1 files changed, 205 insertions, 0 deletions

diff --git a/lib/chibios-contrib/os/hal/boards/EXP430FR6989/board.h b/lib/chibios-contrib/os/hal/boards/EXP430FR6989/board.h
new file mode 100644
index 000000000..4561feacc
--- /dev/null
+++ b/lib/chibios-contrib/os/hal/boards/EXP430FR6989/board.h
@@ -0,0 +1,205 @@
+/*
+    ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the EXP430FR6989 LaunchPad board
+ */
+
+/* NOTE: LCD segment pins configured as unused - controlled by LCD driver if
+ * present
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_EXP430FR6989
+#define BOARD_NAME "MSP430FR6989 LaunchPad"
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_LED_R                                PAL_LINE(IOPORT1, 0U)
+#define LINE_LED_G                                PAL_LINE(IOPORT5, 7U)
+#define LINE_SW_S1                                PAL_LINE(IOPORT1, 1U)
+#define LINE_SW_S2                                PAL_LINE(IOPORT1, 2U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the MSP430X Family Users Guide for details.
+ */
+/*
+ * Port A setup:
+ * 
+ * P1.0 - Red LED                 (output low)
+ * P1.1 - Switch S1               (input pullup falling-edge interrupt)
+ * P1.2 - Switch S2               (input pullup falling-edge interrupt)
+ * P1.3 - BoosterPack BP34        (input pullup)
+ * P1.4 - BoosterPack BP7         (input pullup)
+ * P1.5 - BoosterPack BP18        (input pullup)
+ * P1.6 - BoosterPack BP15        (input pullup)
+ * P1.7 - BoosterPack BP14        (input pullup)
+ * P2.0 - BoosterPack BP8         (input pullup)
+ * P2.1 - BoosterPack BP19        (input pullup)
+ * P2.2 - BoosterPack BP35        (input pullup)
+ * P2.3 - BoosterPack BP31        (input pullup)
+ * P2.4 - BoosterPack BP12        (input pullup)
+ * P2.5 - BoosterPack BP13        (input pullup)
+ * P2.6 - BoosterPack BP39        (input pullup)
+ * P2.7 - BoosterPack BP40        (input pullup)
+ */
+#define VAL_IOPORT1_OUT   0xFFFE
+#define VAL_IOPORT1_DIR   0x0001
+#define VAL_IOPORT1_REN   0xFFFE
+#define VAL_IOPORT1_SEL0  0x0000
+#define VAL_IOPORT1_SEL1  0x0000
+
+/*
+ * Port B setup:
+ * 
+ * P3.0 - BoosterPack BP33        (input pullup)
+ * P3.1 - BoosterPack BP32        (input pullup)
+ * P3.2 - BoosterPack BP5         (input pullup)
+ * P3.3 - BoosterPack BP38        (input pullup)
+ * P3.4 - Application UART TX     (alternate 1)
+ * P3.5 - Application UART RX     (alternate 1)
+ * P3.6 - BoosterPack BP37        (input pullup)
+ * P3.7 - BoosterPack BP36        (input pullup)
+ * P4.0 - BoosterPack BP10        (input pullup)
+ * P4.1 - BoosterPack BP9         (input pullup)
+ * P4.2 - BoosterPack BP4         (input pullup)
+ * P4.3 - BoosterPack BP3         (input pullup)
+ * P4.4 - LCD S8                  (input pullup)
+ * P4.5 - LCD S7                  (input pullup)
+ * P4.6 - LCD S6                  (input pullup)
+ * P4.7 - BoosterPack BP11        (input pullup)
+ */
+#define VAL_IOPORT2_OUT   0xFFCF
+#define VAL_IOPORT2_DIR   0x0000
+#define VAL_IOPORT2_REN   0xFFCF
+#define VAL_IOPORT2_SEL0  0x0030
+#define VAL_IOPORT2_SEL1  0x0000
+
+/*
+ * Port C setup:
+ * 
+ * P5.0 - LCD S38                 (input pullup)
+ * P5.1 - LCD S37                 (input pullup)
+ * P5.2 - LCD S36                 (input pullup)
+ * P5.3 - LCD S35                 (input pullup)
+ * P5.4 - LCD S12                 (input pullup)
