1 files changed, 550 insertions, 0 deletions

diff --git a/lib/chibios-contrib/ext/mcux-sdk/devices/MIMXRT1015/MIMXRT1015_features.h b/lib/chibios-contrib/ext/mcux-sdk/devices/MIMXRT1015/MIMXRT1015_features.h
new file mode 100644
index 000000000..8dff2d3bb
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/devices/MIMXRT1015/MIMXRT1015_features.h
@@ -0,0 +1,550 @@
+/*
+** ###################################################################
+**     Version:             rev. 1.1, 2019-02-20
+**     Build:               b201019
+**
+**     Abstract:
+**         Chip specific module features.
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2020 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 [email protected]
+**
+**     Revisions:
+**     - rev. 0.1 (2018-11-05)
+**         Initial version.
+**     - rev. 1.0 (2019-01-18)
+**         Rev.0 Header GA
+**     - rev. 1.1 (2019-02-20)
+**         Update register SRC_SRSR's bitfield LOCKUP_SYSRESETREQ to LOCKUP.
+**
+** ###################################################################
+*/
+
+#ifndef _MIMXRT1015_FEATURES_H_
+#define _MIMXRT1015_FEATURES_H_
+
+/* SOC module features */
+
+/* @brief ADC availability on the SoC. */
+#define FSL_FEATURE_SOC_ADC_COUNT (1)
+/* @brief AIPSTZ availability on the SoC. */
+#define FSL_FEATURE_SOC_AIPSTZ_COUNT (4)
+/* @brief AOI availability on the SoC. */
+#define FSL_FEATURE_SOC_AOI_COUNT (1)
+/* @brief CCM availability on the SoC. */
+#define FSL_FEATURE_SOC_CCM_COUNT (1)
+/* @brief CCM_ANALOG availability on the SoC. */
+#define FSL_FEATURE_SOC_CCM_ANALOG_COUNT (1)
+/* @brief DCDC availability on the SoC. */
+#define FSL_FEATURE_SOC_DCDC_COUNT (1)
+/* @brief DCP availability on the SoC. */
+#define FSL_FEATURE_SOC_DCP_COUNT (1)
+/* @brief DMAMUX availability on the SoC. */
+#define FSL_FEATURE_SOC_DMAMUX_COUNT (1)
+/* @brief EDMA availability on the SoC. */
+#define FSL_FEATURE_SOC_EDMA_COUNT (1)
+/* @brief ENC availability on the SoC. */
+#define FSL_FEATURE_SOC_ENC_COUNT (1)
+/* @brief EWM availability on the SoC. */
+#define FSL_FEATURE_SOC_EWM_COUNT (1)
+/* @brief FLEXIO availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXIO_COUNT (1)
+/* @brief FLEXRAM availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXRAM_COUNT (1)
+/* @brief FLEXSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXSPI_COUNT (1)
+/* @brief GPC availability on the SoC. */
+#define FSL_FEATURE_SOC_GPC_COUNT (1)
+/* @brief GPT availability on the SoC. */
+#define FSL_FEATURE_SOC_GPT_COUNT (2)
+/* @brief I2S availability on the SoC. */
+#define FSL_FEATURE_SOC_I2S_COUNT (3)
+/* @brief IGPIO availability on the SoC. */
+#define FSL_FEATURE_SOC_IGPIO_COUNT (4)
+/* @brief IOMUXC availability on the SoC. */
+#define FSL_FEATURE_SOC_IOMUXC_COUNT (1)
+/* @brief IOMUXC_GPR availability on the SoC. */
+#define FSL_FEATURE_SOC_IOMUXC_GPR_COUNT (1)
+/* @brief IOMUXC_SNVS availability on the SoC. */
+#define FSL_FEATURE_SOC_IOMUXC_SNVS_COUNT (1)
+/* @brief KPP availability on the SoC. */
+#define FSL_FEATURE_SOC_KPP_COUNT (1)
