriction category." } , LintCompletion { label : "clippy::blocks_in_if_conditions" , description : "Checks for `if` conditions that use blocks containing an\\nexpression, statements or conditions that use closures with blocks." } , LintCompletion { label : "clippy::bool_comparison" , description : "Checks for expressions of the form `x == true`,\\n`x != true` and order comparisons such as `x < true` (or vice versa) and\\nsuggest using the variable directly." } , LintCompletion { label : "clippy::borrow_interior_mutable_const" , description : "Checks if `const` items which is interior mutable (e.g.,\\ncontains a `Cell`, `Mutex`, `AtomicXxxx`, etc.) has been borrowed directly." } , LintCompletion { label : "clippy::borrowed_box" , description : "Checks for use of `&Box<T>` anywhere in the code.\\nCheck the [Box documentation](https://doc.rust-lang.org/std/boxed/index.html) for more information." } , LintCompletion { label : "clippy::box_vec" , description : "Checks for use of `Box<Vec<_>>` anywhere in the code.\\nCheck the [Box documentation](https://doc.rust-lang.org/std/boxed/index.html) for more information." } , LintCompletion { label : "clippy::boxed_local" , description : "Checks for usage of `Box<T>` where an unboxed `T` would\\nwork fine." } , LintCompletion { label : "clippy::builtin_type_shadow" , description : "Warns if a generic shadows a built-in type." } , LintCompletion { label : "clippy::cargo_common_metadata" , description : "Checks to see if all common metadata is defined in\\n`Cargo.toml`. See: https://rust-lang-nursery.github.io/api-guidelines/documentation.html#cargotoml-includes-all-common-metadata-c-metadata" } , LintCompletion { label : "clippy::cast_lossless" , description : "Checks for casts between numerical types that may\\nbe replaced by safe conversion functions." } , LintCompletion { label : "clippy::cast_possible_truncation" , description : "Checks for casts between numerical types that may\\ntruncate large values. This is expected behavior, so the cast is `Allow` by\\ndefault." } , LintCompletion { label : "clippy::cast_possible_wrap" , description : "Checks for casts from an unsigned type to a signed type of\\nthe same size. Performing such a cast is a 'no-op' for the compiler,\\ni.e., nothing is changed at the bit level, and the binary representation of\\nthe value is reinterpreted. This can cause wrapping if the value is too big\\nfor the target signed type. However, the cast works as defined, so this lint\\nis `Allow` by default." } , LintCompletion { label : "clippy::cast_precision_loss" , description : "Checks for casts from any numerical to a float type where\\nthe receiving type cannot store all values from the original type without\\nrounding errors. This possible rounding is to be expected, so this lint is\\n`Allow` by default.\\n\\nBasically, this warns on casting any integer with 32 or more bits to `f32`\\nor any 64-bit integer to `f64`." } , LintCompletion { label : "clippy::cast_ptr_alignment" , description : "Checks for casts from a less-strictly-aligned pointer to a\\nmore-strictly-aligned pointer" } , LintCompletion { label : "clippy::cast_ref_to_mut" , description : "Checks for casts of `&T` to `&mut T` anywhere in the code." } , LintCompletion { label : "clippy::cast_sign_loss" , description : "Checks for casts from a signed to an unsigned numerical\\ntype. In this case, negative values wrap around to large positive values,\\nwhich can be quite surprising in practice. However, as the cast works as\\ndefined, this lint is `Allow` by default." } , LintCompletion { label : "clippy::char_lit_as_u8" , description : "Checks for expressions where a character literal is cast\\nto `u8` and suggests using a byte literal instead." } , LintCompletion { label : "clippy::chars_last_cmp" , description : "Checks for usage of `_.chars().last()` or\\n`_.chars().next_back()` on a `str` to check if it ends with a given char." } , LintCompletion { label : "clippy::chars_next_cmp" , description : "Checks for usage of `.chars().next()` on a `str` to check\\nif it starts with a given char." } , LintCompletion { label : "clippy::checked_conversions" , description : "Checks for explicit bounds checking when casting." } , LintCompletion { label : "clippy::clone_double_ref" , description : "Checks for usage of `.clone()` on an `&&T`." } , LintCompletion { label : "clippy::clone_on_copy" , description : "Checks for usage of `.clone()` on a `Copy` type." } , LintCompletion { label : "clippy::clone_on_ref_ptr" , description : "Checks for usage of `.clone()` on a ref-counted pointer,\\n(`Rc`, `Arc`, `rc::Weak`, or `sync::Weak`), and suggests calling Clone via unified\\nfunction syntax instead (e.g., `Rc::clone(foo)`)." } , LintCompletion { label : "clippy::cmp_nan" , description : "Checks for comparisons to NaN." } , LintCompletion { label : "clippy::cmp_null" , description : "This lint checks for equality comparisons with `ptr::null`" } , LintCompletion { label : "clippy::cmp_owned" , description : "Checks for conversions to owned values just for the sake\\nof a comparison." } , LintCompletion { label : "clippy::cognitive_complexity" , description : "Checks for methods with high cognitive complexity." } , LintCompletion { label : "clippy::collapsible_if" , description : "Checks for nested `if` statements which can be collapsed\\nby `&&`-combining their conditions and for `else { if ... }` expressions\\nthat\\ncan be collapsed to `else if ...`." } , LintCompletion { label : "clippy::comparison_chain" , description : "Checks comparison chains written with `if` that can be\\nrewritten with `match` and `cmp`." } , LintCompletion { label : "clippy::copy_iterator" , description : "Checks for types that implement `Copy` as well as\\n`Iterator`." } , LintCompletion { label : "clippy::create_dir" , description : "Checks usage of `std::fs::create_dir` and suggest using `std::fs::create_dir_all` instead." } , LintCompletion { label : "clippy::crosspointer_transmute" , description : "Checks for transmutes between a type `T` and `*T`." } , LintCompletion { label : "clippy::dbg_macro" , description : "Checks for usage of dbg!() macro." } , LintCompletion { label : "clippy::debug_assert_with_mut_call" , description : "Checks for function/method calls with a mutable\\nparameter in `debug_assert!`, `debug_assert_eq!` and `debug_assert_ne!` macros." } , LintCompletion { label : "clippy::decimal_literal_representation" , description : "Warns if there is a better representation for a numeric literal." } , LintCompletion { label : "clippy::declare_interior_mutable_const" , description : "Checks for declaration of `const` items which is interior\\nmutable (e.g., contains a `Cell`, `Mutex`, `AtomicXxxx`, etc.)." } , LintCompletion { label : "clippy::default_trait_access" , description : "Checks for literal calls to `Default::default()`." } , LintCompletion { label : "clippy::deprecated_cfg_attr" , description : "Checks for `#[cfg_attr(rustfmt, rustfmt_skip)]` and suggests to replace it\\nwith `#[rustfmt::skip]`." } , LintCompletion { label : "clippy::deprecated_semver" , description : "Checks for `#[deprecated]` annotations with a `since`\\nfield that is not a valid semantic version." } , LintCompletion { label : "clippy::deref_addrof" , description : "Checks for usage of `*&` and `*&mut` in expressions." } , LintCompletion { label : "clippy::derive_hash_xor_eq" , description : "Checks for deriving `Hash` but implementing `PartialEq`\\nexplicitly or vice versa." } , LintCompletion { label : "clippy::derive_ord_xor_partial_ord" , description : "Checks for deriving `Ord` but implementing `PartialOrd`\\nexplicitly or vice versa." } , LintCompletion { label : "clippy::disallowed_method" , description : "Lints for specific trait methods defined in clippy.toml" } , LintCompletion { label : "clippy::diverging_sub_expression" , description : "Checks for diverging calls that are not match arms or\\nstatements." } , LintCompletion { label : "clippy::doc_markdown" , description : "Checks for the presence of `_`, `::` or camel-case words\\noutside ticks in documentation." } , LintCompletion { label : "clippy::double_comparisons" , description : "Checks for double comparisons that could be simplified to a single expression." } , LintCompletion { label : "clippy::double_must_use" , description : "Checks for a [`#[must_use]`] attribute without\\nfurther information on functions and methods that return a type already\\nmarked as `#[must_use]`.