aboutsummaryrefslogtreecommitdiff
path: root/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h
diff options
context:
space:
mode:
Diffstat (limited to 'lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h')
-rw-r--r--lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h626
1 files changed, 626 insertions, 0 deletions
diff --git a/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h
new file mode 100644
index 000000000..ab0996302
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S26/drivers/fsl_power.h
@@ -0,0 +1,626 @@
1/*
2 * Copyright 2017, NXP
3 * All rights reserved.
4 *
5 * SPDX-License-Identifier: BSD-3-Clause
6 */
7#ifndef _FSL_POWER_H_
8#define _FSL_POWER_H_
9
10#include "fsl_common.h"
11#include "fsl_device_registers.h"
12#include <stdint.h>
13
14/*!
15 * @addtogroup power
16 * @{
17 */
18/*******************************************************************************
19 * Definitions
20 ******************************************************************************/
21
22/*! @name Driver version */
23/*@{*/
24/*! @brief power driver version 1.0.0. */
25#define FSL_POWER_DRIVER_VERSION (MAKE_VERSION(1, 0, 0))
26/*@}*/
27
28/* Power mode configuration API parameter */
29typedef enum _power_mode_config
30{
31 kPmu_Sleep = 0U,
32 kPmu_Deep_Sleep = 1U,
33 kPmu_PowerDown = 2U,
34 kPmu_Deep_PowerDown = 3U,
35} power_mode_cfg_t;
36
37/**
38 * @brief Analog components power modes control during low power modes
39 */
40typedef enum pd_bits
41{
42 kPDRUNCFG_PD_DCDC = (1UL << 0),
43 kPDRUNCFG_PD_BIAS = (1UL << 1),
44 kPDRUNCFG_PD_BODCORE = (1UL << 2),
45 kPDRUNCFG_PD_BODVBAT = (1UL << 3),
46 kPDRUNCFG_PD_FRO1M = (1UL << 4),
47 kPDRUNCFG_PD_FRO192M = (1UL << 5),
48 kPDRUNCFG_PD_FRO32K = (1UL << 6),
49 kPDRUNCFG_PD_XTAL32K = (1UL << 7),
50 kPDRUNCFG_PD_XTAL32M = (1UL << 8),
51 kPDRUNCFG_PD_PLL0 = (1UL << 9),
52 kPDRUNCFG_PD_PLL1 = (1UL << 10),
53 kPDRUNCFG_PD_USB0_PHY = (1UL << 11),
54 kPDRUNCFG_PD_USB1_PHY = (1UL << 12),
55 kPDRUNCFG_PD_COMP = (1UL << 13),
56 kPDRUNCFG_PD_TEMPSENS = (1UL << 14),
57 kPDRUNCFG_PD_GPADC = (1UL << 15),
58 kPDRUNCFG_PD_LDOMEM = (1UL << 16),
59 kPDRUNCFG_PD_LDODEEPSLEEP = (1UL << 17),
60 kPDRUNCFG_PD_LDOUSBHS = (1UL << 18),
61 kPDRUNCFG_PD_LDOGPADC = (1UL << 19),
62 kPDRUNCFG_PD_LDOXO32M = (1UL << 20),
63 kPDRUNCFG_PD_LDOFLASHNV = (1UL << 21),
64 kPDRUNCFG_PD_RNG = (1UL << 22),
65 kPDRUNCFG_PD_PLL0_SSCG = (1UL << 23),
66 kPDRUNCFG_PD_ROM = (1UL << 24),
67 /*
68 This enum member has no practical meaning,it is used to avoid MISRA issue,
69 user should not trying to use it.
70 */
71 kPDRUNCFG_ForceUnsigned = 0x80000000U,
72} pd_bit_t;
73
74/*! @brief BOD VBAT level */
75typedef enum _power_bod_vbat_level
76{
77 kPOWER_BodVbatLevel1000mv = 0, /*!< Brown out detector VBAT level 1V */
78 kPOWER_BodVbatLevel1100mv = 1, /*!< Brown out detector VBAT level 1.1V */
79 kPOWER_BodVbatLevel1200mv = 2, /*!< Brown out detector VBAT level 1.2V */
80 kPOWER_BodVbatLevel1300mv = 3, /*!< Brown out detector VBAT level 1.3V */
81 kPOWER_BodVbatLevel1400mv = 4, /*!< Brown out detector VBAT level 1.4V */
82 kPOWER_BodVbatLevel1500mv = 5, /*!< Brown out detector VBAT level 1.5V */
83 kPOWER_BodVbatLevel1600mv = 6, /*!< Brown out detector VBAT level 1.6V */
84 kPOWER_BodVbatLevel1650mv = 7, /*!< Brown out detector VBAT level 1.65V */
85 kPOWER_BodVbatLevel1700mv = 8, /*!< Brown out detector VBAT level 1.7V */
86 kPOWER_BodVbatLevel1750mv = 9, /*!< Brown out detector VBAT level 1.75V */
87 kPOWER_BodVbatLevel1800mv = 10, /*!< Brown out detector VBAT level 1.8V */
88 kPOWER_BodVbatLevel1900mv = 11, /*!< Brown out detector VBAT level 1.9V */
89 kPOWER_BodVbatLevel2000mv = 12, /*!< Brown out detector VBAT level 2V */
90 kPOWER_BodVbatLevel2100mv = 13, /*!< Brown out detector VBAT level 2.1V */
91 kPOWER_BodVbatLevel2200mv = 14, /*!< Brown out detector VBAT level 2.2V */
92 kPOWER_BodVbatLevel2300mv = 15, /*!< Brown out detector VBAT level 2.3V */
93 kPOWER_BodVbatLevel2400mv = 16, /*!< Brown out detector VBAT level 2.4V */
94 kPOWER_BodVbatLevel2500mv = 17, /*!< Brown out detector VBAT level 2.5V */
95 kPOWER_BodVbatLevel2600mv = 18, /*!< Brown out detector VBAT level 2.6V */
96 kPOWER_BodVbatLevel2700mv = 19, /*!< Brown out detector VBAT level 2.7V */
97 kPOWER_BodVbatLevel2806mv = 20, /*!< Brown out detector VBAT level 2.806V */
98 kPOWER_BodVbatLevel2900mv = 21, /*!< Brown out detector VBAT level 2.9V */
99 kPOWER_BodVbatLevel3000mv = 22, /*!< Brown out detector VBAT level 3.0V */
100 kPOWER_BodVbatLevel3100mv = 23, /*!< Brown out detector VBAT level 3.1V */
101 kPOWER_BodVbatLevel3200mv = 24, /*!< Brown out detector VBAT level 3.2V */
102 kPOWER_BodVbatLevel3300mv = 25, /*!< Brown out detector VBAT level 3.3V */
103} power_bod_vbat_level_t;
104
105/*! @brief BOD Hysteresis control */
106typedef enum _power_bod_hyst
107{
108 kPOWER_BodHystLevel25mv = 0U, /*!< BOD Hysteresis control level 25mv */
109 kPOWER_BodHystLevel50mv = 1U, /*!< BOD Hysteresis control level 50mv */
110 kPOWER_BodHystLevel75mv = 2U, /*!< BOD Hysteresis control level 75mv */
111 kPOWER_BodHystLevel100mv = 3U, /*!< BOD Hysteresis control level 100mv */
112} power_bod_hyst_t;
113
114/*! @brief BOD core level */
115typedef enum _power_bod_core_level
116{
117 kPOWER_BodCoreLevel600mv = 0, /*!< Brown out detector core level 600mV */
118 kPOWER_BodCoreLevel650mv = 1, /*!< Brown out detector core level 650mV */
119 kPOWER_BodCoreLevel700mv = 2, /*!< Brown out detector core level 700mV */
120 kPOWER_BodCoreLevel750mv = 3, /*!< Brown out detector core level 750mV */
121 kPOWER_BodCoreLevel800mv = 4, /*!< Brown out detector core level 800mV */
122 kPOWER_BodCoreLevel850mv = 5, /*!< Brown out detector core level 850mV */
123 kPOWER_BodCoreLevel900mv = 6, /*!< Brown out detector core level 900mV */
124 kPOWER_BodCoreLevel950mv = 7, /*!< Brown out detector core level 950mV */
125} power_bod_core_level_t;
126
127/**
128 * @brief Device Reset Causes
129 */
130typedef enum _power_device_reset_cause
131{
132 kRESET_CAUSE_POR = 0UL, /*!< Power On Reset */
133 kRESET_CAUSE_PADRESET = 1UL, /*!< Hardware Pin Reset */
134 kRESET_CAUSE_BODRESET = 2UL, /*!< Brown-out Detector reset (either BODVBAT or BODCORE) */
135 kRESET_CAUSE_ARMSYSTEMRESET = 3UL, /*!< ARM System Reset */
136 kRESET_CAUSE_WDTRESET = 4UL, /*!< Watchdog Timer Reset */
137 kRESET_CAUSE_SWRRESET = 5UL, /*!< Software Reset */
138 kRESET_CAUSE_CDOGRESET = 6UL, /*!< Code Watchdog Reset */
139 /* Reset causes in DEEP-POWER-DOWN low power mode */
140 kRESET_CAUSE_DPDRESET_WAKEUPIO = 7UL, /*!< Any of the 4 wake-up pins */
141 kRESET_CAUSE_DPDRESET_RTC = 8UL, /*!< Real Time Counter (RTC) */
142 kRESET_CAUSE_DPDRESET_OSTIMER = 9UL, /*!< OS Event Timer (OSTIMER) */
143 kRESET_CAUSE_DPDRESET_WAKEUPIO_RTC = 10UL, /*!< Any of the 4 wake-up pins and RTC (it is not possible to distinguish
144 which of these 2 events occured first) */
145 kRESET_CAUSE_DPDRESET_WAKEUPIO_OSTIMER = 11UL, /*!< Any of the 4 wake-up pins and OSTIMER (it is not possible to
146 distinguish which of these 2 events occured first) */
147 kRESET_CAUSE_DPDRESET_RTC_OSTIMER = 12UL, /*!< Real Time Counter or OS Event Timer (it is not possible to
148 distinguish which of these 2 events occured first) */
