1 files changed, 234 insertions, 0 deletions

diff --git a/lib/chibios-contrib/ext/mcux-sdk/devices/LPC54113/drivers/fsl_power.h b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC54113/drivers/fsl_power.h
new file mode 100644
index 000000000..d71302f0a
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC54113/drivers/fsl_power.h
@@ -0,0 +1,234 @@
+/*
+ * Copyright (c) 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016, NXP
+ * All rights reserved.
+ *
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef _FSL_POWER_H_
+#define _FSL_POWER_H_
+
+#include "fsl_common.h"
+
+/*! @addtogroup power */
+/*! @{ */
+
+/*! @file */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief power driver version 2.0.0. */
+#define FSL_POWER_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+#define MAKE_PD_BITS(reg, slot) (((reg) << 8) | (slot))
+#define PDRCFG0 0x0U
+#define PDRCFG1 0x1U
+
+typedef enum pd_bits
+{
+    kPDRUNCFG_PD_FRO_EN = MAKE_PD_BITS(PDRCFG0, 4U),
+    kPDRUNCFG_PD_FLASH = MAKE_PD_BITS(PDRCFG0, 5U),
+    kPDRUNCFG_PD_TEMPS = MAKE_PD_BITS(PDRCFG0, 6U),
+    kPDRUNCFG_PD_BOD_RESET = MAKE_PD_BITS(PDRCFG0, 7U),
+    kPDRUNCFG_PD_BOD_INTR = MAKE_PD_BITS(PDRCFG0, 8U),
+    kPDRUNCFG_PD_ADC0 = MAKE_PD_BITS(PDRCFG0, 10U),
+    kPDRUNCFG_PD_VDDFLASH = MAKE_PD_BITS(PDRCFG0, 11U),
+    kPDRUNCFG_LP_VDDFLASH = MAKE_PD_BITS(PDRCFG0, 12U),
+    kPDRUNCFG_PD_RAM0 = MAKE_PD_BITS(PDRCFG0, 13U),
+    kPDRUNCFG_PD_RAM1 = MAKE_PD_BITS(PDRCFG0, 14U),
+    kPDRUNCFG_PD_RAM2 = MAKE_PD_BITS(PDRCFG0, 15U),
+    kPDRUNCFG_PD_RAMX = MAKE_PD_BITS(PDRCFG0, 16U),
+    kPDRUNCFG_PD_ROM = MAKE_PD_BITS(PDRCFG0, 17U),
+    kPDRUNCFG_PD_VDDHV_ENA = MAKE_PD_BITS(PDRCFG0, 18U),
+    kPDRUNCFG_PD_VD7_ENA = MAKE_PD_BITS(PDRCFG0, 19U),
+    kPDRUNCFG_PD_WDT_OSC = MAKE_PD_BITS(PDRCFG0, 20U),
+    kPDRUNCFG_PD_USB0_PHY = MAKE_PD_BITS(PDRCFG0, 21U),
+    kPDRUNCFG_PD_SYS_PLL0 = MAKE_PD_BITS(PDRCFG0, 22U),
+    kPDRUNCFG_PD_VREFP_SW = MAKE_PD_BITS(PDRCFG0, 23U),
+    kPDRUNCFG_PD_FLASH_BG = MAKE_PD_BITS(PDRCFG0, 25U),
+
+    kPDRUNCFG_PD_ALT_FLASH_IBG = MAKE_PD_BITS(PDRCFG1, 28U),
+    kPDRUNCFG_SEL_ALT_FLASH_IBG = MAKE_PD_BITS(PDRCFG1, 29U),
+
+    /*
+    This enum member has no practical meaning,it is used to avoid MISRA issue,
+    user should not trying to use it.
+    */
+    kPDRUNCFG_ForceUnsigned = 0x80000000U
+} pd_bit_t;
+
+/* Power mode configuration API parameter */
+typedef enum _power_mode_config
+{
+    kPmu_Sleep = 0U,
+    kPmu_Deep_Sleep = 1U,
+    kPmu_Deep_PowerDown = 2U,
+} power_mode_cfg_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*!
+* @name Power Configuration
+* @{
+*/
+
+/*!
+ * @brief API to enable PDRUNCFG bit in the Syscon. Note that enabling the bit powers down the peripheral
+ *
+ * @param en    peripheral for which to enable the PDRUNCFG bit
+ * @return none
+ */
+static inline void POWER_EnablePD(pd_bit_t en)
+{
+    /* PDRUNCFGSET */
+    SYSCON->PDRUNCFGSET[((uint32_t)en >> 8UL)] = (1UL << ((uint32_t)en & 0xffU));
+}
+
+/*!
