1 files changed, 164 insertions, 0 deletions

diff --git a/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1024/project_template/board.h b/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1024/project_template/board.h
new file mode 100644
index 000000000..cdbfd1caf
--- /dev/null
+++ b/lib/chibios-contrib/ext/mcux-sdk/boards/evkmimxrt1024/project_template/board.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#include "clock_config.h"
+#include "fsl_common.h"
+#include "fsl_gpio.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief The board name */
+#define BOARD_NAME "MIMXRT1024-EVK"
+
+/* The UART to use for debug messages. */
+#define BOARD_DEBUG_UART_TYPE     kSerialPort_Uart
+#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART1
+#define BOARD_DEBUG_UART_INSTANCE 1U
+
+#define BOARD_DEBUG_UART_CLK_FREQ BOARD_DebugConsoleSrcFreq()
+
+#define BOARD_UART_IRQ         LPUART1_IRQn
+#define BOARD_UART_IRQ_HANDLER LPUART1_IRQHandler
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE
+#define BOARD_DEBUG_UART_BAUDRATE (115200U)
+#endif /* BOARD_DEBUG_UART_BAUDRATE */
+
+/* @Brief Board accelerator sensor configuration */
+#define BOARD_ACCEL_I2C_BASEADDR             LPI2C4
+#define BOARD_ACCEL_I2C_CLOCK_SOURCE_SELECT  (0U)
+#define BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER (5U)
+#define BOARD_ACCEL_I2C_CLOCK_FREQ           (CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER + 1U))
+
+#define BOARD_CODEC_I2C_BASEADDR             LPI2C1
+#define BOARD_CODEC_I2C_INSTANCE             1U
+#define BOARD_CODEC_I2C_CLOCK_SOURCE_SELECT  (0U)
+#define BOARD_CODEC_I2C_CLOCK_SOURCE_DIVIDER (5U)
+#define BOARD_CODEC_I2C_CLOCK_FREQ           (10000000U)
+
+/*! @brief The USER_LED used for board */
+#define LOGIC_LED_ON  (1U)
+#define LOGIC_LED_OFF (0U)
+#ifndef BOARD_USER_LED_GPIO
+#define BOARD_USER_LED_GPIO GPIO1
+#endif
+#ifndef BOARD_USER_LED_GPIO_PIN
+#define BOARD_USER_LED_GPIO_PIN (24U)
+#endif
+
+#define USER_LED_INIT(output)                                            \
+    GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, output); \
+    BOARD_USER_LED_GPIO->GDIR |= (1U << BOARD_USER_LED_GPIO_PIN) /*!< Enable target USER_LED */
+#define USER_LED_OFF() \
+    GPIO_PortClear(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN)                  /*!< Turn off target USER_LED */
+#define USER_LED_ON() GPIO_PortSet(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!<Turn on target USER_LED*/
+#define USER_LED_TOGGLE()                                       \
+    GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, \
+                  0x1 ^ GPIO_PinRead(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN)) /*!< Toggle target USER_LED */
+
+/*! @brief Define the port interrupt number for the board switches */
+#ifndef BOARD_USER_BUTTON_GPIO
+#define BOARD_USER_BUTTON_GPIO GPIO5
+#endif
+#ifndef BOARD_USER_BUTTON_GPIO_PIN
+#define BOARD_USER_BUTTON_GPIO_PIN (0U)
+#endif
+#define BOARD_USER_BUTTON_IRQ         GPIO5_Combined_0_15_IRQn
+#define BOARD_USER_BUTTON_IRQ_HANDLER GPIO5_Combined_0_15_IRQHandler
+#define BOARD_USER_BUTTON_NAME        "SW4"
+
+/*! @brief The board flash size */
+#define BOARD_FLASH_SIZE (0x400000U)
+
+/*! @brief The ENET PHY address. */
+#define BOARD_ENET0_PHY_ADDRESS (0x02U) /* Phy address of enet port 0. */
+
+/* USB PHY condfiguration */
+#define BOARD_USB_PHY_D_CAL     (0x0CU)