\\n\\n[`#[must_use]`]: https://doc.rust-lang.org/reference/attributes/diagnostics.html#the-must_use-attribute" } , LintCompletion { label : "clippy::double_neg" , description : "Detects expressions of the form `--x`." } , LintCompletion { label : "clippy::double_parens" , description : "Checks for unnecessary double parentheses." } , LintCompletion { label : "clippy::drop_bounds" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::drop_copy" , description : "Checks for calls to `std::mem::drop` with a value\\nthat derives the Copy trait" } , LintCompletion { label : "clippy::drop_ref" , description : "Checks for calls to `std::mem::drop` with a reference\\ninstead of an owned value." } , LintCompletion { label : "clippy::duplicate_underscore_argument" , description : "Checks for function arguments having the similar names\\ndiffering by an underscore." } , LintCompletion { label : "clippy::duration_subsec" , description : "Checks for calculation of subsecond microseconds or milliseconds\\nfrom other `Duration` methods." } , LintCompletion { label : "clippy::else_if_without_else" , description : "Checks for usage of if expressions with an `else if` branch,\\nbut without a final `else` branch." } , LintCompletion { label : "clippy::empty_enum" , description : "Checks for `enum`s with no variants." } , LintCompletion { label : "clippy::empty_line_after_outer_attr" , description : "Checks for empty lines after outer attributes" } , LintCompletion { label : "clippy::empty_loop" , description : "Checks for empty `loop` expressions." } , LintCompletion { label : "clippy::enum_clike_unportable_variant" , description : "Checks for C-like enumerations that are\\n`repr(isize/usize)` and have values that don't fit into an `i32`." } , LintCompletion { label : "clippy::enum_glob_use" , description : "Checks for `use Enum::*`." } , LintCompletion { label : "clippy::enum_variant_names" , description : "Detects enumeration variants that are prefixed or suffixed\\nby the same characters." } , LintCompletion { label : "clippy::eq_op" , description : "Checks for equal operands to comparison, logical and\\nbitwise, difference and division binary operators (`==`, `>`, etc., `&&`,\\n`||`, `&`, `|`, `^`, `-` and `/`)." } , LintCompletion { label : "clippy::erasing_op" , description : "Checks for erasing operations, e.g., `x * 0`." } , LintCompletion { label : "clippy::eval_order_dependence" , description : "Checks for a read and a write to the same variable where\\nwhether the read occurs before or after the write depends on the evaluation\\norder of sub-expressions." } , LintCompletion { label : "clippy::excessive_precision" , description : "Checks for float literals with a precision greater\\nthan that supported by the underlying type." } , LintCompletion { label : "clippy::exit" , description : "`exit()` terminates the program and doesn't provide a\\nstack trace." } , LintCompletion { label : "clippy::expect_fun_call" , description : "Checks for calls to `.expect(&format!(...))`, `.expect(foo(..))`,\\netc., and suggests to use `unwrap_or_else` instead" } , LintCompletion { label : "clippy::expect_used" , description : "Checks for `.expect()` calls on `Option`s and `Result`s." } , LintCompletion { label : "clippy::expl_impl_clone_on_copy" , description : "Checks for explicit `Clone` implementations for `Copy`\\ntypes." } , LintCompletion { label : "clippy::explicit_counter_loop" , description : "Checks `for` loops over slices with an explicit counter\\nand suggests the use of `.enumerate()`." } , LintCompletion { label : "clippy::explicit_deref_methods" , description : "Checks for explicit `deref()` or `deref_mut()` method calls." } , LintCompletion { label : "clippy::explicit_into_iter_loop" , description : "Checks for loops on `y.into_iter()` where `y` will do, and\\nsuggests the latter." } , LintCompletion { label : "clippy::explicit_iter_loop" , description : "Checks for loops on `x.iter()` where `&x` will do, and\\nsuggests the latter." } , LintCompletion { label : "clippy::explicit_write" , description : "Checks for usage of `write!()` / `writeln()!` which can be\\nreplaced with `(e)print!()` / `(e)println!()`" } , LintCompletion { label : "clippy::extend_from_slice" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::extra_unused_lifetimes" , description : "Checks for lifetimes in generics that are never used\\nanywhere else." } , LintCompletion { label : "clippy::fallible_impl_from" , description : "Checks for impls of `From<..>` that contain `panic!()` or `unwrap()`" } , LintCompletion { label : "clippy::filetype_is_file" , description : "Checks for `FileType::is_file()`." } , LintCompletion { label : "clippy::filter_map" , description : "Checks for usage of `_.filter(_).map(_)`,\\n`_.filter(_).flat_map(_)`, `_.filter_map(_).flat_map(_)` and similar." } , LintCompletion { label : "clippy::filter_map_next" , description : "Checks for usage of `_.filter_map(_).next()`." } , LintCompletion { label : "clippy::filter_next" , description : "Checks for usage of `_.filter(_).next()`." } , LintCompletion { label : "clippy::find_map" , description : "Checks for usage of `_.find(_).map(_)`." } , LintCompletion { label : "clippy::flat_map_identity" , description : "Checks for usage of `flat_map(|x| x)`." } , LintCompletion { label : "clippy::float_arithmetic" , description : "Checks for float arithmetic." } , LintCompletion { label : "clippy::float_cmp" , description : "Checks for (in-)equality comparisons on floating-point\\nvalues (apart from zero), except in functions called `*eq*` (which probably\\nimplement equality for a type involving floats)." } , LintCompletion { label : "clippy::float_cmp_const" , description : "Checks for (in-)equality comparisons on floating-point\\nvalue and constant, except in functions called `*eq*` (which probably\\nimplement equality for a type involving floats)." } , LintCompletion { label : "clippy::float_equality_without_abs" , description : "Checks for statements of the form `(a - b) < f32::EPSILON` or\\n`(a - b) < f64::EPSILON`. Notes the missing `.abs()`." } , LintCompletion { label : "clippy::fn_address_comparisons" , description : "Checks for comparisons with an address of a function item." } , LintCompletion { label : "clippy::fn_params_excessive_bools" , description : "Checks for excessive use of\\nbools in function definitions." } , LintCompletion { label : "clippy::fn_to_numeric_cast" , description : "Checks for casts of function pointers to something other than usize" } , LintCompletion { label : "clippy::fn_to_numeric_cast_with_truncation" , description : "Checks for casts of a function pointer to a numeric type not wide enough to\\nstore address." } , LintCompletion { label : "clippy::for_kv_map" , description : "Checks for iterating a map (`HashMap` or `BTreeMap`) and\\nignoring either the keys or values." } , LintCompletion { label : "clippy::for_loops_over_fallibles" , description : "Checks for `for` loops over `Option` or `Result` values." } , LintCompletion { label : "clippy::forget_copy" , description : "Checks for calls to `std::mem::forget` with a value that\\nderives the Copy trait" } , LintCompletion { label : "clippy::forget_ref" , description : "Checks for calls to `std::mem::forget` with a reference\\ninstead of an owned value." } , LintCompletion { label : "clippy::future_not_send" , description : "This lint requires Future implementations returned from\\nfunctions and methods to implement the `Send` marker trait. It is mostly\\nused by library authors (public and internal) that target an audience where\\nmultithreaded executors are likely to be used for running these Futures." } , LintCompletion { label : "clippy::get_last_with_len" , description : "Checks for using `x.get(x.len() - 1)` instead of\\n`x.last()`." } , LintCompletion { label : "clippy::get_unwrap" , description : "Checks for use of `.get().unwrap()` (or\\n`.get_mut().unwrap`) on a standard library type which implements `Index`" } , LintCompletion { label : "clippy::identity_op" , description : "Checks for identity operations, e.g., `x + 0`." } , LintCompletion { label : "clippy::if_let_mutex" , description : "Checks for `Mutex::lock` calls in `if let` expression\\nwith lock calls in any of the else blocks." } , LintCompletion { label : "clippy::if_let_redundant_pattern_matching" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::if_let_some_result" , description : "* Checks for unnecessary `ok()` in if let." } , LintCompletion { label : "clippy::if_not_else" , description : "Checks for usage of `!` or `!