149 kRESET_CAUSE_DPDRESET_WAKEUPIO_RTC_OSTIMER = 13UL, /*!< Any of the 4 wake-up pins (it is not possible to distinguish
150 which of these 3 events occured first) */
151 /* Miscallenous */
152 kRESET_CAUSE_NOT_RELEVANT =
153 14UL, /*!< No reset cause (for example, this code is used when waking up from DEEP-SLEEP low power mode) */
154 kRESET_CAUSE_NOT_DETERMINISTIC = 15UL, /*!< Unknown Reset Cause. Should be treated like "Hardware Pin Reset" from an
155 application point of view. */
156} power_device_reset_cause_t;
157
158/**
159 * @brief Device Boot Modes
160 */
161typedef enum _power_device_boot_mode
162{
163 kBOOT_MODE_POWER_UP =
164 0UL, /*!< All non Low Power Mode wake up (Power On Reset, Pin Reset, BoD Reset, ARM System Reset ... ) */
165 kBOOT_MODE_LP_DEEP_SLEEP = 1UL, /*!< Wake up from DEEP-SLEEP Low Power mode */
166 kBOOT_MODE_LP_POWER_DOWN = 2UL, /*!< Wake up from POWER-DOWN Low Power mode */
167 kBOOT_MODE_LP_DEEP_POWER_DOWN = 4UL, /*!< Wake up from DEEP-POWER-DOWN Low Power mode */
168} power_device_boot_mode_t;
169
170/**
171 * @brief SRAM instances retention control during low power modes
172 */
173#define LOWPOWER_SRAMRETCTRL_RETEN_RAMX0 \
174 (1UL << 0) /*!< Enable SRAMX_0 retention when entering in Low power modes */
175#define LOWPOWER_SRAMRETCTRL_RETEN_RAMX1 \
176 (1UL << 1) /*!< Enable SRAMX_1 retention when entering in Low power modes */
177#define LOWPOWER_SRAMRETCTRL_RETEN_RAMX2 \
178 (1UL << 2) /*!< Enable SRAMX_2 retention when entering in Low power modes */
179#define LOWPOWER_SRAMRETCTRL_RETEN_RAMX3 \
180 (1UL << 3) /*!< Enable SRAMX_3 retention when entering in Low power modes */
181#define LOWPOWER_SRAMRETCTRL_RETEN_RAM00 \
182 (1UL << 4) /*!< Enable SRAM0_0 retention when entering in Low power modes */
183#define LOWPOWER_SRAMRETCTRL_RETEN_RAM01 \
184 (1UL << 5) /*!< Enable SRAM0_1 retention when entering in Low power modes */
185#define LOWPOWER_SRAMRETCTRL_RETEN_RAM10 \
186 (1UL << 6) /*!< Enable SRAM1_0 retention when entering in Low power modes */
187#define LOWPOWER_SRAMRETCTRL_RETEN_RAM20 \
188 (1UL << 7) /*!< Enable SRAM2_0 retention when entering in Low power modes */
189#define LOWPOWER_SRAMRETCTRL_RETEN_RAM30 \
190 (1UL << 8) /*!< Enable SRAM3_0 retention when entering in Low power modes */
191#define LOWPOWER_SRAMRETCTRL_RETEN_RAM31 \
192 (1UL << 9) /*!< Enable SRAM3_1 retention when entering in Low power modes */
193#define LOWPOWER_SRAMRETCTRL_RETEN_RAM40 \
194 (1UL << 10) /*!< Enable SRAM4_0 retention when entering in Low power modes */
195#define LOWPOWER_SRAMRETCTRL_RETEN_RAM41 \
196 (1UL << 11) /*!< Enable SRAM4_1 retention when entering in Low power modes */
197#define LOWPOWER_SRAMRETCTRL_RETEN_RAM42 \
198 (1UL << 12) /*!< Enable SRAM4_2 retention when entering in Low power modes */
199#define LOWPOWER_SRAMRETCTRL_RETEN_RAM43 \
200 (1UL << 13) /*!< Enable SRAM4_3 retention when entering in Low power modes */
201#define LOWPOWER_SRAMRETCTRL_RETEN_RAM_USB_HS \
202 (1UL << 14) /*!< Enable SRAM USB HS retention when entering in Low power modes */
203#define LOWPOWER_SRAMRETCTRL_RETEN_RAM_PUF \
204 (1UL << 15) /*!< Enable SRAM PUFF retention when entering in Low power modes */
205
206/**
207 * @brief Low Power Modes Wake up sources
208 */
209#define WAKEUP_SYS (1ULL << 0) /*!< [SLEEP, DEEP SLEEP ] */ /* WWDT0_IRQ and BOD_IRQ*/
210#define WAKEUP_SDMA0 (1ULL << 1) /*!< [SLEEP, DEEP SLEEP ] */
211#define WAKEUP_GPIO_GLOBALINT0 (1ULL << 2) /*!< [SLEEP, DEEP SLEEP, POWER DOWN ] */
212#define WAKEUP_GPIO_GLOBALINT1 (1ULL << 3) /*!< [SLEEP, DEEP SLEEP, POWER DOWN ] */
213#define WAKEUP_GPIO_INT0_0 (1ULL << 4) /*!< [SLEEP, DEEP SLEEP ] */