+/* @brief LPI2C availability on the SoC. */
+#define FSL_FEATURE_SOC_LPI2C_COUNT (2)
+/* @brief LPSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_LPSPI_COUNT (2)
+/* @brief LPUART availability on the SoC. */
+#define FSL_FEATURE_SOC_LPUART_COUNT (4)
+/* @brief OCOTP availability on the SoC. */
+#define FSL_FEATURE_SOC_OCOTP_COUNT (1)
+/* @brief PIT availability on the SoC. */
+#define FSL_FEATURE_SOC_PIT_COUNT (1)
+/* @brief PMU availability on the SoC. */
+#define FSL_FEATURE_SOC_PMU_COUNT (1)
+/* @brief PWM availability on the SoC. */
+#define FSL_FEATURE_SOC_PWM_COUNT (1)
+/* @brief ROMC availability on the SoC. */
+#define FSL_FEATURE_SOC_ROMC_COUNT (1)
+/* @brief SNVS availability on the SoC. */
+#define FSL_FEATURE_SOC_SNVS_COUNT (1)
+/* @brief SPDIF availability on the SoC. */
+#define FSL_FEATURE_SOC_SPDIF_COUNT (1)
+/* @brief SRC availability on the SoC. */
+#define FSL_FEATURE_SOC_SRC_COUNT (1)
+/* @brief TEMPMON availability on the SoC. */
+#define FSL_FEATURE_SOC_TEMPMON_COUNT (1)
+/* @brief TMR availability on the SoC. */
+#define FSL_FEATURE_SOC_TMR_COUNT (1)
+/* @brief TRNG availability on the SoC. */
+#define FSL_FEATURE_SOC_TRNG_COUNT (1)
+/* @brief USBHS availability on the SoC. */
+#define FSL_FEATURE_SOC_USBHS_COUNT (1)
+/* @brief USBNC availability on the SoC. */
+#define FSL_FEATURE_SOC_USBNC_COUNT (1)
+/* @brief USBPHY availability on the SoC. */
+#define FSL_FEATURE_SOC_USBPHY_COUNT (1)
+/* @brief USB_ANALOG availability on the SoC. */
+#define FSL_FEATURE_SOC_USB_ANALOG_COUNT (1)
+/* @brief WDOG availability on the SoC. */
+#define FSL_FEATURE_SOC_WDOG_COUNT (2)
+/* @brief XBARA availability on the SoC. */
+#define FSL_FEATURE_SOC_XBARA_COUNT (1)
+/* @brief XBARB availability on the SoC. */
+#define FSL_FEATURE_SOC_XBARB_COUNT (1)
+/* @brief XTALOSC24M availability on the SoC. */
+#define FSL_FEATURE_SOC_XTALOSC24M_COUNT (1)
+/* @brief ROM API Availability */
+#define FSL_FEATURE_BOOT_ROM_HAS_ROMAPI (1)
+
+/* ADC module features */
+
+/* @brief Remove Hardware Trigger feature. */
+#define FSL_FEATURE_ADC_SUPPORT_HARDWARE_TRIGGER_REMOVE (0)
+/* @brief Remove ALT Clock selection feature. */
+#define FSL_FEATURE_ADC_SUPPORT_ALTCLK_REMOVE (1)
+/* @brief Conversion control count (related to number of registers HCn and Rn). */
+#define FSL_FEATURE_ADC_CONVERSION_CONTROL_COUNT (8)
+
+/* ADC_ETC module features */
+
+/* @brief Has DMA model control(bit field CTRL[DMA_MODE_SEL]). */
+#define FSL_FEATURE_ADC_ETC_HAS_CTRL_DMA_MODE_SEL (1)
+/* @brief Has TRIGm_CHAIN_a_b IEn_EN. */
+#define FSL_FEATURE_ADC_ETC_HAS_TRIGm_CHAIN_a_b_IEn_EN (0)
+
+/* AOI module features */
+
+/* @brief Maximum value of input mux. */
+#define FSL_FEATURE_AOI_MODULE_INPUTS (4)
+/* @brief Number of events related to number of registers AOIx_BFCRT01n/AOIx_BFCRT23n. */
+#define FSL_FEATURE_AOI_EVENT_COUNT (4)
+
+/* CCM module features */
+
+/* @brief Is affected by errata with ID 50235 (Incorrect clock setting for CAN affects by LPUART clock gate). */
+#define FSL_FEATURE_CCM_HAS_ERRATA_50235 (0)
+