=` in an if condition with an\\nelse branch." } , LintCompletion { label : "clippy::if_same_then_else" , description : "Checks for `if/else` with the same body as the *then* part\\nand the *else* part." } , LintCompletion { label : "clippy::ifs_same_cond" , description : "Checks for consecutive `if`s with the same condition." } , LintCompletion { label : "clippy::implicit_hasher" , description : "Checks for public `impl` or `fn` missing generalization\\nover different hashers and implicitly defaulting to the default hashing\\nalgorithm (`SipHash`)." } , LintCompletion { label : "clippy::implicit_return" , description : "Checks for missing return statements at the end of a block." } , LintCompletion { label : "clippy::implicit_saturating_sub" , description : "Checks for implicit saturating subtraction." } , LintCompletion { label : "clippy::imprecise_flops" , description : "Looks for floating-point expressions that\\ncan be expressed using built-in methods to improve accuracy\\nat the cost of performance." } , LintCompletion { label : "clippy::inconsistent_digit_grouping" , description : "Warns if an integral or floating-point constant is\\ngrouped inconsistently with underscores." } , LintCompletion { label : "clippy::indexing_slicing" , description : "Checks for usage of indexing or slicing. Arrays are special cases, this lint\\ndoes report on arrays if we can tell that slicing operations are in bounds and does not\\nlint on constant `usize` indexing on arrays because that is handled by rustc's `const_err` lint." } , LintCompletion { label : "clippy::ineffective_bit_mask" , description : "Checks for bit masks in comparisons which can be removed\\nwithout changing the outcome. The basic structure can be seen in the\\nfollowing table:\\n\\n|Comparison| Bit Op |Example |equals |\\n|----------|---------|-----------|-------|\\n|`>` / `<=`|`|` / `^`|`x | 2 > 3`|`x > 3`|\\n|`<` / `>=`|`|` / `^`|`x ^ 1 < 4`|`x < 4`|" } , LintCompletion { label : "clippy::inefficient_to_string" , description : "Checks for usage of `.to_string()` on an `&&T` where\\n`T` implements `ToString` directly (like `&&str` or `&&String`)." } , LintCompletion { label : "clippy::infallible_destructuring_match" , description : "Checks for matches being used to destructure a single-variant enum\\nor tuple struct where a `let` will suffice." } , LintCompletion { label : "clippy::infinite_iter" , description : "Checks for iteration that is guaranteed to be infinite." } , LintCompletion { label : "clippy::inherent_to_string" , description : "Checks for the definition of inherent methods with a signature of `to_string(&self) -> String`." } , LintCompletion { label : "clippy::inherent_to_string_shadow_display" , description : "Checks for the definition of inherent methods with a signature of `to_string(&self) -> String` and if the type implementing this method also implements the `Display` trait." } , LintCompletion { label : "clippy::inline_always" , description : "Checks for items annotated with `#[inline(always)]`,\\nunless the annotated function is empty or simply panics." } , LintCompletion { label : "clippy::inline_asm_x86_att_syntax" , description : "Checks for usage of AT&T x86 assembly syntax." } , LintCompletion { label : "clippy::inline_asm_x86_intel_syntax" , description : "Checks for usage of Intel x86 assembly syntax." } , LintCompletion { label : "clippy::inline_fn_without_body" , description : "Checks for `#[inline]` on trait methods without bodies" } , LintCompletion { label : "clippy::int_plus_one" , description : "Checks for usage of `x >= y + 1` or `x - 1 >= y` (and `<=`) in a block" } , LintCompletion { label : "clippy::integer_arithmetic" , description : "Checks for integer arithmetic operations which could overflow or panic.\\n\\nSpecifically, checks for any operators (`+`, `-`, `*`, `<<`, etc) which are capable\\nof overflowing according to the [Rust\\nReference](https://doc.rust-lang.org/reference/expressions/operator-expr.html#overflow),\\nor which can panic (`/`, `%`). No bounds analysis or sophisticated reasoning is\\nattempted." } , LintCompletion { label : "clippy::integer_division" , description : "Checks for division of integers" } , LintCompletion { label : "clippy::into_iter_on_array" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::into_iter_on_ref" , description : "Checks for `into_iter` calls on references which should be replaced by `iter`\\nor `iter_mut`." } , LintCompletion { label : "clippy::invalid_atomic_ordering" , description : "Checks for usage of invalid atomic\\nordering in atomic loads/stores/exchanges/updates and\\nmemory fences." } , LintCompletion { label : "clippy::invalid_ref" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::invalid_regex" , description : "Checks [regex](https://crates.io/crates/regex) creation\\n(with `Regex::new`,`RegexBuilder::new` or `RegexSet::new`) for correct\\nregex syntax." } , LintCompletion { label : "clippy::invalid_upcast_comparisons" , description : "Checks for comparisons where the relation is always either\\ntrue or false, but where one side has been upcast so that the comparison is\\nnecessary. Only integer types are checked." } , LintCompletion { label : "clippy::invisible_characters" , description : "Checks for invisible Unicode characters in the code." } , LintCompletion { label : "clippy::items_after_statements" , description : "Checks for items declared after some statement in a block." } , LintCompletion { label : "clippy::iter_cloned_collect" , description : "Checks for the use of `.cloned().collect()` on slice to\\ncreate a `Vec`." } , LintCompletion { label : "clippy::iter_next_loop" , description : "Checks for loops on `x.next()`." } , LintCompletion { label : "clippy::iter_next_slice" , description : "Checks for usage of `iter().next()` on a Slice or an Array" } , LintCompletion { label : "clippy::iter_nth" , description : "Checks for use of `.iter().nth()` (and the related\\n`.iter_mut().nth()`) on standard library types with O(1) element access." } , LintCompletion { label : "clippy::iter_nth_zero" , description : "Checks for the use of `iter.nth(0)`." } , LintCompletion { label : "clippy::iter_skip_next" , description : "Checks for use of `.skip(x).next()` on iterators." } , LintCompletion { label : "clippy::iterator_step_by_zero" , description : "Checks for calling `.step_by(0)` on iterators which panics." } , LintCompletion { label : "clippy::just_underscores_and_digits" , description : "Checks if you have variables whose name consists of just\\nunderscores and digits." } , LintCompletion { label : "clippy::large_const_arrays" , description : "Checks for large `const` arrays that should\\nbe defined as `static` instead." } , LintCompletion { label : "clippy::large_digit_groups" , description : "Warns if the digits of an integral or floating-point\\nconstant are grouped into groups that\\nare too large." } , LintCompletion { label : "clippy::large_enum_variant" , description : "Checks for large size differences between variants on\\n`enum`s." } , LintCompletion { label : "clippy::large_stack_arrays" , description : "Checks for local arrays that may be too large." } , LintCompletion { label : "clippy::large_types_passed_by_value" , description : "Checks for functions taking arguments by value, where\\nthe argument type is `Copy` and large enough to be worth considering\\npassing by reference. Does not trigger if the function is being exported,\\nbecause that might induce API breakage, if the parameter is declared as mutable,\\nor if the argument is a `self`." } , LintCompletion { label : "clippy::len_without_is_empty" , description : "Checks for items that implement `.len()` but not\\n`.is_empty()`." } , LintCompletion { label : "clippy::len_zero" , description : "Checks for getting the length of something via `.len()`\\njust to compare to zero, and suggests using `.is_empty()` where applicable." } , LintCompletion { label : "clippy::let_and_return" , description : "Checks for `let`-bindings, which are subsequently\\nreturned." } , LintCompletion { label : "clippy::let_underscore_lock" , description : "Checks for `let _ = sync_lock`" } , LintCompletion { label : "clippy::let_underscore_must_use" , description : "Checks for `let _ = <expr>`\\nwhere expr is #[must_use]" } , LintCompletion { label : "clippy::let_unit_value" , description : "Checks for binding a unit value." } , LintCompletion { label : "clippy::linkedlist" , description : "Checks for usage of any `LinkedList`, suggesting to use a\\n`Vec` or a `VecDeque` (formerly called `RingBuf`)." } , LintCompletion { label : "clippy::logic_bug" , description : "Checks for boolean expressions that contain terminals that\\ncan be eliminated." } , LintCompletion { label : "clippy::lossy_float_literal" , description : "Checks for whole number float literals that\\ncannot be represented as the underlying type without loss." } , LintCompletion { label : "clippy::macro_use_imports" , description : "Checks for `#[macro_use] use...