214#define WAKEUP_GPIO_INT0_1 (1ULL << 5) /*!< [SLEEP, DEEP SLEEP ] */
215#define WAKEUP_GPIO_INT0_2 (1ULL << 6) /*!< [SLEEP, DEEP SLEEP ] */
216#define WAKEUP_GPIO_INT0_3 (1ULL << 7) /*!< [SLEEP, DEEP SLEEP ] */
217#define WAKEUP_UTICK (1ULL << 8) /*!< [SLEEP, ] */
218#define WAKEUP_MRT (1ULL << 9) /*!< [SLEEP, ] */
219#define WAKEUP_CTIMER0 (1ULL << 10) /*!< [SLEEP, DEEP SLEEP ] */
220#define WAKEUP_CTIMER1 (1ULL << 11) /*!< [SLEEP, DEEP SLEEP ] */
221#define WAKEUP_SCT (1ULL << 12) /*!< [SLEEP, ] */
222#define WAKEUP_CTIMER3 (1ULL << 13) /*!< [SLEEP, DEEP SLEEP ] */
223#define WAKEUP_FLEXCOMM0 (1ULL << 14) /*!< [SLEEP, DEEP SLEEP ] */
224#define WAKEUP_FLEXCOMM1 (1ULL << 15) /*!< [SLEEP, DEEP SLEEP ] */
225#define WAKEUP_FLEXCOMM2 (1ULL << 16) /*!< [SLEEP, DEEP SLEEP ] */
226#define WAKEUP_FLEXCOMM3 (1ULL << 17) /*!< [SLEEP, DEEP SLEEP, POWER DOWN ] */
227#define WAKEUP_FLEXCOMM4 (1ULL << 18) /*!< [SLEEP, DEEP SLEEP ] */
228#define WAKEUP_FLEXCOMM5 (1ULL << 19) /*!< [SLEEP, DEEP SLEEP ] */
229#define WAKEUP_FLEXCOMM6 (1ULL << 20) /*!< [SLEEP, DEEP SLEEP ] */
230#define WAKEUP_FLEXCOMM7 (1ULL << 21) /*!< [SLEEP, DEEP SLEEP ] */
231#define WAKEUP_ADC (1ULL << 22) /*!< [SLEEP, ] */
232#define WAKEUP_ACMP_CAPT (1ULL << 24) /*!< [SLEEP, DEEP SLEEP, POWER DOWN ] */
233// reserved (1ULL << 25)
234// reserved (1ULL << 26)
235#define WAKEUP_USB0_NEEDCLK (1ULL << 27) /*!< [SLEEP, DEEP SLEEP ] */
236#define WAKEUP_USB0 (1ULL << 28) /*!< [SLEEP, DEEP SLEEP ] */
237#define WAKEUP_RTC_LITE_ALARM_WAKEUP (1ULL << 29) /*!< [SLEEP, DEEP SLEEP, POWER DOWN, DEEP POWER DOWN] */
238#define WAKEUP_EZH_ARCH_B (1ULL << 30) /*!< [SLEEP, ] */
239#define WAKEUP_WAKEUP_MAILBOX (1ULL << 31) /*!< [SLEEP, DEEP SLEEP, POWER DOWN ] */
240#define WAKEUP_GPIO_INT0_4 (1ULL << 32) /*!< [SLEEP, DEEP SLEEP ] */
241#define WAKEUP_GPIO_INT0_5 (1ULL << 33) /*!< [SLEEP, DEEP SLEEP ] */
242#define WAKEUP_GPIO_INT0_6 (1ULL << 34) /*!< [SLEEP, DEEP SLEEP ] */
243#define WAKEUP_GPIO_INT0_7 (1ULL << 35) /*!< [SLEEP, DEEP SLEEP ] */
244#define WAKEUP_CTIMER2 (1ULL << 36) /*!< [SLEEP, DEEP SLEEP ] */
245#define WAKEUP_CTIMER4 (1ULL << 37) /*!< [SLEEP, DEEP SLEEP ] */
246#define WAKEUP_OS_EVENT_TIMER (1ULL << 38) /*!< [SLEEP, DEEP SLEEP, POWER DOWN, DEEP POWER DOWN] */
247// reserved (1ULL << 39)
248// reserved (1ULL << 40)
249// reserved (1ULL << 41)
250#define WAKEUP_SDIO (1ULL << 42) /*!< [SLEEP, ] */
251// reserved (1ULL << 43)
252// reserved (1ULL << 44)
253// reserved (1ULL << 45)
254// reserved (1ULL << 46)
255#define WAKEUP_USB1 (1ULL << 47) /*!< [SLEEP, DEEP SLEEP ] */
256#define WAKEUP_USB1_NEEDCLK (1ULL << 48) /*!< [SLEEP, DEEP SLEEP ] */
257#define WAKEUP_SEC_HYPERVISOR_CALL (1ULL << 49) /*!< [SLEEP, ] */
258#define WAKEUP_SEC_GPIO_INT0_0 (1ULL << 50) /*!< [SLEEP, DEEP SLEEP ] */
259#define WAKEUP_SEC_GPIO_INT0_1 (1ULL << 51) /*!< [SLEEP, DEEP SLEEP ] */
260#define WAKEUP_PLU (1ULL << 52) /*!< [SLEEP, DEEP SLEEP ] */
261#define WAKEUP_SEC_VIO (1ULL << 53)
262#define WAKEUP_SHA (1ULL << 54) /*!< [SLEEP, ] */
263#define WAKEUP_CASPER (1ULL << 55) /*!< [SLEEP, ] */
264#define WAKEUP_PUFF (1ULL << 56) /*!< [SLEEP, ] */
265#define WAKEUP_PQ (1ULL << 57) /*!< [SLEEP, ] */
266#define WAKEUP_SDMA1 (1ULL << 58) /*!< [SLEEP, DEEP SLEEP ] */
267#define WAKEUP_LSPI_HS (1ULL << 59) /*!< [SLEEP, DEEP SLEEP ] */
268// reserved WAKEUP_PVTVF0_AMBER (1ULL << 60)
269// reserved WAKEUP_PVTVF0_RED (1ULL << 61)
270// reserved WAKEUP_PVTVF1_AMBER (1ULL << 62)
271#define WAKEUP_ALLWAKEUPIOS (1ULL << 63) /*!< [ , DEEP POWER DOWN] */
272
273/**
274 * @brief Sleep Postpone
275 */