+/* DCDC module features */
+
+/* @brief Has CTRL register (register CTRL0/1). */
+#define FSL_FEATURE_DCDC_HAS_CTRL_REG (0)
+/* @brief DCDC VDD output count. */
+#define FSL_FEATURE_DCDC_VDD_OUTPUT_COUNT (1)
+/* @brief Has no current alert function (register bit field REG0[CURRENT_ALERT_RESET]). */
+#define FSL_FEATURE_DCDC_HAS_NO_CURRENT_ALERT_FUNC (0)
+/* @brief Has switching converter differential mode (register bit field REG1[LOOPCTRL_EN_DF_HYST]). */
+#define FSL_FEATURE_DCDC_HAS_SWITCHING_CONVERTER_DIFFERENTIAL_MODE (0)
+/* @brief Has register bit field REG0[REG_DCDC_IN_DET]. */
+#define FSL_FEATURE_DCDC_HAS_REG0_DCDC_IN_DET (0)
+/* @brief Has no register bit field REG0[EN_LP_OVERLOAD_SNS]. */
+#define FSL_FEATURE_DCDC_HAS_NO_REG0_EN_LP_OVERLOAD_SNS (0)
+/* @brief Has register bit field REG3[REG_FBK_SEL]). */
+#define FSL_FEATURE_DCDC_HAS_REG3_FBK_SEL (0)
+
+/* EDMA module features */
+
+/* @brief Number of DMA channels (related to number of registers TCD, DCHPRI, bit fields ERQ[ERQn], EEI[EEIn], INT[INTn], ERR[ERRn], HRS[HRSn] and bit field widths ES[ERRCHN], CEEI[CEEI], SEEI[SEEI], CERQ[CERQ], SERQ[SERQ], CDNE[CDNE], SSRT[SSRT], CERR[CERR], CINT[CINT], TCDn_CITER_ELINKYES[LINKCH], TCDn_CSR[MAJORLINKCH], TCDn_BITER_ELINKYES[LINKCH]). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_MODULE_CHANNEL (32)
+/* @brief Total number of DMA channels on all modules. */
+#define FSL_FEATURE_EDMA_DMAMUX_CHANNELS (32)
+/* @brief Number of DMA channel groups (register bit fields CR[ERGA], CR[GRPnPRI], ES[GPE], DCHPRIn[GRPPRI]). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT (1)
+/* @brief Has DMA_Error interrupt vector. */
+#define FSL_FEATURE_EDMA_HAS_ERROR_IRQ (1)
+/* @brief Number of DMA channels with asynchronous request capability (register EARS). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT (32)
+/* @brief Channel IRQ entry shared offset. */
+#define FSL_FEATURE_EDMA_MODULE_CHANNEL_IRQ_ENTRY_SHARED_OFFSET (16)
+/* @brief If 8 bytes transfer supported. */
+#define FSL_FEATURE_EDMA_SUPPORT_8_BYTES_TRANSFER (1)
+/* @brief If 16 bytes transfer supported. */
+#define FSL_FEATURE_EDMA_SUPPORT_16_BYTES_TRANSFER (0)
+/* @brief If 32 bytes transfer supported. */
+#define FSL_FEATURE_EDMA_SUPPORT_32_BYTES_TRANSFER (1)
+
+/* DMAMUX module features */
+
+/* @brief Number of DMA channels (related to number of register CHCFGn). */
+#define FSL_FEATURE_DMAMUX_MODULE_CHANNEL (32)
+/* @brief Total number of DMA channels on all modules. */
+#define FSL_FEATURE_DMAMUX_DMAMUX_CHANNELS (32)
+/* @brief Has the periodic trigger capability for the triggered DMA channel (register bit CHCFG0[TRIG]). */
+#define FSL_FEATURE_DMAMUX_HAS_TRIG (1)
+/* @brief Has DMA Channel Always ON function (register bit CHCFG0[A_ON]). */
+#define FSL_FEATURE_DMAMUX_HAS_A_ON (1)
+/* @brief Register CHCFGn width. */
+#define FSL_FEATURE_DMAMUX_CHCFG_REGISTER_WIDTH (32)
+
+/* EWM module features */
+
+/* @brief Has clock select (register CLKCTRL). */
+#define FSL_FEATURE_EWM_HAS_CLOCK_SELECT (1)
+/* @brief Has clock prescaler (register CLKPRESCALER). */