`." } , LintCompletion { label : "clippy::main_recursion" , description : "Checks for recursion using the entrypoint." } , LintCompletion { label : "clippy::manual_async_fn" , description : "It checks for manual implementations of `async` functions." } , LintCompletion { label : "clippy::manual_memcpy" , description : "Checks for for-loops that manually copy items between\\nslices that could be optimized by having a memcpy." } , LintCompletion { label : "clippy::manual_non_exhaustive" , description : "Checks for manual implementations of the non-exhaustive pattern." } , LintCompletion { label : "clippy::manual_saturating_arithmetic" , description : "Checks for `.checked_add/sub(x).unwrap_or(MAX/MIN)`." } , LintCompletion { label : "clippy::manual_strip" , description : "Suggests using `strip_{prefix,suffix}` over `str::{starts,ends}_with` and slicing using\\nthe pattern's length." } , LintCompletion { label : "clippy::manual_swap" , description : "Checks for manual swapping." } , LintCompletion { label : "clippy::manual_unwrap_or" , description : "Finds patterns that reimplement `Option::unwrap_or` or `Result::unwrap_or`." } , LintCompletion { label : "clippy::many_single_char_names" , description : "Checks for too many variables whose name consists of a\\nsingle character." } , LintCompletion { label : "clippy::map_clone" , description : "Checks for usage of `iterator.map(|x| x.clone())` and suggests\\n`iterator.cloned()` instead" } , LintCompletion { label : "clippy::map_entry" , description : "Checks for uses of `contains_key` + `insert` on `HashMap`\\nor `BTreeMap`." } , LintCompletion { label : "clippy::map_err_ignore" , description : "Checks for instances of `map_err(|_| Some::Enum)`" } , LintCompletion { label : "clippy::map_flatten" , description : "Checks for usage of `_.map(_).flatten(_)`," } , LintCompletion { label : "clippy::map_identity" , description : "Checks for instances of `map(f)` where `f` is the identity function." } , LintCompletion { label : "clippy::map_unwrap_or" , description : "Checks for usage of `option.map(_).unwrap_or(_)` or `option.map(_).unwrap_or_else(_)` or\\n`result.map(_).unwrap_or_else(_)`." } , LintCompletion { label : "clippy::match_as_ref" , description : "Checks for match which is used to add a reference to an\\n`Option` value." } , LintCompletion { label : "clippy::match_bool" , description : "Checks for matches where match expression is a `bool`. It\\nsuggests to replace the expression with an `if...else` block." } , LintCompletion { label : "clippy::match_like_matches_macro" , description : "Checks for `match` or `if let` expressions producing a\\n`bool` that could be written using `matches!`" } , LintCompletion { label : "clippy::match_on_vec_items" , description : "Checks for `match vec[idx]` or `match vec[n..m]`." } , LintCompletion { label : "clippy::match_overlapping_arm" , description : "Checks for overlapping match arms." } , LintCompletion { label : "clippy::match_ref_pats" , description : "Checks for matches where all arms match a reference,\\nsuggesting to remove the reference and deref the matched expression\\ninstead. It also checks for `if let &foo = bar` blocks." } , LintCompletion { label : "clippy::match_same_arms" , description : "Checks for `match` with identical arm bodies." } , LintCompletion { label : "clippy::match_single_binding" , description : "Checks for useless match that binds to only one value." } , LintCompletion { label : "clippy::match_wild_err_arm" , description : "Checks for arm which matches all errors with `Err(_)`\\nand take drastic actions like `panic!`." } , LintCompletion { label : "clippy::match_wildcard_for_single_variants" , description : "Checks for wildcard enum matches for a single variant." } , LintCompletion { label : "clippy::maybe_infinite_iter" , description : "Checks for iteration that may be infinite." } , LintCompletion { label : "clippy::mem_discriminant_non_enum" , description : "Checks for calls of `mem::discriminant()` on a non-enum type." } , LintCompletion { label : "clippy::mem_forget" , description : "Checks for usage of `std::mem::forget(t)` where `t` is\\n`Drop`." } , LintCompletion { label : "clippy::mem_replace_option_with_none" , description : "Checks for `mem::replace()` on an `Option` with\\n`None`." } , LintCompletion { label : "clippy::mem_replace_with_default" , description : "Checks for `std::mem::replace` on a value of type\\n`T` with `T::default()`." } , LintCompletion { label : "clippy::mem_replace_with_uninit" , description : "Checks for `mem::replace(&mut _, mem::uninitialized())`\\nand `mem::replace(&mut _, mem::zeroed())`." } , LintCompletion { label : "clippy::min_max" , description : "Checks for expressions where `std::cmp::min` and `max` are\\nused to clamp values, but switched so that the result is constant." } , LintCompletion { label : "clippy::misaligned_transmute" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::mismatched_target_os" , description : "Checks for cfg attributes having operating systems used in target family position." } , LintCompletion { label : "clippy::misrefactored_assign_op" , description : "Checks for `a op= a op b` or `a op= b op a` patterns." } , LintCompletion { label : "clippy::missing_const_for_fn" , description : "Suggests the use of `const` in functions and methods where possible." } , LintCompletion { label : "clippy::missing_docs_in_private_items" , description : "Warns if there is missing doc for any documentable item\\n(public or private)." } , LintCompletion { label : "clippy::missing_errors_doc" , description : "Checks the doc comments of publicly visible functions that\\nreturn a `Result` type and warns if there is no `# Errors` section." } , LintCompletion { label : "clippy::missing_inline_in_public_items" , description : "it lints if an exported function, method, trait method with default impl,\\nor trait method impl is not `#[inline]`." } , LintCompletion { label : "clippy::missing_safety_doc" , description : "Checks for the doc comments of publicly visible\\nunsafe functions and warns if there is no `# Safety` section." } , LintCompletion { label : "clippy::mistyped_literal_suffixes" , description : "Warns for mistyped suffix in literals" } , LintCompletion { label : "clippy::mixed_case_hex_literals" , description : "Warns on hexadecimal literals with mixed-case letter\\ndigits." } , LintCompletion { label : "clippy::module_inception" , description : "Checks for modules that have the same name as their\\nparent module" } , LintCompletion { label : "clippy::module_name_repetitions" , description : "Detects type names that are prefixed or suffixed by the\\ncontaining module's name." } , LintCompletion { label : "clippy::modulo_arithmetic" , description : "Checks for modulo arithmetic." } , LintCompletion { label : "clippy::modulo_one" , description : "Checks for getting the remainder of a division by one." } , LintCompletion { label : "clippy::multiple_crate_versions" , description : "Checks to see if multiple versions of a crate are being\\nused." } , LintCompletion { label : "clippy::multiple_inherent_impl" , description : "Checks for multiple inherent implementations of a struct" } , LintCompletion { label : "clippy::must_use_candidate" , description : "Checks for public functions that have no\\n[`#[must_use]`] attribute, but return something not already marked\\nmust-use, have no mutable arg and mutate no statics.\\n\\n[`#[must_use]`]: https://doc.rust-lang.org/reference/attributes/diagnostics.html#the-must_use-attribute" } , LintCompletion { label : "clippy::must_use_unit" , description : "Checks for a [`#[must_use]`] attribute on\\nunit-returning functions and methods.