276#define LOWPOWER_HWWAKE_FORCED (1UL << 0) /*!< Force peripheral clocking to stay on during deep-sleep mode. */
277#define LOWPOWER_HWWAKE_PERIPHERALS \
278 (1UL << 1) /*!< Wake for Flexcomms. Any Flexcomm FIFO reaching the level specified by its own TXLVL will cause \
279 peripheral clocking to wake up temporarily while the related status is asserted */
280#define LOWPOWER_HWWAKE_SDMA0 \
281 (1UL << 3) /*!< Wake for DMA0. DMA0 being busy will cause peripheral clocking to remain running until DMA \
282 completes. Used in conjonction with LOWPOWER_HWWAKE_PERIPHERALS */
283#define LOWPOWER_HWWAKE_SDMA1 \
284 (1UL << 5) /*!< Wake for DMA1. DMA0 being busy will cause peripheral clocking to remain running until DMA \
285 completes. Used in conjonction with LOWPOWER_HWWAKE_PERIPHERALS */
286#define LOWPOWER_HWWAKE_ENABLE_FRO192M \
287 (1UL << 31) /*!< Need to be set if FRO192M is disable - via PDCTRL0 - in Deep Sleep mode and any of \
288 LOWPOWER_HWWAKE_PERIPHERALS, LOWPOWER_HWWAKE_SDMA0 or LOWPOWER_HWWAKE_SDMA1 is set */
289
290#define LOWPOWER_CPURETCTRL_ENA_DISABLE 0 /*!< In POWER DOWN mode, CPU Retention is disabled */
291#define LOWPOWER_CPURETCTRL_ENA_ENABLE 1 /*!< In POWER DOWN mode, CPU Retention is enabled */
292/**
293 * @brief Wake up I/O sources
294 */
295#define LOWPOWER_WAKEUPIOSRC_PIO0_INDEX 0 /*!< Pin P1( 1) */
296#define LOWPOWER_WAKEUPIOSRC_PIO1_INDEX 2 /*!< Pin P0(28) */
297#define LOWPOWER_WAKEUPIOSRC_PIO2_INDEX 4 /*!< Pin P1(18) */
298#define LOWPOWER_WAKEUPIOSRC_PIO3_INDEX 6 /*!< Pin P1(30) */
299
300#define LOWPOWER_WAKEUPIOSRC_DISABLE 0 /*!< Wake up is disable */
301#define LOWPOWER_WAKEUPIOSRC_RISING 1 /*!< Wake up on rising edge */
302#define LOWPOWER_WAKEUPIOSRC_FALLING 2 /*!< Wake up on falling edge */
303#define LOWPOWER_WAKEUPIOSRC_RISING_FALLING 3 /*!< Wake up on both rising or falling edges */
304
305#define LOWPOWER_WAKEUPIO_PIO0_PULLUPDOWN_INDEX 8 /*!< Wake-up I/O 0 pull-up/down configuration index */
306#define LOWPOWER_WAKEUPIO_PIO1_PULLUPDOWN_INDEX 9 /*!< Wake-up I/O 1 pull-up/down configuration index */
307#define LOWPOWER_WAKEUPIO_PIO2_PULLUPDOWN_INDEX 10 /*!< Wake-up I/O 2 pull-up/down configuration index */
308#define LOWPOWER_WAKEUPIO_PIO3_PULLUPDOWN_INDEX 11 /*!< Wake-up I/O 3 pull-up/down configuration index */
309
310#define LOWPOWER_WAKEUPIO_PIO0_PULLUPDOWN_MASK \
311 (1UL << LOWPOWER_WAKEUPIO_PIO0_PULLUPDOWN_INDEX) /*!< Wake-up I/O 0 pull-up/down mask */
312#define LOWPOWER_WAKEUPIO_PIO1_PULLUPDOWN_MASK \
313 (1UL << LOWPOWER_WAKEUPIO_PIO1_PULLUPDOWN_INDEX) /*!< Wake-up I/O 1 pull-up/down mask */
314#define LOWPOWER_WAKEUPIO_PIO2_PULLUPDOWN_MASK \
315 (1UL << LOWPOWER_WAKEUPIO_PIO2_PULLUPDOWN_INDEX) /*!< Wake-up I/O 2 pull-up/down mask */
316#define LOWPOWER_WAKEUPIO_PIO3_PULLUPDOWN_MASK \
317 (1UL << LOWPOWER_WAKEUPIO_PIO3_PULLUPDOWN_INDEX) /*!< Wake-up I/O 3 pull-up/down mask */
318
319#define LOWPOWER_WAKEUPIO_PULLDOWN 0 /*!< Select pull-down */
320#define LOWPOWER_WAKEUPIO_PULLUP 1 /*!< Select pull-up */
321
322#define LOWPOWER_WAKEUPIO_PIO0_DISABLEPULLUPDOWN_INDEX \
323 12 /*!< Wake-up I/O 0 pull-up/down disable/enable control index */
324#define LOWPOWER_WAKEUPIO_PIO1_DISABLEPULLUPDOWN_INDEX \
325 13 /*!< Wake-up I/O 1 pull-up/down disable/enable control index */
326#define LOWPOWER_WAKEUPIO_PIO2_DISABLEPULLUPDOWN_INDEX \
327 14 /*!< Wake-up I/O 2 pull-up/down disable/enable control index */
328#define LOWPOWER_WAKEUPIO_PIO3_DISABLEPULLUPDOWN_INDEX \
329 15 /*!< Wake-up I/O 3 pull-up/down disable/enable control index */
330#define LOWPOWER_WAKEUPIO_PIO0_DISABLEPULLUPDOWN_MASK \
331 (1UL << LOWPOWER_WAKEUPIO_PIO0_DISABLEPULLUPDOWN_INDEX) /*!< Wake-up I/O 0 pull-up/down disable/enable mask */