+ * @brief API to disable PDRUNCFG bit in the Syscon. Note that disabling the bit powers up the peripheral
+ *
+ * @param en    peripheral for which to disable the PDRUNCFG bit
+ * @return none
+ */
+static inline void POWER_DisablePD(pd_bit_t en)
+{
+    /* PDRUNCFGCLR */
+    SYSCON->PDRUNCFGCLR[((uint32_t)en >> 8UL)] = (1UL << ((uint32_t)en & 0xffU));
+}
+
+/*!
+ * @brief API to enable deep sleep bit in the ARM Core.
+ *
+ * @return none
+ */
+static inline void POWER_EnableDeepSleep(void)
+{
+    SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+}
+
+/*!
+ * @brief API to disable deep sleep bit in the ARM Core.
+ *
+ * @return none
+ */
+static inline void POWER_DisableDeepSleep(void)
+{
+    SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
+}
+
+/*!
+ * @brief API to power down flash controller.
+ *
+ * @return none
+ */
+static inline void POWER_PowerDownFlash(void)
+{
+    /* note, we retain flash trim to make waking back up faster */
+    SYSCON->PDRUNCFGSET[0] =
+        SYSCON_PDRUNCFG_LP_VDDFLASH_MASK | SYSCON_PDRUNCFG_PD_VDDHV_ENA_MASK | SYSCON_PDRUNCFG_PD_FLASH_BG_MASK;
+
+#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
+    /* TURN OFF clock for Flash Controller (only needed for FLASH programming, will be turned on by ROM API) */
+    CLOCK_DisableClock(kCLOCK_Flash);
+
+    /* TURN OFF clock for Flash Accelerator */
+    CLOCK_DisableClock(kCLOCK_Fmc);
+#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
+}
+
+/*!
+ * @brief API to power up flash controller.
+ *
+ * @return none
+ */
+static inline void POWER_PowerUpFlash(void)
+{
+    SYSCON->PDRUNCFGCLR[0] = SYSCON_PDRUNCFG_LP_VDDFLASH_MASK | SYSCON_PDRUNCFG_PD_VDDHV_ENA_MASK;
+
+#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
+    /* TURN ON clock for flash Accelerator */
+    CLOCK_EnableClock(kCLOCK_Fmc);
+
+    /* TURN ON clock for flash Controller */
+    CLOCK_EnableClock(kCLOCK_Flash);
+#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
+}
+
+/*!
+ * @brief Power Library API to enter different power mode.
+ *
+ * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep sleep
+ * @return none
+ */
+void POWER_EnterPowerMode(power_mode_cfg_t mode, uint64_t exclude_from_pd);
+
+/*!
+ * @brief Power Library API to enter sleep mode.
+ *
+ * @return none
+ */
+void POWER_EnterSleep(void);
+
+/*!
+ * @brief Power Library API to enter deep sleep mode.
+ *
+ * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep sleep
+ * @return none
+ */
+void POWER_EnterDeepSleep(uint64_t exclude_from_pd);
+
+/*!
+ * @brief Power Library API to enter deep power down mode.
+ *
+ * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep power down mode,
+ *                         but this is has no effect as the voltages are cut off.
+ * @return none
+ */
+void POWER_EnterDeepPowerDown(uint64_t exclude_from_pd);
+
+/*!
+ * @brief Power Library API to choose normal regulation and set the voltage for the desired operating frequency.
+ *
+ * @param freq  - The desired frequency at which the part would like to operate,
+ *                note that the voltage and flash wait states should be set before changing frequency
+ * @return none
+ */
+void POWER_SetVoltageForFreq(uint32_t freq);
+
+/*!
+ * @brief Power Library API to choose low power regulation and set the voltage for the desired operating frequency.
+ *
+ * @param freq  - The desired frequency at which the part would like to operate,
+ *                note only 12MHz and 48Mhz are supported
+ * @return none
+ */
+void POWER_SetLowPowerVoltageForFreq(uint32_t freq);
+
+/*!
+ * @brief Power Library API to return the library version.
+ *
+ * @return version number of the power library
+ */
+uint32_t POWER_GetLibVersion(void);
+
+/* @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+/*! @} */
+
+#endif /* _FSL_POWER_H_ */