\\n\\n[`#[must_use]`]: https://doc.rust-lang.org/reference/attributes/diagnostics.html#the-must_use-attribute" } , LintCompletion { label : "clippy::mut_from_ref" , description : "This lint checks for functions that take immutable\\nreferences and return mutable ones." } , LintCompletion { label : "clippy::mut_mut" , description : "Checks for instances of `mut mut` references." } , LintCompletion { label : "clippy::mut_range_bound" , description : "Checks for loops which have a range bound that is a mutable variable" } , LintCompletion { label : "clippy::mutable_key_type" , description : "Checks for sets/maps with mutable key types." } , LintCompletion { label : "clippy::mutex_atomic" , description : "Checks for usages of `Mutex<X>` where an atomic will do." } , LintCompletion { label : "clippy::mutex_integer" , description : "Checks for usages of `Mutex<X>` where `X` is an integral\\ntype." } , LintCompletion { label : "clippy::naive_bytecount" , description : "Checks for naive byte counts" } , LintCompletion { label : "clippy::needless_arbitrary_self_type" , description : "The lint checks for `self` in fn parameters that\\nspecify the `Self`-type explicitly" } , LintCompletion { label : "clippy::needless_bool" , description : "Checks for expressions of the form `if c { true } else {\\nfalse }` (or vice versa) and suggests using the condition directly." } , LintCompletion { label : "clippy::needless_borrow" , description : "Checks for address of operations (`&`) that are going to\\nbe dereferenced immediately by the compiler." } , LintCompletion { label : "clippy::needless_borrowed_reference" , description : "Checks for useless borrowed references." } , LintCompletion { label : "clippy::needless_collect" , description : "Checks for functions collecting an iterator when collect\\nis not needed." } , LintCompletion { label : "clippy::needless_continue" , description : "The lint checks for `if`-statements appearing in loops\\nthat contain a `continue` statement in either their main blocks or their\\n`else`-blocks, when omitting the `else`-block possibly with some\\nrearrangement of code can make the code easier to understand." } , LintCompletion { label : "clippy::needless_doctest_main" , description : "Checks for `fn main() { .. }` in doctests" } , LintCompletion { label : "clippy::needless_lifetimes" , description : "Checks for lifetime annotations which can be removed by\\nrelying on lifetime elision." } , LintCompletion { label : "clippy::needless_pass_by_value" , description : "Checks for functions taking arguments by value, but not\\nconsuming them in its\\nbody." } , LintCompletion { label : "clippy::needless_range_loop" , description : "Checks for looping over the range of `0..len` of some\\ncollection just to get the values by index." } , LintCompletion { label : "clippy::needless_return" , description : "Checks for return statements at the end of a block." } , LintCompletion { label : "clippy::needless_update" , description : "Checks for needlessly including a base struct on update\\nwhen all fields are changed anyway." } , LintCompletion { label : "clippy::neg_cmp_op_on_partial_ord" , description : "Checks for the usage of negated comparison operators on types which only implement\\n`PartialOrd` (e.g., `f64`)." } , LintCompletion { label : "clippy::neg_multiply" , description : "Checks for multiplication by -1 as a form of negation." } , LintCompletion { label : "clippy::never_loop" , description : "Checks for loops that will always `break`, `return` or\\n`continue` an outer loop." } , LintCompletion { label : "clippy::new_ret_no_self" , description : "Checks for `new` not returning a type that contains `Self`." } , LintCompletion { label : "clippy::new_without_default" , description : "Checks for types with a `fn new() -> Self` method and no\\nimplementation of\\n[`Default`](https://doc.rust-lang.org/std/default/trait.Default.html)." } , LintCompletion { label : "clippy::no_effect" , description : "Checks for statements which have no effect." } , LintCompletion { label : "clippy::non_ascii_literal" , description : "Checks for non-ASCII characters in string literals." } , LintCompletion { label : "clippy::nonminimal_bool" , description : "Checks for boolean expressions that can be written more\\nconcisely." } , LintCompletion { label : "clippy::nonsensical_open_options" , description : "Checks for duplicate open options as well as combinations\\nthat make no sense." } , LintCompletion { label : "clippy::not_unsafe_ptr_arg_deref" , description : "Checks for public functions that dereference raw pointer\\narguments but are not marked unsafe." } , LintCompletion { label : "clippy::ok_expect" , description : "Checks for usage of `ok().expect(..)`." } , LintCompletion { label : "clippy::op_ref" , description : "Checks for arguments to `==` which have their address\\ntaken to satisfy a bound\\nand suggests to dereference the other argument instead" } , LintCompletion { label : "clippy::option_as_ref_deref" , description : "Checks for usage of `_.as_ref().map(Deref::deref)` or it's aliases (such as String::as_str)." } , LintCompletion { label : "clippy::option_env_unwrap" , description : "Checks for usage of `option_env!(...).unwrap()` and\\nsuggests usage of the `env!` macro." } , LintCompletion { label : "clippy::option_if_let_else" , description : "Lints usage of `if let Some(v) = ... { y } else { x }` which is more\\nidiomatically done with `Option::map_or` (if the else bit is a pure\\nexpression) or `Option::map_or_else` (if the else bit is an impure\\nexpression)." } , LintCompletion { label : "clippy::option_map_or_none" , description : "Checks for usage of `_.map_or(None, _)`." } , LintCompletion { label : "clippy::option_map_unit_fn" , description : "Checks for usage of `option.map(f)` where f is a function\\nor closure that returns the unit type `()`." } , LintCompletion { label : "clippy::option_option" , description : "Checks for use of `Option<Option<_>>` in function signatures and type\\ndefinitions" } , LintCompletion { label : "clippy::or_fun_call" , description : "Checks for calls to `.or(foo(..))`, `.unwrap_or(foo(..))`,\\netc., and suggests to use `or_else`, `unwrap_or_else`, etc., or\\n`unwrap_or_default` instead." } , LintCompletion { label : "clippy::out_of_bounds_indexing" , description : "Checks for out of bounds array indexing with a constant\\nindex." } , LintCompletion { label : "clippy::overflow_check_conditional" , description : "Detects classic underflow/overflow checks." } , LintCompletion { label : "clippy::panic" , description : "Checks for usage of `panic!`." } , LintCompletion { label : "clippy::panic_in_result_fn" , description : "Checks for usage of `panic!`, `unimplemented!`, `todo!` or `unreachable!` in a function of type result." } , LintCompletion { label : "clippy::panic_params" , description : "Checks for missing parameters in `panic!`." } , LintCompletion { label : "clippy::panicking_unwrap" , description : "Checks for calls of `unwrap[_err]()` that will always fail." } , LintCompletion { label : "clippy::partialeq_ne_impl" , description : "Checks for manual re-implementations of `PartialEq::ne`." } , LintCompletion { label : "clippy::path_buf_push_overwrite" , description : "* Checks for [push](https://doc.rust-lang.org/std/path/struct.PathBuf.html#method.push)\\ncalls on `PathBuf` that can cause overwrites." } , LintCompletion { label : "clippy::pattern_type_mismatch" , description : "Checks for patterns that aren't exact representations of the types\\nthey are applied to.\\n\\nTo satisfy this lint, you will have to adjust either the expression that is matched\\nagainst or the pattern itself, as well as the bindings that are introduced by the\\nadjusted patterns. For matching you will have to either dereference the expression\\nwith the `*` operator, or amend the patterns to explicitly match against `&<pattern>`\\nor `&mut <pattern>` depending on the reference mutability. For the bindings you need\\nto use the inverse. You can leave them as plain bindings if you wish for the value\\nto be copied, but you must use `ref mut <variable>` or `ref <variable>` to construct\\na reference into the matched structure.\\n\\nIf you are looking for a way to learn about ownership semantics in more detail, it\\nis recommended to look at IDE options available to you to highlight types, lifetimes\\nand reference semantics in your code. The available tooling would expose these things\\nin a general way even outside of the various pattern matching mechanics. Of course\\nthis lint can still be used to highlight areas of interest and ensure a good understanding\\nof ownership semantics." } , LintCompletion { label : "clippy::possible_missing_comma" , description : "Checks for possible missing comma in an array. It lints if\\nan array element is a binary operator expression and it lies on two lines." } , LintCompletion { label : "clippy::precedence" , description : "Checks for operations where precedence may be unclear\\nand suggests to add parentheses. Currently it catches the following:\\n* mixed usage of arithmetic and bit shifting/combining operators without\\nparentheses\\n* a \\\"negative\\\" numeric literal (which is really a unary `-` followed by a\\nnumeric literal)\\n followed by a method call" } , LintCompletion { label : "clippy::print_literal" , description : "This lint warns about the use of literals as `print!