+#define FSL_FEATURE_EWM_HAS_PRESCALER (1)
+
+/* FLEXIO module features */
+
+/* @brief Has Shifter Status Register (FLEXIO_SHIFTSTAT) */
+#define FSL_FEATURE_FLEXIO_HAS_SHIFTER_STATUS (1)
+/* @brief Has Pin Data Input Register (FLEXIO_PIN) */
+#define FSL_FEATURE_FLEXIO_HAS_PIN_STATUS (1)
+/* @brief Has Shifter Buffer N Nibble Byte Swapped Register (FLEXIO_SHIFTBUFNBSn) */
+#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_BYTE_SWAP (1)
+/* @brief Has Shifter Buffer N Half Word Swapped Register (FLEXIO_SHIFTBUFHWSn) */
+#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_HALF_WORD_SWAP (1)
+/* @brief Has Shifter Buffer N Nibble Swapped Register (FLEXIO_SHIFTBUFNISn) */
+#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_SWAP (1)
+/* @brief Supports Shifter State Mode (FLEXIO_SHIFTCTLn[SMOD]) */
+#define FSL_FEATURE_FLEXIO_HAS_STATE_MODE (1)
+/* @brief Supports Shifter Logic Mode (FLEXIO_SHIFTCTLn[SMOD]) */
+#define FSL_FEATURE_FLEXIO_HAS_LOGIC_MODE (1)
+/* @brief Supports paralle width (FLEXIO_SHIFTCFGn[PWIDTH]) */
+#define FSL_FEATURE_FLEXIO_HAS_PARALLEL_WIDTH (1)
+/* @brief Reset value of the FLEXIO_VERID register */
+#define FSL_FEATURE_FLEXIO_VERID_RESET_VALUE (0x1010001)
+/* @brief Reset value of the FLEXIO_PARAM register */
+#define FSL_FEATURE_FLEXIO_PARAM_RESET_VALUE (0x2200808)
+/* @brief Flexio DMA request base channel */
+#define FSL_FEATURE_FLEXIO_DMA_REQUEST_BASE_CHANNEL (0)
+
+/* FLEXRAM module features */
+
+/* @brief Bank size */
+#define FSL_FEATURE_FLEXRAM_INTERNAL_RAM_BANK_SIZE (32768)
+/* @brief Total Bank numbers */
+#define FSL_FEATURE_FLEXRAM_INTERNAL_RAM_TOTAL_BANK_NUMBERS (4)
+/* @brief Has FLEXRAM_MAGIC_ADDR. */
+#define FSL_FEATURE_FLEXRAM_HAS_MAGIC_ADDR (0)
+
+/* FLEXSPI module features */
+
+/* @brief FlexSPI AHB buffer count */
+#define FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNTn(x) (4)
+/* @brief FlexSPI has no data learn. */
+#define FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN (1)
+/* @brief There is AHBBUSERROREN bit in INTEN register. */
+#define FSL_FEATURE_FLEXSPI_HAS_INTEN_AHBBUSERROREN (0)
+/* @brief There is CLRAHBTX_RXBUF bit in AHBCR register. */
+#define FSL_FEATURE_FLEXSPI_HAS_AHBCR_CLRAHBTX_RXBUF (0)
+
+/* GPC module features */
+
+/* @brief Has DVFS0 Change Request. */
+#define FSL_FEATURE_GPC_HAS_CNTR_DVFS0CR (0)
+/* @brief Has GPC interrupt/event masking. */
+#define FSL_FEATURE_GPC_HAS_CNTR_GPCIRQM (0)
+/* @brief Has L2 cache power control. */
+#define FSL_FEATURE_GPC_HAS_CNTR_L2PGE (0)
+/* @brief Has FLEXRAM PDRAM0(bank1-7) power control. */
+#define FSL_FEATURE_GPC_HAS_CNTR_PDRAM0PGE (1)
+/* @brief Has VADC power control. */
+#define FSL_FEATURE_GPC_HAS_CNTR_VADC (0)
+/* @brief Has Display power control. */
+#define FSL_FEATURE_GPC_HAS_CNTR_DISPLAY (0)
+/* @brief Supports IRQ 0-31. */
+#define FSL_FEATURE_GPC_HAS_IRQ_0_31 (1)
+
+/* IGPIO module features */
+
+/* @brief Has data register set DR_SET. */
+#define FSL_FEATURE_IGPIO_HAS_DR_SET (1)
+/* @brief Has data register clear DR_CLEAR. */