+ * P5.5 - LCD S11                 (input pullup)
+ * P5.6 - LCD S10                 (input pullup)
+ * P5.7 - LCD S9                  (input pullup)
+ * P6.0 - LCD R23                 (input pullup)
+ * P6.1 - LCD R13                 (input pullup)
+ * P6.2 - LCD R03                 (input pullup)
+ * P6.3 - LCD COM0                (input pullup)
+ * P6.4 - LCD COM1                (input pullup)
+ * P6.5 - LCD COM2                (input pullup)
+ * P6.6 - LCD COM3                (input pullup)
+ * P6.7 - LCD S31                 (input pullup)
+ */
+#define VAL_IOPORT3_OUT   0xFFFF
+#define VAL_IOPORT3_DIR   0x0000
+#define VAL_IOPORT3_REN   0xFFFF
+#define VAL_IOPORT3_SEL0  0x0000
+#define VAL_IOPORT3_SEL1  0x0000
+
+/*
+ * Port D setup:
+ * 
+ * P7.0 - LCD S17                 (input pullup)
+ * P7.1 - LCD S16                 (input pullup)
+ * P7.2 - LCD S15                 (input pullup)
+ * P7.3 - LCD S14                 (input pullup)
+ * P7.4 - LCD S13                 (input pullup)
+ * P7.5 - LCD S30                 (input pullup)
+ * P7.6 - LCD S29                 (input pullup)
+ * P7.7 - LCD S27                 (input pullup)
+ * P8.0 - LCD S21                 (input pullup)
+ * P8.1 - LCD S20                 (input pullup)
+ * P8.2 - LCD S19                 (input pullup)
+ * P8.3 - LCD S18                 (input pullup)
+ * P8.4 - BoosterPack BP23        (input pullup)
+ * P8.5 - BoosterPack BP24        (input pullup)
+ * P8.6 - BoosterPack BP25        (input pullup)
+ * P8.7 - BoosterPack BP26        (input pullup)
+ */
+#define VAL_IOPORT4_OUT   0xFFFF
+#define VAL_IOPORT4_DIR   0x0000
+#define VAL_IOPORT4_REN   0xFFFF
+#define VAL_IOPORT4_SEL0  0x0000
+#define VAL_IOPORT4_SEL1  0x0000
+
+/*
+ * Port E setup:
+ * 
+ * P9.0 - BoosterPack BP27        (input pullup)
+ * P9.1 - BoosterPack BP28        (input pullup)
+ * P9.2 - BoosterPack BP2         (input pullup)
+ * P9.3 - BoosterPack BP6         (input pullup)
+ * P9.4 - BoosterPack BP17        (input pullup)
+ * P9.5 - BoosterPack BP29        (input pullup)
+ * P9.6 - BoosterPack BP30        (input pullup)
+ * P9.7 - Green LED               (output low)
+ * P10.0 - LCD S4                 (input pullup)
+ * P10.1 - LCD S28                (input pullup)
+ * P10.2 - LCD S39                (input pullup)
+ * P10.3 - N/C Internally         (input pullup)
+ * P10.4 - N/C Internally         (input pullup)
+ * P10.5 - N/C Internally         (input pullup)
+ * P10.6 - N/C Internally         (input pullup)
+ * P10.7 - N/C Internally         (input pullup)
+ */
+#define VAL_IOPORT5_OUT   0xFF7F
+#define VAL_IOPORT5_DIR   0x0080
+#define VAL_IOPORT5_REN   0xFF7F
+#define VAL_IOPORT5_SEL0  0x0000
+#define VAL_IOPORT5_SEL1  0x0000
+
+/*
+ * Port J setup:
+ * 
+ * PJ.0 - TDO                     (input pullup)
+ * PJ.1 - TDI                     (input pullup)
+ * PJ.2 - TMS                     (input pullup)
+ * PJ.3 - TCK                     (input pullup)
+ * PJ.4 - LFXIN                   (alternate 1)
+ * PJ.5 - LFXOUT                  (alternate 1)
+ * PJ.6 - HFXIN (N/C)             (input pullup)
+ * PJ.7 - HFXOUT (N/C)            (input pullup)
+ */
+#define VAL_IOPORT0_OUT   0x00FF
+#define VAL_IOPORT0_DIR   0x0000
+#define VAL_IOPORT0_REN   0x00CF
+#define VAL_IOPORT0_SEL0  0x0030
+#define VAL_IOPORT0_SEL1  0x0000
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */