1 files changed, 111 insertions, 0 deletions

diff --git a/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1015/project_template/pin_mux.h b/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1015/project_template/pin_mux.h
new file mode 100644
index 000000000..2dd0c4955
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1015/project_template/pin_mux.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2018-2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_07 (number 68), UART1_RXD */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Device name: LPUART1 */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< LPUART1 signal: RX */
+
+/* GPIO_AD_B0_06 (number 72), UART1_TXD */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Device name: LPUART1 */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< LPUART1 signal: TX */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_SD_B1_07 (number 12), FlexSPI_CLK/U13[6] */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< FLEXSPI signal: FLEXSPI_A_SCLK */
+
+/* GPIO_SD_B1_08 (number 11), FlexSPI_D0_A/U13[5] */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< FLEXSPI signal: FLEXSPI_A_DATA0 */
+
+/* GPIO_SD_B1_10 (number 9), FlexSPI_D1_A/U13[2] */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< FLEXSPI signal: FLEXSPI_A_DATA1 */
+
+/* GPIO_SD_B1_09 (number 10), FlexSPI_D2_A/U13[3] */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< FLEXSPI signal: FLEXSPI_A_DATA2 */
+
+/* GPIO_SD_B1_06 (number 13), FlexSPI_D3_A/U13[7] */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< FLEXSPI signal: FLEXSPI_A_DATA3 */
+
+/* GPIO_SD_B1_11 (number 8), FlexSPI_SS0/U13[1] */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< FLEXSPI signal: FLEXSPI_A_SS0_B */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/