+#define BOARD_USB_PHY_TXCAL45DP (0x06U)
+#define BOARD_USB_PHY_TXCAL45DM (0x06U)
+
+#define BOARD_ARDUINO_INT_IRQ   (GPIO1_Combined_16_31_IRQn)
+#define BOARD_ARDUINO_I2C_IRQ   (LPI2C4_IRQn)
+#define BOARD_ARDUINO_I2C_INDEX (4)
+/*! @brief The WIFI-QCA shield pin. */
+#define BOARD_INITGT202SHIELD_PWRON_GPIO      GPIO1               /*!< GPIO device name: GPIO */
+#define BOARD_INITGT202SHIELD_PWRON_PORT      1U                  /*!< PORT device index: 1 */
+#define BOARD_INITGT202SHIELD_PWRON_GPIO_PIN  23U                 /*!< PIO4 pin index: 23 */
+#define BOARD_INITGT202SHIELD_PWRON_PIN_NAME  GPIO1_23            /*!< Pin name */
+#define BOARD_INITGT202SHIELD_PWRON_LABEL     "PWRON"             /*!< Label */
+#define BOARD_INITGT202SHIELD_PWRON_NAME      "PWRON"             /*!< Identifier name */
+#define BOARD_INITGT202SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
+
+#define BOARD_INITGT202SHIELD_IRQ_GPIO      GPIO1              /*!< GPIO device name: GPIO */
+#define BOARD_INITGT202SHIELD_IRQ_PORT      1U                 /*!< PORT device index: 1 */
+#define BOARD_INITGT202SHIELD_IRQ_GPIO_PIN  22U                /*!< PIO1 pin index: 22 */
+#define BOARD_INITGT202SHIELD_IRQ_PIN_NAME  GPIO1_22           /*!< Pin name */
+#define BOARD_INITGT202SHIELD_IRQ_LABEL     "IRQ"              /*!< Label */
+#define BOARD_INITGT202SHIELD_IRQ_NAME      "IRQ"              /*!< Identifier name */
+#define BOARD_INITGT202SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
+
+/* Display. */
+#define BOARD_LCD_DC_GPIO     GPIO1 /*! LCD data/command port */
+#define BOARD_LCD_DC_GPIO_PIN 15U   /*! LCD data/command pin */
+
+/* @Brief Board Bluetooth HCI UART configuration */
+#define BOARD_BT_UART_BASEADDR    LPUART3
+#define BOARD_BT_UART_CLK_FREQ    BOARD_DebugConsoleSrcFreq()
+#define BOARD_BT_UART_IRQ         LPUART3_IRQn
+#define BOARD_BT_UART_IRQ_HANDLER LPUART3_IRQHandler
+
+/*! @brief board has sdcard */
+#define BOARD_HAS_SDCARD (1U)
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+uint32_t BOARD_DebugConsoleSrcFreq(void);
+
+void BOARD_InitDebugConsole(void);
+void BOARD_ConfigMPU(void);
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_InitDebugConsole(void);
+void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
+status_t BOARD_LPI2C_Send(LPI2C_Type *base,
+                          uint8_t deviceAddress,
+                          uint32_t subAddress,
+                          uint8_t subaddressSize,
+                          uint8_t *txBuff,
+                          uint8_t txBuffSize);
+status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
+                             uint8_t deviceAddress,
+                             uint32_t subAddress,
+                             uint8_t subaddressSize,
+                             uint8_t *rxBuff,
+                             uint8_t rxBuffSize);
+void BOARD_Accel_I2C_Init(void);
+status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
+status_t BOARD_Accel_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+void BOARD_Codec_I2C_Init(void);
+status_t BOARD_Codec_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Codec_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+void BOARD_SD_Pin_Config(uint32_t speed, uint32_t strength);
+void BOARD_MMC_Pin_Config(uint32_t speed, uint32_t strength);
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+#endif /* _BOARD_H_ */