+#define FSL_FEATURE_IGPIO_HAS_DR_CLEAR (1)
+/* @brief Has data register toggle DR_TOGGLE. */
+#define FSL_FEATURE_IGPIO_HAS_DR_TOGGLE (1)
+
+/* LPI2C module features */
+
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPI2C_HAS_SEPARATE_DMA_RX_TX_REQn(x) (0)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPI2C_FIFO_SIZEn(x) (4)
+
+/* LPSPI module features */
+
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPSPI_FIFO_SIZEn(x) (16)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPSPI_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+
+/* LPUART module features */
+
+/* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */
+#define FSL_FEATURE_LPUART_HAS_IRQ_EXTENDED_FUNCTIONS (0)
+/* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_LOW_POWER_UART_SUPPORT (1)
+/* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_HAS_FIFO (1)
+/* @brief Has 32-bit register MODIR */
+#define FSL_FEATURE_LPUART_HAS_MODIR (1)
+/* @brief Hardware flow control (RTS, CTS) is supported. */
+#define FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT (1)
+/* @brief Infrared (modulation) is supported. */
+#define FSL_FEATURE_LPUART_HAS_IR_SUPPORT (1)
+/* @brief 2 bits long stop bit is available. */
+#define FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT (1)
+/* @brief If 10-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_10BIT_DATA_SUPPORT (1)
+/* @brief If 7-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT (1)
+/* @brief Baud rate fine adjustment is available. */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (0)
+/* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_RX_RESYNC_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (1)
+/* @brief Peripheral type. */
+#define FSL_FEATURE_LPUART_IS_SCI (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_FIFO_SIZEn(x) (4)
+/* @brief Supports two match addresses to filter incoming frames. */
+#define FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING (1)
+/* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_DMA_ENABLE (1)
+/* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */
+#define FSL_FEATURE_LPUART_HAS_DMA_SELECT (0)
+/* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BIT_ORDER_SELECT (1)
+/* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */
+#define FSL_FEATURE_LPUART_HAS_SMART_CARD_SUPPORT (0)
+/* @brief Has improved smart card (ISO7816 protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_IMPROVED_SMART_CARD_SUPPORT (0)
+/* @brief Has local operation network (CEA709.1-B protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0)
+/* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */
+#define FSL_FEATURE_LPUART_HAS_32BIT_REGISTERS (1)
+/* @brief Lin break detect available (has bit BAUD[LBKDIE]). */
+#define FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT (1)
+/* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */
+#define FSL_FEATURE_LPUART_HAS_WAIT_MODE_OPERATION (0)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+/* @brief Has separate RX and TX interrupts. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (0)