`/`println!` args." } , LintCompletion { label : "clippy::print_stdout" , description : "Checks for printing on *stdout*. The purpose of this lint\\nis to catch debugging remnants." } , LintCompletion { label : "clippy::print_with_newline" , description : "This lint warns when you use `print!()` with a format\\nstring that ends in a newline." } , LintCompletion { label : "clippy::println_empty_string" , description : "This lint warns when you use `println!(\\\"\\\")` to\\nprint a newline." } , LintCompletion { label : "clippy::ptr_arg" , description : "This lint checks for function arguments of type `&String`\\nor `&Vec` unless the references are mutable. It will also suggest you\\nreplace `.clone()` calls with the appropriate `.to_owned()`/`to_string()`\\ncalls." } , LintCompletion { label : "clippy::ptr_eq" , description : "Use `std::ptr::eq` when applicable" } , LintCompletion { label : "clippy::ptr_offset_with_cast" , description : "Checks for usage of the `offset` pointer method with a `usize` casted to an\\n`isize`." } , LintCompletion { label : "clippy::pub_enum_variant_names" , description : "Detects public enumeration variants that are\\nprefixed or suffixed by the same characters." } , LintCompletion { label : "clippy::question_mark" , description : "Checks for expressions that could be replaced by the question mark operator." } , LintCompletion { label : "clippy::range_minus_one" , description : "Checks for inclusive ranges where 1 is subtracted from\\nthe upper bound, e.g., `x..=(y-1)`." } , LintCompletion { label : "clippy::range_plus_one" , description : "Checks for exclusive ranges where 1 is added to the\\nupper bound, e.g., `x..(y+1)`." } , LintCompletion { label : "clippy::range_step_by_zero" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::range_zip_with_len" , description : "Checks for zipping a collection with the range of\\n`0.._.len()`." } , LintCompletion { label : "clippy::rc_buffer" , description : "Checks for `Rc<T>` and `Arc<T>` when `T` is a mutable buffer type such as `String` or `Vec`." } , LintCompletion { label : "clippy::redundant_allocation" , description : "Checks for use of redundant allocations anywhere in the code." } , LintCompletion { label : "clippy::redundant_clone" , description : "Checks for a redundant `clone()` (and its relatives) which clones an owned\\nvalue that is going to be dropped without further use." } , LintCompletion { label : "clippy::redundant_closure" , description : "Checks for closures which just call another function where\\nthe function can be called directly. `unsafe` functions or calls where types\\nget adjusted are ignored." } , LintCompletion { label : "clippy::redundant_closure_call" , description : "Detects closures called in the same expression where they\\nare defined." } , LintCompletion { label : "clippy::redundant_closure_for_method_calls" , description : "Checks for closures which only invoke a method on the closure\\nargument and can be replaced by referencing the method directly." } , LintCompletion { label : "clippy::redundant_field_names" , description : "Checks for fields in struct literals where shorthands\\ncould be used." } , LintCompletion { label : "clippy::redundant_pattern" , description : "Checks for patterns in the form `name @ _`." } , LintCompletion { label : "clippy::redundant_pattern_matching" , description : "Lint for redundant pattern matching over `Result` or\\n`Option`" } , LintCompletion { label : "clippy::redundant_pub_crate" , description : "Checks for items declared `pub(crate)` that are not crate visible because they\\nare inside a private module." } , LintCompletion { label : "clippy::redundant_static_lifetimes" , description : "Checks for constants and statics with an explicit `'static` lifetime." } , LintCompletion { label : "clippy::ref_in_deref" , description : "Checks for references in expressions that use\\nauto dereference." } , LintCompletion { label : "clippy::regex_macro" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::repeat_once" , description : "Checks for usage of `.repeat(1)` and suggest the following method for each types.\\n- `.to_string()` for `str`\\n- `.clone()` for `String`\\n- `.to_vec()` for `slice`" } , LintCompletion { label : "clippy::replace_consts" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::rest_pat_in_fully_bound_structs" , description : "Checks for unnecessary '..' pattern binding on struct when all fields are explicitly matched." } , LintCompletion { label : "clippy::result_map_or_into_option" , description : "Checks for usage of `_.map_or(None, Some)`." } , LintCompletion { label : "clippy::result_map_unit_fn" , description : "Checks for usage of `result.map(f)` where f is a function\\nor closure that returns the unit type `()`." } , LintCompletion { label : "clippy::result_unit_err" , description : "Checks for public functions that return a `Result`\\nwith an `Err` type of `()`. It suggests using a custom type that\\nimplements [`std::error::Error`]." } , LintCompletion { label : "clippy::reversed_empty_ranges" , description : "Checks for range expressions `x..y` where both `x` and `y`\\nare constant and `x` is greater or equal to `y`." } , LintCompletion { label : "clippy::same_functions_in_if_condition" , description : "Checks for consecutive `if`s with the same function call." } , LintCompletion { label : "clippy::same_item_push" , description : "Checks whether a for loop is being used to push a constant\\nvalue into a Vec." } , LintCompletion { label : "clippy::search_is_some" , description : "Checks for an iterator search (such as `find()`,\\n`position()`, or `rposition()`) followed by a call to `is_some()`." } , LintCompletion { label : "clippy::self_assignment" , description : "Checks for explicit self-assignments." } , LintCompletion { label : "clippy::serde_api_misuse" , description : "Checks for mis-uses of the serde API." } , LintCompletion { label : "clippy::shadow_reuse" , description : "Checks for bindings that shadow other bindings already in\\nscope, while reusing the original value." } , LintCompletion { label : "clippy::shadow_same" , description : "Checks for bindings that shadow other bindings already in\\nscope, while just changing reference level or mutability." } , LintCompletion { label : "clippy::shadow_unrelated" , description : "Checks for bindings that shadow other bindings already in\\nscope, either without a initialization or with one that does not even use\\nthe original value." } , LintCompletion { label : "clippy::short_circuit_statement" , description : "Checks for the use of short circuit boolean conditions as\\na\\nstatement." } , LintCompletion { label : "clippy::should_assert_eq" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::should_implement_trait" , description : "Checks for methods that should live in a trait\\nimplementation of a `std` trait (see [llogiq's blog\\npost](http://llogiq.github.io/2015/07/30/traits.html) for further\\ninformation) instead of an inherent implementation." } , LintCompletion { label : "clippy::similar_names" , description : "Checks for names that are very similar and thus confusing." } , LintCompletion { label : "clippy::single_char_pattern" , description : "Checks for string methods that receive a single-character\\n`str` as an argument, e.g., `_.split(\\\"x\\\")`." } , LintCompletion { label : "clippy::single_char_push_str" , description : "Warns when using `push_str` with a single-character string literal,\\nand `push` with a `char` would work fine." } , LintCompletion { label : "clippy::single_component_path_imports" , description : "Checking for imports with single component use path." } , LintCompletion { label : "clippy::single_match" , description : "Checks for matches with a single arm where an `if let`\\nwill usually suffice." } , LintCompletion { label : "clippy::single_match_else" , description : "Checks for matches with two arms where an `if let else` will\\nusually suffice." } , LintCompletion { label : "clippy::skip_while_next" , description : "Checks for usage of `_.skip_while(condition).next()`." } , LintCompletion { label : "clippy::slow_vector_initialization" , description : "Checks slow zero-filled vector initialization" } , LintCompletion { label : "clippy::stable_sort_primitive" , description : "When sorting primitive values (integers, bools, chars, as well\\nas arrays, slices, and tuples of such items), it is better to\\nuse an unstable sort than a stable sort." } , LintCompletion { label : "clippy::str_to_string" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::string_add" , description : "Checks for all instances of `x + _` where `x` is of type\\n`String`, but only if [`string_add_assign`](#string_add_assign) does *not*\\nmatch." } , LintCompletion { label : "clippy::string_add_assign" , description : "Checks for string appends of the form `x = x + y` (without\\n`let`!)