332#define LOWPOWER_WAKEUPIO_PIO1_DISABLEPULLUPDOWN_MASK \
333 (1UL << LOWPOWER_WAKEUPIO_PIO1_DISABLEPULLUPDOWN_INDEX) /*!< Wake-up I/O 1 pull-up/down disable/enable mask */
334#define LOWPOWER_WAKEUPIO_PIO2_DISABLEPULLUPDOWN_MASK \
335 (1UL << LOWPOWER_WAKEUPIO_PIO2_DISABLEPULLUPDOWN_INDEX) /*!< Wake-up I/O 2 pull-up/down disable/enable mask */
336#define LOWPOWER_WAKEUPIO_PIO3_DISABLEPULLUPDOWN_MASK \
337 (1UL << LOWPOWER_WAKEUPIO_PIO3_DISABLEPULLUPDOWN_INDEX) /*!< Wake-up I/O 3 pull-up/down disable/enable mask */
338
339#define LOWPOWER_WAKEUPIO_PIO0_USEEXTERNALPULLUPDOWN_INDEX \
340 (16) /*!< Wake-up I/O 0 use external pull-up/down disable/enable control index*/
341#define LOWPOWER_WAKEUPIO_PIO1_USEEXTERNALPULLUPDOWN_INDEX \
342 (17) /*!< Wake-up I/O 1 use external pull-up/down disable/enable control index */
343#define LOWPOWER_WAKEUPIO_PIO2_USEEXTERNALPULLUPDOWN_INDEX \
344 (18) /*!< Wake-up I/O 2 use external pull-up/down disable/enable control index */
345#define LOWPOWER_WAKEUPIO_PIO3_USEEXTERNALPULLUPDOWN_INDEX \
346 (19) /*!< Wake-up I/O 3 use external pull-up/down disable/enable control index */
347#define LOWPOWER_WAKEUPIO_PIO0_USEEXTERNALPULLUPDOWN_MASK \
348 (1UL << LOWPOWER_WAKEUPIO_PIO0_USEEXTERNALPULLUPDOWN_INDEX) /*!< Wake-up I/O 0 use external pull-up/down \
349 disable/enable mask, 0: disable, 1: enable */
350#define LOWPOWER_WAKEUPIO_PIO1_USEEXTERNALPULLUPDOWN_MASK \
351 (1UL << LOWPOWER_WAKEUPIO_PIO1_USEEXTERNALPULLUPDOWN_INDEX) /*!< Wake-up I/O 1 use external pull-up/down \
352 disable/enable mask, 0: disable, 1: enable */
353#define LOWPOWER_WAKEUPIO_PIO2_USEEXTERNALPULLUPDOWN_MASK \
354 (1UL << LOWPOWER_WAKEUPIO_PIO2_USEEXTERNALPULLUPDOWN_INDEX) /*!< Wake-up I/O 2 use external pull-up/down \
355 disable/enable mask, 0: disable, 1: enable */
356#define LOWPOWER_WAKEUPIO_PIO3_USEEXTERNALPULLUPDOWN_MASK \
357 (1UL << LOWPOWER_WAKEUPIO_PIO3_USEEXTERNALPULLUPDOWN_INDEX) /*!< Wake-up I/O 3 use external pull-up/down \
358 disable/enable mask, 0: disable, 1: enable */
359
360#ifdef __cplusplus
361extern "C" {
362#endif
363/*******************************************************************************
364 * API
365 ******************************************************************************/
366
367/*!
368 * @brief API to enable PDRUNCFG bit in the Syscon. Note that enabling the bit powers down the peripheral
369 *
370 * @param en peripheral for which to enable the PDRUNCFG bit
371 * @return none
372 */
373static inline void POWER_EnablePD(pd_bit_t en)
374{
375 /* PDRUNCFGSET */
376 PMC->PDRUNCFGSET0 = (uint32_t)en;
377}
378
379/*!
380 * @brief API to disable PDRUNCFG bit in the Syscon. Note that disabling the bit powers up the peripheral
381 *
382 * @param en peripheral for which to disable the PDRUNCFG bit
383 * @return none
384 */
385static inline void POWER_DisablePD(pd_bit_t en)
386{
387 /* PDRUNCFGCLR */
388 PMC->PDRUNCFGCLR0 = (uint32_t)en;
389}
390
391/*!
392 * @brief set BOD VBAT level.
393 *
394 * @param level BOD detect level
395 * @param hyst BoD Hysteresis control
396 * @param enBodVbatReset VBAT brown out detect reset
397 */
398static inline void POWER_SetBodVbatLevel(power_bod_vbat_level_t level, power_bod_hyst_t hyst, bool enBodVbatReset)
399{
400 PMC->BODVBAT = (PMC->BODVBAT & (~(PMC_BODVBAT_TRIGLVL_MASK | PMC_BODVBAT_HYST_MASK))) | PMC_BODVBAT_TRIGLVL(level) |
401 PMC_BODVBAT_HYST(hyst);
402 PMC->RESETCTRL =
403 (PMC->RESETCTRL & (~PMC_RESETCTRL_BODVBATRESETENABLE_MASK)) | PMC_RESETCTRL_BODVBATRESETENABLE(enBodVbatReset);
404}
405
406#if defined(PMC_BODCORE_TRIGLVL_MASK)
407/*!
408 * @brief set BOD core level.
409 *
410 * @param level BOD detect level
411 * @param hyst BoD Hysteresis control
412 * @param enBodCoreReset core brown out detect reset
413 */
414static inline void POWER_SetBodCoreLevel(power_bod_core_level_t level, power_bod_hyst_t hyst, bool enBodCoreReset)
415{
416 PMC->BODCORE = (PMC->BODCORE & (~(PMC_BODCORE_TRIGLVL_MASK | PMC_BODCORE_HYST_MASK))) | PMC_BODCORE_TRIGLVL(level) |
417 PMC_BODCORE_HYST(hyst);
418 PMC->RESETCTRL =
419 (PMC->RESETCTRL & (~PMC_RESETCTRL_BODCORERESETENABLE_MASK)) | PMC_RESETCTRL_BODCORERESETENABLE(enBodCoreReset);
420}
421#endif
422
423/*!
424 * @brief API to enable deep sleep bit in the ARM Core.
425 *
426 * @return none
427 */
428static inline void POWER_EnableDeepSleep(void)
429{
430 SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
431}
432
433/*!
434 * @brief API to disable deep sleep bit in the ARM Core.
435 *
436 * @return none
437 */
438static inline void POWER_DisableDeepSleep(void)
439{
440 SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
441}
442
443/**
444 * @brief Shut off the Flash and execute the _WFI(), then power up the Flash after wake-up event
445 * This MUST BE EXECUTED outside the Flash:
446 * either from ROM or from SRAM. The rest could stay in Flash. But, for consistency, it is
447 * preferable to have all functions defined in this file implemented in ROM.
448 *
449 * @return Nothing
450 */
451void POWER_CycleCpuAndFlash(void);
452
453/**
454 * @brief Configures and enters in DEEP-SLEEP low power mode
455 * @param exclude_from_pd:
456 * @param sram_retention_ctrl:
457 * @param wakeup_interrupts:
458 * @param hardware_wake_ctrl:
459
460 * @return Nothing
461 *
462 * !!! IMPORTANT NOTES :
463 0 - CPU0 & System CLock frequency is switched to FRO12MHz and is NOT restored back by the API.
464 * 1 - CPU0 Interrupt Enable registers (NVIC->ISER) are modified by this function. They are restored back in
465 case of CPU retention or if POWERDOWN is not taken (for instance because an interrupt is pending).
466 * 2 - The Non Maskable Interrupt (NMI) is disabled and its configuration before calling this function will be
467 restored back if POWERDOWN is not taken (for instance because an RTC or OSTIMER interrupt is pending).
468 * 3 - The HARD FAULT handler should execute from SRAM. (The Hard fault handler should initiate a full chip
469 reset) reset)
470 */
471void POWER_EnterDeepSleep(uint32_t exclude_from_pd,
472 uint32_t sram_retention_ctrl,
473 uint64_t wakeup_interrupts,
474 uint32_t hardware_wake_ctrl);
475
476/**
477 * @brief Configures and enters in POWERDOWN low power mode
478 * @param exclude_from_pd:
479 * @param sram_retention_ctrl:
480 * @param wakeup_interrupts:
481 * @param cpu_retention_ctrl: 0 = CPU retention is disable / 1 = CPU retention is enabled, all other values are
482 RESERVED.
483
484 * @return Nothing
485 *
486 * !!! IMPORTANT NOTES :
487 0 - CPU0 & System CLock frequency is switched to FRO12MHz and is NOT restored back by the API.
488 * 1 - CPU0 Interrupt Enable registers (NVIC->ISER) are modified by this function. They are restored back in
489 case of CPU retention or if POWERDOWN is not taken (for instance because an interrupt is pending).
490 * 2 - The Non Maskable Interrupt (NMI) is disabled and its configuration before calling this function will be
491 restored back if POWERDOWN is not taken (for instance because an RTC or OSTIMER interrupt is pending).
492 * 3 - In case of CPU retention, it is the responsability of the user to make sure that SRAM instance
493 containing the stack used to call this function WILL BE preserved during low power (via parameter
494 "sram_retention_ctrl")
495 * 4 - The HARD FAULT handler should execute from SRAM. (The Hard fault handler should initiate a full chip
496 reset) reset)
497 */
498
499void POWER_EnterPowerDown(uint32_t exclude_from_pd,
500 uint32_t sram_retention_ctrl,
501 uint64_t wakeup_interrupts,
502 uint32_t cpu_retention_ctrl);
503
504/**
505 * @brief Configures and enters in DEEPPOWERDOWN low power mode
506 * @param exclude_from_pd:
507 * @param sram_retention_ctrl:
508 * @param wakeup_interrupts:
509 * @param wakeup_io_ctrl:
510
511 * @return Nothing
512 *
513 * !!! IMPORTANT NOTES :
514 0 - CPU0 & System CLock frequency is switched to FRO12MHz and is NOT restored back by the API.
515 * 1 - CPU0 Interrupt Enable registers (NVIC->ISER) are modified by this function. They are restored back if
516 DEEPPOWERDOWN is not taken (for instance because an RTC or OSTIMER interrupt is pending).
517 * 2 - The Non Maskable Interrupt (NMI) is disabled and its configuration before calling this function will be
518 restored back if DEEPPOWERDOWN is not taken (for instance because an RTC or OSTIMER interrupt is pending).