+/* @brief Has LPAURT_PARAM. */
+#define FSL_FEATURE_LPUART_HAS_PARAM (1)
+/* @brief Has LPUART_VERID. */
+#define FSL_FEATURE_LPUART_HAS_VERID (1)
+/* @brief Has LPUART_GLOBAL. */
+#define FSL_FEATURE_LPUART_HAS_GLOBAL (1)
+/* @brief Has LPUART_PINCFG. */
+#define FSL_FEATURE_LPUART_HAS_PINCFG (1)
+
+/* interrupt module features */
+
+/* @brief Lowest interrupt request number. */
+#define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+/* @brief Highest interrupt request number. */
+#define FSL_FEATURE_INTERRUPT_IRQ_MAX (133)
+
+/* OCOTP module features */
+
+/* @brief Has timing control, (register TIMING). */
+#define FSL_FEATURE_OCOTP_HAS_TIMING_CTRL (1)
+/* @brief Support lock eFuse word write lock, (CTRL[WORDLOCK]). */
+#define FSL_FEATURE_OCOTP_HAS_WORDLOCK (0)
+/* @brief Has status register. (Register HW_OCOTP_OUT_STATUS0). */
+#define FSL_FEATURE_OCOTP_HAS_STATUS (0)
+
+/* PIT module features */
+
+/* @brief Number of channels (related to number of registers LDVALn, CVALn, TCTRLn, TFLGn). */
+#define FSL_FEATURE_PIT_TIMER_COUNT (4)
+/* @brief Has lifetime timer (related to existence of registers LTMR64L and LTMR64H). */
+#define FSL_FEATURE_PIT_HAS_LIFETIME_TIMER (1)
+/* @brief Has chain mode (related to existence of register bit field TCTRLn[CHN]). */
+#define FSL_FEATURE_PIT_HAS_CHAIN_MODE (1)
+/* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */
+#define FSL_FEATURE_PIT_HAS_SHARED_IRQ_HANDLER (1)
+/* @brief Has timer enable control. */
+#define FSL_FEATURE_PIT_HAS_MDIS (1)
+
+/* PWM module features */
+
+/* @brief If (e)FlexPWM has module A channels (outputs). */
+#define FSL_FEATURE_PWM_HAS_CHANNELA (1)
+/* @brief If (e)FlexPWM has module B channels (outputs). */
+#define FSL_FEATURE_PWM_HAS_CHANNELB (1)
+/* @brief If (e)FlexPWM has module X channels (outputs). */
+#define FSL_FEATURE_PWM_HAS_CHANNELX (1)
+/* @brief If (e)FlexPWM has fractional feature. */
+#define FSL_FEATURE_PWM_HAS_FRACTIONAL (1)
+/* @brief If (e)FlexPWM has mux trigger source select bit field. */
+#define FSL_FEATURE_PWM_HAS_MUX_TRIGGER_SOURCE_SEL (1)
+/* @brief Number of submodules in each (e)FlexPWM module. */
+#define FSL_FEATURE_PWM_SUBMODULE_COUNT (4U)
+/* @brief Number of fault channel in each (e)FlexPWM module. */
+#define FSL_FEATURE_PWM_FAULT_CH_COUNT (1)
+
+/* RTWDOG module features */
+
+/* @brief Watchdog is available. */
+#define FSL_FEATURE_RTWDOG_HAS_WATCHDOG (1)
+/* @brief RTWDOG_CNT can be 32-bit written. */
+#define FSL_FEATURE_RTWDOG_HAS_32BIT_ACCESS (1)
+
+/* SAI module features */
+
+/* @brief Receive/transmit FIFO size in item count (register bit fields TCSR[FRDE], TCSR[FRIE], TCSR[FRF], TCR1[TFW], RCSR[FRDE], RCSR[FRIE], RCSR[FRF], RCR1[RFW], registers TFRn, RFRn). */
+#define FSL_FEATURE_SAI_FIFO_COUNT (32)
+/* @brief Receive/transmit channel number (register bit fields TCR3[TCE], RCR3[RCE], registers TDRn and RDRn). */
+#define FSL_FEATURE_SAI_CHANNEL_COUNTn(x) \
+    (((x) == SAI1) ? (4) : \
+    (((x) == SAI2) ? (1) : \