." } , LintCompletion { label : "clippy::string_extend_chars" , description : "Checks for the use of `.extend(s.chars())` where s is a\\n`&str` or `String`." } , LintCompletion { label : "clippy::string_lit_as_bytes" , description : "Checks for the `as_bytes` method called on string literals\\nthat contain only ASCII characters." } , LintCompletion { label : "clippy::string_to_string" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::struct_excessive_bools" , description : "Checks for excessive\\nuse of bools in structs." } , LintCompletion { label : "clippy::suboptimal_flops" , description : "Looks for floating-point expressions that\\ncan be expressed using built-in methods to improve both\\naccuracy and performance." } , LintCompletion { label : "clippy::suspicious_arithmetic_impl" , description : "Lints for suspicious operations in impls of arithmetic operators, e.g.\\nsubtracting elements in an Add impl." } , LintCompletion { label : "clippy::suspicious_assignment_formatting" , description : "Checks for use of the non-existent `=*`, `=!` and `=-`\\noperators." } , LintCompletion { label : "clippy::suspicious_else_formatting" , description : "Checks for formatting of `else`. It lints if the `else`\\nis followed immediately by a newline or the `else` seems to be missing." } , LintCompletion { label : "clippy::suspicious_map" , description : "Checks for calls to `map` followed by a `count`." } , LintCompletion { label : "clippy::suspicious_op_assign_impl" , description : "Lints for suspicious operations in impls of OpAssign, e.g.\\nsubtracting elements in an AddAssign impl." } , LintCompletion { label : "clippy::suspicious_unary_op_formatting" , description : "Checks the formatting of a unary operator on the right hand side\\nof a binary operator. It lints if there is no space between the binary and unary operators,\\nbut there is a space between the unary and its operand." } , LintCompletion { label : "clippy::tabs_in_doc_comments" , description : "Checks doc comments for usage of tab characters." } , LintCompletion { label : "clippy::temporary_assignment" , description : "Checks for construction of a structure or tuple just to\\nassign a value in it." } , LintCompletion { label : "clippy::temporary_cstring_as_ptr" , description : "Checks for getting the inner pointer of a temporary\\n`CString`." } , LintCompletion { label : "clippy::to_digit_is_some" , description : "Checks for `.to_digit(..).is_some()` on `char`s." } , LintCompletion { label : "clippy::to_string_in_display" , description : "Checks for uses of `to_string()` in `Display` traits." } , LintCompletion { label : "clippy::todo" , description : "Checks for usage of `todo!`." } , LintCompletion { label : "clippy::too_many_arguments" , description : "Checks for functions with too many parameters." } , LintCompletion { label : "clippy::too_many_lines" , description : "Checks for functions with a large amount of lines." } , LintCompletion { label : "clippy::toplevel_ref_arg" , description : "Checks for function arguments and let bindings denoted as\\n`ref`." } , LintCompletion { label : "clippy::trait_duplication_in_bounds" , description : "Checks for cases where generics are being used and multiple\\nsyntax specifications for trait bounds are used simultaneously." } , LintCompletion { label : "clippy::transmute_bytes_to_str" , description : "Checks for transmutes from a `&[u8]` to a `&str`." } , LintCompletion { label : "clippy::transmute_float_to_int" , description : "Checks for transmutes from a float to an integer." } , LintCompletion { label : "clippy::transmute_int_to_bool" , description : "Checks for transmutes from an integer to a `bool`." } , LintCompletion { label : "clippy::transmute_int_to_char" , description : "Checks for transmutes from an integer to a `char`." } , LintCompletion { label : "clippy::transmute_int_to_float" , description : "Checks for transmutes from an integer to a float." } , LintCompletion { label : "clippy::transmute_ptr_to_ptr" , description : "Checks for transmutes from a pointer to a pointer, or\\nfrom a reference to a reference." } , LintCompletion { label : "clippy::transmute_ptr_to_ref" , description : "Checks for transmutes from a pointer to a reference." } , LintCompletion { label : "clippy::transmutes_expressible_as_ptr_casts" , description : "Checks for transmutes that could be a pointer cast." } , LintCompletion { label : "clippy::transmuting_null" , description : "Checks for transmute calls which would receive a null pointer." } , LintCompletion { label : "clippy::trivial_regex" , description : "Checks for trivial [regex](https://crates.io/crates/regex)\\ncreation (with `Regex::new`, `RegexBuilder::new` or `RegexSet::new`)." } , LintCompletion { label : "clippy::trivially_copy_pass_by_ref" , description : "Checks for functions taking arguments by reference, where\\nthe argument type is `Copy` and small enough to be more efficient to always\\npass by value." } , LintCompletion { label : "clippy::try_err" , description : "Checks for usages of `Err(x)?`." } , LintCompletion { label : "clippy::type_complexity" , description : "Checks for types used in structs, parameters and `let`\\ndeclarations above a certain complexity threshold." } , LintCompletion { label : "clippy::type_repetition_in_bounds" , description : "This lint warns about unnecessary type repetitions in trait bounds" } , LintCompletion { label : "clippy::unicode_not_nfc" , description : "Checks for string literals that contain Unicode in a form\\nthat is not equal to its\\n[NFC-recomposition](http://www.unicode.org/reports/tr15/#Norm_Forms)." } , LintCompletion { label : "clippy::unimplemented" , description : "Checks for usage of `unimplemented!`." } , LintCompletion { label : "clippy::uninit_assumed_init" , description : "Checks for `MaybeUninit::uninit().assume_init()`." } , LintCompletion { label : "clippy::unit_arg" , description : "Checks for passing a unit value as an argument to a function without using a\\nunit literal (`()`)." } , LintCompletion { label : "clippy::unit_cmp" , description : "Checks for comparisons to unit. This includes all binary\\ncomparisons (like `==` and `<`) and asserts." } , LintCompletion { label : "clippy::unit_return_expecting_ord" , description : "Checks for functions that expect closures of type\\nFn(...) -> Ord where the implemented closure returns the unit type.\\nThe lint also suggests to remove the semi-colon at the end of the statement if present." } , LintCompletion { label : "clippy::unknown_clippy_lints" , description : "Checks for `allow`/`warn`/`deny`/`forbid` attributes with scoped clippy\\nlints and if those lints exist in clippy. If there is an uppercase letter in the lint name\\n(not the tool name) and a lowercase version of this lint exists, it will suggest to lowercase\\nthe lint name." } , LintCompletion { label : "clippy::unnecessary_cast" , description : "Checks for casts to the same type, casts of int literals to integer types\\nand casts of float literals to float types." } , LintCompletion { label : "clippy::unnecessary_filter_map" , description : "Checks for `filter_map` calls which could be replaced by `filter` or `map`.\\nMore specifically it checks if the closure provided is only performing one of the\\nfilter or map operations and suggests the appropriate option." } , LintCompletion { label : "clippy::unnecessary_fold" , description : "Checks for using `fold` when a more succinct alternative exists.\\nSpecifically, this checks for `fold`s which could be replaced by `any`, `all`,\\n`sum` or `product`." } , LintCompletion { label : "clippy::unnecessary_lazy_evaluations" , description : "As the counterpart to `or_fun_call`, this lint looks for unnecessary\\nlazily evaluated closures on `Option` and `Result`.