1 files changed, 251 insertions, 0 deletions

diff --git a/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S66/project_template/board.h b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S66/project_template/board.h
new file mode 100644
index 000000000..870d99aeb
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/devices/LPC55S66/project_template/board.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2017-2018 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#include "clock_config.h"
+#include "fsl_common.h"
+#include "fsl_reset.h"
+#include "fsl_gpio.h"
+#include "fsl_iocon.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief The board name */
+#define BOARD_NAME "LPCXpresso55S69"
+
+/*! @brief The UART to use for debug messages. */
+/* TODO: rename UART to USART */
+#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
+#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
+#define BOARD_DEBUG_UART_INSTANCE 0U
+#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
+#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
+#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
+#define BOARD_DEBUG_UART_CLKSRC kCLOCK_Flexcomm0
+#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
+#define BOARD_UART_IRQ FLEXCOMM0_IRQn
+
+#define BOARD_ACCEL_I2C_BASEADDR I2C4
+#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000
+
+#define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart
+#define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART1
+#define BOARD_DEBUG_UART_INSTANCE_CORE1 1U
+#define BOARD_DEBUG_UART_CLK_FREQ_CORE1 12000000U
+#define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kFRO12M_to_FLEXCOMM1
+#define BOARD_DEBUG_UART_RST_CORE1 kFC1_RST_SHIFT_RSTn
+#define BOARD_DEBUG_UART_CLKSRC_CORE1 kCLOCK_Flexcomm1
+#define BOARD_UART_IRQ_HANDLER_CORE1 FLEXCOMM1_IRQHandler
+#define BOARD_UART_IRQ_CORE1 FLEXCOMM1_IRQn
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE
+#define BOARD_DEBUG_UART_BAUDRATE 115200U
+#endif /* BOARD_DEBUG_UART_BAUDRATE */
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1
+#define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200U
+#endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */
+
+#define BOARD_CODEC_I2C_BASEADDR I2C4
+#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000
+
+#ifndef BOARD_LED_RED_GPIO
+#define BOARD_LED_RED_GPIO GPIO
+#endif
+#define BOARD_LED_RED_GPIO_PORT 1U
+#ifndef BOARD_LED_RED_GPIO_PIN
+#define BOARD_LED_RED_GPIO_PIN 6U
+#endif
+
+#ifndef BOARD_LED_BLUE_GPIO
+#define BOARD_LED_BLUE_GPIO GPIO
+#endif
+#define BOARD_LED_BLUE_GPIO_PORT 1U
+#ifndef BOARD_LED_BLUE_GPIO_PIN
+#define BOARD_LED_BLUE_GPIO_PIN 4U
+#endif
+
+#ifndef BOARD_LED_GREEN_GPIO
+#define BOARD_LED_GREEN_GPIO GPIO
+#endif
+#define BOARD_LED_GREEN_GPIO_PORT 1U
+#ifndef BOARD_LED_GREEN_GPIO_PIN
+#define BOARD_LED_GREEN_GPIO_PIN 7U
+#endif
+
+#ifndef BOARD_SW1_GPIO
+#define BOARD_SW1_GPIO GPIO
+#endif
+#define BOARD_SW1_GPIO_PORT 0U
+#ifndef BOARD_SW1_GPIO_PIN
+#define BOARD_SW1_GPIO_PIN 5U
+#endif
+#define BOARD_SW1_NAME "SW1"
+#define BOARD_SW1_IRQ PIN_INT0_IRQn
+#define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler
+
+#ifndef BOARD_SW2_GPIO
+#define BOARD_SW2_GPIO GPIO
+#endif
+#define BOARD_SW2_GPIO_PORT 1U
+#ifndef BOARD_SW2_GPIO_PIN
+#define BOARD_SW2_GPIO_PIN 18U
+#endif
+#define BOARD_SW2_NAME "SW2"
+#define BOARD_SW2_IRQ PIN_INT1_IRQn
+#define BOARD_SW2_IRQ_HANDLER PIN_INT1_IRQHandler
+#define BOARD_SW2_GPIO_PININT_INDEX 1
+
+#ifndef BOARD_SW3_GPIO
+#define BOARD_SW3_GPIO GPIO
+#endif
+#define BOARD_SW3_GPIO_PORT 1U
+#ifndef BOARD_SW3_GPIO_PIN
+#define BOARD_SW3_GPIO_PIN 9U
+#endif
+#define BOARD_SW3_NAME "SW3"
+#define BOARD_SW3_IRQ PIN_INT1_IRQn
+#define BOARD_SW3_IRQ_HANDLER PIN_INT1_IRQHandler
+#define BOARD_SW3_GPIO_PININT_INDEX 1
+
+#define BOARD_SDIF_BASEADDR SDIF
+#define BOARD_SDIF_CLKSRC kCLOCK_SDio
+#define BOARD_SDIF_CLK_FREQ CLOCK_GetSdioClkFreq()
+#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
+#define BOARD_SDIF_IRQ SDIO_IRQn
+#define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360
+#define BOARD_SD_CARD_DETECT_PIN 17
+#define BOARD_SD_CARD_DETECT_PORT 0
+#define BOARD_SD_CARD_DETECT_GPIO GPIO
+#define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD
+
+#define BOARD_SDIF_CD_GPIO_INIT()                                                                    \
+    {                                                                                                \
+        CLOCK_EnableClock(kCLOCK_Gpio2);                                                             \
+        GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \
+                     &(gpio_pin_config_t){kGPIO_DigitalInput, 0U});                                  \
+    }
+#define BOARD_SDIF_CD_STATUS() \
+    GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN)
+
+/* Board led color mapping */
+#define LOGIC_LED_ON 0U
+#define LOGIC_LED_OFF 1U
+
+#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
+
+#define LED_RED_INIT(output)                                                                                   \
+    {                                                                                                          \
+        IOCON_PinMuxSet(IOCON, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN,                                \
+                        (IOCON_PIO_FUNC0 | IOCON_PIO_MODE_INACT | IOCON_PIO_SLEW_STANDARD | IOCON_PIO_INV_DI | \
+                         IOCON_PIO_DIGITAL_EN | IOCON_PIO_OPENDRAIN_DI));                                      \
+        GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN,                      \
+                     &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */          \
+    }
+#define LED_RED_ON()                                            \
+    GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
+                   1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED1 */
+#define LED_RED_OFF()                                                                        \
+    GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT,                                \
+                 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED1 \ \ \ \ \ \ \ \ \ \ \
+                                                */
+#define LED_RED_TOGGLE()                                         \
+    GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
+                    1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED1 */
+
+#define LED_BLUE_INIT(output)                                                                                  \
+    {                                                                                                          \
+        IOCON_PinMuxSet(IOCON, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN,                              \
+                        (IOCON_PIO_FUNC0 | IOCON_PIO_MODE_INACT | IOCON_PIO_SLEW_STANDARD | IOCON_PIO_INV_DI | \
+                         IOCON_PIO_DIGITAL_EN | IOCON_PIO_OPENDRAIN_DI));                                      \
+        GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN,                   \
+                     &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */          \
+    }
+#define LED_BLUE_ON()                                             \
+    GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
+                   1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED1 */
+#define LED_BLUE_OFF()                                          \
+    GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
+                 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED1 */
+#define LED_BLUE_TOGGLE()                                          \
+    GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
+                    1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED1 */
+
+#define LED_GREEN_INIT(output)                                                              \
+    GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
+                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
+#define LED_GREEN_ON()                                              \
+    GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
+                   1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED1 */
+#define LED_GREEN_OFF()                                           \
+    GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
+                 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED1 */
+#define LED_GREEN_TOGGLE()                                           \
+    GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
+                    1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED1 */
+
+/*! @brief The WIFI-QCA shield pin. */
+#define BOARD_INITGT202SHIELD_PWRON_GPIO GPIO
+#define BOARD_INITGT202SHIELD_PWRON_PORT 1U
+#define BOARD_INITGT202SHIELD_PWRON_PIN 8U
+
+#define BOARD_INITGT202SHIELD_IRQ_GPIO GPIO
+#define BOARD_INITGT202SHIELD_IRQ_PORT 1U
+#define BOARD_INITGT202SHIELD_IRQ_PIN 9U
+
+/*! @brief The WIFI-QCA shield pin. */
+#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO
+#define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U
+#define BOARD_INITSILEX2401SHIELD_PWRON_PIN 7U
+
+#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO
+#define BOARD_INITSILEX2401SHIELD_IRQ_PORT 0U
+#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 15U
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+void BOARD_InitDebugConsole(void);
+void BOARD_InitDebugConsole_Core1(void);
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
+status_t BOARD_I2C_Send(I2C_Type *base,
+                        uint8_t deviceAddress,
+                        uint32_t subAddress,
+                        uint8_t subaddressSize,
+                        uint8_t *txBuff,
+                        uint8_t txBuffSize);
+status_t BOARD_I2C_Receive(I2C_Type *base,
+                           uint8_t deviceAddress,
+                           uint32_t subAddress,
+                           uint8_t subaddressSize,
+                           uint8_t *rxBuff,
+                           uint8_t rxBuffSize);
+void BOARD_Accel_I2C_Init(void);
+status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
+status_t BOARD_Accel_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+void BOARD_Codec_I2C_Init(void);
+status_t BOARD_Codec_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Codec_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+#endif /* _BOARD_H_ */