+    (((x) == SAI3) ? (1) : (-1))))
+/* @brief Maximum words per frame (register bit fields TCR3[WDFL], TCR4[FRSZ], TMR[TWM], RCR3[WDFL], RCR4[FRSZ], RMR[RWM]). */
+#define FSL_FEATURE_SAI_MAX_WORDS_PER_FRAME (32)
+/* @brief Has support of combining multiple data channel FIFOs into single channel FIFO (register bit fields TCR3[CFR], TCR4[FCOMB], TFR0[WCP], TFR1[WCP], RCR3[CFR], RCR4[FCOMB], RFR0[RCP], RFR1[RCP]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_COMBINE_MODE (1)
+/* @brief Has packing of 8-bit and 16-bit data into each 32-bit FIFO word (register bit fields TCR4[FPACK], RCR4[FPACK]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_PACKING (1)
+/* @brief Configures when the SAI will continue transmitting after a FIFO error has been detected (register bit fields TCR4[FCONT], RCR4[FCONT]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_FUNCTION_AFTER_ERROR (1)
+/* @brief Configures if the frame sync is generated internally, a frame sync is only generated when the FIFO warning flag is clear or continuously (register bit fields TCR4[ONDEM], RCR4[ONDEM]). */
+#define FSL_FEATURE_SAI_HAS_ON_DEMAND_MODE (1)
+/* @brief Simplified bit clock source and asynchronous/synchronous mode selection (register bit fields TCR2[CLKMODE], RCR2[CLKMODE]), in comparison with the exclusively implemented TCR2[SYNC,BCS,BCI,MSEL], RCR2[SYNC,BCS,BCI,MSEL]. */
+#define FSL_FEATURE_SAI_HAS_CLOCKING_MODE (0)
+/* @brief Has register for configuration of the MCLK divide ratio (register bit fields MDR[FRACT], MDR[DIVIDE]). */
+#define FSL_FEATURE_SAI_HAS_MCLKDIV_REGISTER (0)
+/* @brief Interrupt source number */
+#define FSL_FEATURE_SAI_INT_SOURCE_NUM (2)
+/* @brief Has register of MCR. */
+#define FSL_FEATURE_SAI_HAS_MCR (0)
+/* @brief Has bit field MICS of the MCR register. */
+#define FSL_FEATURE_SAI_HAS_NO_MCR_MICS (1)
+/* @brief Has register of MDR */
+#define FSL_FEATURE_SAI_HAS_MDR (0)
+/* @brief Has support the BCLK bypass mode when BCLK = MCLK. */
+#define FSL_FEATURE_SAI_HAS_BCLK_BYPASS (0)
+/* @brief Has DIV bit fields of MCR register (register bit fields MCR[DIV]. */
+#define FSL_FEATURE_SAI_HAS_MCR_MCLK_POST_DIV (0)
+/* @brief Support Channel Mode (register bit fields TCR4[CHMOD]). */
+#define FSL_FEATURE_SAI_HAS_CHANNEL_MODE (1)
+
+/* SNVS module features */
+
+/* @brief Has Secure Real Time Counter Enabled and Valid (bit field LPCR[SRTC_ENV]). */
+#define FSL_FEATURE_SNVS_HAS_SRTC (1)
+
+/* SRC module features */
+
+/* @brief There is MASK_WDOG3_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_MASK_WDOG3_RST (1)
+/* @brief There is MIX_RST_STRCH bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_MIX_RST_STRCH (0)
+/* @brief There is DBG_RST_MSK_PG bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_DBG_RST_MSK_PG (1)
+/* @brief There is WDOG3_RST_OPTN bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_WDOG3_RST_OPTN (0)
+/* @brief There is CORES_DBG_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_CORES_DBG_RST (0)
+/* @brief There is MTSR bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_MTSR (0)