519 * 3 - The HARD FAULT handler should execute from SRAM. (The Hard fault handler should initiate a full chip
520 reset)
521 */
522void POWER_EnterDeepPowerDown(uint32_t exclude_from_pd,
523 uint32_t sram_retention_ctrl,
524 uint64_t wakeup_interrupts,
525 uint32_t wakeup_io_ctrl);
526
527/**
528 * @brief Configures and enters in SLEEP low power mode
529 * @param :
530 * @return Nothing
531 */
532void POWER_EnterSleep(void);
533
534/*!
535 * @brief Power Library API to choose normal regulation and set the voltage for the desired operating frequency.
536 *
537 * @param system_freq_hz - The desired frequency (in Hertz) at which the part would like to operate,
538 * note that the voltage and flash wait states should be set before changing frequency
539 * @return none
540 */
541void POWER_SetVoltageForFreq(uint32_t system_freq_hz);
542
543/*!
544 * @brief Power Library API to return the library version.
545 *
546 * @return version number of the power library
547 */
548uint32_t POWER_GetLibVersion(void);
549
550/**
551 * @brief Sets board-specific trim values for 16MHz XTAL
552 * @param pi32_16MfXtalIecLoadpF_x100 Load capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF becomes 120
553 * @param pi32_16MfXtalPPcbParCappF_x100 PCB +ve parasitic capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF
554 * becomes 120
555 * @param pi32_16MfXtalNPcbParCappF_x100 PCB -ve parasitic capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF
556 * becomes 120
557 * @return none
558 * @note Following default Values can be used:
559 * pi32_32MfXtalIecLoadpF_x100 Load capacitance, pF x 100 : 600
560 * pi32_32MfXtalPPcbParCappF_x100 PCB +ve parasitic capacitance, pF x 100 : 20
561 * pi32_32MfXtalNPcbParCappF_x100 PCB -ve parasitic capacitance, pF x 100 : 40
562 */
563extern void POWER_Xtal16mhzCapabankTrim(int32_t pi32_16MfXtalIecLoadpF_x100,
564 int32_t pi32_16MfXtalPPcbParCappF_x100,
565 int32_t pi32_16MfXtalNPcbParCappF_x100);
566/**
567 * @brief Sets board-specific trim values for 32kHz XTAL
568 * @param pi32_32kfXtalIecLoadpF_x100 Load capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF becomes 120
569 * @param pi32_32kfXtalPPcbParCappF_x100 PCB +ve parasitic capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF
570 becomes 120
571 * @param pi32_32kfXtalNPcbParCappF_x100 PCB -ve parasitic capacitance, pF x 100. For example, 6pF becomes 600, 1.2pF
572 becomes 120
573
574 * @return none
575 * @note Following default Values can be used:
576 * pi32_32kfXtalIecLoadpF_x100 Load capacitance, pF x 100 : 600
577 * pi32_32kfXtalPPcbParCappF_x100 PCB +ve parasitic capacitance, pF x 100 : 40
578 * pi32_32kfXtalNPcbParCappF_x100 PCB -ve parasitic capacitance, pF x 100 : 40
579 */
580extern void POWER_Xtal32khzCapabankTrim(int32_t pi32_32kfXtalIecLoadpF_x100,
581 int32_t pi32_32kfXtalPPcbParCappF_x100,
582 int32_t pi32_32kfXtalNPcbParCappF_x100);
583/**
584 * @brief Enables and sets LDO for 16MHz XTAL
585 *
586 * @return none
587 */
588extern void POWER_SetXtal16mhzLdo(void);
589
590/**
591 * @brief Set up 16-MHz XTAL Trimmings
592 * @param amp Amplitude
593 * @param gm Transconductance
594 * @return none
595 */
596extern void POWER_SetXtal16mhzTrim(uint32_t amp, uint32_t gm);
597
598/**
599 * @brief Return some key information related to the device reset causes / wake-up sources, for all power modes.
600 * @param p_reset_cause : the device reset cause, according to the definition of power_device_reset_cause_t type.
601 * @param p_boot_mode : the device boot mode, according to the definition of power_device_boot_mode_t type.
602 * @param p_wakeupio_cause: the wake-up pin sources, according to the definition of register PMC->WAKEIOCAUSE[3:0].
603
604 * @return Nothing
605 *
606 * !!! IMPORTANT ERRATA - IMPORTANT ERRATA - IMPORTANT ERRATA !!!
607 * !!! valid ONLY for LPC55S69 (not for LPC55S16 and LPC55S06) !!!
608 * !!! when FALLING EDGE DETECTION is enabled on wake-up pins: !!!
609 * - 1. p_wakeupio_cause is NOT ACCURATE
610 * - 2. Spurious kRESET_CAUSE_DPDRESET_WAKEUPIO* event is reported when
611 * several wake-up sources are enabled during DEEP-POWER-DOWN
612 * (like enabling wake-up on RTC and Falling edge wake-up pins)
613 *
614 */
615void POWER_GetWakeUpCause(power_device_reset_cause_t *p_reset_cause,
616 power_device_boot_mode_t *p_boot_mode,
617 uint32_t *p_wakeupio_cause);
618#ifdef __cplusplus
619}
620#endif
621
622/**
623 * @}
624 */
625
626#endif /* _FSL_POWER_H_ */
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-30 16:59:47 +0100