\\n\\nThis lint suggests changing the following functions, when eager evaluation results in\\nsimpler code:\\n - `unwrap_or_else` to `unwrap_or`\\n - `and_then` to `and`\\n - `or_else` to `or`\\n - `get_or_insert_with` to `get_or_insert`\\n - `ok_or_else` to `ok_or`" } , LintCompletion { label : "clippy::unnecessary_mut_passed" , description : "Detects passing a mutable reference to a function that only\\nrequires an immutable reference." } , LintCompletion { label : "clippy::unnecessary_operation" , description : "Checks for expression statements that can be reduced to a\\nsub-expression." } , LintCompletion { label : "clippy::unnecessary_sort_by" , description : "Detects uses of `Vec::sort_by` passing in a closure\\nwhich compares the two arguments, either directly or indirectly." } , LintCompletion { label : "clippy::unnecessary_unwrap" , description : "Checks for calls of `unwrap[_err]()` that cannot fail." } , LintCompletion { label : "clippy::unneeded_field_pattern" , description : "Checks for structure field patterns bound to wildcards." } , LintCompletion { label : "clippy::unneeded_wildcard_pattern" , description : "Checks for tuple patterns with a wildcard\\npattern (`_`) is next to a rest pattern (`..`).\\n\\n_NOTE_: While `_, ..` means there is at least one element left, `..`\\nmeans there are 0 or more elements left. This can make a difference\\nwhen refactoring, but shouldn't result in errors in the refactored code,\\nsince the wildcard pattern isn't used anyway." } , LintCompletion { label : "clippy::unnested_or_patterns" , description : "Checks for unnested or-patterns, e.g., `Some(0) | Some(2)` and\\nsuggests replacing the pattern with a nested one, `Some(0 | 2)`.\\n\\nAnother way to think of this is that it rewrites patterns in\\n*disjunctive normal form (DNF)* into *conjunctive normal form (CNF)*." } , LintCompletion { label : "clippy::unreachable" , description : "Checks for usage of `unreachable!`." } , LintCompletion { label : "clippy::unreadable_literal" , description : "Warns if a long integral or floating-point constant does\\nnot contain underscores." } , LintCompletion { label : "clippy::unsafe_derive_deserialize" , description : "Checks for deriving `serde::Deserialize` on a type that\\nhas methods using `unsafe`." } , LintCompletion { label : "clippy::unsafe_removed_from_name" , description : "Checks for imports that remove \\\"unsafe\\\" from an item's\\nname." } , LintCompletion { label : "clippy::unsafe_vector_initialization" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::unseparated_literal_suffix" , description : "Warns if literal suffixes are not separated by an\\nunderscore." } , LintCompletion { label : "clippy::unsound_collection_transmute" , description : "Checks for transmutes between collections whose\\ntypes have different ABI, size or alignment." } , LintCompletion { label : "clippy::unstable_as_mut_slice" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::unstable_as_slice" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::unused_collect" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::unused_io_amount" , description : "Checks for unused written/read amount." } , LintCompletion { label : "clippy::unused_label" , description : "Nothing. This lint has been deprecated." } , LintCompletion { label : "clippy::unused_self" , description : "Checks methods that contain a `self` argument but don't use it" } , LintCompletion { label : "clippy::unused_unit" , description : "Checks for unit (`()`) expressions that can be removed." } , LintCompletion { label : "clippy::unwrap_in_result" , description : "Checks for functions of type Result that contain `expect()` or `unwrap()`" } , LintCompletion { label : "clippy::unwrap_used" , description : "Checks for `.unwrap()` calls on `Option`s and on `Result`s." } , LintCompletion { label : "clippy::use_debug" , description : "Checks for use of `Debug` formatting. The purpose of this\\nlint is to catch debugging remnants." } , LintCompletion { label : "clippy::use_self" , description : "Checks for unnecessary repetition of structure name when a\\nreplacement with `Self` is applicable." } , LintCompletion { label : "clippy::used_underscore_binding" , description : "Checks for the use of bindings with a single leading\\nunderscore." } , LintCompletion { label : "clippy::useless_asref" , description : "Checks for usage of `.as_ref()` or `.as_mut()` where the\\ntypes before and after the call are the same." } , LintCompletion { label : "clippy::useless_attribute" , description : "Checks for `extern crate` and `use` items annotated with\\nlint attributes.\\n\\nThis lint permits `#[allow(unused_imports)]`, `#[allow(deprecated)]`,\\n`#[allow(unreachable_pub)]`, `#[allow(clippy::wildcard_imports)]` and\\n`#[allow(clippy::enum_glob_use)]` on `use` items and `#[allow(unused_imports)]` on\\n`extern crate` items with a `#[macro_use]` attribute." } , LintCompletion { label : "clippy::useless_conversion" , description : "Checks for `Into`, `TryInto`, `From`, `TryFrom`,`IntoIter` calls\\nthat useless converts to the same type as caller." } , LintCompletion { label : "clippy::useless_format" , description : "Checks for the use of `format!(\\\"string literal with no\\nargument\\\")` and `format!(\\\"{}\\\", foo)` where `foo` is a string." } , LintCompletion { label : "clippy::useless_let_if_seq" , description : "Checks for variable declarations immediately followed by a\\nconditional affectation." } , LintCompletion { label : "clippy::useless_transmute" , description : "Checks for transmutes to the original type of the object\\nand transmutes that could be a cast." } , LintCompletion { label : "clippy::useless_vec" , description : "Checks for usage of `&vec![..]` when using `&[..]` would\\nbe possible." } , LintCompletion { label : "clippy::vec_box" , description : "Checks for use of `Vec<Box<T>>` where T: Sized anywhere in the code.\\nCheck the [Box documentation](https://doc.rust-lang.org/std/boxed/index.html) for more information." } , LintCompletion { label : "clippy::vec_resize_to_zero" , description : "Finds occurrences of `Vec::resize(0, an_int)`" } , LintCompletion { label : "clippy::verbose_bit_mask" , description : "Checks for bit masks that can be replaced by a call\\nto `trailing_zeros`" } , LintCompletion { label : "clippy::verbose_file_reads" , description : "Checks for use of File::read_to_end and File::read_to_string." } , LintCompletion { label : "clippy::vtable_address_comparisons" , description : "Checks for comparisons with an address of a trait vtable." } , LintCompletion { label : "clippy::while_immutable_condition" , description : "Checks whether variables used within while loop condition\\ncan be (and are) mutated in the body." } , LintCompletion { label : "clippy::while_let_loop" , description : "Detects `loop + match` combinations that are easier\\nwritten as a `while let` loop." } , LintCompletion { label : "clippy::while_let_on_iterator" , description : "Checks for `while let` expressions on iterators." } , LintCompletion { label : "clippy::wildcard_dependencies" , description : "Checks for wildcard dependencies in the `Cargo.toml`." } , LintCompletion { label : "clippy::wildcard_enum_match_arm" , description : "Checks for wildcard enum matches using `_`." } , LintCompletion { label : "clippy::wildcard_imports" , description : "Checks for wildcard imports `use _::*`." } , LintCompletion { label : "clippy::wildcard_in_or_patterns" , description : "Checks for wildcard pattern used with others patterns in same match arm." } , LintCompletion { label : "clippy::write_literal" , description : "This lint warns about the use of literals as `write!`/`writeln!` args." } , LintCompletion { label : "clippy::write_with_newline" , description : "This lint warns when you use `write!()` with a format\\nstring that\\nends in a newline." } , LintCompletion { label : "clippy::writeln_empty_string" , description : "This lint warns when you use `writeln!(buf, \\\"\\\")` to\\nprint a newline." } , LintCompletion { label : "clippy::wrong_pub_self_convention" , description : "This is the same as\\n[`wrong_self_convention`](#wrong_self_convention), but for public items." } , LintCompletion { label : "clippy::wrong_self_convention" , description : "Checks for methods with certain name prefixes and which\\ndoesn't match how self is taken. The actual rules are:\\n\\n|Prefix |`self` taken |\\n|-------|----------------------|\\n|`as_` |`&self` or `&mut self`|\\n|`from_`| none |\\n|`into_`|`self` |\\n|`is_` |`&self` or none |\\n|`to_` |`&self` |" } , LintCompletion { label : "clippy::wrong_transmute" , description : "Checks for transmutes that can't ever be correct on any\\narchitecture." } , LintCompletion { label : "clippy::zero_divided_by_zero" , description : "Checks for `0.0 / 0.0`." } , LintCompletion { label : "clippy::zero_prefixed_literal" , description : "Warns if an integral constant literal starts with `0`." } , LintCompletion { label : "clippy::zero_ptr" , description : "Catch casts from `0` to some pointer type" } , LintCompletion { label : "clippy::zst_offset" , description : "Checks for `offset(_)`, `wrapping_`{`add`, `sub`}, etc. on raw pointers to\\nzero-sized types" }] ;
|