+/* @brief There is CORE0_DBG_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_CORE0_DBG_RST (1)
+/* @brief There is CORE0_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_CORE0_RST (1)
+/* @brief There is LOCKUP_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_LOCKUP_RST (1)
+/* @brief There is SWRC bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_SWRC (0)
+/* @brief There is EIM_RST bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_EIM_RST (0)
+/* @brief There is LUEN bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_SCR_LUEN (0)
+/* @brief There is no WRBC bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_NO_SCR_WRBC (1)
+/* @brief There is no WRE bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_NO_SCR_WRE (1)
+/* @brief There is SISR register. */
+#define FSL_FEATURE_SRC_HAS_SISR (0)
+/* @brief There is RESET_OUT bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_RESET_OUT (0)
+/* @brief There is WDOG3_RST_B bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_WDOG3_RST_B (1)
+/* @brief There is JTAG_SW_RST bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_JTAG_SW_RST (1)
+/* @brief There is SW bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_SW (0)
+/* @brief There is IPP_USER_RESET_B bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_IPP_USER_RESET_B (1)
+/* @brief There is SNVS bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_SNVS (0)
+/* @brief There is CSU_RESET_B bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_CSU_RESET_B (1)
+/* @brief There is LOCKUP bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_LOCKUP (1)
+/* @brief There is LOCKUP_SYSRESETREQ bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_LOCKUP_SYSRESETREQ (0)
+/* @brief There is POR bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_POR (0)
+/* @brief There is IPP_RESET_B bit in SRSR register. */
+#define FSL_FEATURE_SRC_HAS_SRSR_IPP_RESET_B (1)
+/* @brief There is no WBI bit in SCR register. */
+#define FSL_FEATURE_SRC_HAS_NO_SRSR_WBI (1)
+
+/* SCB module features */
+
+/* @brief L1 ICACHE line size in byte. */
+#define FSL_FEATURE_L1ICACHE_LINESIZE_BYTE (32)
+/* @brief L1 DCACHE line size in byte. */
+#define FSL_FEATURE_L1DCACHE_LINESIZE_BYTE (32)
+
+/* TRNG module features */
+
+/* @brief TRNG has no TRNG_ACC bitfield. */
+#define FSL_FEATURE_TRNG_HAS_NO_TRNG_ACC (0)
+
+/* USBHS module features */
+
+/* @brief EHCI module instance count */
+#define FSL_FEATURE_USBHS_EHCI_COUNT (1)
+/* @brief Number of endpoints supported */
+#define FSL_FEATURE_USBHS_ENDPT_COUNT (8)
+
+/* USBPHY module features */
+
+/* @brief USBPHY contain DCD analog module */
+#define FSL_FEATURE_USBPHY_HAS_DCD_ANALOG (0)
+/* @brief USBPHY has register TRIM_OVERRIDE_EN */
+#define FSL_FEATURE_USBPHY_HAS_TRIM_OVERRIDE_EN (0)
+/* @brief USBPHY is 28FDSOI */
+#define FSL_FEATURE_USBPHY_28FDSOI (0)
+
+/* XBARA module features */
+
+/* @brief Number of interrupt requests. */
+#define FSL_FEATURE_XBARA_INTERRUPT_COUNT (4)
+
+#endif /* _MIMXRT1015_FEATURES_H_ */
+